Related
How can I get in to download mode if Im using steam recovery? I have a brick on my hands!
eramming said:
How can I get in to download mode if Im using steam recovery? I have a brick on my hands!
Click to expand...
Click to collapse
Can you access adb? If not, get a jig.
newb here. how can i get in to adb on my laptop? i have the drivers and odin installed already im trying the button combos and all i can get is the att screen and the gt9000 screen. I can also get the steam recovery screen but it just asks if i want to install the steam kernel or not and it doesnt do anything no matter which option i choose
eramming said:
newb here. how can i get in to adb on my laptop? i have the drivers and odin installed already im trying the button combos and all i can get is the att screen and the gt9000 screen. I can also get the steam recovery screen but it just asks if i want to install the steam kernel or not and it doesnt do anything no matter which option i choose
Click to expand...
Click to collapse
Check out this link:
http://developer.android.com/guide/developing/tools/adb.html
adamholden85 said:
Check out this link:
http://developer.android.com/guide/developing/tools/adb.html
Click to expand...
Click to collapse
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
eramming said:
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
Click to expand...
Click to collapse
You shouldn't be seeing any sort of boot screen if you're trying to get into download mode.. Do this: Pull your battery out and take out your sim and sd cards. Connect the phone by the usb. Hold down both up vol+down vol (do NOT hold the power button), and while holding those buttons, put the battery back in. It should take you directly into download mode.
eramming said:
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
Click to expand...
Click to collapse
You made sure you had the three button fix working before flashing right? Steam doesn't touch the bootloader, and if you're seeing the gt-i9000 screen, your bootloader is good (and so is download mode). If Odin's picking up the phone, you should be able to get adb to reboot it to download if nothing else. And as always, the jig method.
i cant get adb to recognize the device when i type adb devices.drivers are good. my serial number wont come up so cant issue any commands to reboot it or put it into download mode. i assume its because its stuck at the boot screen. i dont think i have the 3 button fix. I was using serendipity 3.5.2 with the oc\uv kernel and wanted to flash back to my previous rom and thats where my problems started. i guess the jig is up!! LOL
eramming said:
i cant get adb to recognize the device when i type adb devices.drivers are good. my serial number wont come up so cant issue any commands to reboot it or put it into download mode. i assume its because its stuck at the boot screen. i dont think i have the 3 button fix. I was using serendipity 3.5.2 with the oc\uv kernel and wanted to flash back to my previous rom and thats where my problems started. i guess the jig is up!! LOL
Click to expand...
Click to collapse
Did you try the usb/removed battery method posted above? I know it works for me and my phone does not have the 3 buttons fix...
Slowb00st said:
Did you try the usb/removed battery method posted above? I know it works for me and my phone does not have the 3 buttons fix...
Click to expand...
Click to collapse
i tried every button combo known to man! LOL I got jiggy with it and that did the trick. Im back up and running. the good to come out of this is that i did so much research and reading i think i consider myself a novice now! Im schooled in adb now too! thanks for all the replies. thread closed
Volume down + home + power always works.
Sent from my SAMSUNG-SGH-I897 using XDA App
The button order for odin that you list above never really worked well for me personally, but I found one that did.
Battery out
Start Odin
Hold volume up+volume down, THEN plug into USB
Using it this way, you never, ever touch the power button on the phone.
Maybe I've been lucky, but I've never had it fail using it this way.
jeromekobriger said:
The button order for odin that you list above never really worked well for me personally, but I found one that did.
Battery out
Start Odin
Hold volume up+volume down, THEN plug into USB
Using it this way, you never, ever touch the power button on the phone.
Maybe I've been lucky, but I've never had it fail using it this way.
Click to expand...
Click to collapse
+1
I've had success with this, as well.
i think this same thing happened to me. Most kernels actually arent able to be used with steam recovery only meant to be used with clockworkmod. THat means in order for your phone to work properly again you have to download a mod that actually works with steam, such as serendipity. So download that, plug your external sd into your computer put it on there, then through steam select intall zip, external sd and select the serendipity zip. Hopefully that will allow you to boot up your phone, download rom manager, click flash clockworkmod recovery, and then you can download any of the roms you want since almost all of them work with clockworkmod
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
You need a jig... http://goo.gl/0p52o
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
this happened to me too, I can't remember what i did to get into that weird state.. but your definitely not totally bricked. Have you tried using a usb from power off standpoint- Pull battery, replace.. make suer usb is plugged into computer and while holding BOTH vol up and vol down, connect usb to phone STILL holding vol buttons utill Download mode appears.
