Hi peep's!
Hope someone can help me. I've been installing lots of roms and found one i liked but then i got too big for my boots (i think). I decided to try the Miui v4 rom yesterday and it was ok apart from swap support so i thought i'd be clever and install the Kernel from "Super Stock". After searching i found it was called "Thunderkernel 2.2". So i installed it via cwm and it booted to a black screen.
I've now tried everything with odin. It detects the phone if i take battery out, hold "vol up + down, home and power and put battery in but it sticks at setup connection. I can even unplug the phone and plug back in and it recognises it after doing the battery trick but still sticks at setup connection. I've tried reinstalling drivers, tried all the odins and shut down everything that may interfere with com's but to no avail. I thought a wrong kernel would at most stop the rom from booting, i never dreamed it would hard brick my phone.
So is this the end of my ace? is it worth me buying a usb jig?
This is pretty much what happened to me last year. I would advise the users to stay away from miui ROM as they may cause problem with some phone. Your device is bricked . jig may fix it but it depends on your luck
Falcon G said:
This is pretty much what happened to me last year. I would advise the users to stay away from miui ROM as they may cause problem with some phone. Your device is bricked . jig may fix it but it depends on your luck
Click to expand...
Click to collapse
I pretty much thought that'd be the case, i suppose i may as well try the jig as they're only cheap. Wish i'd just stuck with super stock. I was actually enjoying the ace for the first time it wasn't just a phone to me, at stock it was very limited. Oh well . Picked up an xperia m now but would be nice to get the ace working for my 3 sim. I'll post if it works or not, incase anyone else runs into the same problem. Thanks for the reply!
Way333 said:
I pretty much thought that'd be the case, i suppose i may as well try the jig as they're only cheap. Wish i'd just stuck with super stock. I was actually enjoying the ace for the first time it wasn't just a phone to me, at stock it was very limited. Oh well . Picked up an xperia m now but would be nice to get the ace working for my 3 sim. I'll post if it works or not, incase anyone else runs into the same problem. Thanks for the reply!
Click to expand...
Click to collapse
Hmm yeah I felt the same way. It really sucks that I installed a bad rom.
All the best though. And yeah do post your results here [emoji6]
Way333 said:
Hi peep's!
Hope someone can help me. I've been installing lots of roms and found one i liked but then i got too big for my boots (i think). I decided to try the Miui v4 rom yesterday and it was ok apart from swap support so i thought i'd be clever and install the Kernel from "Super Stock". After searching i found it was called "Thunderkernel 2.2". So i installed it via cwm and it booted to a black screen.
I've now tried everything with odin. It detects the phone if i take battery out, hold "vol up + down, home and power and put battery in but it sticks at setup connection. I can even unplug the phone and plug back in and it recognises it after doing the battery trick but still sticks at setup connection. I've tried reinstalling drivers, tried all the odins and shut down everything that may interfere with com's but to no avail. I thought a wrong kernel would at most stop the rom from booting, i never dreamed it would hard brick my phone.
So is this the end of my ace? is it worth me buying a usb jig?
Click to expand...
Click to collapse
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Viper The Ripper said:
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Click to expand...
Click to collapse
Yeah i thought it strange! All things seemed to add up to it being the wrong kernel. Went wrong after kernel flash was fine b4. If the rom wasn't gonna work with a kernel for the device it wouldn't brick the phone would it, the rom just wouldn't boot, unless the kernel is the wrong one for the device. Thanks for clearing that up! I'm usually good with studying first and not making mistakes.Oh well live and learn.
Viper The Ripper said:
Where did you find the Thunderkernel 2.2?...
@Falcon G @Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
That means that you flashed an INCOMPATIBLE KERNEL!!! if you flasehd the thunderboltkernel 2.2
Thunderboltkernel is only for GT-S5830i be carefull with it mates!
Click to expand...
Click to collapse
Hi I didn't flashed the thundrbolt kernel.I just flashed this Rom. http://forum.xda-developers.com/showthread.php?t=2280553&page=25
It gave me an error while flashing. I even wiped completely and then flashed another cm11 Rom. But when I rebooted it just became dead
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Way333 said:
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Click to expand...
Click to collapse
Hi I couldn't even get my phone to get recognized in the devices and printers menu. I don't really think it could be done with samsung drivers.
But hey did your PC recognized your device?
Way333 said:
@Falcon G @Viper The Ripper
Ok I received the jig and It never worked. I tried the standard way and I tried doing all sorts of things but to no avail.
A few days ago I found a guide to a procedure for the s5570 (below) which blames drivers for the "setup connection" error and I thought the same would be applicable to the ace. I know the procedure well now as I've done it so many times and all goes well until the point where the odin drivers are supposed to configure, they never do. The guy who wrote the guide no longer responds as he changed phones.
Several people reported success with their s5570's. I wondered if anyone here may be familiar with the procedure and able to help?
http://androidforums.com/threads/tutorial-unbrick-mini-s5570-bricked-with-black-screen.407866/
Click to expand...
Click to collapse
Ouh!! , I'm sorry mate
Falcon G said:
Hi I couldn't even get my phone to get recognized in the devices and printers menu. I don't really think it could be done with samsung drivers.
But hey did your PC recognized your device?
Click to expand...
Click to collapse
Sorry m8 been real busy. Yeah my pc recognizes it but i have to hold all the buttons down and slip in the battery. Comes up yellow in the coms box in odin and shows in the devices and printers menu without the caution sign. I can do that whole process but it's just the odin drivers part that doesn't happen for me. So still sits on setup connection It was a long shot but worth a try
I wish now i'd never strayed from here. I used google to find that kernel. If i'd have never done that i wouldn't be in this situation!
Related
Long story short;
its dead. Its refusing to charge (the charge screen comes on when its off, but it doesnt actually charge)
Not going into download, or recovery, or turning on at all.
Managed to get into download mode after trying to charge it but my PC isnt recognising it.
I tried out Honeycomb, followed the steps to flash back, tried out Overcome Hermes, no problem. Flashed CM7, no problem. Tried to restore my nandroid for CM7, thats when this started.
Any advice?
And apologies if there has been a similar thread to this, I searched but i couldnt find any threads quite like this.
GANJDROID said:
Long story short;
its dead. Its refusing to charge (the charge screen comes on when its off, but it doesnt actually charge)
Not going into download, or recovery, or turning on at all.
Managed to get into download mode after trying to charge it but my PC isnt recognising it.
I tried out Honeycomb, followed the steps to flash back, tried out Overcome Hermes, no problem. Flashed CM7, no problem. Tried to restore my nandroid for CM7, thats when this started.
Any advice?
And apologies if there has been a similar thread to this, I searched but i couldnt find any threads quite like this.
Click to expand...
Click to collapse
omg Gang i'm really sorry for this to happen to u ..
did you re-installed Kies in your pc , ? then odin will recognize your tab
hey Gang .. did you re-install the kies or no ? ? ? can you pls update ? ? ? ?
I think its more a problem with my Tab than the PC.
As the PC isnt recognising the Tab at all then the driver install doesnt see anything it needs drivers for. If that makes sense..
what you gonna lose if you tried ? ? ? uninstall the damn kies and install it again , and make sure , then you can say its not making any sense
Kies installs drivers for devices it connects, if my pc isnt connecting then there isnt any point. Yesterday it was fine, since my Tab ****ed up, nothing is happening.
Edit: Nevermind, while charging i went into download mode again, but this time it connected.
*massive sigh of relief*
GANJDROID said:
Kies installs drivers for devices it connects, if my pc isnt connecting then there isnt any point. Yesterday it was fine, since my Tab ****ed up, nothing is happening.
Edit: Nevermind, while charging i went into download mode again, but this time it connected.
*massive sigh of relief*
Click to expand...
Click to collapse
congrats , glad to hear that ... you better watchout next time
k0sh said:
congrats , glad to hear that ... you better watchout next time
Click to expand...
Click to collapse
You say that, but i didnt do anything wrong..
I returned from Honeycomb to OVercome without issues. I went to CM7 without issues. I restored the nandroid using the same recovery i used to do the backup. The backup was fine as id used it before.
GANJDROID said:
You say that, but i didnt do anything wrong..
I returned from Honeycomb to OVercome without issues. I went to CM7 without issues. I restored the nandroid using the same recovery i used to do the backup. The backup was fine as id used it before.
Click to expand...
Click to collapse
i mentioned it before , that the nandroid bakcups and restoring after updating to gingerbread is not working well ... i don't even do any backups anymore . just titanium bp .. anyways i'm really happy that you got your tab a life again
True, but i think one issues people have is you need to use the same recovery version you used to backup and to restore.
But thanks anyway dude.
GANJDROID said:
True, but i think one issues people have is you need to use the same recovery version you used to backup and to restore.
But thanks anyway dude.
Click to expand...
Click to collapse
+1 . even though it will be a risky ..
no need for the thanks i didn't do anything though
just keep your lovely boy safe
Ok! I bought a Samsung P1000N Galaxy Tab from ClaroPR this week. Like always with every android devices i have i rooted it with superoneclick. Yesterday i was trying to update the tablet to gingerbread since it had Froyo. Follow the tutorials in here to flash it(I guess i didnt read the warnings about the secure bootloaders or something like that) but the thing is that i ended up softbricking my device. The gingerbread i was trying to flash was the JQ1. Anyways, i tried to flash it using Odin 1.7, it ended up failing and now i just have the cell triangle and computer logo of dead on the screen. Thing is that i know its not supposed to be totally bricked. But then in the device manager it doesnt show as samsung composite device or anything like that. I need help from someone who has gone thru this already and knows what to do. Or is it just a brick and thats it? Thanks...
enelyam said:
Ok! I bought a Samsung P1000N Galaxy Tab from ClaroPR this week. Like always with every android devices i have i rooted it with superoneclick. Yesterday i was trying to update the tablet to gingerbread since it had Froyo. Follow the tutorials in here to flash it(I guess i didnt read the warnings about the secure bootloaders or something like that) but the thing is that i ended up softbricking my device. The gingerbread i was trying to flash was the JQ1. Anyways, i tried to flash it using Odin 1.7, it ended up failing and now i just have the cell triangle and computer logo of dead on the screen. Thing is that i know its not supposed to be totally bricked. But then in the device manager it doesnt show as samsung composite device or anything like that. I need help from someone who has gone thru this already and knows what to do. Or is it just a brick and thats it? Thanks...
Click to expand...
Click to collapse
If you get anything on the screen at all (Triangle, Download mode, Samsung logo, etc...) It's not bricked, just sponged. Unfortunately I don't have any experience with the P1000N, but in general, try reloading the samsung drivers and try another USB port. Once you get it to show up in device mangler you can push the right tar with Odin and you'll be cooking with gas again. Sorry I can't help with this specific model, but sammy devices in general are hard to truly "brick"
Okay i think now its dead. It turned off when it lost the charge and now not even Heimdall recognize it. So if someone knows about a good tutorial on Jtaging this i will appreciate.
Edit: Found useful guide in here to resurrect it so i will give that a try...
The Unbrickable Mod works like a champ! I know, because I had to resort to this over this last weekend.
However, it does require mods to the mainboard that require some skill. Once accomplished, it is virtually impossible to brick your Tab.
http://forum.xda-developers.com/showthread.php?t=1338073
enelyam said:
Okay i think now its dead. It turned off when it lost the charge and now not even Heimdall recognize it. So if someone knows about a good tutorial on Jtaging this i will appreciate.
Edit: Found useful guide in here to resurrect it so i will give that a try...
Click to expand...
Click to collapse
Why you want to go for Jtag just becoz battery is dead. Get the Tab Opened, Recharge the battery externally (Repair/Service Center should help). Follow the Team Overcome Guide to install the Stock Safe Rom and then you can either continue with it or move to any other ROM of your choice.
I would keep JTAG as the Last option.
If it's new Tab, it should still be under warranty.
wow, impressive post (the unbrickable mod).. Not sure I'd have the guts to do that though..
Hello guys.
I really need some help. Im going away for 2 weeks on 4 June. And after i come back ill be ghone after 2 days again for 2 weeks and i need my phone!
My story:
I saw an update for my phone to ICS. So i plugged on my laptop and put the update on with KIES 2.1.3.
At about 64% the update didnt go ferther and it gave an error report.
The program KIES shut down, and my phone turned off.
I putted everything back on. But now my phone says this:
''Firmware upgrade encountered an issue. Please select recovery mode in KIES & try again.''
KIES doesnt see my phone anymore. And the recovery mode i found on the internet.
Volume button up, home button+ power button doesnt work.
It keeps going to this screen.
My phone was 2.3.6 standard, non rooted etc etc.
How can i fix this fast?
I tried rooting and flashing, but i just cant do anything with my phone exept this screen i explained.
Thanks in advance.
Mitchell
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Belfia said:
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Click to expand...
Click to collapse
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
damitch300 said:
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
Click to expand...
Click to collapse
Just download ODIN app for Windows, get right stock firmware from development thread ( Dr. Ketan's post ) and flash it with ODIN. It's as simple as clicking select file and start. Everything is described in the thread with firmware downloads.
Yes. Then there is hope. Now I recommend you to try flashing one of the stock roms from dr.ketans thread in development section.
Its not very complicated. But feel free to ask if you need more help.
I just cant explain how happy i am with this forum.
Brings so much luck into live
Thanks.
Ill see if i need more help. Hopefully not.
Is there any dutch ICS rom?
Or should i stick with a basic english?
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manual. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Good thing we can help. Wouldnt call myself an expert though
damulder said:
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manuel. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Click to expand...
Click to collapse
Well i searched for hours to. My sister had her S2 upgraded with KIES. That worked, but the ICS update itself was plain suck.
I fixed it thanks to XDA forum. Nothing found on the internet exept sending to help desk.
Same with what i got now.
But now it is fixed and im thankfull to the ones helping.
Now i am willing to try ICS without KIES.
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Like i said, KIES didnt see my phone. Neither did windows.
So it wasnt an option.
Glad its fixed
Sent from my GT-N7000 using Tapatalk 2
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
damulder said:
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
Click to expand...
Click to collapse
For me this didnt work. KIES had an upgrade, but seems like it still doesnt do the job right.
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
damitch300 said:
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
Click to expand...
Click to collapse
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
ngocdao said:
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
Click to expand...
Click to collapse
W7 Ultimate N
And trying out different KIES versions.
Well at the 2nd update 2.3.6 to 4.0.3 it ran stuck again.
And now Odin doesnt do anything to aswell. Keeps saying ''Failure'' after some time.
Now ODIN is stuck at syaing ''BOOT'' above ID:COM.
How can i fix this?
Well seems like the Dutch roms aint working.
I did an European right now wich worked.
Right guys, i know youve read this alot. and i know your thinking i should have searched the threads for a sulotion, but belive me i have, for days.
heres my problem, i was flasing the leaked ics onto my p990. whilst flashing, my laptop ran out of battery and didnt give me any warning atall. and as a result of that, i now have i belive a bricked p990. this is the rom i was flashing:
http://forum.xda-developers.com/showthread.php?t=1926700
right now i know i should be able to recover my phone as i can connect my phone and it recognises it as apx driver, but the trouble is i can put in updating mode. ( vol down and then inserting usb) i plug in the usb without the battery inserted and without pushing any buttons and it still recognises it as an apx device, knowing this, ive tried nvflash and smart flash but both have no effect and dont recognise my phone. i will add that the version of ics that is currently out leaked. is very smooth, unfortunately bluetooth pairing doesnt work properly and wifi is a bit weak, but theres a fix for that.
i have tried flashing a cwm but to no succes. i do know some things in android flashing and repairs, but admittidly not everything so im not a complete noob.
id very much apreciate it if anyone could help me.
youll have to excuse any typing mistakes. the resolution on the tv isnt that great from a laptop hdmi out. sorry guys.
but yes any help is much appreciated.
thanks in advance guys
ricky
well, windows MUST recognize the o2x as an apx device since you would use the tegra apx applications processors...
you are saying that windows sees your o2x as an apx device but nv/smart-flash don't?
rdr1991 said:
Right guys, i know youve read this alot. and i know your thinking i should have searched the threads for a sulotion, but belive me i have, for days.
heres my problem, i was flasing the leaked ics onto my p990. whilst flashing, my laptop ran out of battery and didnt give me any warning atall. and as a result of that, i now have i belive a bricked p990. this is the rom i was flashing:
http://forum.xda-developers.com/showthread.php?t=1926700
right now i know i should be able to recover my phone as i can connect my phone and it recognises it as apx driver, but the trouble is i can put in updating mode. ( vol down and then inserting usb) i plug in the usb without the battery inserted and without pushing any buttons and it still recognises it as an apx device, knowing this, ive tried nvflash and smart flash but both have no effect and dont recognise my phone. i will add that the version of ics that is currently out leaked. is very smooth, unfortunately bluetooth pairing doesnt work properly and wifi is a bit weak, but theres a fix for that.
i have tried flashing a cwm but to no succes. i do know some things in android flashing and repairs, but admittidly not everything so im not a complete noob.
id very much apreciate it if anyone could help me.
youll have to excuse any typing mistakes. the resolution on the tv isnt that great from a laptop hdmi out. sorry guys.
but yes any help is much appreciated.
thanks in advance guys
ricky
Click to expand...
Click to collapse
read this carefully then your phone will work again for sure!
http://www.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
and this one
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
pidocchio said:
well, windows MUST recognize the o2x as an apx device since you would use the tegra apx applications processors...
you are saying that windows sees your o2x as an apx device but nv/smart-flash don't?
Click to expand...
Click to collapse
Unfortunately thats exactly whats happening. Any suggestions ? Ive just seen the comment below this.bive tried something similar tobthat. But not that. Ill try that first thing tomorrow when i wake up. thanks for a quick reply.
ferimond said:
read this carefully .... Im not alliwed to pot links yet? Sorry
Thanks for this suggestion ibwill give it another go over tomorrow and let you guys know how it went. Although ive tried something similar to this but didnt succeed. But ill test it. I made a back up of gb 2.3.4 its on my laptop. Just need to copy it over to sd when its restored or got cwm on it.
Click to expand...
Click to collapse
rdr1991 said:
ferimond said:
read this carefully .... Im not alliwed to pot links yet? Sorry
Thanks for this suggestion ibwill give it another go over tomorrow and let you guys know how it went. Although ive tried something similar to this but didnt succeed. But ill test it. I made a back up of gb 2.3.4 its on my laptop. Just need to copy it over to sd when its restored or got cwm on it.
Click to expand...
Click to collapse
Nvflash should do the trick. Follow the instructions carefully and you'll be back up in no time.
Click to expand...
Click to collapse
I'd like to thank you guys for your help and petienitce, i belive i have got it working again, just flashing recovery 10b. ill see how it goes and ill post agan when updated.
again thankyou very much guys. you guys at xda are great
Ricky
how long did it take for u to nvflash the batch file ?
Mine seems to be stuck at system.img
Thanks
ferimond said:
read this carefully then your phone will work again for sure!
xxxxx
and this one
xxxxx
Thank you ferimond. Looks like I can use some lessons on how to search this forum.
Click to expand...
Click to collapse
Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app