Related
Hey Dudes,
I have a really big problem, i bought for my father a navigation system. clarion Map360, but I was so stupid and tried to but a other windows mobile on it. Now I have the problem that I have a blue screen and the navi asked me if I want to upgrade the windows mobile by USB or SD-Card. But I didn`t have the right Image i think.
I need the Winceimg.cks or the whole Image. I hope somebody can help me.
Sorry for my English..
Greetz Slimer
What situation are you in right now?
Did you try to reboot it?
Did you back up the old image before attempting this?
Generally this thing are protected from writing images not belonging to them so unless you selected to format the flash first you may still be ok.
If not, I doubt your unit can be salvaged without a lab since ROM images for PNDs are almost impossible to come by, specially for less popular brands.
My Situation, i think i killed the flash rom, if i start the system normally nothing works, no screen nothing, but when i started with the start and the reboot button i come to the menu with a blue screen.
1. wince upgrade
2. uboot upgrade
3. exit
Greetz Slimer
P.S.: I didn`t backup the Image, but i have the same system Clarion Map360 at home to, thats working. Maybe you can give me tutorial, how to backup the image from the other one, to repair the old one.
Other Question, Is it possible to put a Windows Mobile 5 System on it, to run another GPS Software like TomTom 6
Well sounds like you are in trouble.
You need to look around the menu options. Sometimes with thees devices there is an option to dump the current ROM to SD.
If it exists use it if not you probably need a lab.
You can not put WM 5 or any other Windows Mobile on this device unless:
1) You can get the original ROM
2) Extract all drivers from that ROM
3) Incorporate drivers in Windows Mobile image
4) Package Windows Mobile image to suite your device memory configuration
I other words: mission impossible.
You can try to use the cab at this link to run WM software.
hmm damn.. there is no point for dump rom to sd card... but if its possible to get this rom somewhere in the Internet. maybe somebody have it here in this forum.. because i found a thread but the link to the image is down...
Greetz Slimer
I have just got a 8925 but i want to add some roms to it: ultimate launch, pocket cm, ifonz, & iphone interface. I am not sure of the best way to do this. Should they be added all at the same time, or do i have to add them one by one? Also i am not sure how to unlock the phone so that I can add these apps to the device. I have searched the forums and I haven't found a tutorial for this.
Any ideas?
If you want to be really sure you won't get any problems, soft reset after every installation. This IS overkill, since apps that need a soft reset will ask for one, but it won't hurt you.
Install Kaisertweak first:
http://www.jongma.org/KaiserTweak/KaiserTweak.zip
Extract the zip to your phone and run the extracted .exe from your phone. One of the options found under "Security": "Not-certified Warning". Disable the warning and exit the program (hope you meant this by 'unlocking'). The nag you used to get will be gone.
Good luck!
I think you may mean you want to add some applications and not ROMs? You don't need to unlock your phoine to install applications on them. If you want to flash a different ROM, then you will have to use HardSPL and flash the ROM
Here's pocket CM:
http://www.pocketcm.com/contact.php
Ultimate Launcher:
http://www.ultimatelaunch.de/
As for the Iphone interface, there are plenty of icons floating around, and on the the 'post your today screen' thread on the Kaiser general section, there are massess of info from users on how to achieve an Iphone look to their Kaiser and has links to Iphone Icons
HTC Home customiser is the simplest programme I know where you can input iphone icons and themes to your phone
http://www.pocketemu.com/download4.html
Do i need to hardspl my device to add rom's or can i just softspl?
I suspect you haven't quite understood some basics.
ROM = like Windows. There are 'shipped' ROMs (factory/default/shipped ROMs) and custom ROMs (Dutty/Alex/.../homemade ROMs). You always have 1 ROM 'installed' on your device; otherwise your device wouldn't function (just like a PC without Windows)
CAB = applications. Ultimate Launch, PocketCM, iFonz, & iPhone interface are apps. On PC you need to execute an .exe file (mostly setup.exe) to install an applications. PocketPC's don't work with .exe installers, they work with .cab installers.
