Database Develop

[Q] Internal sd card issue

hello, I have the Samsung Captivate and am having a problem with the internal sd card. I went to put android 2.2 froyo and everything went well said success threw odin but my phone will boot up but once it gets to the galaxy s screen it stops. I have done the update threw odin several times and I run into the same problem. I got into system recovery mode and formatted everything cause it says that there was an error in the internal sd card, and needed to be formatted so I did that. Now when I go to reinstall packages it gives me this list.
--install from sdcard...
Finding update package...
opening update package...
Verifying update package...
E: failed to open /mnt/internal_sd/update.zip (no such file on directory)
E:signature verification failed
Installation aborted
any help would be much appreciated thank you.

yeah....reinstall packages doesnt do anything unless there is a file on your sdcard called UPDATE.ZIP
what you need to do is go back into DOWNLOAD mode, not recovery mode and use ODIN.....

I did that and after everything finishes and reset comes up in the blue box the phone starts it will go threw a list and it comes to a data wipe failed in red and formatting CACHE and DBDATA then applying multi-csc, installing multi-csc. Then Install default apk files, please wait
E:Can't mount /dev/block/mmcblk0p2 (invalid argument0
E: copy_data_default_apk:cannot mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
Then I format the sdcard and go threw everything again and it does the same thing. Im trying to give all the details.

I've got the same problem with GT-i9000.
Tried to flash with pit 512 and re-partition and pit 803 with re-partition, but the problem remains.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

exactly the same problem here
anyone got the solution right?

off topic but....
@thebeast
Your posts are hard to read. I keep thinking you are throwing your phone.
threw - past tense of throw "I threw it out the window"
through - by way of "I updated through odin"

Yeah I have that problem sometimes cause I'm typing relatively fast while focusing on other Things. I also do not proof read, relying on spell check too much. Considering I was trying to explain exactly what was happening to my phone from memory and going "through" the process over and over some mistakes are bound to happen. I had my lil bro hussle an att support store and get me a new one hence why I never checked this thread.
If you are having the same problem as me you do or did Not have an update.zip file on your internal SD. You deleted it or it was removed some how so before u tried to install anything you should of put it back to stock and hopefully that would of fixed it but I do not know the solution based on the fact I never bothered fixing mine.
Sent from my SAMSUNG-SGH-I897 using XDA App

lol @ the grammar police.
Stupid question - have you tried to use ODIN to go back to stock before attempting to re-flash? ODIN usually completely wipes the phone and any of the silly issues that come up.

The problem that is encountered is using oden to update while its missing that file so it deletes and starts to install the new rom but cannot. So the phone is stuck in limbo, I tried to use the one click flash countless times left it for hours and it would never work. So maybe if you did that before u tried to put the rom it might have worked but not once the damage is done. As far as I know.

thabeast said:
The problem that is encountered is using oden to update while its missing that file so it deletes and starts to install the new rom but cannot. So the phone is stuck in limbo, I tried to use the one click flash countless times left it for hours and it would never work. So maybe if you did that before u tried to put the rom it might have worked but not once the damage is done. As far as I know.
Click to expand...
Click to collapse
I had a similar issue I think like 2 days back when I goofed up something in the framework folder. Nothing seemed to work.
So I had to revert back to stock using one click. That was the only thing that worked.

Yeah one click would not work for me at all trust me I tried that forever until I got the replacement.
Sent from my SAMSUNG-SGH-I897 using XDA App

thabeast said:
Yeah one click would not work for me at all trust me I tried that forever until I got the replacement.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did u try going to clock work recovery and doing a "reset to factory settings"

I did and would not work. But I have a fully workout one now so maybe the Guy who is having the problem now should answer these questions lol
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Bricked - Samsung Logo Repeat, Can't Fix by Stock Rom

Hi all,
My i9000 cannot boot successfully, it repeats the samasung logo again and again.
And when I try to re-flash the stock rom - 20110531_ZSJV5_2.3.3_ROOT_STOCK by ODIN
After reboot, it shows following Error:
E:failed to mount /data (File exists)
E:delete_data_files:Can't mount /data
your storage not prepared yet. please use UI menu for format and reboot action.
Media files copy failed
Click to expand...
Click to collapse
Then it keeps repeating the samasung logo again and again.
Please help!!!!