Only other suggestion i can make is to pick up one of connexion2005's jigs. 8 bucks- forces your phone into DL mode from bricked/off standpoint. I use it all the time and I have never bricked!
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Coreym said:
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Click to expand...
Click to collapse
True! 10 chars
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Does not happen often but some times you do need it so dont misinform people mate
I back you up Coreym, 110% I bricked my phone more times than I can count (or my wife cares to hear about), and I've always been able to fix it.
I just run odin one click, pull battery, to kill boot loop, put battery back in, hold down volume buttons, and plug in usb, to get into download mode.
Once odin reads phone, click start, and it flashes default at&t kernel. Then go through odin3 reload your cwm and boom, back to flashing.
No JIG used.
Sent from my SGH-I897 using XDA Premium App
Being Bricked is the Bricks...
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
Hey man,
You mean update through CWM?
Anyway, not sure if you found a resolution to your issue as of yet.
If not, try this, it really couldn't hurt at this point...
Apparently you have Odin and I'm guessing you're on a PC (Windows)
I'll assume you already have a stock factory ROM and PIT file (For Your Device) - if not you need to acquire these first.
Ensure you have the correct version of Odin. Some are recommending v1.7 or v1.52 - I personally use Odin v1.82
"Pluck" or Pull the battery from the device, remove the SIM and any external storage card (if any). *I just felt like using the work "Pluck" out of the context of harp playing...
Ensure the latest Samsung Drivers are installed on the PC (assuming you're on a Windows X86 or X64) and bounce the PC (reboot) Driver cache sometimes sticks...
Plug in your USB cable to the back panel of the PC (USB v2.0 or 2.2 is preferred but USB v1.0 will work) - Plugging into a front panel (for some odd reason often finds a way to disrupt order amongst the driver pool and creates havoc within Mass Storage in the DM. (Device Manager)
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Once the com port is seen, select the correct PIT file from the PIT menu in Odin and automatically the format partition check-box will populate. (I say to re PIT the device with correct PIT (should be a 512 PIT) because it sounds as though there may be some damage to the boot loader and the respective system partition. The PIT file is supposed the restore these partitions back to factory defaults provided you select the correct PIT file.
*Note - I wouldn't recommend using the PIT file for "every" ROM flash they you do, but at times it is necessary when flashing certain ROMs.
Now select the PDA (ROM you wish to flash) from the browse menu in Odin.
Make sure the check box is selected for reboot after flash.
Let the process take place - complete the flash and wait patiently for the new image or ROM to calibrate and load. (It may take a while)
Once loaded unplug the USB cable, replace the SIM and Ext Memory card then the battery and fix whatever settings you need to (ie: ATN, efs, WiFi, WAP, etc...)
Give it a go and see what becomes of it...
HtH
Peace-
AdamOutler said:
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
viny2cool said:
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
Click to expand...
Click to collapse
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
venomio said:
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
Click to expand...
Click to collapse
yeah totally.. those jigs are sweet anyway. I use it just for getting into DL mode, it's just easier and by far the quickest!
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
I had 1007 phone and flashing was so fun, untill i made a mistake of using odin when my battery was low and hard bricked it....then got a refurb phone of 1008 build (current one)...did ODIn to flash and lost 3 button combo...and now i used AIO...stuck on bricked screen...tried almost everything in the forums...while i wait for my jig
No worky...
Liv33viL said:
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Click to expand...
Click to collapse
That's my problem. I can't use the three button solution to get into DL mode. I have a 1006 model.
I'm actually using Ubuntu and Windows. adb nor Odin see the device at all...it just won't drop into DL mode.
Guess I'm going to Fry's and buying a micro USB connector with all wires and making a jig.
