Related
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
So I got myself into really funny situation I'm stuck.
I worked with xperia mini pro everything was fine.
Now I got x8 well older one... And all i did was rooted it with flashtool.
Everything was working fine from that point with root rights like root uninstaller (I just tested didn't deleted anything).
And then I made "factory reset" Deletes everything from sd card and bla bla bla well you guys know what i mean.
After that I wanted to install kernel but it's not that easy. So I first read alot and did not do that. Since it would require bootloader unlock and thats pain with 11W29.
So just after factory rest somehow I bricked my phone...
But it's interesting brick... VERY INTERESTING.
It turns on, it has flash mode. I can update it via update setup and tried to do that.
Nothing helps all I get is :
phone loading normally, then there is no menu, not sony ericsson home, not go launcher, no settings available no nothing...
To explain my problem i will upload screenshot.
And I can't flash it now since it's not bootloader unlocked.
And I can't access anything from phone.
This is what you call hard brick?
Hard brick is when You can't turn on phone, so there isn't any way to install ROM again. In Your case it's strange soft brick, cause it looks like ther isn't any launcher If You can enter into flash mode than You should reinstall stock ROM and kernel using flashtool (with version 0.2.9.1 cause it's more stable with older devices, such as x8).
Its not bricked. / You can use android commander to push recovery.
It's stock already and I tried stock launcher via updatesetup of SE,
And I think i need bootloader unlock to flash it ? or I'm wrong.
And Later on i will try with older version of flashtools
thx for answers guys.
No, unlocked bootloader allows You to install custom kernels, but some ROMs works also with stock SE kernel, so You don't have to unlock bootloader to install custom ROM or back to stock ROM
So i'm back again on same problem....
I have a Question if you wanna flash phone from flashmode u don't have to have unknown sources and debugging turned on.
Since i can't do that...
My following actions :
I will try to install fresh win7 32bit, since now i'm on 64 and on this system i was working with mini pro xperia, so maybe that may be the case...
I'll try to flash it with older version of flashtools 0.2.9.1 I guess if i remember it right (but on this windows OS It gives me : Error Flashing. aborted)
And I installed flashtools drivers and everything i'm 100% sure of that.
What I tried :
I also tried flashing it from Linux / ubuntu . same as with windows i get :
Error flashing. Aborted.
PCC gives me error when i try to repair it.
Update Service Dose everything as normal but same problem remains I don't get launcher or something just that empty desktop
And I would love you guys if you would give me few links to stock firmware of
x8 11W29 / E15i
And if you have something else to suggest please help me ;D
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
X8 OFW
deamerz said:
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
Click to expand...
Click to collapse
Try Flashing This via FlashTool.
TheScriptKitty said:
Try Flashing
Click to expand...
Click to collapse
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
deamerz said:
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
Click to expand...
Click to collapse
Try Flashing a Costume ROM for stock kernel via Recovery.
Here is a list of ROMs. Just make sure you download one that says (Stock).
Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app
Hello all!
First of all, I would like to thank the entire XDA for all the help and great developers for all their hard work and everything! You're THE BEST REALLY!
I hope you could help me with my problem :/
A few days ago, I flashed a custom rom (i've changed a lot of them already and this has never happened to me before). After flashing the phone the android system worked perfectly fine but after rebooting, phone just keept (and still is) restarting every 3 seconds. I cannot go into CWM recovery, only into Download mode. I've tried flashing stock rom with odin and in the end when it says > Close serial port and wait until rebooting, phone just keeps rebooting again. (Black screen, flash for a second and then again reboot). I've found someone on YT who has recorded the same problem so that you would understand what am I trying to say.
Type SAMSUNG GALAXY ACE (NEED HELP IT WON'T BOOT!) into YT and you will see the problem. ( i cannot paste the link)
What could i do? Btw, i've searched the forums for solutions but i didn't find a single 1 that would help me I cannot do it even with odin
PLEASEE HELP ME
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
Hi! I think your rom (read only memory) got demaged so nobody can help you now
MeltingSnowman said:
Hi! I think your rom (read only memory) got demaged so nobody can help you now
Click to expand...
Click to collapse
Hello! So the only option would be to change the motherboard I guess?:/ Phone is in warranty unitil 17th of February but I don't know if they will repair it because I don't have stock rom on it anymore :/. I've changed many roms and the latest installed is CM10. Do you think that they will see which ROM and other stuff is on if It doesn't even boot? Is there a change that I could format the intrernal storage to cover up my previous installations? (hope you understand what I am trying to say)
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
I understand what you mean, don't worry I think you should try the recovery procedure to unbrick the Ace as last thing you can do to use it back again. If EVRYTHING you can do (or you want to do) doesen't work send your device to service and hope that Samsung repair it for free because covered by warranty. Probably they will never know what you've done on it because memory is demaged. Some time ago I was too lazy to flash an original stock rom and I could not find the one I needed on the web so I sent my device to service with CWM on and no rom (formatted partition) and got it back with stock rom for free (was in warranty time). Best whishes
Inviato dal mio GT-S5830
Ok was afraid that you wouldn't hehe Yea well I tried like 10 times already with Odin but the problem is when Odin is kind of finished and it's time for phone restarting, phone just gets into a bootloop again (or how is it called). So I don't know :/ Maybe I need a new boot file? I can only enter download mode but unable to enter any recoveries modes although I have CWM. Ok I hope so, will probaby take it to the service tomorrow. Btw, do you know any other recovery procedures besides Odin? And thanks a lot for replying to my problem
If you have download mode still try kies to see if it will flash stock again
Sent from my GT-S5830
Ok thank you! Haven't tried that yet. Gonna try it right now.
