Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app
Related
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
TwinCalibre said:
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
Click to expand...
Click to collapse
Did you install the drivers? Does Odin find your tab?
EDIT: this http://forum.xda-developers.com/showthread.php?t=1315364 is CWM flashable firmware, you can't flash this with Odin!
Yeah it finds it, and i ahve the drivers installed, ahh how stupid of me lol, well atm im downloading the asian firmware from samsfirmware, which i will try to use, and then I will flash it with http://forum.xda-developers.com/showthread.php?t=1315364, will this work? or am i being stupid again?
Thanks for the help!
How did you brick it in the first place? What did you try to do?
If you are in Europe, why not just flash European firmware on it?
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
TwinCalibre said:
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
Click to expand...
Click to collapse
You have a WIFI only GT8.9 (P7310), correct?
http://www.hotfile.com/dl/135410941/a028c7d/P7310XXKJ4_P7310XEUKJ4_XEU.zip.html < this should work.
Check out this guide on how to use Odin > http://forum.xda-developers.com/showthread.php?t=1406137
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
TwinCalibre said:
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
Click to expand...
Click to collapse
Yes, it should work. Just make sure you download the correct files for your device.
Hi
i can borrow this tread.
I just rooted my gtab 8.9 wifi (eu)and all just fine and i install superuser and got well this time too...then i install clockwork mode and install drivers for CWM 4.0 bla bla work fine...then when i try to put tab in recovery mode goes wrong only black screen..I have tried to put tab in download mode and recovery manually Still nothing happens...only what happened is my tab going in loop to logo and again and again.
Have tried put on download mode but still black and odin don't find it.(after 5 sec in download mode then beginning looping)
Have tried put on recovery mod but still black screen and beginning looping after 5 sec.
So what to do folks? Need badly help here plz!!!
This tread i bin used to root:
http://forum.xda-developers.com/showthread.php?t=1287205
Edit: After trying and trying i made it download mode and flash off kernel and now is working
same problem
hi, I just had the same problem, I downloaded the file from hotfile, but when I try to open it with winrar it say that theres a password, anyone know which is the password please???
Samfirmware.com
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
Hey guys,
i have a big problem with my Samsung GALAXY ACE GT-S5830i.
My screen is always stuck at GALAXY ACE GT-S5830i and it just wont go away, i dont know how to fix it. I am using this phone for 1 week and i already brick it or something.
This is the video i was trying to follow :
/watch?v=PFeXXWM-0Xg
(cant post links yet, just add that after youtube.com/ )
I did all the steps he said (under video are all the steps).
I rooted my phone
I tryed to install ClockWorkMod 5 but i got somekind of error i dont remember
And then i got into CyanogenMod 9 ,it installed all right but then when i restarted my phone whole hell gone wrong...
I can get into recovery mode, i cant get into download mode .....
I really need help with this guys, and yes i know i am stupid but i will never do it again.
Please help
Doesn't looks like its bricked if its showing S5830i on the screen, just a soft brick though.
You need to read more mate, that CM9 rom is for S5830 only, not S5830i.
These are both very different models, dunno why samsung gave them the same name.
There is no custom roms for S5830i yet, and you cannot use any rom built for S5830.
You can just flash a stock firmware via Odin and your phone will be back online.
Here read this tut, specially the Odin part.
http://forum.xda-developers.com/showthread.php?t=1552792
Read this too if you mess again ever, just use the S5830i button combo for download mode instead of ace's.
http://forum.xda-developers.com/showthread.php?t=1071970
ayush29k said:
Doesn't looks like its bricked if its showing S5830i on the screen.
You need to read more mate, that CM9 rom is for S5830 only, not S5830i.
These are both very different models, dunno why samsung gave them the same name.
There is no custom rom for S5830i yet, and you cannot use any rom built for S5830.
You can just flash a stock firmware via Odin and your phone will be back online.
Here read this tut, specially the Odin part.
http://forum.xda-developers.com/showthread.php?t=1552792
Click to expand...
Click to collapse
Cheers mate, i will try this and let you know what will happen.
The problem is now my pc dont detect usb cable, so i cant copy files/zip to my sd card, before was all working fine but now i cant enable my usb connection
Mate sorry but i am little noobish for this...
Would you mind if you tell me step by step what to do....i mean i just dont know what to do
All i can say is that since all this mess i cant use (phone-pc usb cable) ...my pc just dont show up memory card.
Please help
You can use a card reader, or any other phone as a card reader.
Steps are clearly given in the tutorial by ickkyy, and further flashguide through odin is there at sammobile.com along with all the files you'll need with Odin.
Stop panicking, just read the tut once, and follow it, you'll recover easy.
Wow its fixed i am so happy thanks mate
Good to know mate :good:
Be careful in the future man, don't flash things not meant for your phone....
Yeah i will not
But are there like any themes or addons or roms for my phone ? Cuz i would really like to change this default one...
Just one rom, its released today by team cooper, check the dev section for retribution rom.