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
please do not misinform people that jig is a money making tool. try this: flash a three-button disabled rom first and then unplug your usb cable while flashing ... i believe you will need a jig for sure.
you can buy one here, i believe it is cheaper & more reliable than you build one with components from Frys.
http://cgi.ebay.com/ws/eBayISAPI.dl...95025&ssPageName=STRK:MESELX:IT#ht_623wt_1139
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
person1 said:
hey my phone is black and won't turn on
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 2****
Click to expand...
Click to collapse
or
person1 said:
Hey, I have not updated for like 2 years and I see a pc--!--phone
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 1****
Click to expand...
Click to collapse
AdamOutler said:
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
or
Click to expand...
Click to collapse
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
viny2cool said:
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
Click to expand...
Click to collapse
I with you man.. they can get you out of a jam right quick. I wonder if he's tried mengbo's way to brick and gotten unbricked without a USB JIG. Because itd be interesting to know..
Sent from my SGH-I897 using XDA Premium App
I recently got a Captivate for my sister and decided to root it using AIO program from the development section. After rooting the phone and installing CWM I tried to flash Apex 9 ROM. Since I'm used to my Inspire ROMs that will automatically wipe the phone before flashing I flashed it on top of the Stock ROM which resulted on the screen becoming glitchy. Removed the battery and tried to reboot the phone but it just keeps on bootlooping. Tried to start CWM but the phone won't do it. Tried getting into download mode by holding the volume up + down button and plug in the usb cable but it freezes. I'm desperate. Has anyone else experienced something like that before?
guido3300 said:
I recently got a Captivate for my sister and decided to root it using AIO program from the development section. After rooting the phone and installing CWM I tried to flash Apex 9 ROM. Since I'm used to my Inspire ROMs that will automatically wipe the phone before flashing I flashed it on top of the Stock ROM which resulted on the screen becoming glitchy. Removed the battery and tried to reboot the phone but it just keeps on bootlooping. Tried to start CWM but the phone won't do it. Tried getting into download mode by holding the volume up + down button and plug in the usb cable but it freezes. I'm desperate. Has anyone else experienced something like that before?
Click to expand...
Click to collapse
How can I get in straight into CWM? If I could get there I could just wipe the data and flash a different ROM and I know i'd be good. But right now I don't know what else to do
Before you do anything else, stop and read the op for the rom you're trying to flash. Apex 9.x needs GB bootloaders first. Try holding vol down while inserting the usb cord.
If this works, use odin1click and flash back to stock eclair.
Unfortunately, you learned the hard way that flashing a Captivate is different from flashing an Inspire.
Please, for the sake of all of the devs, mods, and more experienced flashers, please read the posts.
And get yourself a jig.
Sent from my GT-I9000 using XDA App
bornjamerican said:
Before you do anything else, stop and read the op for the rom you're trying to flash. Apex 9.x needs GB bootloaders first. Try holding vol down while inserting the usb cord.
If this works, use odin1click and flash back to stock eclair.
Unfortunately, you learned the hard way that flashing a Captivate is different from flashing an Inspire.
Please, for the sake of all of the devs, mods, and more experienced flashers, please read the posts.
And get yourself a jig.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yeah, sucks for me. I tried holding down the volume buttons. It just won't work. All I see is a a round sun, like when a flash website is loading, but nothing else happens. I'm reading about the jig but I already own a cheap micro usb cable, I don't have a solder. Why does it have to be so complicated? In the Inspire when something goes bad you just boot into CWM and do a nandroid restore but in this I can't even access CWM. Just tell me one thing. Is it fixable?
guido3300 said:
Yeah, sucks for me. I tried holding down the volume buttons. It just won't work. All I see is a a round sun, like when a flash website is loading, but nothing else happens. I'm reading about the jig but I already own a cheap micro usb cable, I don't have a solder. Why does it have to be so complicated? In the Inspire when something goes bad you just boot into CWM and do a nandroid restore but in this I can't even access CWM. Just tell me one thing. Is it fixable?
Click to expand...
Click to collapse
It is fixable, it just may take some legwork and a little money.
Have you tried taking out the battery, holding V+/V-, inserting USB cable, and then putting battery back in (that's the alternate froyo/eclair combo)?