Given your posts, I think you only want to install some applications. That means installing .cab files. No need for any ****SPL here.
If you really are already thinking of replacing your shipped ROM, than you WILL NEED HardSPL. But given your explanation I don't think you were planning on doing that.
Hope this clears some things up.
Good luck and welcome...
Can you have more than one rom on a device and just switch back and forth whenever you want to use one or the other?
student174 said:
Can you have more than one rom on a device and just switch back and forth whenever you want to use one or the other?
Click to expand...
Click to collapse
Nope and why do you want to switch ROMs?
Dr. Strangelove said:
I suspect you haven't quite understood some basics.
ROM = like Windows. There are 'shipped' ROMs (factory/default/shipped ROMs) and custom ROMs (Dutty/Alex/.../homemade ROMs). You always have 1 ROM 'installed' on your device; otherwise your device wouldn't function (just like a PC without Windows)
CAB = applications. Ultimate Launch, PocketCM, iFonz, & iPhone interface are apps. On PC you need to execute an .exe file (mostly setup.exe) to install an applications. PocketPC's don't work with .exe installers, they work with .cab installers.
Given your posts, I think you only want to install some applications. That means installing .cab files. No need for any ****SPL here.
If you really are already thinking of replacing your shipped ROM, than you WILL NEED HardSPL. But given your explanation I don't think you were planning on doing that.
Hope this clears some things up.
Good luck and welcome...
Click to expand...
Click to collapse
Thats a good straight to the point summary
Guys, i need some help. Recently i came across the rom update for my xda iis, so i decide to take it out of my drawer and see if i can update it with HELMI_BA_WM6_R0_Public. I followed all the steps and try to upgrade it, after i click on HELMI_BA_WM6_R0_.exe, my xda iis restart on cradle and after that nothing happen. I notice it only appear on the top with the word "serial" and the bottom "v2.06". I have tried in vain to get it working again, please try to help as im very new to this. Im using window Vista.
since apparently, you are not that experienced in flashing your device, i would recommend you use windows xp to flash your device.
then you have a look at this wiki wizard:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
this is a step by step instruction on how to upgrade from wm2003 to wm6.
please follow it precisely, even if you don't see a point in certain steps, they are all important!!!
if you, however, don't understand a step or a phrase, feel free to re-post, and i will explain it to you in more detail.
have fun with the upgrading, one word of advise: take your time, the first upgrade with storage resize radio upgrade, sim unlock and other stuff can last an hour or two (not the upgrade itself, but the process you go through). when you remember the steps and feel like you want a different rom, after testing this one, all you have to do is donload a "nk.nbf" file and flash it, and the entire update takes you 5 minutes then
Hi Chef_tony, thanks for the reply. I went to the link u gave me and from the 1st step on im stuck. It ask me to download both the unlocker and Repart and place it on the phone, but i cant do anything with the phone except for the "Serial" on top and "V2.06" below, it does change to "usb" when i cradle it. please help. thanks again
ok, then at that point you are stuck in boot loader, that happened to me too.
the reason for that might not be that interesting to you now, but it is because vista in the middle of the flashing process vista thinks it needs new drivers, downloads them and then it disconnects the device, something that shouldn't be done while flashing, as everyone knows.
these wiki links explain how to flash from vista using modified drivers, but i wanna tell you in advance, that i personally never got it running, i always use a windows xp machine:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
so, still i want to state that the best way to flash is a xp computer, if you have access to one, use that to flash your original shipped rom first, to resize the storage (first wizard step) afterwards.
theoretically, a virtual machine, running xp would also work, if you still have an xp cd lying around, you can download virtual pc 2007 from microsoft, it is free and you just need a short time to set up a virtual xp machine, because i can guarantee you, you will flash more than one rom, once you started on the topic.
remember, you need to flash your shiped rom, then you want to flash the helmi rom, then maybe a rom update and probably you are not staying with that rom forever, since it is wm6, there is also wm6.1 and wm6.5 to follow that.
