Database Develop

help needed ( i did read WIKIs FAQ... )

i think you need to know this before i begin...
PH20B 0 B ENG G T-MOB008 1.06.00 0 0 1.06.116 1.00.00 00.00
SIM: ORANGE
SOLD AS: T-MOBILE QTEK 9060
SIM UNLOCKED by T-MOBILE
MODEL: PH20B
LANG: WWE
ROM: 1.06.00 ENG
RADIO: 1.00.00
PROTOCOL: 1337.30
EXT ROM: 1.06.116 WWE
So u see i have a pretty old ROM. I was reading the WIKIs FAQ (How to upgrade to the lastest ROM) and everything was clear until i hit the Getting started section (((#How do I find the correct upgrade ROM that will work for me?))), now i'm absolutly not sure about what to do. There is NO upgrade for my T-MOB008 so i don't know what should i download in stead.
I was thinking about iMate PDA2K_WWE_14000_176_11200 and about overwriting the radio_.nbf with the new 1.13.00 ver, so i would not need to update RADIO again and i would use the MaUpgradeUt_noID.exe to UPGRADE cause of the different versions. So am i right or no ?
And i have 1 more question can i use Xbackup to backup contacts and apointments and after the upgrade restore them or do i have to create them again manualy ?
thx for any kind of help :wink:

Well it seems for a person that got stuck you picked up all the needed info.
The wiki page with the roms has got lost, I will just jot down a few steps for you details can be found in wiki.
If you use blackberry then it seems you need to stay with radio 1.06.
1 unlock ext rom and save files to pc. (wiki kitchen)
2 sync cotacts to outllook
3 save any docs data you need
4 run the imate 1.40 wiki upgrade
5 run the radio 1.13 upgrade (dont mix the files)
6 unlock ext rom and remove the I-mate carrier cabs (wiki kitchen available ext roms will list them.)
7 add the t-mobile carrier cabs back to device, edit config.txt
8 reset and have fun.

thx for reply...
so here is whats happened:
i got all to the point 4 but when i run the maupgradeut_noid.exe after somethink like 30seconds the ACTIVE SYNC disconnects and i get an ****RY ERROR. THE BA screen is completly BLACK and won't start when i push the POWER BUTTON. I have to take out battery and then it's working( but the device is hard reseted ).
i tried to run the maupgradeut_noid.exe again like the WIKIs FAQ saiz but it's not detecting the BA. I use the cradle via USB connection.
should i edit the RUU.CONF ? or is it getting too high risk ?

Did you use the files from wiki ?
Reboot the pc or kill the active sync session and re run the maupgradeut_noid.exe. You might need to run it twice so after the first error close it and rerun it.
Lets work on the normal way before we try the other tricks.

i forgot to say that i did get all the way to the UPGRADE button and after i pushed it then i did get the COUNTRY ID ERROR.
It happened in the UPGRADING PROCESS. :shock:

Then you did not use the maupgradeut_noid.exe twice

sorry about not answering i had some house moving problems :lol:
i have done the upgrade just like u said it's working.
only the config.txt did not need modification there was an autorun.exe
thx very much :lol:

I have the simillar pb
MDAIIIUser said:
Then you did not use the maupgradeut_noid.exe twice
Click to expand...
Click to collapse
Procedures mentioned XDA Developers do not work.
RUU.log shows:
16:06:42:715 [msg] : Version : [1.5.0-1.0.0.1].
16:06:42:745 [msg] : Config Info : [667685],[1],[0],[0].
16:06:42:745 [msg] : RadioFile Not Exist !
16:06:42:755 [msg] : MSystemFile Not Exist !
16:06:46:751 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
16:06:50:847 [msg] : Disconnect ActiveSync .... [2]
16:06:50:997 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
16:06:53:100 [msg] : Device BL VER : [2.08 ] [].
16:06:53:100 [err] : Device CID Error.
16:06:53:100 [msg] : Update Image. CE : [4], MSystem : [0], Radio : [0]
16:06:54:672 [msg] : Check Ac in BL mode. AC : [1]
16:06:56:175 [msg] : IsBL. BL : [1]
16:07:01:222 [msg] : =============================================
16:07:01:222 [msg] : START UpdateCE !
16:07:02:303 [msg] : Upgrade 0 : 0 Start.
16:08:36:649 [err] : Wipe Data Error.
16:08:36:649 [err] : BL UpdateCE Error.
16:08:36:649 [msg] : START UnInitialization !
16:08:36:659 [msg] : END UnInitialization !
16:08:36:679 [msg] : IsBL. BL : [1]
In this stage "Wipe Data Error." becomes display black and starts in bootloader mode after hard reset only.

KDZ updaters AND LD mobile support tool do not find phone.

First off some details about my phone:
LG GT540 T-Mobile UK
1.6 donut
When I connect my phone to the computer, the phone and the computer do recognize it (but only as a storage device once I have mounted it). I have installed the drivers for the phone (I have tried on 3 different computers). KDZ firmware updater does not find my phone with this error:
[R&D Test Tools Log File]
17:33:42 : Launching SW update
17:33:42 : Unpacking KDZ
17:33:49 : KDZ file extraced
17:33:54 : Files were extracted.
17:33:54 : LGMobileDL Load.
17:33:54 : Port = -1
17:33:54 : Connecting to phone
17:33:54 : PHONE WAS NOT FOUND!
17:33:56 : ===FINISHED===
Lg mobile support tool does not even find it at all. I have googled and have found nothing that can help me.
Oh, i am using the kindle USB cable as well (should still work though, right?)

English kdz? Android lg modem turned off?
Sent from my GT540 using Tapatalk

What should it matter about the language of my KDZ when it can't even find my phone?
And what lg Modem?

Install PC suite Drivers while phone is not pluged into usb.

It is matter, 4 russian U need 'windows enabler' 4 english not xd - is better. Lg android modem have to be off in system settings.
Sent from my GT540 using Tapatalk

Ah, sorry i thought you meant the kdz file, no i am using the english version. also mobile system settings or windows system setting?
LG pc Suite wor- OH GOD IT WORKS THANK YOU!

Windows (devices manager) can't find rigth word. Off also antivirus/firewall protection be4
Sent from my GT540 using Tapatalk

hogofwar said:
First off some details about my phone:
LG GT540 T-Mobile UK
1.6 donut
When I connect my phone to the computer, the phone and the computer do recognize it (but only as a storage device once I have mounted it). I have installed the drivers for the phone (I have tried on 3 different computers). KDZ firmware updater does not find my phone with this error:
[R&D Test Tools Log File]
17:33:42 : Launching SW update
17:33:42 : Unpacking KDZ
17:33:49 : KDZ file extraced
17:33:54 : Files were extracted.
17:33:54 : LGMobileDL Load.
17:33:54 : Port = -1
17:33:54 : Connecting to phone
17:33:54 : PHONE WAS NOT FOUND!
17:33:56 : ===FINISHED===
Lg mobile support tool does not even find it at all. I have googled and have found nothing that can help me.
Oh, i am using the kindle USB cable as well (should still work though, right?)
Click to expand...
Click to collapse
Hi i downloaded the ZIP file when i try to Unzip it my McAfee anti virus found 2 virus in that file and deleted those files
1.EnablerDLL.dll
2.Windows Enabler.exe
After that i tried to run the .BAT file and i tried to ROOT my phone then it is saying no device found wat to do ??

I got da same log two hours past use english version of KDZ! Is so much better.
http://forum.xda-developers.com/showthread.php?t=810271

Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist", disbale Modem Driver. Dont boot with USB cable. Put the cable into the phone _after_ boot in downloadmode.
Close all Antivir programms!

ANd it has stopped working again, i followed all teh steps i did before and it refuses to find the phone.

keep trying different things like put it in download mode and try that.

How do i put the gt540 into download mode.

Vol up + Camera and power on

[GUIDE] Enable Internet Sharing on Omnia 7

Link: "http://bit.ly/sgA8o1" (copy paste this in your browser as i apparently can not post links, sorry!)
Folow the guide on that page or:
Code:
Want that fancy WiFi Hotspot internet sharing Tethering feature on you Windows Phone 7 device? If you are a Samsung Omnia 7 owner today is your lucky day. T-Mobile Germany pushed out a new firmware last night version I8700XXKI4 with the tethering / Internet Sharing feature enabled (thanks for the tip guys!). I’m a nice guy so I grabbed the firmware file and uploaded it so you can manually install it on your handset. Follow the instructions below (same a before and I’m not responsible if it doesn’t work for you):
- Download the firmware here (remember that’s not the OS but only the firmware bits) then download the WPupdate tools from here.
- Unzip the Tools in a folder then unzip the firmware in the same folder as the tools.
- Plug in your device, wait until the Zune client starts and then close it.
- Run the the Updater and press S or B (depending on the size of your balls..)
- your phone will then reboot in download mode and update (don’t unplug it or do stupid things with your PC during the whole process..)
Please note that this won’t work if you are running the latest I8700XXKI3 firmware from SFR (there’s a conflict with the 5.9.1.4 bootloader and maybe others too) so you will have to painfully revert back to an older firmware like the T-Mobile RC1 here (I8700XXKH2).
You should then have the following:
OS Version: 7.10.7720.68
Firmware revision number: 2424.11.9.4
Hardware revision number: 3.15.0.4
Radio software version: 2424.11.9.1
Radio hardware version: 0.0.0.800
Bootloader version: 5.9.3.0
Chip SOC version: 0.36.2.0
Enjoy tethering your handset!
Direct Rom download link: http://bit.ly/rOyGCG
Direct Tools download link: http://bit.ly/sOTNzl
P.s: That is not my guide! I had the French SFR bootloader problem, i reverted as he said and it worked seamlesly. You loose all data though!

didn't work for me, unbranded omnia7
here's error from logs dir "UpdateErrors"
ERROR: E_GENERAL_FILE_COLLISION : File Name: CSC_Config.xml :
Following Package on the Device already contains this file:
Package: CSCPackage FROM Version: 0.0.0.0 TO Version: 2250.19.7389.4880 GUID = {C3AD84D2-E6AB-4FEF-9DC8-C76A9A864731}
But following Update Package is causing a File Collision because it also contains this file and it is trying to add it to the Device :
Package: \OSRoot\Application Data\Microsoft\DeviceUpdate\Packages\5FF6E1CF-87C8-4B68-A2B6-B7912F7292AE.1.pks\I8700DTMKI4.cab.pkg FROM Version: 0.0.0.0 TO Version: 2250.19.7720.6464 GUID = {39813B40-A115-11DF-981C-0800200C9A66}
ProcessGraphs :CheckFileOwnsership returned E_GENERAL_FILE_COLLISSION
ERROR: UpdateOrderFromFileList: MAIN OS Update: MAIN OS Update Failed with HRESULT : 0x8018001e
=====================================================================
GOOD PACKAGES AND BAD PACKAGES LIST
=====================================================================
UpdateOrderFromFileList failed with code 0x8018001e
BAD PACKAGE: I8700DTMKI4.cab.pkg ERROR CODE: 0x8018001E Total number of Bad Packages: 1
Process Failed with code 0x8018001e
UpdateValidator finished at 06:30:19 02/28/1980
================================================
START OF ULDR \ UPDATEAPP ERROR MESSAGES
ERROR: 0x8018001e : Updatevalidator in ULDR reported this error. Update cannot continue.
ideas on how to avoid it???

yes, i had the same error, just follow the instructions on that page, install the older mango version

here is the post where you downgrade your mango rom.
http://bit.ly/pK0v0N
Beware!!! If you follow the instructions in that post you will void your warranty, your new rom will be a T-mobile german rom (you will have to manualy change the language in english), t-mobile also will be all over your phone, lot's of crappy apps that you will have to uninstall manualy! Your search provider in internet explorer will be a combination of tmobile and german google, you can change that in the settings menu.
Direct Link for the rom Download http://bit.ly/tvsHop
In the archive you will find a bunch of files.
* WP7 Downloader Ver 7.41 for Publish (Add OASIS Latin).exe
* Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0.exe
* PDA_I8700XXKH2_sec.nb0
* I8700XXKG2_02_RC1.bin
* I8700DTMKH2_ENG.PKS
* EBOOT_I8700XXKH2_CO04_REV02_sec.eb0
* CSC_I8700DTMKH2.csc
First unarchive in a folder.
Then install the samsung mobile driver (if you don't already have it)
Open the app WP7 Downloader Ver 7.41
load everything like in the attached photo
put your phone in download mode (with phone turned off press volUp+cameraButton and then power up while keeping those buttons pressed)
connect the phone and press start. Don't do any funny stuff on your pc. I prefer to do that on a laptop with full battery charge and plugged in!
After this install your phone should look like this :
Software: windows phone 7.5
os version: 7.10.7720.68
firmware revision number: 2424.11.8.2
hardware rev number: 3.15.0.4
radio soft. vers.: 2424.11.7.2
radio hardw. vers.: 0.0.0.800
Bootloader: 5.8.0.8
Chip SOC version 0.36.2.0
Now you can update to the new T-mobile rom that has thethering enabled!

thanks for the info but I think i will just wait for an official unbranded update maybe...
My omnia was a branded T-mobile DE before and i unbrande just because i don't like splash screens of something I'm not using
It's like having a bmw with a ducati engine

I have a tablet with no 3g so i was kinda desperate!

tool / updater

well found this : not sure why if says phone not found:?

[Q] Phone not booting, please help, i beg

After i installed, latest busybox using busybox pro, my phone dosen't boot. Please help. I beg you all. My mom will beat me if she gets to know i destroyed my phone. All i want is it to see in complete stock. And as i know we can not get into clockwork recovery mode with latest busybox, using smart install.

Subhajitdas298 said:
After i installed, latest busybox using busybox pro, my phone dosen't boot. Please help. I beg you all. My mom will beat me if she gets to know i destroyed my phone. All i want is it to see in complete stock. And as i know we can not get into clockwork recovery mode with latest busybox, using smart install.
Click to expand...
Click to collapse
Relax
Turn OFF the phone, just press "Vol-" and "Power Button" untill you feal the vibration.
You'll be in Android system recovery. Choose "wipe data/ factory reset" (volume keys to select), press "Power Button" to execute, in next step choose "yes-wipe data" (something like that) and press "power button" again.
Wait untill the phone shows you the option restart/reboot, select and execute.

you can flash kdz to save your phone without wiping,.good luck

Tim_Pan said:
you can flash kdz to save your phone without wiping,.good luck
Click to expand...
Click to collapse
If busybox is not wiped the problem remains... I'm even wondering if factory reset will solve the problem once that most part of the times root remains.
If it don't, only web upgrade or LG Tool Upgrade will reset to factory default.

RuedasLocas said:
If busybox is not wiped the problem remains... I'm even wondering if factory reset will solve the problem once that most part of the times root remains.
If it don't, only web upgrade or LG Tool Upgrade will reset to factory default.
Click to expand...
Click to collapse
The busybox was installed in system,wasn't it?
or i misunderstood it..

Tim_Pan said:
The busybox was installed in system,wasn't it?
or i misunderstood it..
Click to expand...
Click to collapse
thank you both for taking interest.busybox is in. Thats the problem. And i was thinking to get into clockwork mode. Can you please tell me how to get in. Cause i saw a post saying custom recovery not working with latest busybox(v1.20.2).
Or any way that can make my phone stock.
I was thinking any option in lg pc suite or something.
Please i need tutorial and perfect method. Please help.

Subhajitdas298 said:
thank you both for taking interest.busybox is in. Thats the problem. And i was thinking to get into clockwork mode. Can you please tell me how to get in. Cause i saw a post saying custom recovery not working with latest busybox(v1.20.2).
Or any way that can make my phone stock.
I was thinking any option in lg pc suite or something.
Please i need tutorial and perfect method. Please help.
Click to expand...
Click to collapse
Just open LG PC Suite, Device, Emergency Firmware Recover (or something like that, mine is in portuguese, sorry).
Just follow the program instructions.
If it don't work, you'll need to flash via kdz...
Good luck

I'm sure resetting to factory would be enough. Sounds like its just a soft brick. Factory reset will wipe everything you have on the phone but won't touch your sd card. It will turn your phone to completely stock or like out of the box condition software wise.
Vol - + Power and you should be good.

hi first off all id like to say thankyou for such a great site, 2nd is im having the same problem as the original poster here. i updated busybox and now when i start the phone it goes past the boot logo then sticks on opening programs. i have tried the wipe/factory reset and it doesnt work(i guess its due to busybox installs to a system folder, and ive tried to follow the video guide on updating with the kdz file, the problem im having is one that is shown in the video-where its saying the phone isnt connected and the driver for the lgusbmodem wont load,now im unable to understand what it is that you do to fix it(my bad sorry), could you englighten me as to what i need to do
thankyou for any help your able to give and its greatly appreciated

I said before that I had my doubts, even about factory reset...
Busybox is part of the "root", and as we know, factory reset not always "unroot" (very rare).
My advice is, Emergency Software Recovery, in LG PC Suite, or use the "UpTestEX_mod2_marwin.exe" and performe a "Web Upgrade".
Good luck :good:

Hi thankyou for your speedy response,the one problem i keep running into now is if i connect i s/w upgrade mode it says "this device is not configured correctly. (Code 1)
The system cannot find the file specified.
To find a driver for this device, click Update Driver.
i have the latest drivers installed so ive tried clicking update driver i then get the following " windows found driver software for your device but encountered an error attempting to install it. then says LGE Mobile composite USB device - the system cannot find the file specified
Once again thankyou for any help you can give,im really annoyed with myself for even messing about with the best phone ive had,when i try the update tool through the lg recovery it says updating is not possible any longer due to a fatal error while the LG Mobile Phone Software update

I think your running too fast to get nowhere... First relax, pay attention to the tutorials and advices inside of the thread. Now I can't but, if tomorrow you still have the problem, I'll give you a "hand".
Sent from my LG-P880 using xda app-developers app

RuedasLocas said:
I think your running too fast to get nowhere... First relax, pay attention to the tutorials and advices inside of the thread. Now I can't but, if tomorrow you still have the problem, I'll give you a "hand".
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thankyou,i guess your correct as im in a sort of panic which then would cause errors,your a great guy thanks for your help

friartuckme said:
hi first off all id like to say thankyou for such a great site, 2nd is im having the same problem as the original poster here. i updated busybox and now when i start the phone it goes past the boot logo then sticks on opening programs. i have tried the wipe/factory reset and it doesnt work(i guess its due to busybox installs to a system folder, and ive tried to follow the video guide on updating with the kdz file, the problem im having is one that is shown in the video-where its saying the phone isnt connected and the driver for the lgusbmodem wont load,now im unable to understand what it is that you do to fix it(my bad sorry), could you englighten me as to what i need to do
thankyou for any help your able to give and its greatly appreciated
Click to expand...
Click to collapse
friartuckme said:
Hi thankyou for your speedy response,the one problem i keep running into now is if i connect i s/w upgrade mode it says "this device is not configured correctly. (Code 1)
The system cannot find the file specified.
To find a driver for this device, click Update Driver.
i have the latest drivers installed so ive tried clicking update driver i then get the following " windows found driver software for your device but encountered an error attempting to install it. then says LGE Mobile composite USB device - the system cannot find the file specified
Once again thankyou for any help you can give,im really annoyed with myself for even messing about with the best phone ive had,when i try the update tool through the lg recovery it says updating is not possible any longer due to a fatal error while the LG Mobile Phone Software update
Click to expand...
Click to collapse
can you connect the phone through Single ADB Interface(Vol+ & Power)?
maybe you can use adb to replace or reinstall the old busybox.

hi thankyou for your help , ive tried this method once and it was like it hadnt connected to the phone ,in the command window it seemed to still be waiting for a connection, ive just tried using the offline method with UpTestEX_mod2_marwin and the http server and windows enabler and managed to get it to connected but after extracting everthing it sticks on 4%,heres part of the log from it, im willing to give a good contribution to whoever manages to help me fix this,i wish i could afford to give many people a donation here as there is many great people
03:15:25 : [C:\LGMobileUpgrade] Try to delete folder
03:15:25 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
03:15:25 : Start Date : 2012-12-28 03:15:25
03:15:25 : ---------- QM Testmode ---------
03:15:25 : ***** Check Tool Version *****
03:15:25 : Tool version : 1.5.4.8
03:15:25 : UpgradeDLL version : 1.2.6.7
03:15:25 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
03:15:25 : LGE USB Driver Version :
03:15:25 : Android PDLV Version :
03:15:25 : Android NDLV Version :
03:15:25 : ******************************************
03:15:25 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
03:15:25 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
03:15:25 : SetEmerModeAT()
03:15:25 : _IsConnectedPhone Call
03:15:25 : _IsConnectedPhone(0)
03:15:25 : 0 - NotConnected.
03:15:25 : 1 - Normal connect success
03:15:25 : 2 - Emergency connect success
03:15:25 : PhoneÀÌ Notconnect »óÅÂÀ̸ç Port¸¦ ÀâÁö ¸øÇß°í Åë½Å ÇÒ¼ö¾ø´Â »óÅÂÀÓ.
03:15:25 : ¾÷±×·¹À̵å ÇÏ´Ù°¡ ½ÇÆÐÇÑ ±â·ÏÀÌ PC¿¡ ³²¾ÆÀÖÀ¸¸ç Æù°ú Åë½ÅÀ» ÇÒ¼ö ¾ø±â ¶§¹®¿¡
03:15:25 : ȯ°æºÐ¼® ´ë½Å ¸¶Áö¸·¿¡ ¾÷±×·¹À̵带 ½ÃµµÇÑ °ªÀ» °¡Áö°í ¾÷±×·¹ÀÌµå ½Ãµµ¸¦ ÇÔ.
03:15:25 : ȯ°æ ºÐ¼® ºÎºÐÀº Pass ÇÏ°í File download / Decrypt °úÁ¤À¸·Î PassÇÔ.
03:15:25 : *****CheckOS Start********
03:15:25 : Microsoft_Windows7_Professional_Service Pack 1
03:15:25 : ÀÎÁõ °Ë»ç ÆĶó¸ÞŸ - ESN_IMEI : , Model :
03:15:25 : Phone type Compare start
03:15:26 : ****************CheckAndDownload********************
03:15:26 : ******Extract Start C:\Users\admin\Desktop\winbos\meeeeeeee\kdz-udpate\V10F_00.kdz*****
03:15:26 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
03:15:26 : File Size = 483555383
03:15:31 : Extract kdz file Success.
03:15:33 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP880AT-00-V10f-EUR-XXX-AUG-17-2012+0.dz\n
03:15:33 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP880AT-00-V10f-EUR-XXX-AUG-17-2012+0.dz)
03:15:33 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\X3_2008_v0.0.6.9.dll\n
03:15:33 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\X3_2008_v0.0.6.9.dll)
03:15:33 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP880AT-00-V10f-EUR-XXX-AUG-17-2012+0.dz)
03:15:33 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\X3_2008_v0.0.6.9.dll)
03:15:33 : Extract End C:\Users\admin\Desktop\winbos\meeeeeeee\kdz-udpate\V10F_00.cab
03:15:33 : ------------------Model.dll Information-------------------
03:15:33 : Filename : X3_2008_v0.0.6.9.dll
03:15:33 : Version : 0.0.6.9
03:15:33 : File size : 766976
03:15:33 : File date : 2012/05/08-13:09:50
03:15:33 : PC Created date: 2012/12/28-03:15:33
03:15:33 : ----------------------------------------------------------
03:15:33 : *****Check LGCM Programs Start*****
03:15:33 : LGCM Programs Not Found - OK and ready to upgrade
03:15:33 : *****WorkModelDLL Start*****
03:15:34 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\LGP880AT-00-V10f-EUR-XXX-AUG-17-2012+0.dz)
03:15:34 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
03:15:34 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\X3_2008_v0.0.6.9.dll)
03:15:34 : _DetachDLL Call
03:15:34 : _DetachDLL Call End
03:15:34 : Call fn_StartUpgrade
---------- Post added at 04:04 AM ---------- Previous post was at 03:24 AM ----------
hi once again, the abd must be working as done a simple command of adb reboot-bootloader and it rebooted the phone, how would i go about trying the method of pushing busybox through,also is it possible to push other files through with abd for example CWM_deodex_rom_v10e_signed then using recovery menu (vol - and power) , sorry im dont have a lot of understanding of these things,guess thats a reason for me not to mess around in the first place
thankyou

fastboot is disabled on 4x, so the command 'reboot-bootloader' is no use, and we don't need it in fact.

hi yeah it was the only command i remember for adb so used it too see if it the connection worked which it did, thankyou
---------- Post added at 04:46 AM ---------- Previous post was at 04:41 AM ----------
sorry it was the adb reboot command i used and not the adb reboot bootloader

friartuckme said:
hi yeah it was the only command i remember for adb so used it too see if it the connection worked which it did, thankyou
---------- Post added at 04:46 AM ---------- Previous post was at 04:41 AM ----------
sorry it was the adb reboot command i used and not the adb reboot bootloader
Click to expand...
Click to collapse
this thread is useful.if your phone is still dead ,try the method below.
http://forum.xda-developers.com/showthread.php?t=2069723
=======================================================
OK, I get it.
maybe you need the official tools now.
http://pan.baidu.com/share/link?shareid=198411&uk=2215542299
1.install the flashtool (Setup_LGFlashTool_1.3.77.21.exe)
2.replace LGFlashTool.exe to hack it
3.click LGFlashTool
4. choose dll and kz
download kz (HK v10c) or extract your kdz
http://kuai.xunlei.com/d/QXBABOJUXDJW
5.then click the "COM"button and set your port
6.click the "arrow"button to start flash mode
7.plug your phone(S/W mode)
8.the phone will reboot about 6mins later(82%) and the tool will show your a fail message
9.exit the tool unplug the phone AFTER the phone REBOOT COMPLETELY.
btw,you can get more information here (some photos)
http://bbs.gfan.com/android-5123561-1-1.html

friartuckme said:
hi yeah it was the only command i remember for adb so used it too see if it the connection worked which it did, thankyou
---------- Post added at 04:46 AM ---------- Previous post was at 04:41 AM ----------
sorry it was the adb reboot command i used and not the adb reboot bootloader
Click to expand...
Click to collapse
so which method is woking correctly? I want be sure. I was thinking of kdz flash. Will it work?

Subhajitdas298 said:
so which method is woking correctly? I want be sure. I was thinking of kdz flash. Will it work?
Click to expand...
Click to collapse
hi ,sorry il give them a try now,only just got back home.thankyou