Hello all!
First of all, I would like to thank the entire XDA for all the help and great developers for all their hard work and everything! You're THE BEST REALLY!
I hope you could help me with my problem :/
A few days ago, I flashed a custom rom (i've changed a lot of them already and this has never happened to me before). After flashing the phone the android system worked perfectly fine but after rebooting, phone just keept (and still is) restarting every 3 seconds. I cannot go into CWM recovery, only into Download mode. I've tried flashing stock rom with odin and in the end when it says > Close serial port and wait until rebooting, phone just keeps rebooting again. (Black screen, flash for a second and then again reboot). I've found someone on YT who has recorded the same problem so that you would understand what am I trying to say.
Type SAMSUNG GALAXY ACE (NEED HELP IT WON'T BOOT!) into YT and you will see the problem. ( i cannot paste the link)
What could i do? Btw, i've searched the forums for solutions but i didn't find a single 1 that would help me I cannot do it even with odin
PLEASEE HELP ME
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
Hi! I think your rom (read only memory) got demaged so nobody can help you now
MeltingSnowman said:
Hi! I think your rom (read only memory) got demaged so nobody can help you now
Click to expand...
Click to collapse
Hello! So the only option would be to change the motherboard I guess?:/ Phone is in warranty unitil 17th of February but I don't know if they will repair it because I don't have stock rom on it anymore :/. I've changed many roms and the latest installed is CM10. Do you think that they will see which ROM and other stuff is on if It doesn't even boot? Is there a change that I could format the intrernal storage to cover up my previous installations? (hope you understand what I am trying to say)
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
I understand what you mean, don't worry I think you should try the recovery procedure to unbrick the Ace as last thing you can do to use it back again. If EVRYTHING you can do (or you want to do) doesen't work send your device to service and hope that Samsung repair it for free because covered by warranty. Probably they will never know what you've done on it because memory is demaged. Some time ago I was too lazy to flash an original stock rom and I could not find the one I needed on the web so I sent my device to service with CWM on and no rom (formatted partition) and got it back with stock rom for free (was in warranty time). Best whishes
Inviato dal mio GT-S5830
Ok was afraid that you wouldn't hehe Yea well I tried like 10 times already with Odin but the problem is when Odin is kind of finished and it's time for phone restarting, phone just gets into a bootloop again (or how is it called). So I don't know :/ Maybe I need a new boot file? I can only enter download mode but unable to enter any recoveries modes although I have CWM. Ok I hope so, will probaby take it to the service tomorrow. Btw, do you know any other recovery procedures besides Odin? And thanks a lot for replying to my problem
If you have download mode still try kies to see if it will flash stock again
Sent from my GT-S5830
Ok thank you! Haven't tried that yet. Gonna try it right now.
Or try a different rom downloaded for xda and reflash, sometimes some roms get corrupted
Sent from my GT-S5830
Tried to use KIES but it says that the phone is unsupported :S Could the problem be that I'm using Win8? I've tried other roms already but I think that MeltingSnowman is right, it's damaged and I guess it's only fixable at service.
Nothing to do with win8 really and what method are you using on odin ? One package method or are you using all options
And try using a diff sd card as i had a damaged one that effected my flashing a while back
Sent from my GT-S5830
Oh ok I just thought that the compatibility could be the problem. I'm using one package method because I cannot find other single files :/. I've serched google already but all I ever found ware one packages. Sd card is fine. Do you maybe know where I could find single files? Please don't think that I am lazy but I really haven't found them
Your single files are in your rom you already have downloaded you just untick one package then apply them one by one which rom are you trying to flash ?
Sent from my GT-S5830
I've downloaded some stock 2.3.6 from SamFirmware but it's only 1 file (.tar )S5830DXKT7_S5830OLBKT3_S5830DXKT5_HOME.tar.md5.
It most likely to be a corrupt file, iv heard all sorts of stories from that site, find a stock rom on here thats flashable through odin and try your one package method again and also download the cooper ops file again, if you go to stickies at the top of this forum you will find what you need and hopefully get your ace to boot up again
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GT-S5830
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
Inviato dal mio GT-S5830
Why cant there be a corrupt or faulty file ?
Sent from my GT-S5830
Didn't find any of these files. :/ Only ZIP files which are, If I am not mistaken, only supported by CWM.
MeltingSnowman said:
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
3) I already tought of that but I couldn't find a way to install it, nor the bootloader itself. Hope some1 could provide this.
Click to expand...
Click to collapse
Did you download the coopers ops file again from the link i sent you and try and get stock XWKTR firmware from samfirmware site i flashed it today and im currently using it and put your phone in download mode and try and flash again ill keep looking around to see if i can help you further
Sent from my GT-S5830
---------- Post added 24th January 2013 at 12:03 AM ---------- Previous post was 23rd January 2013 at 11:56 PM ----------
Here is a link for cwm recovery via odin http://forum.xda-developers.com/showthread.php?t=1465599
Sent from my GT-S5830
Still can't access CWM. Bootloops continue. I don't know what to do anymore. I've tried almost everything really. Will probaby sent it to repair tomorrow, I don't see any other option :/
Hi peep's!