If you hold Vol- and power (no USB insertion), you might get download mode (that's the GB combo).
jmtheiss said:
It is fixable, it just may take some legwork and a little money.
Have you tried taking out the battery, holding V+/V-, inserting USB cable, and then putting battery back in (that's the alternate froyo/eclair combo)?
If you hold Vol- and power (no USB insertion), you might get download mode (that's the GB combo).
Click to expand...
Click to collapse
Not working. If I plug the usb I get the damn sun. If I press the power button it will just start booting ove and over again. I think I just screwed up. I just can't understand how flashin a rom can mess up the download mode. Doesn't make any sense.
On I9000 gb bootloaders, volume down + power is download mode
Sent from my Cappy at 1.6 GHz, V6 supercharger, KAK tweaks, and 3G booster using the XDA Premium App!
guido3300 said:
Not working. If I plug the usb I get the damn sun. If I press the power button it will just start booting ove and over again. I think I just screwed up. I just can't understand how flashin a rom can mess up the download mode. Doesn't make any sense.
Click to expand...
Click to collapse
My initial guess is that you may have gotten a phone with the 3-button issue. Before you flashed, were you able to confirm that download mode and CWM were reachable with button combos?
Just to make sure we've covered all the steps, what button combination did you try to use to get to CWM? The only thing I can think that's happening right now is that the kernel you're using is for Gingerbread, and because that's not lining up right, it won't let you get to CWM. That doesn't explain the download mode issue, though, which leads me to believe it may be the 3-button phone issue.
Something you might be able to try is to grab the Android SDK and use the adb tool to force your phone into download mode. It might take a few tries, but it's possible.
The other option is to buy/make a jig. That's pretty much 100% guaranteed to get you to download mode.
jmtheiss said:
My initial guess is that you may have gotten a phone with the 3-button issue. Before you flashed, were you able to confirm that download mode and CWM were reachable with button combos?
Just to make sure we've covered all the steps, what button combination did you try to use to get to CWM? The only thing I can think that's happening right now is that the kernel you're using is for Gingerbread, and because that's not lining up right, it won't let you get to CWM. That doesn't explain the download mode issue, though, which leads me to believe it may be the 3-button phone issue.
Something you might be able to try is to grab the Android SDK and use the adb tool to force your phone into download mode. It might take a few tries, but it's possible.
The other option is to buy/make a jig. That's pretty much 100% guaranteed to get you to download mode.
Click to expand...
Click to collapse
Gosh! 3 buttons issue! What other issues could this phone have? I have the worst luck ever!
I tried all of the buttons combinations: holding volume up and down and pressing power button, volume up only and power button, volume down only and power button. Volume up and down + pluging usb. And same with one button only. I think I might get a jig and go **** myself because this phone got on my nerves. But before, how can I use adb to force the phone into download mode if there is no phone-pc conection at all? The won't even turn on. Would it work if I use it while the sun appears?
guido3300 said:
Gosh! 3 buttons issue! What other issues could this phone have? I have the worst luck ever!
I tried all of the buttons combinations: holding volume up and down and pressing power button, volume up only and power button, volume down only and power button. Volume up and down + pluging usb. And same with one button only. I think I might get a jig and go jig myself because this phone got on my nerves. But before, how can I use adb to force the phone into download mode if there is no phone-pc conection at all? The won't even turn on. Would it work if I use it while the sun appears?
Click to expand...
Click to collapse
I know this is exceptionally frustrating - I've been there myself. All I can say is to be persistent, and you'll get it back to good working order.
When you plug the phone into your computer's usb port, as long as the phone shows some sort of response (even if it's just the charge screen), it's likely to have a connection for data use as well. If you can get your phone bootlooping while you have ADB open, you might be able to issue the "adb reboot download" command in that brief window and get to where you're going without a jig.
One other item to try - One Click Unbrick. With this one, you'd start the phone up bootlooping and run it (I think). With any luck, it might get you somewhere you can get to download mode (or have a wider window with ADB).
And it probably won't work while the sun's showing, as it hasn't really booted up yet, although there's definitely no harm in trying.
i was reading over this and i got my phone into download mode but odin doesnt work
Seikei925 said:
i was reading over this and i got my phone into download mode but odin doesnt work
Click to expand...