what i want to say is:
- try the flashing with vista option described in the wiki links above
- if that doesn't work, try to get to an xp computer and follow the steps
- flash your original shipped rom first
- then the wiki wizard steps in again
Problem is solve, thank you so much chef_tony. my next question is...where can i get wm6.1 rom as all the link i had is dead
according to another user, this thread's links are still working:
http://forum.xda-developers.com/showthread.php?t=403421
but it does not contain office. (you can still try other office download links, if you need it)
just by the tiny size of the extrom i would say there is hardly anything contained, but anyway, that is a rom i used too, and it is quite nice, also look up IOLITE stuff in this forum for extra apps.
make sure to repost if everything went to plan
I found a working wm6.1 pro on another website and its working great! It contain office as well. Thing now is i didnt adjust the memory and i didnt have enough space to install every software that i had
This is the link http://www.4shared.com/file/66810499/8a61be24/HTC-BA5220758WWE_v302_25M_PP-16M_RAMdisk_a.html?s=1
By the way chef_tony, you happen to have any idea how to open up BA, cause i would love to clean it up on the inside.
1. the thing is, the storage resize is important for 2 reasons:
- sure, with the resize you woulld have 16mb more storage memory for installing programs and storing stuff
- you still have your original extrom on the device, which is not compatible with newer roms, meaning, instead of simply copying the extrom to an sd card to have a basic setup and installing programs you need to install cabs manually
which is why i said to follow the steps precisely, now you have 16mb of space you simply can't access from wm6 at all, and for a resize you'd have to go back to wm2003 first but give your rom a try first, maybe it is not the perfect one for you after all, then you still have the opportunity to re-flash.
2. i am glad you found a valid link, many people post their roms to hosters that take it down after a while, expecially when there are no more downloads of that item, and so, many links posted here half a year ago are not working anymore, which is sad, since there are still a lot of people, including you, that would like to go to wm5, wm6 or wm6.1 and not just the newest wm6.5 builds, but, whatever, you found your rom and hopefully kept the files stored on your pc for future reflashing...
3. there are two basic disassembling guides for the BA:
- the official service manual (also good for repairs, since they explain each step):
http://www.4pda-service.ru/netcat_f.../BLUE ANGEL/HTC_Blue_Angel_Service_manual.pdf
- the manual made by a forum user:
http://www.land-of-kain.de/ppc/mda3/disassembly/
i am glad it all worked out for you so far and you will realize that this old device has a lot of potential, when you keep it up to date (and clean ).
Thanks you so much for the help. I'll try to update if the link is dead someday, by the way..i have 43mb storage and 84mb programme, is that good or bad?
the program memory is normal, but the storage should be 16 mb more, so instead of 43.XX you would have 60.30mb.
that is the extrom resize mentioned before.
- you need to flash your original rom for that
- then copy the "xda-developers unlocker" and the "repart_doc.exe" to your device. (attached below)
- you install the extrom unlocker
- then you go to start menu and extrom unlocker
- you execute "unhide"
- then unlock
- then start the repart_doc and set the size to 128kb
then you can lock the extrom and hide it again.
maybe in that process there is a soft reset required, i don't remember.
the reason why you do all that is because the extrom memory is hidden and locked and contains a bunch of cabs, that install automatically, when you hard reset the device.
so after that, you can reflash your wm6 rom, and you'll see, that after you resized and formatted that space, your memory dialogue will show 60.30mb of storage memory (plus it gives you the opportunity to install wm6 extroms from the sd card).
LS
Being a high-end user of telephones, I would like to upgrade my X1 to WM 6.5. But I am not a programmer, do not understand many of the 'slang' being used and... work on a Aplle Macintosh. So, without experience of "flashing" and "ROMing" and with absence of a Windows computer, I wonder what the best and easiest way is for me to update to WM 6.5
- I can make a backup of the phone
- I can acces the Micro-card
- I would like a very (!) clear discription of what-to-do with plug-and-play links and so
- I also am willing to pay someone (in NH Netherlands) to update the phone.