Hope someone can help me. I've been installing lots of roms and found one i liked but then i got too big for my boots (i think). I decided to try the Miui v4 rom yesterday and it was ok apart from swap support so i thought i'd be clever and install the Kernel from "Super Stock". After searching i found it was called "Thunderkernel 2.2". So i installed it via cwm and it booted to a black screen.
I've now tried everything with odin. It detects the phone if i take battery out, hold "vol up + down, home and power and put battery in but it sticks at setup connection. I can even unplug the phone and plug back in and it recognises it after doing the battery trick but still sticks at setup connection. I've tried reinstalling drivers, tried all the odins and shut down everything that may interfere with com's but to no avail. I thought a wrong kernel would at most stop the rom from booting, i never dreamed it would hard brick my phone.
So is this the end of my ace? is it worth me buying a usb jig?
This is pretty much what happened to me last year. I would advise the users to stay away from miui ROM as they may cause problem with some phone. Your device is bricked . jig may fix it but it depends on your luck
Falcon G said:
This is pretty much what happened to me last year. I would advise the users to stay away from miui ROM as they may cause problem with some phone. Your device is bricked . jig may fix it but it depends on your luck
Click to expand...
Click to collapse
I pretty much thought that'd be the case, i suppose i may as well try the jig as they're only cheap. Wish i'd just stuck with super stock. I was actually enjoying the ace for the first time it wasn't just a phone to me, at stock it was very limited. Oh well . Picked up an xperia m now but would be nice to get the ace working for my 3 sim. I'll post if it works or not, incase anyone else runs into the same problem. Thanks for the reply!
Way333 said:
I pretty much thought that'd be the case, i suppose i may as well try the jig as they're only cheap. Wish i'd just stuck with super stock. I was actually enjoying the ace for the first time it wasn't just a phone to me, at stock it was very limited. Oh well . Picked up an xperia m now but would be nice to get the ace working for my 3 sim. I'll post if it works or not, incase anyone else runs into the same problem. Thanks for the reply!
Click to expand...
Click to collapse
Hmm yeah I felt the same way. It really sucks that I installed a bad rom.
All the best though. And yeah do post your results here [emoji6]
Way333 said:
Hi peep's!
Hope someone can help me. I've been installing lots of roms and found one i liked but then i got too big for my boots (i think). I decided to try the Miui v4 rom yesterday and it was ok apart from swap support so i thought i'd be clever and install the Kernel from "Super Stock". After searching i found it was called "Thunderkernel 2.2". So i installed it via cwm and it booted to a black screen.
I've now tried everything with odin. It detects the phone if i take battery out, hold "vol up + down, home and power and put battery in but it sticks at setup connection. I can even unplug the phone and plug back in and it recognises it after doing the battery trick but still sticks at setup connection. I've tried reinstalling drivers, tried all the odins and shut down everything that may interfere with com's but to no avail. I thought a wrong kernel would at most stop the rom from booting, i never dreamed it would hard brick my phone.
So is this the end of my ace? is it worth me buying a usb jig?
Click to expand...
Click to collapse
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Viper The Ripper said:
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Click to expand...
Click to collapse
Yeah i thought it strange! All things seemed to add up to it being the wrong kernel. Went wrong after kernel flash was fine b4. If the rom wasn't gonna work with a kernel for the device it wouldn't brick the phone would it, the rom just wouldn't boot, unless the kernel is the wrong one for the device. Thanks for clearing that up! I'm usually good with studying first and not making mistakes.Oh well live and learn.
Viper The Ripper said:
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Click to expand...
Click to collapse
Hi I didn't flashed the thundrbolt kernel.I just flashed this Rom. http://forum.xda-developers.com/showthread.php?t=2280553&page=25
It gave me an error while flashing. I even wiped completely and then flashed another cm11 Rom. But when I rebooted it just became dead
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Way333 said:
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Click to expand...
Click to collapse
Hi I couldn't even get my phone to get recognized in the devices and printers menu. I don't really think it could be done with samsung drivers.
But hey did your PC recognized your device?
Way333 said:
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Click to expand...
Click to collapse
Ouh!! , I'm sorry mate
Falcon G said:
Hi I couldn't even get my phone to get recognized in the devices and printers menu. I don't really think it could be done with samsung drivers.
But hey did your PC recognized your device?
Click to expand...
Click to collapse
Sorry m8 been real busy. Yeah my pc recognizes it but i have to hold all the buttons down and slip in the battery. Comes up yellow in the coms box in odin and shows in the devices and printers menu without the caution sign. I can do that whole process but it's just the odin drivers part that doesn't happen for me. So still sits on setup connection It was a long shot but worth a try
I wish now i'd never strayed from here. I used google to find that kernel. If i'd have never done that i wouldn't be in this situation!