Click to collapse
Are you getting your phone to download mode first, then opening Odin on your computer, and then connecting it?
jmtheiss said:
Are you getting your phone to download mode first, then opening Odin on your computer, and then connecting it?
Click to expand...
Click to collapse
Yes i have done that
Seikei925 said:
Yes i have done that
Click to expand...
Click to collapse
Have you tried changing the USB port you're plugging into? It would be best to use one that's directly connected to the motherboard (not on the front of the PC).
Also, are you using a PC, Mac, or Linux machine?
jmtheiss said:
Have you tried changing the USB port you're plugging into? It would be best to use one that's directly connected to the motherboard (not on the front of the PC).
Also, are you using a PC, Mac, or Linux machine?
Click to expand...
Click to collapse
Im using a PC Windows 7, also i cannot boot into CWM, but phone can boot up fine just not recognized by the computer.
Seikei925 said:
Im using a PC Windows 7, also i cannot boot into CWM, but phone can boot up fine just not recognized by the computer.
Click to expand...
Click to collapse
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.
jmtheiss said:
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.
Click to expand...
Click to collapse
Try installing drivers from the AIO toolbox, it worked great for me
Sent from my Cappy at 1.6 GHz, V6 supercharger, KAK tweaks, and 3G booster using the XDA Premium App!
jmtheiss said:
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.
Click to expand...
Click to collapse
Tried re installing drivers several times and have used 4 different USB cables.
Seikei925 said:
Tried re installing drivers several times and have used 4 different USB cables.
Click to expand...
Click to collapse
What Rom/Kernel are you on?
My phone is in the same condition at this moment, and also has the 3 keys combination locked, im w8ing for get a profesional jig because i made one and didnt work. But if the pc recognize the phone u can try with the One click unbrick as jmtheiss said.
I put my build number 1106 captivate into total brick mode trying to go to ICS with odin3 one click.. that was a mistake and it put that into a boot loop. I used a jig and got it into download mode, and used Heimdall oneclick because people all over this site fixed theirs with that method. I didnt know this build number made a difference and now i have the phone-!-computer screen. I can't get it to go into download mode even with three different jigs. I have no idea what to do, and any answers would be appreciated.
Not sure if you tried this already or not but I had something similar happen to me before: A method to get it into download mode is to (while the phone is off) hold only the volume up and down buttons, then, while holding the two buttons down, connect the micro usb cable.
This should bring the phone straight into download mode.
bluDog said:
Not sure if you tried this already or not but I had something similar happen to me before: A method to get it into download mode is to (while the phone is off) hold only the volume up and down buttons, then, while holding the two buttons down, connect the micro usb cable.
This should bring the phone straight into download mode.
Click to expand...
Click to collapse
Is this with battery in or out?
You can try either way. I have done it with the battery in. However I don't remember if I did it with or without the battery when I did it when my phone was bricked.
Try it out without the battery first.
Isnt that like doing it the regular way? It goes straight to that screen still..
[email protected] said:
Isnt that like doing it the regular way? It goes straight to that screen still..
Click to expand...
Click to collapse
That screen IS download mode
Sent from my ICS Samsung Captivate
Having same issue
I've followed all of the suggested solutions and still have the phone + ! + computer screen. Cannot get anything else. Any other ideas?
thanks in advance
korockinout13 said:
That screen IS download mode
Sent from my ICS Samsung Captivate
Click to expand...
Click to collapse
He is right.
From the land of defrag
matwheeler said:
I've followed all of the suggested solutions and still have the phone + ! + computer screen. Cannot get anything else. Any other ideas?
thanks in advance
Click to expand...
Click to collapse
Jig --- make or buy one.
Check my sig link below for directions on where to look for both.
I've had a similar situation, the download mode screen didn't show but some screen did. I pulled my battery, then I used an odin one-click and held the up and down volume keys and plugged in the usb cable, then my battery. The com lit up on odin, and I went ahead and flashed anyway and it worked.