Hope to hear from one,
greetings Frank
it needs no programming skills
please see here for nice video tutorials on how to flash a rom
its dead simple
http://forum.xda-developers.com/showthread.php?t=497511
you WILL need a windows computer to Hard-SPL
however flashing roms and radio after that can be done through the memory card!
for the process of flashing view the video tutorials posted above.
You have to do a backup of all your saves, stats, documents etc. on the internal phone Memory. Registry Entries have to be saved, too. For saving contacts use PIM Backup. thats the most common.
Its like getting a new pc but you can keep your hard drive.
There are programms like Sahimi that do automatic backups of all your files, registry entries, etc. but you have to write a config file and know where everything is saved. thats more for "advanced" users.
fpd5 said:
LS
Being a high-end user of telephones, I would like to upgrade my X1 to WM 6.5. But I am not a programmer, do not understand many of the 'slang' being used and... work on a Aplle Macintosh.
Click to expand...
Click to collapse
Hmmm... why being a "high-end user" make you want to flash (i.e. modify your Operating System) a 6.5 ROM? From the business-man point of view, I do not see any advanced feature, nor I see if you are a heavy caller.
Moreover, flashing a 6.5 ROM will void your warranty. Please remember that 6.5 is not official for X1, and you can have some bugs (99% of time you won't, but...).
So I really recommend you to stay with your 6.1 ROM, unless you can point out the main, great advantages of having a 6.5 ROM for a business use.
P.S.: you will need a Microsoft PC to Hard-SPL (i.e. make your phone accept non-official ROMs)
P.P.S.: flashing a ROM is REALLY easy:
1)download a 6.5 ROM
2) rename it Kovsimg.nbh
3) transfer it to your SD card
4) switch off the phone
5) press simultaneously the power button and the two volume buttons on X1 right
6) That's all!
Hello
After a couple of days of hunting a new update for my new phone, I got to a dead end.
After trying multiple ways (most of them are from here so I will post only 2-3 links): http://forum.xda-developers.com/showthread.php?t=732362 , http://forum.xda-developers.com/showpost.php?p=3695364&postcount=4 , http://forum.xda-developers.com/showthread.php?t=416211 , the problem was the same. After sync and starting installation via USB (phone freezes) and SDcard (phone freezes automatically with starting Heret.exe) I don't know and really can't find a way how to remove WM6.5 (and put android) or someway update or install a fresh version.
I hope someone will be willing and able to help me with this problem.
Thanks in advance.
Dude, what *exactly* is your issue? From what I can see, you're trying to install android and it's not working for you..
Either way, first, format your SD before trying anything. See if that will get your phone to respond. If not, get a new one. The problem with SD cards is, when they fail (or get corrupted), it can cause your phone to "almost freeze". Instantly fixed by removing the SD. And booting the phone without it usually allows the phone to work normally.
The SD is brand new (4GB), and I also tried with 5 other SD cards (2 and 4 GB's).
I don't think it's to the SD card's, its more to the damn phone and I have no clue how to reinstall WM or put Android on it. And that the issue, how to prevent completely freezing while sync via USB and boot from SD card.
Hope you understand better now neocyke
Well, honestly dude, a T5388 is not exactly a TD2, so, what would work on an actual TD2 might not for you. Based on my experiences with clones, best is to flash with no SD in. Try visiting this thread and use the ROM there. Get the IDT flasher and work your way from there. Oh, and you might wanna remove Activesync or WM Device center before flashing.. Good luck with that..
As for android, installation for XDAndroid is the simplest thing in the world. Just unzip the FRX06 zip file to a folder (andboot is usually used). Take the topaz startup and put in the root of that folder (remember to edit as needed). Then copy *the entire folder* and dump it on the root of your SD. Run Haret from WM and that's it. Just wait for it to boot.. But then, this is assuming that your phone is supported by XDAndroid of course. You might wanna check that in the android dev section..