Can you access the download screen (volume down + home + start) or CWM screen (volume up + home + start)?
If you can access the download screen, use Odin and download the stock Gingerbread from online (do google search), make sure you also have a PIT file like PIT 512 or something, and have the re-partition ticked, try that and see if it fixes the problem.
If you access CWM, maybe voodoo lag fix is on and didn't properly format the partitions.

Thanks
I have tried using ODIN 1.8 and I9000ZSJV6
But the problem still retain
The screen shoot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You need to get a .pit file (512) and use repartition in Odin when you are flashing the original rom.

Yeah~I have used PIT512 and selected Re-partition, but problem still remain........

Damn ... it looks bad.
I have a suggestion.
Push a speedmod kernel with odin.
Enter recovery mode.
Convert the partitions to RFS (even if they are reported as such).
Redo the flashing of the original rom.

O...situation goes really bad
After I have flashed SPEEDMOD, I enter CWM
and try to convert to RFS, it said:
Can't mount /mnt/sdcard
Backup failed!
Then quit.
And I try to mount internal SD,
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblo0)
(No such file or directory)
Error mounting SDCARD:!

It looks like you have issues with the nand memory. I'm not sure 100% about it but it sounds like this.
In case your nand flash is dead, I really don't know what can you do ... there are few topics related to this issue. Check them out and see maybe is a solution somewhere.

don't use JV6, try flashing using JVQ, and don't use rooted versions, use a pure stock, try using Odin 1.7. It if can't mount, maybe there's a corrupt internal SD.

You may want to look at the stock rom vs an odin custom rom (like darkys resurection edition) and see if everything that that the custom has (minus the mods) is in there. I would get a mounting error for db_data from my stock rom (drove me nuts) because the stock roms did not update that and there for with a re partition it was missing.
I finally found another post on the CM7 forums that mentioned it so it could be an issue for your rom too?
If you determine which file it might be you can pull it from an earlier stock rom (one of them should have it).
You might even try flashing darky's. if it works then you know its a file issue and the phone is likely fine.
G

I flashed over 10 different roms with re-partition but nothing change...........
but luckily warranty should still cover, it is now in factory.....
Thanks All~

Similar problem: Phone stuck in boot up loop
Okay so about 2 months ago rooted and put a new rom on my vibrant. Last night I decided I wanted to go back to the original stock rom by restore my phone back to its original factory settings (at the time it made sense to me). I did this by turning the phone off, holding the volume buttons and power button until a menu came up where I selected wipe to factory setting. In doing this I cleared the rom I had on my phone and am now stuck in a loop where my phone keeps trying to turn itself on but has nothing to boot up. I am able to get to the menu that enables me to wipe my phone to factory setting etc but that hasnt helped all too much. I'm unable to mount my phone now on my mac in order to put a new rom on the sd and Oden does not seem to work for macs and I do not want to put a virtual machine on my computer but will if thats the only solution. PLEASE PLEASE PLEASE HELP!

That doesn't wipe to factory settings if you had a custom rom. It just wipes the user areas so IF you had a stock rom it would be back like day 1 but with a custom rom its like day 1 of the custom rom.
Though something else happened here too.
G
Sent from my GT-I9000M using XDA Premium App

Don't use a mac use Odin and do it on windows, download the stock jvq rom again except in windows and use the 512 pit file aswell. See if that works.
Sent from my GT-I9000 using XDA App

Also forgot to mention when using Odin in windows make sure you have the windows drivers by downloading Samsung kies. From the Samsung website.
Sent from my GT-I9000 using XDA App

[GUIDE] Flash Clockworkmod recovery on Galaxy Mini/Pop

At first: Download the attachments to this post. warning: If you have Android Froyo, download CWM-Froyo.tar. If you have Gingerbread, download tass-recovery-cwm.tar
For the steps 4-9, there is a screenshot below.
After downloading, you can start using my little guide!
1. Power down your phone.
2. Enter download mode by pressing 'Volume down + Home button + power button. Wait a second. After some time the screen says download.
3. Connect through USB to your PC.
4. Launch ODIN v4.38.
5. Wait for Odin to recognize your phone. (At the left, there will be a yellow box that says COM "?", the number can be different.)
6. Select Tass_v1.0.ops by pressing the 'OPS-button'
7. Make sure 'One package' is marked at the left of the window.
8. Select tass-recovery-cwm.tar with the 'One Package-button' at the bottom of your window.
9. Press start, wait 'till your phone reboots. Now you'll have ClockWorkMod-recovery installed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Does this work for Froyo as well?
If not maybe you should add it to your guide as a warning!
Nevertheless thank you very much for the guide!

Well, as far as my experience goes, it does.
But, found a version that's specially made for froyo, so I'll add it to the post.

Please add some screenshot for newbies

freddies said:
Please add some screenshot for newbies
Click to expand...
Click to collapse
Will do...
Tnx for your tip!
EDIT: added a screenshot...

Hi have the stock 2.3.5, I flashed clockworkmod and I tried to do a backup of my rom. Clockwork on opening says:
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
and then when I try to do a backup the same errors...
if I select "mounts and storage" I can't manually mount nothing (/system, /cache, /data).
I try to format the 32GB sdcard again and I changed it with another one (2GB). Same results :-(
anyway the problem it isn't the memory card, clockworkmod can see the contents of it. the problem is that can't mount system folders...

Had the same problem last time. Try to contact the developers over at Clockwork...
You might get some help over there. I've just made this guide, I am not the developer.

walker7373 said:
Hi have the stock 2.3.5, I flashed clockworkmod and I tried to do a backup of my rom. Clockwork on opening says:
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
and then when I try to do a backup the same errors...
if I select "mounts and storage" I can't manually mount nothing (/system, /cache, /data).
I try to format the 32GB sdcard again and I changed it with another one (2GB). Same results :-(
anyway the problem it isn't the memory card, clockworkmod can see the contents of it. the problem is that can't mount system folders...
Click to expand...
Click to collapse
You can't backup stock roms using this CWM recovery since it still doesn't supports backing up of rfs partitions. The developer left it so since we believed those who will be using CWM recovery will probably be using any custom rom which is supported for backup.

Agree with yagya.... Cwm fully function on ext 2/3/4 file system only. I've tried on stock rom xxkws2, backup sucseed..but failed to restore.
Sent from my GT-S5570 using xda premium

thanks for explanation

Is cwm 4.0.0.5 right?

KoperKiller said:
Is cwm 4.0.0.5 right?
Click to expand...
Click to collapse
Yes, read through this to flash it on our Galaxy Mini/Pop gts5570. http://yagyagaire.blogspot.com/2011/09/installing-clock-work-mod-recovery-in.html
You may also follow the link on my signature for grate Galaxy Mini stuffs and guides or tutorials.

Hi...you can backup stock rom...ho says that you cant ...i backup gingerbread with cwm v5...just trying to help
Sent from my GT-S5570 using XDA App

And by the way you can restore to...i had 2 backups one with stock and one with cyanogenmod and i restore them when i want
Sent from my GT-S5570 using XDA App

plesan said:
And by the way you can restore to...i had 2 backups one with stock and one with cyanogenmod and i restore them when i want
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yes, you can backup and restore stock roms with latest CWM recovery v5.0.2.6 however, there comes an issue when you try to restore GB backup over cm7 or other custom rom. So, it seems pretty useless.
Also, CWM recovery doesn't work fully with stock roms. Just yesterday someone complained recovery shows error when flashing gingerbread-2.3.6-root.zip file for rooting GB 2.3.6, later when I suggested him to flash it on stock recovery it worked.
So, it's pretty simple and clear custom recovery is good with custom roms only.

Unable to backup stock rom, seeking help.
Hello all and thanks Bunnybugs_007 for the tutorial.
I managed to install CWM v 4.0.0.5 but still I cannot backup my stock rom.
I can boot into recovery mode from CWM (4.0.0.5) But I can't backup stock rom.
I am getting mounting errors. (The only partition I can mount is the sdcard partition).
I would also like to ask you if I can update CWM through itself during recovery mode. Is this possible, I mean, CWM flashing itself?
Or do I have to use ODIN to update CWM 4.0.0.5 to CWM 5.0.2.6.?
This file is in a zip format but it does not have any img file inside...
I own a froyo but keep getting erros in mounting.
Thanks a lot.
P.s.: I been looking around for the answer but haven't figured it out yet. Although the question about CWM updating itself might by absurd i am forced to ask it. The info that I have gathered until now is confusing. I have also tried to update CWM through ROM MANAGER. but its GUI doesn't even recognize the CWM that is already installed. And RM doesn't recognize the phone model, when I try to get an appropriate version for it. So it's of no surprise that RM can't backup stock rom either...

thanks for the guide. going to check it out...

I managed to install CWM v 4.0.0.5 but still I cannot backup my stock rom.
I can boot into recovery mode from CWM (4.0.0.5) But I can't backup stock rom.
Click to expand...
Click to collapse
It simply means .. No, you can't backup Stock ROMs.

Hi Guys!
I flashed Clockworkmod recovery in my Galaxy Mini. I have Rom Manager, but when I try to partition my sd card, it says "You must have ClockworkMod Recovery installed before continuing! Install blah blah blah!"
The ClockworkMod is working in recovery mode too, but I don't know what exactly is the problem!
Help Guys! I desperately want to increase my internal memory

^^ You installed CWM via Odin or Rom Manager? If its through Rom Manager, then I guess something would have turned wrong.
Sent from SGM

samsung galaxy S I897 restart E: failed to mount / data file(exists)

samsung galaxy S I897 restart after galaxy S logo
i try to flash this file
I897UCKH3_I897UCKH3_I897UCKH3_HOME.tar
or
I897UCJF6.tar
but same
show error
E: failed to mount / data file(exists)

Try i897ucKK4 here... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I897 using xda premium

4-2ndtwin said:
Try i897ucKK4 here... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
after flash this i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe file same condition show samsung Galaxy S then restart
reboot continues
now give error E:failed to mount invalid argument

Your internal sdcard (not the removable external sdcard) may be messed up.
Did u ever see on ur phone the "Encryption unsuccessful" warning/error ?? If so, then there are a couple of threads about a work around (not a fix) in the Development forum.
If not, then try Heindall instead of Odin, to flash Stock KK4 firmware.
Sent from my SAMSUNG-SGH-I897 using xda premium

4-2ndtwin said:
Your internal sdcard (not the removable external sdcard) may be messed up.
Did u ever see on ur phone the "Encryption unsuccessful" warning/error ?? If so, then there are a couple of threads about a work around (not a fix) in the Development forum.
If not, then try Heindall instead of Odin, to flash Stock KK4 firmware.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
SystemsCorps Cwm-based recovery v5.1.0.7
Wiping data
Eraseing /data
updating device table..
Erasing /cache..
using erase (rm-rf)...
Eraseing /dbdate..
using erase (rm-rf)..
Erasing /sdcard/ .android-secure...
using format_unknow_device...
Error mounting /sdcard/ .android-secure!
Skipping format ...
Data wipe complete.
now brother you say try to flash Heindall kk4 stock firmware
brother please clear my set working again or not b'coz i'm tried to load files allready download 1.45 gb anyway final try kk4 stock firmware otherwise use jtag
brother i request you if possible so plz repaired my fone

Now that you have cwm recovery, download and copy CyanaogenMod9 rom to your external sd card. Get into cwm recovery and install CM9 zip from your external sd card.

uhm said:
Now that you have cwm recovery, download and copy CyanaogenMod9 rom to your external sd card. Get into cwm recovery and install CM9 zip from your external sd card.
Click to expand...
Click to collapse
brother CyanaogenMod9 4r ICS 4.0.4 or support all firmware ..? can u provide me link which 1 i download and flash

http://get.cm/get/jenkins/7073/cm-9.1.0-captivatemtd.zip

uhm said:
http://get.cm/get/jenkins/7073/cm-9.1.0-captivatemtd.zip
Click to expand...
Click to collapse
1st thanks brother
brother after download this file copy my sd card
i try to update apply update from sdcard
then
yes - Install /sdcard/update.zip
E:can't mount /sdcard/update.zip
there is no option update external sd card.
Code:
E: failed to mount / data file(exists)
E:failed to mount invalid argument
Error mounting /sdcard/ .android-secure!
E:can't mount /sdcard/update.zip
how to repaire this fone condition show Galaxy S then reboot continuous
try to flash these flash files
I897UCJF6
I897UCKH3_I897ATTKH3_I897UCKH3
I897UCKE3
I897UCJI6-OCD-REV02-Low-designgears.exe
I897UCKH3_withBL.exe
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I897UCKK4 Stock, Wipe, with options to install Bootloaders, Param,and Re-partition-One-Click
CornKernel_UCKK4_v706
dbdata.rfs
speedmod-kernel-i897-k13e-500hz_2

One more thing. Why did you flash speedmod-kernel-i897-k13e-500hz_2? Flash CornKernel_UCKK4_v706 via odin first and then get into recovery mode.
In cwm recovery menu, don't select apply update from sdcard option. Instead select install zip from internal sd card(it's misleading though but this options lets you select zip file from your external sd card) and navigate to CM9 zip file you copied to your sd card. Then flash that zip.

I have had this happen to my phone twice and nothing fixed it, had to rma it and they replaced the main board, even reflashing on their end didn't solve the problem. Both time I was using voodoo lag fix and when I disabled it to flash a new rom I got that error.
Sent from my Transformer Prime TF201 using xda premium

Vaanhoot said:
I have had this happen to my phone twice and nothing fixed it, had to rma it and they replaced the main board, even reflashing on their end didn't solve the problem. Both time I was using voodoo lag fix and when I disabled it to flash a new rom I got that error.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Do you know how much they charge for people without warranty?

there is no working solution this problem
E: failed to mount / data file(exists)

Aww, RIP captivate. Guess I should looks into a new phone.

darkpower05 said:
Aww, RIP captivate. Guess I should looks into a new phone.
Click to expand...
Click to collapse
darkpower05 said:
Do you know how much they charge for people without warranty?
Click to expand...
Click to collapse
if u know how to repair this problem so plz help us

Contact mobiletechvideos.com and chat with them and see if they can fix it. They are very reputable, fast and recommended by many here on xda.
Sent from my SGH-I897 using xda premium

4-2ndtwin said:
Contact mobiletechvideos.com and chat with them and see if they can fix it. They are very reputable, fast and recommended by many here on xda.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
okay brother i contact him
and i flash this rom
SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Uploading PIT
PIT upload successful
Uploading KERNEL
KERNEL upload successful
Uploading RECOVERY
RECOVERY upload successful
Uploading MODEM
MODEM upload successful
Uploading FACTORYFS
FACTORYFS upload successful
Uploading DBDATAFS
DBDATAFS upload successful
Uploading CACHE
CACHE upload successful
Uploading IBL+PBL
IBL+PBL upload successful
Uploading SBL
SBL upload successful
Uploading SBL2
SBL2 upload successful
Uploading PARAM
PARAM upload successful
Ending session...
Rebooting device...
Device not connected.
set on show Galaxy S logo then only touch keypad light on

Bricked phone, what can I do?

Hi there. My cousin's phone stopped working some weeks ago. He tried to wipe everything via TWRP and installing different ROMs but no ROM seems to work. Now, when he does a complete wipe, he gets the error "E:Unable to wipe '/sdcard1' -- unknown file system 'auto'" and "Unable to mount storage". Also, now everytime he tries to copy a ROM to the TWRP folder (the only folder which appears on his MacBook or his friend's PC) it stops at 16k and he can't copy it.
What can he do to fix this? Nothing seems to work and a guy at a service center said it was a disk error and that there was no hope for the phone.
Here's a screenshot of it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance!

Uhm... Why don't you remove the faulty micro SD from the phone?
This doesn't look like a bricked phone at all - "storage" and "sdcard1" refer to external storage.
Remove the phones's cover and remove the SD card (do NOT go beyond step 2, FFS). Then you can try to run some diagnostics or format it on your working phone, tablet, MAC or PC or you can buy a new one - they are quite cheap.
Then add a proper ROM (and proper GApps) on the card and stick it back in. Moto G 2014 comes in two variants - make sure your cousin's device is an actual Titan - chances are it is a Thea, if you're in Europe; that's why the TWRP doesn't want to install it. Choose one from here.
Remember you have to delete everything on the internal card through the recovery utility I see in your image before flashing a new ROM - do NOT wipe the SD Card; it stores your installation files: the properly chosen ROM and GApps you add after you format it through a different device.
If it works, make sure you do NOT format it as adopted/internal storage when/if asked by the installation wizard at first run, once the flashing is complete. This is probably why the phone got in this state in the first place.

Now I have it in my hands, this is the situation:
- Both on my PC and in TWRP it says I have 766MB free of a total of 5637MB when I don't have anything stored there and when I try to copy anything onto it it just gets stuck at 0% forever
- Tried repairing and changing file system: apparently Data is F2FS and the rest is EXT4 but everytime I try to repair or change any partition it says it worked but then it's all the same (still not working, with the file system it had before)
- Tried updating to the newest TWRP (via fastboot and also TWRP) - like what happened above, it says "done" but then it shows the TWRP version number I had before (3.0.2-3 and not the 3.1.1-0 I tried to install)
- He had no SD card inside but apparently had already tried to install a ROM with it. I put a 4GB one inside with the lastest LineageOS and all I get is "E1001: Failed to update system image unconditionally... / E:unknown command [log] / Updater process ended with ERROR: 7 / "Error installing zip file '/sdcard1/lineage.zip'
- Also the error "Unable to mount storage" is constant
I am running out of options here, don't really know what else I can do...any help? Thanks in advance!

Framboesa96 said:
Now I have it in my hands, this is the situation:
- Both on my PC and in TWRP it says I have 766MB free of a total of 5637MB when I don't have anything stored there and when I try to copy anything onto it it just gets stuck at 0% forever
- Tried repairing and changing file system: apparently Data is F2FS and the rest is EXT4 but everytime I try to repair or change any partition it says it worked but then it's all the same (still not working, with the file system it had before)
- Tried updating to the newest TWRP (via fastboot and also TWRP) - like what happened above, it says "done" but then it shows the TWRP version number I had before (3.0.2-3 and not the 3.1.1-0 I tried to install)
- He had no SD card inside but apparently had already tried to install a ROM with it. I put a 4GB one inside with the lastest LineageOS and all I get is "E1001: Failed to update system image unconditionally... / E:unknown command [log] / Updater process ended with ERROR: 7 / "Error installing zip file '/sdcard1/lineage.zip'
- Also the error "Unable to mount storage" is constant
I am running out of options here, don't really know what else I can do...any help? Thanks in advance!
Click to expand...
Click to collapse
Why don't you try reflashing the stock rom..Once I encountered a similar problem and reflashing the stock rom solved it