I remember Adam outin saying that you can flash with phone plus computer screen. It has to do with download mode alternate image. Just flash as if in regular download mode even if Odin doesn't see it
Sent from my SGH-I897 using xda premium
I agree with the previous replies. I don't think your phone is "totally bricked", as you say. I'd suggest trying to flash back to original settings with Odin, after getting into download mode by removing the battery, holding down both volume buttons, and plugging in the USB cable. That method has worked for me several times in the past, and I hope it will work for you. Good luck!
Also, when you get back to original settings, depending on your software version, you may want to update incrementally using Samsung Kies to the software version right before the one you want to flash to, because some devices (perhaps most) will not let you update the firmware from 2.1 (Eclair) right to Gingerbread, for example, without first updating to 2.2 (Froyo).
Again, best of luck. Hope you are able to get it unbricked.
Guys I am sorry to disturb you all !!!
First of all it is an AT&T unlocked Galaxy S Captivate phone in India.
It had UCKK4 ROM.
So I tried to flash CornKernel_UCKK4_v70A.tar via odin 1.85 rightly placed the file in PDA.
The ODIN failed and gives the error, "Firmware upgrade encountered an issue. Please select recovery mode in Kies and Try again" :crying:
I will be highly thankful to helps. :good::good:
Before flashing the kernel, I'm assuming you had put the phone into download mode, correct?
If not, make sure you shut the phone down, then hold Vol- and Vol+ and insert the USB cable. Once it's in download mode, try flashing again.
If that doesn't work, take a look at the "Captivate Connection Issues and Download Mode Help" thread in my signature for some more ideas.
jmtheiss said:
Before flashing the kernel, I'm assuming you had put the phone into download mode, correct?
If not, make sure you shut the phone down, then hold Vol- and Vol+ and insert the USB cable. Once it's in download mode, try flashing again.
If that doesn't work, take a look at the "Captivate Connection Issues and Download Mode Help" thread in my signature for some more ideas.
Click to expand...
Click to collapse
Thanks for your reply.
I had been in recovery mode. With drivers installed.
I have tried Vol+/Vol- method about 10 times but always have the same screen.
NO DOWNLOAD mode.
Even tried the jig I used for SGS but now with jig also the download mode is not coming.
Btw I am very very thankful for your reply.
That's odd. A jig that's putting 301 kOhm between pins 4 and 5 should kick you into download mode no matter what.
What exactly happens when you hold V+/V- and insert the USB cable? And are you doing it with the phone completely off?
Also, if you are able to get into recovery, is it stock recovery (with 4 options to choose from) or ClockworkMod Recovery (with about 7-9 options to choose from)?
If it's Clockworkmod recovery (CWM), mtcarey released a CWM-flashable version of his kernel that you could try.
Just to be sure...
Battery Out
USB Plugged in
Hold vol+ and vol-
Insert battery
Should take you into download mode
jmtheiss said:
That's odd. A jig that's putting 301 kOhm between pins 4 and 5 should kick you into download mode no matter what.
What exactly happens when you hold V+/V- and insert the USB cable? And are you doing it with the phone completely off?
Also, if you are able to get into recovery, is it stock recovery (with 4 options to choose from) or ClockworkMod Recovery (with about 7-9 options to choose from)?
If it's Clockworkmod recovery (CWM), mtcarey released a CWM-flashable version of his kernel that you could try.
Click to expand...
Click to collapse
No matter what I do only one screen pops up. File attached in next reply.
I am using jig when the phone is off but battery in place. Some how I get the same screen.
To get recovery mode? All the buttons (V+/- and Power) pressed simultaneously. Right?
To be frank its my friends phone. I got SGS. :silly:
Attached in next reply.
Sorry attached here
You can use that screen as a download mode screen. Open odin first, then plug phone in while it is already at that screen.
Red_81 said:
Just to be sure...
Battery Out
USB Plugged in
Hold vol+ and vol-
Insert battery
Should take you into download mode
Click to expand...
Click to collapse
OKaaay
Red_81 said:
You can use that screen as a download mode screen. Open odin first, then plug phone in while it is already at that screen.
Click to expand...
Click to collapse
You're awesome.
By the way what should I flash to be super safe this time???
shrirangvedanti said:
Tried this bro right now. Not working.