Or try a different rom downloaded for xda and reflash, sometimes some roms get corrupted
Sent from my GT-S5830
Tried to use KIES but it says that the phone is unsupported :S Could the problem be that I'm using Win8? I've tried other roms already but I think that MeltingSnowman is right, it's damaged and I guess it's only fixable at service.
Nothing to do with win8 really and what method are you using on odin ? One package method or are you using all options
And try using a diff sd card as i had a damaged one that effected my flashing a while back
Sent from my GT-S5830
Oh ok I just thought that the compatibility could be the problem. I'm using one package method because I cannot find other single files :/. I've serched google already but all I ever found ware one packages. Sd card is fine. Do you maybe know where I could find single files? Please don't think that I am lazy but I really haven't found them
Your single files are in your rom you already have downloaded you just untick one package then apply them one by one which rom are you trying to flash ?
Sent from my GT-S5830
I've downloaded some stock 2.3.6 from SamFirmware but it's only 1 file (.tar )S5830DXKT7_S5830OLBKT3_S5830DXKT5_HOME.tar.md5.
It most likely to be a corrupt file, iv heard all sorts of stories from that site, find a stock rom on here thats flashable through odin and try your one package method again and also download the cooper ops file again, if you go to stickies at the top of this forum you will find what you need and hopefully get your ace to boot up again
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GT-S5830
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
Inviato dal mio GT-S5830
Why cant there be a corrupt or faulty file ?
Sent from my GT-S5830
Didn't find any of these files. :/ Only ZIP files which are, If I am not mistaken, only supported by CWM.
MeltingSnowman said:
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
3) I already tought of that but I couldn't find a way to install it, nor the bootloader itself. Hope some1 could provide this.
Click to expand...
Click to collapse
Did you download the coopers ops file again from the link i sent you and try and get stock XWKTR firmware from samfirmware site i flashed it today and im currently using it and put your phone in download mode and try and flash again ill keep looking around to see if i can help you further
Sent from my GT-S5830
---------- Post added 24th January 2013 at 12:03 AM ---------- Previous post was 23rd January 2013 at 11:56 PM ----------
Here is a link for cwm recovery via odin http://forum.xda-developers.com/showthread.php?t=1465599
Sent from my GT-S5830
Still can't access CWM. Bootloops continue. I don't know what to do anymore. I've tried almost everything really. Will probaby sent it to repair tomorrow, I don't see any other option :/
After installing JellyPlus and Cor Plenus kernel on my Galaxy Mini for program compatibility, I find the rom a little unstable, and wish to retun the phone to its origional status
Using CWM to load new rom gives error of there not being enough room on the device
Using Odin downloader, either the phone is not recognised, or the operation works, but sends the phone into boot loop, depending on the version of Odin I use
Using Kies, well, my phone is not 5570 any more, but a 5360 which is not supported for firmware upgrade
I am computer literate, Pc, Tablets, Windows, Android etc - No, I only thought I was
I have tried many things, and do not see how to revert the phone to factory (ie GT-S5570I STOCK ROM from its current status of GT-S5360)
Please, please help. I am happy to take a big kicking if this is easy, obvious, or many times previously covered - a push in the right direction would be greatly appreciated
Thank you, Paul
If you have bootloop, wipe data from stock recovery. And as I read read your post, you flashed Mini Plus ROM and kernel! So be happy, that your phone works!
Sent from my GT-S5570 using xda premium
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
dheeraj (dhlalit11) said:
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
Click to expand...
Click to collapse
Same thing lol
Be happy, it still works!
Sent from my GT-S5570 using xda premium
What I did.!
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
hmm try to flash a kernel made for ur device , coz the kernel has the main properties of ur device for kies to detect, tat shud be ok,wont be requiring much space for kernel flashing i suppose :good:
btw there shudnt besuch errors, the updater script is acually set to swipe everything out b4 cpying the new files into ur rom
or else flash a custom rom, its easy tat way
just flash a firnware through odin
dheeraj (dhlalit11) said:
just flash a firmware through Odin
Click to expand...
Click to collapse
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Fix for bootloop: wipe data from stock recovery. Is it hard to read/search?
Tapatalk 2-vel küldve az én GT-S5570-ről
rpaurey said:
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
Click to expand...
Click to collapse
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
shwe said:
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
Click to expand...
Click to collapse
Thank you, and .......... thank you!! I may be being hysterical, but main reason for wanting to go back to original is because the phone now often is stuck with emergency calls only. On rebooting I also sometimes get an Unlock Network screen (should I have unlocked the phone first? Hmm - I have read so much over the last few days that I am not too sure any more. Shall try flashing the original firmware cwm or odin, or both??!! Have you any views on the problems that >I have re the above posts? Kind regards, Paul PS sim works as normal in nokia phone
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
all done and dusted
shwe said:
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
Click to expand...
Click to collapse
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Same problem
rpaurey said:
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Click to expand...
Click to collapse
Hi, I have the same problem. Can you please send yours zip and instructions? For 5570 Odin not sees my phone and for 5360 See, but I do not know how to enter the pit. With it a little scared. I tried. Zip update, but everything just mods for 5570, which is now reports differently and therefore probably do not install via clockwork.
I play with it all day and google it to me a little laugh .. omg (when you have 20 tabs open and there is a mess).
Problem solved
So we solved the problem with rpaurey successfully. Odin really need to be right on the GT-S5570I and I think "I" even at the end.
Stock rom I had only a little English and other languages, but downloading Czech now. Thanks.