Click to expand...
Click to collapse
You are giving him wrong instructions.
Try this. Hold volume down while plugging usb cable in and keep holding volume down while doing this. If that doesn't work then try
Hold volume down while holding down power at the same time. Try that and see if they works.
Sent from my GT-N7000 using xda premium
You may want to check that your computer is recognizing the phone. If not, you need to reinstall the drivers.
http://www.samsung.com/us/support/owners/product/SGH-I897ZKAATT
---------- Post added at 11:24 AM ---------- Previous post was at 11:23 AM ----------
hyelton said:
You are giving him wrong instructions.
Try this. Hold volume down while plugging usb cable in and keep holding volume down while doing this. If that doesn't work then try
Hold volume down while holding down power at the same time. Try that and see if they works.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No wrong instructions. Look at the screenshot. He's in soft-brick.
hyelton said:
You are giving him wrong instructions.
Try this. Hold volume down while plugging usb cable in and keep holding volume down while doing this. If that doesn't work then try
Hold volume down while holding down power at the same time. Try that and see if they works.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
The instructions aren't necessarily wrong, it's dependent on whether you have the I9000 or I897 bootloaders. The steps you've described are specific to the I9000 bootloaders - the steps mentioned above are for the I897.
Red_81 said:
You may want to check that your computer is recognizing the phone. If not, you need to reinstall the drivers.
http://www.samsung.com/us/support/owners/product/SGH-I897ZKAATT
---------- Post added at 11:24 AM ---------- Previous post was at 11:23 AM ----------
No wrong instructions. Look at the screenshot. He's in soft-brick.
Click to expand...
Click to collapse
ODIN identifies the phone. What do you recommend me to flash? I wanna upgrade to ICS.
What do you suggest to flash now?? I wanna be safe.
Thank you sirs
shrirangvedanti said:
ODIN identifies the phone. What do you recommend me to flash? I wanna upgrade to ICS.
What do you suggest to flash now?? I wanna be safe.
Thank you sirs
Click to expand...
Click to collapse
If you're wanting to try ICS, take a look in the development section. There are several roms to try out - just look around and see if any of them look appealing to you.
Just as a word of caution, look for the "Encryption Unsuccessful" thread and read about that error message in there. ICS roms have a small chance of causing a serious issue for your phone, and it would be good to make sure you know the risks before flashing.
Other than that, just know that you'll probably have to flash your first ICS rom twice - once to set up the framework, and the second time to fully install the rom.
shrirangvedanti said:
ODIN identifies the phone. What do you recommend me to flash? I wanna upgrade to ICS.
What do you suggest to flash now?? I wanna be safe.
Thank you sirs
Click to expand...
Click to collapse
You'll want to flash Corn again to get working CWM.
jmtheiss said:
The instructions aren't necessarily wrong, it's dependent on whether you have the I9000 or I897 bootloaders. The steps you've described are specific to the I9000 bootloaders - the steps mentioned above are for the I897.
Click to expand...
Click to collapse
Well ive been using that download method since 2010 on samsung's. Even on cdma ones vol down plus power or usb always got it into downloader mode.
Sent from my GT-N7000 using xda premium
Red_81 said:
You'll want to flash Corn again to get working CWM.
Click to expand...
Click to collapse
But the same thing brought me to this situation and not working.
Can I use ODIN v1.7 instead of 1.83?
Which version shall I flash? I flashed v70A and got into trouble.
shrirangvedanti said:
But the same thing brought me to this situation and not working.
Can I use ODIN v1.7 instead of 1.83?
Which version shall I flash? I flashed v70A and got into trouble.
Click to expand...
Click to collapse
Try using 1.85. I believe that is the newest version. Make sure you're using a good cable. One of my captivates would always take 2 tries to flash kernels. Not sure why.
You could also use the one-click found in the EXE folder of the utility in my signature
Red_81 said:
Try using 1.85. I believe that is the newest version. Make sure you're using a good cable. One of my captivates would always take 2 tries to flash kernels. Not sure why.
You could also use the one-click found in the EXE folder of the utility in my signature
Click to expand...
Click to collapse
All your utilities work like .. Super duper. :good::good: