For everyone who has an error with a2sd / s2e / link2sd like :
- when install apps then the phone restarts
- can't download from market which says "Cannot download xxx due to an error"
I suggest u to use UNGAZE script, it is similar to a2sd and others.
the ungaze script will mount the sd-ext as the data partition so it will make ur internal memory bigger. we know that it will make our phone a bit slow but it is better than we use corrupted a2sd and etc then have to reflash the rom and wipe all the data.
From my experience it won't make my mini slower. the respond time to open something only takes 1 second longer than a2sd etc.
REQUIREMENTS :
- an android phone, of course (GALAXY MINI)
- a stock/custom rom which had been rooted and busybox-ed
- a stock/custom rom which free from a2sd,s2e,link2sd etc.
> if you already installed one of them, wipe data and reflash your rom
INSTALLATION :
1. Partitoning the sdcard
- backup all important data (eg. Titanium Backup files)
- go to cwm recovery > advanced > partition sdcard
skip above step if you already partitioned the sdcard
2. Download the Ungaze_v4b5.zip
3. place on sdcard (don't extract it)
4. go to recovery mode
5. mount system,data,cache,sdcard,sd-ext
6. flash the ungaze
7. reboot
- go to settings > storage, and if ur internal memory increase, it means .....
- dont forget to set the default installation of apps to internal , setting > cm setting > application
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TROUBLESHOOTING :
1. if there is a problem with ungaze like :
- when boot up / reboot the phone, the rom back to default (everything is default) it means the sdcard is not mounted properly by the ungaze.
to check the problem, go to recovery then mount sdcard and sd-ext, if it can't be mounted, yes there is a problem
to solve it :
while in recovery mode
- release the sdcard snd put it back
- try to mount sdcard and sd-ext
if problem exists :
- release the battery
- release the sdcard and mount it on pc using cardreader etc.
- put back sdcard
- reboot to recovery
- try to mount sdcard and sd-ext
- if it is mounted succesfully then reboot your phone
2. WiFi MAC Address always changed (thanks to denzel)
For all that want use ungaze script but mac address change every connection.
Here the solution:
Problem is the absence in this case of this file: .nvmac.info in /data -->
Important file to read after searches, about that file, with root explorer is this: wlan_mac in /system/bin/
Read this file and you can found a good solution. This part:
Code:
Code:
if ! ls /data/.nvmac.info; then
while true; do
case `getprop ril.wifi_macaddr` in
"")
# $SYSLOG "Still waiting for mac property"
sleep 1
;;
*)
break
;;
esac
done
$SYSLOG "Generate mac file" `getprop ril.wifi_macaddr`
echo `getprop ril.wifi_macaddr` > /data/.nvmac.info
fi
For some reason this code with ungaze script (data on sdext cause the problem?) dont work.
So from emulator:
getprop ril.wifi_macaddr > /data/.nvmac.info
Now, to every connection, to every boot, also with ungaze, you will have always the same original wifi mac address.
credit and thanks to ungaze and denzel
My device gone sooooo slow.... i think is because my sd is class 4
KoperKiller said:
My device gone sooooo slow.... i think is because my sd is class 4
Click to expand...
Click to collapse
i use sd card class 4 too.
but i have no problem with ungaze...
sent from Nokia 3310
im using s2e n just got "Cannot download xxx due to an error". but after turn 0ff phone n goto recovery mode >>mount sdcard n sdext again >>reboot system n the Prob solved
Hmm... gonna try this script, hope never got that prob anymore
how to use it with stock rom ?
thanks
s2e is cm7 only, so i dont think that he are using stock rom
Bu!
Best method Thanks a lot
Thanx for this amazing post!...I am able to download market content now!..but my internel memory is low as compared to using s2e( I mean after restoring all my apps and data)..
Usually using s2e I got 160+ MB left..but using this I only get 118Mb?...any idea?..
One more thing does this script moves "app data to sd-ext" !
galaxy fit + CM7.2 (2.3.7) + 801Mhz
neil.richard said:
Thanx for this amazing post!...I am able to download market content now!..but my internel memory is low as compared to using s2e( I mean after restoring all my apps and data)..
Usually using s2e I got 160+ MB left..but using this I only get 118Mb?...any idea?..
One more thing does this script moves "app data to sd-ext" !
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
This is bcoz with s2e u can move dalvik cache to sd ext and using this u cant
Sent from my GT-S5570 using Tapatalk
raj3534 said:
This is bcoz with s2e u can move dalvik cache to sd ext and using this u cant
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Oh!...so any idea if I can use this script as well as move the dalvik cache to sd-ext?
galaxy fit + CM7.2 (2.3.7) + 801Mhz
will swap work with this script??? by setting swappiness in cm7 settings i mean with a swap partition created
my sd card file are not getting shown....!! Does it mean i have lost my data
I have used ungaze script before, is this the new and updated ungaze script or its as it was before?
hmmm... will try this at home...
excuse me, what if my rom (emanon v4) have default app2sd (s2e) in it
can i still use this?
droidface said:
excuse me, what if my rom (emanon v4) have default app2sd (s2e) in it
can i still use this?
Click to expand...
Click to collapse
Yes, you can... but why all these hassle?
S2E is much better and easier than this ungaze script so just use it and stay happy
yagya said:
Yes, you can... but why all these hassle?
S2E is much better and easier than this ungaze script so just use it and stay happy
Click to expand...
Click to collapse
yeah you're true master
but i've got many force close and my phone often shutdown by itself
Error mounting SDCard/SD-text
My wifi does not work anymore, I've done says the post but did not solve. any idea?
Sent from my GT-S5670 using xda premium
Omg its cool. No more widgets in phone memory. Wyyyyy
Sent from my GT-S5570 using xda premium
Related
hey guys im making this thread cus androidboss dint know how to do this and im mkaing it easier for him(might help others too so )
I AM NOT RESPONSIBLE FOR ANY DEAD SDCRADS PHONES LAPTOPS DESKTOPS AND ANYTHING ELSE
requirements
-windows computer
-phone with swiftdroid or any rom that supports inti.d boot scripts
-recovery 5.0.2.3
1. backup all sdcard stuff to computer.
2. wipe all data from the sdcard. after that use this to remove all partitions from sdcard( if you do not have any other partitions on sdcard skip to the end bellow the last picture)
http://www.partition-tool.com/personal.htm
the pics will look may look different cus im using a older version
mine looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to remove all the other partitions
when all is done click apply at the top lefthand corner. at the end after it refreshes make sure there is only one partition left . the FAT32 partition.
so now the card has no data put it in the phone and boot into recovery(5.0.2.3). there go to advance>partition sdcard>EXT size 2M(2M if you dont want a ext partition but if you want then the size is up to you )>swap size 256m
power down the phone and put back data into the sdcard. now enjoy swap
well this is my first thread so hope it helps!!
hahaha thank you
every much bs828 !!!
You helped me a lot!!!
Thanks a lot mate.
Edit: will use this on my girls gt540.
These typos was sent from my Nexus S [I9023]
custom rom??
I use this method more than 2 or 3 month, thats nothing new. Mur4ik Swiftdroid roms use this method, automatically find&use SD card's swap partition.
Before that, i made a video for my 2.1 Ultimate rom, how to partition SD card under windows to use swap&ext partition. (I use swapper for swap and joe's autoapp2SD in my ROM) Sometimes it not possible because compatibility problems between win&card readers but newer CWM recoveries able to partition cards.
yeah like i said androidboss did not know how to do this so i made this. others may also find is useful so why not make it public ??
bs828 said:
yeah like i said androidboss did not know how to do this so i made this. others may also find is useful so why not make it public ??
Click to expand...
Click to collapse
hahaha!!!
yeah thanks !!!
i tried it today and it works fine!!!
should be useful if we we ever get ICS
hi, tnx for guide... folowing it i found out that me sdcard was formated like super floppy, maybe that was cose of sdcard unmounting.
LoL hope it helped
Just tried it, works like a charm
Im quite a newbie in this, how exactly does swap and ext porticions work and what do they do ?
the memory card you are using is in a fat32 format so by partition it to let say a ext3 file type you can store apps on it(if im not wrong the phone's memory is also ext3) swap works as addition external ram used to run apps
Where can I find recovery 5.0.2.3?
Sent from my GT540 using Tapatalk
jasper580 said:
Where can I find recovery 5.0.2.3?
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
lavero burgos' mediafire-folder
http://www.mediafire.com/?dc647azbpozp2#vhlcnb75m7yq7
always the first thing for me if i need something ;D
bs828 said:
the memory card you are using is in a fat32 format so by partition it to let say a ext3 file type you can store apps on it(if im not wrong the phone's memory is also ext3) swap works as addition external ram used to run apps
Click to expand...
Click to collapse
thats true except the phones memory is yaffs2
I'm running CM9 Android 4.0.3
http://mikegapinski.androidus.pl/android-4-0-ice-cream-sandwich-aosp/
I've done everything like the tutorial says, but I had older clockwork recovery 2.5 I guess something like that, and I've done the same thing in recovery selected advance>partition sdcard> EXT3 and selected 2gb then selected 256MB Swap, but when I run the OS and enter free in terminal it says swap 0.
What could have caused the problem?
Thanks in advance!
vita94 said:
I'm running CM9 Android 4.0.3
http://mikegapinski.androidus.pl/android-4-0-ice-cream-sandwich-aosp/
I've done everything like the tutorial says, but I had older clockwork recovery 2.5 I guess something like that, and I've done the same thing in recovery selected advance>partition sdcard> EXT3 and selected 2gb then selected 256MB Swap, but when I run the OS and enter free in terminal it says swap 0.
What could have caused the problem?
Thanks in advance!
Click to expand...
Click to collapse
look in root explorer (or any root file manager), in folder etc/init.d
if there isnt script called 07swapon, the swap wont active. and afaik, mike's ics doesnt have this script. u must add it manually.
Yes take 1 from any rom
How can I open *.img files so I can get the 07swapon file?
Can you give me the download link for swapon file?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Ace - Fit - Gio - Mini -
-----------------------------------------------------------------------------------------------------------------
PERFORMANCE PACKAGE
SOFTKEYS MOD
A2SDXhttp://forum.xda-developers.com/showpost.php?p=29407740&postcount=4
SWAP
-----------------------------------------------------------------------------------------------------------------
Credits : Team JELLAXY
http://www.jellaxy.com/
Softkeys
Performance package
V6 Super Charger makes your phone super snappy, fast with better multitasking management. It rearranges and fixes Out Of Memory (OOM) Groupings, Priorities and LowMemoryKiller values to make your low RAM device fast, by freeing memory when possible.
UPDATES
CM10 (Update 1/10)
CM10 Performance package V10 available for nightly 20120929
CM9 (Update 25/09)
CM9 Performance package V1 available for build 9.1.0-GT (UPDATE 16:45 R1)
AOKP (Update 1/10)
AOKP build 3 Performance package Performance package V3 available(UPDATE 16:45 R1)
What the complete package wants to achieve :
- Entering your PIN with minimal/no delay/lag
- Minimising delay with lock screen/unlock/ calls (touchscreen response lag)
- Smoother notifications on the status bar, and smoother pulldown menu response
- Minimising lag
- Better multitasking management for low RAM devices
...
What's in the package ?
- V6 supercharger
- Framework patch for CM10 OOM grouping priorities
- Loopy smoothness (No user interaction required)
Instructions :
1. Install flashable zip in CWM which also installs script manager to user apps. (So it will be easy removable afterwards)
2. Wipe cache and dalvik cache
3. Reboot to android, open Script Manager (In the app drawer), select run as root.
4. Browse to system/xbin, select the file named ‘’V6’’, ONLY mark the crossbones tab (SU) and run the script.
5. When you are done configuring it to your liking, run the script again to see if its 100% supercharged!
ALWAYS BACKUP BEFORE FLASHING IN CASE THERE GOES SOMETHING WRONG
Download :
CM10 :
http://d-h.st/n3t
CM9 :
http://d-h.st/Qhu
AOKP JB :
http://d-h.st/nYJ
Credits : eoghan2t7 - zeppelinrox- ...
Original V6 supercharger script thread by zeppelinrox : http://forum.xda-developers.com/showthread.php?t=991276
Softkeys
Softkeys
Universal patch for softkeys, will work on any device, version.
Softkeys enabled :
http://www.mediafire.com/?gtdr5qzfp6e7pxp
Softkeys disabled :
http://www.mediafire.com/?98y36nb4xi92bxv
ALWAYS BACKUP BEFORE FLASHING IN CASE THERE GOES SOMETHING WRONG
Great, how does it look like ?
Nice huh!
A2SDX
A2SDX - DATA TO SD-EXT
(CM9 - CM10 - AOKP)
First of all : Buy a DECENT SD card with decent write speeds. It does not cost much and you wil be happy with the result!
I highly recommend using a class 10 external SD card for this to work optimally
This works perfectly in combination with SWAP in the post below. If you are planning to use SWAP also dont forget to define SWAP space while partitioning your SD!
What the hell is A2SDX and why would i install it?
A2SDX modified for jellybean, will extend your internal storage with the SD-EXT size without lags.
Attached you can find the script, use only in combination with EXT partition on you SD card!
INSTRUCTIONS
Partition your SD via CWM recovery OR via Windows. I recommend doing it via WINDOWS for optimal results!
Do note, its not needed to do this again if you already have a EXT partition. You just can flash the attached zip then.
- VIA CWM RECOVERY:
REMOVE ANY OTHER SCRIPT FOR APPS 2 SD
1. Backup the contents of your SD card
1. Partition EXT3 with the partition option in cwm recovery (beware, this will erase your SD card, save important stuff to your computer and copy it back afterwards).
- For EXT4 use minitool partition wizard on your computer, its free.
- I recommend at least 500mb partition. Swap size is optional, if you want to use the swap script posted below 128mb should be enough.
2. Flash attached zip
3. Boot to android.
4. Reboot twice to let the script settle
5. Return backed up data to your SD card.
- VIA WINDOWS:
REMOVE ANY OTHER SCRIPT FOR APPS 2 SD
1. Back up the contents of your SD card.
2. Download MiniTool Partition Wizard Home Edition (FREE)
3. Remove external sd card from phone and connect to a pc using an adapter or sd card slot. (!DO NOT DO IT TROUGH YOUR PHONE!)
4. Right click your sd card in mini tools and delete existing partition.
6. Right click again and create a new fat32 primary partition, choose the desired size. (Dont forget you need some size left for the SWAP and/or the A2SDX partition)
7. Click apply.
8. Create a swap partition and/or A2SDX partition in your unallocated space by right clicking and choosing primary linux swap (SWAP) and/or primary EXT4 (A2SDX). A swap partition of 128mb should be enough.
9. Click apply.
10. Return backed up data to your SD card.
11. Flash attached zip
12. Boot to android.
13. Reboot twice to let the script settle
For more info check : http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Yeah Yeah, I installed it already. How do i know if it works ?
Check your internal storage in android and be surprised.
525MB !!?? OMG!
Do note, this is NOT my work, i just packed it up as flashable zip. All credits go to AMARULLZ, Lennox and all other people that added their contributions to the script.
SWAP
SWAP
(CM9 - CM10 - AOKP)
First of all : Buy a DECENT SD card with decent write speeds. It does not cost much and you wil be happy with the result!
I highly recommend using a class 10 external SD card for this to work optimally
What the hell is SWAP and why would i install it?
Well... swap space is a partition that will be created on your SD card on which the users inactive will be moved.This will free up physical ram for the OS and the active applications.
This works in perfect harmony with the A2SDX script.
Cool now give me the link, give me, give me!
Calm down, first you need to make sure you even have a swap partition on your SD card!
Just like the a2sd script you will need to partition your SD card, doing this in CWM recovery will give you the option to choose SWAP space size and SD-EXT apce size.
The script is attached to this post.
INSTRUCTIONS
Partition your SD via CWM recovery OR via Windows. I recommend doing it via WINDOWS for optimal results!
Do note, its not needed to do this again if you already have a SWAP partition. You just can flash the attached zip then.
- VIA CWM RECOVERY:
1. Backup the contents of your SD card
2. Partition EXT3 with the partition option in cwm recovery (beware, this will erase your SD card, save important stuff to your computer and copy it back afterwards).
- For EXT4 use minitool partition wizard on your computer, its free.
- I recommend at least 500mb partition.
3. Choose SWAP size. A swap partition of 128mb should be enough.
4. Flash attached zip
5. Boot to android.
6. Reboot twice to let the script settle
7. Return backed up data to your SD card.
- VIA WINDOWS:
1. Back up the contents of your SD card.
2. Download MiniTool Partition Wizard Home Edition (FREE)
3. Remove external sd card from phone and connect to a pc using an adapter or sd card slot. (!DO NOT DO IT TROUGH YOUR PHONE!)
4. Right click your sd card in mini tools and delete existing partition.
6. Right click again and create a new fat32 primary partition, choose the desired size. (Dont forget you need some size left for the SWAP and/or the A2SDX partition) A swap partition of 128mb should be enough.
7. Click apply.
8. Create a swap partition and/or A2SDX partition in your unallocated space by right clicking and choosing primary linux swap (SWAP) and/or primary EXT4 (A2SDX).
9. Click apply.
10. Return backed up data to your SD card.
11. Flash attached zip
12. Boot to android.
13. Reboot twice to let the script settle
For more info check : http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Yeah Yeah, I installed it already. How do i know if it works ?
Go to terminal in android (If you dont have it, ionstall it from the market) and type : free
Check the line after SWAP, If there are values there like the picture below then SWAP is enabled and working fine.
If it looks like the picture below (with zeros in the swap line), you do not have swap.
Do note, the script is NOT my work, i just took the correct files together and packed it up as flashable zip. All credits go to all the people that contributed to the script.
Great work, is the soft button script fixed?
Sent from my GT-S5570 using xda premium
elixdragon said:
Great work, is the soft button script fixed?
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Am uploading now
New links for softkeys are up, please test and report
thanks for the soft keys...but i think it would be better if they are placed on the notification bar...rather than separate...it makes our screen small...
like this is better,i think...i hope it is possible..
Sent from my GT-S5570
Can u make a horizontal lock screen mod ?
Hey, long pressing the home(middle button) OR Slide directly upwards from any soft button I got this »
Yeah its google now
Sent from my Galaxy Nexus using xda premium
Small_town_boy said:
thanks for the soft keys...but i think it would be better if they are placed on the notification bar...rather than separate...it makes our screen small...
like this is better,i think...i hope it is possible..
Sent from my GT-S5570
Click to expand...
Click to collapse
ya totally agree...our screen is too small to have separate statusbar and nav.bar ! :/
if its possible to integrate softbuttons into statusbar, plz do it
gud luck...and thanx..
michie said:
Yeah its google now
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
is it working?
awesome
and one thing
imho, the soft button is better in the bottom of our screen
because if it's in the top
it looks ugly
jusy my opinion
droidface said:
is it working?
awesome
and one thing
imho, the soft button is better in the bottom of our screen
because if it's in the top
it looks ugly
jusy my opinion
Click to expand...
Click to collapse
+1 better at the bottom
Sent from my GT-S5570 using xda premium
I think that navigation bar at bottom as google nexus is better than softkeys in a statusbar..
Imho ..dev can think at option in a settings for enable/disable it
Inviato dal mio GT-S5570 con Tapatalk 2
autoradio78 said:
I think that navigation bar at bottom as google nexus is better than softkeys in a statusbar..
Imho ..dev can think at option in a settings for enable/disable it
Inviato dal mio GT-S5570 con Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my GT-S5570 using xda premium
What's the point for soft keys on such a small resolution anyway? Use hardware buttons, lol.
my hard buttons are old and barely work
Sent from my GT-S5570 using xda premium
TheWhisp said:
What's the point for soft keys on such a small resolution anyway? Use hardware buttons, lol.
Click to expand...
Click to collapse
It is my opinion sir..I prefer a little display with super fast imput (press a software button is not equal at press hardware buttons)..
If I can give you one advice..
you could implement two options:
- enable\disable nav buttons;
- settings for set dimension of buttons (as cyanmobile...the concept is different..but makes the idea)
Sorry for my english.
Hey guys.I rewrote Cronmod script to work with our ace i without gps problem or applications get forced to close.
CronMod Original thread : [SCRIPTS]CronMod-A2SD/D2EXT/INT2EXT (updated 09/19)
What it does :
It moves data/app data/local and data/dalvik-cache to sd-ext.
Data/data is moved in Data2ext version.Other files are still in internal memory.
It binds data to /internal so you can acces to app, dalvik-cache, local and data/data which are in internal memory.
Attention: It does not move the whole data to sd-ext because gps won't work.
In settings you'll see your internal memory instead of sd-ext memory.
Data2Sd-ext (Gps may not work)
Data2sd-ext by AMARULLZ mounts the sd-ext in /data and the internal memory in /sd-ext and creates some links to the folders or files which have to be in internal memory.It's fast and you can see your sd-ext memory space instead of the internal memory space.
The gps may or may not work I recommend testing gps before installing your apps.If it doesn't work do a factory reset and retest if it still doesn't work then change the script.
What you need:
A rom with ini.d support.
How to install:
Before doing anything backup your IMEI with Galaxy Toolbox App in case something happens to /efs partition.
1-Backup your apps/ contacts / data with titanium backup
2- Go to recovery
3-Make a backup in Backup and restore
4-Format /data /sd-ext /system
5-Mount /system
5-Flash your custom rom.
6-Remount /system
7-Flash your desired script.
8-Reboot
Changelog:
12/04/2013
All the scripts are updated.
07/12/2012
More stability with cronmod scripts
Cronmod Data2ext Revised 08/12.
12/11/2012
Added Data2sd-ext by AMARULLZ
29/10/2012
Small corrections in the script.
While installing, the script deletes automatically 03mountsd 11link2sd remount_fullext4 and ext4_lagfix.If you installed link2sd and applications are not showing anymore just reinstall this update.
10/26/2012
The installation now deletes 03mountdl and 11link2sd to avoid conflicts.
Script now adds applications which are in internal to ext every boot because sometimes we can find new apk files in internal/app.
Credits:
Croniccorey For CronMod
AMARULLZ for Data2sd-ext
Me
Latest versions Download:
CronMod Unofficial.zip
This version moves Apps Dalvik-cache and local to ext.
CronMod Unofficial+Data2ext.zip
This version moves Apps Dalvik-cache local system and data to ext. => More free internal memory but speed may decrease.
Data2sd-ext.zip
LINK UPDATED :To update backup your apps/ contacts etc do a factory reset be sure that formats sd-ext then install
Flash Player
This will only work if you are using one of the scripts.
Attached files are the old versions of the scripts.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMEI?
Hi,
thank you.
I'll check this.
And what about IMEI? Because the original script makes my IMEI dissapear.
(my english sucks, sorry)
One more question (and very important): Sure this script is for s5830i/m/c ?
zote2 said:
Hi,
thank you.
I'll check this.
And what about IMEI? Because the original script makes my IMEI dissapear.
(my english sucks, sorry)
One more question (and very important): Sure this script is for s5830i/m/c ?
Click to expand...
Click to collapse
did you manage to get back your IMEI number?
I use this script and I haven't lost my imei.
I have gt-s5830M with razodroid and latest kernel
Sent from my GT-S5830i using xda app-developers app
zote2 said:
Hi,
thank you.
I'll check this.
And what about IMEI? Because the original script makes my IMEI dissapear.
(my english sucks, sorry)
One more question (and very important): Sure this script is for s5830i/m/c ?
Click to expand...
Click to collapse
Styrke said:
I use this script and I haven't lost my imei.
I have gt-s5830M with razodroid and latest kernel
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
do you know how to restore my IMEI..?
By searching in google, I think you need a Riff box or Z3x box to repair imei or just get it back to samsung
installed and works as described, i now have room to install stuff!!!
I'm glad that you are satisfied with the script.
doesnt work for me. bootloop. i resettet my phone and try again but loop again
I will try it on MindCr Rom.
Checked MindCr Rom and the script is working No bootloop.
Do you use applications like Link2sd ? Check with root explorer /system/etc/init.d if there is a script that mounts the ext partition.
If i lost my IMEI will this be a proplem ?
Sent from my GT-S5830i using xda premium
I don't think you'll loose your imei with this script.It was AMARULLZ DATA TO SD-EXT script that corrupted peoples'phone efs partition.
But make IMEI backup with this app Galaxy Toolbox for S5830 i/C/M/ and a cmw backup to restore if you got bootloop.
whisper_ said:
If i lost my IMEI will this be a proplem ?
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
A phone with a lost IMEI is not authenticated to your carrier. So, no 2G/3G networks
Worked great for me...
and my IMEI is still there
thanks a lot dude!!:good::good:
GPS
just one question...does the gps work with all data in sd-ext???
dude i tried this mod i thought u said i will get more free memory but
no when i used it i didnt get any thing every thing still usually nothing different
i found the new tweak but no changes
can u help ?
just one question...does the gps work with all data in sd-ext???
Click to expand...
Click to collapse
Gps folder is still in internal memory.If its linked to sd-ext gps won't work.
dude i tried this mod i thought u said i will get more free memory but
no when i used it i didnt get any thing every thing still usually nothing different
i found the new tweak but no changes
can u help ?
Click to expand...
Click to collapse
If the script works /data/app and /data/dalvik-cache should be linked to sd-ext.
Open Root explorer and go to /data/app you have to see your installed apps and your used / free space in sd-ext.If you see internal memory instead of the sd-ext memory then something is wrong.
varund7726 said:
just one question...does the gps work with all data in sd-ext???
Click to expand...
Click to collapse
i used this one..
CronMod Unofficial+Data2ext+By Styrke.zip
This version moves Apps Dalvik-cache local and data to ext. => More free internal memory but speed may decrease.
Click to expand...
Click to collapse
and it is as the OP says...GPS works fine, and everything moved to the correct folders/structure.
i have sgm running on jellybread rom(http://forum.xda-developers.com/showthread.php?t=2106187). according to the instructions"
- dont use apps2sd! (like s2e, darktremor, etc.). if you want to move app to sd-ext..
go to Settings > Apps > Manage application > tap the application you want to move >
Move to sd-ext" however when i did that it said not enough storage available
( i have ext 3, 1 gb partition) when i went to storage settings it said under sd-ext unavailable
i did a nandroid backup and then flashed the jba2sdx script now internal memory shows 1gb and sd ext shows 178 mb.
can i keep it like this? why (earlier) was sd ext not showing?
thanks!
btw is there any way to find out if this rom has init.d support?
now your sd ext is your internal and there's no problem if you are not having issues you can freely keep it
dheeraj (dhlalit11) said:
now your sd ext is your internal and there's no problem if you are not having issues you can freely keep it
Click to expand...
Click to collapse
well its working without any lag or anything no errors (yet). but do i have to keep apps in internal memory only?
currently in storage option, there a the folowing:
SD CARD
total space-13.8gb
available space- 4.64 gb(thts all my stuff)
SD-ext
total space-178 mb
available-130 mb
INTERNAL STORAGE
tottal space- 0.94gb
available space-4.04mb (this was after just 19 apps)
that's why im asking how to clear that internal memory? when i go to manage applications there are options move to sd-ext and move to sd card.
what should i do?
I think your internal memory is still 178mb and system is thinking that sd-ext is internal (but it's not)
i would say system is reporting wrong info
ok in terminal type busybox df and paste the result here
dheeraj (dhlalit11) said:
I think your internal memory is still 178mb and system is thinking that sd-ext is internal (but it's not)
i would say system is reporting wrong info
ok in terminal type busybox df and paste the result here
Click to expand...
Click to collapse
first i typed su and after granting superuser typed busybox df. the outcome:
Filesystem 1K-bl
ocks used available U
se% Mounted on
tmfps 14
3048 32 143016
0%/dev
tmfps 14
3048 0 143048
0% /mnt/asec
tmfps 14
3048 0 143048
0% /mnt/obb
/dev/block/stl12 21
1400 188996 22404
89%/system
/dev/block/stl13 18
2672 49760 132912
27%/sd-ext
/dev/block/stl14 2
5436 4148 21288
16%/cache
/dev/block/mmcblk0p2 98
3828 979704 41241
00%/data
/dev/block/stl13 18
2672 49760 132912
27%/cache/download
/dev/block/vold/179:1
1454
4360 9676336 4868024
67%/mnt/sdcard
/dev/block/vold/179:1
1454
4360 9676336 4868024
67%/mnt/secure/asec
#
that's it.
PS when i go to internal storage most of the apps are b/w 50-30 mb each(which is quite large) some are lesser such as root explorer and stuff
thanks!
the output is not clear I can't get the info
ok type only df without busybox
dheeraj (dhlalit11) said:
the output is not clear I can't get the info
ok type only df without busybox
Click to expand...
Click to collapse
i have taken all the relevant screenshot before and after flashing jba2sd
but how to attach them? i cant attach thorugh link since i dont have dropbox and stuff...
spam bot said:
i have taken all the relevant screenshot before and after flashing jba2sd
but how to attach them? i cant attach thorugh link since i dont have dropbox and stuff...
Click to expand...
Click to collapse
You can copy paste the results from terminal emulator
Press the thanks button
Sent from my Nexus⁴
Razor! said:
You can copy paste the results from terminal emulator
Press the thanks button
Sent from my Nexus⁴
Click to expand...
Click to collapse
i visit xda through my pc not my phone.
http://forum.xda-developers.com/showthread.php?t=1292815
like how thumbnails have been attached here; how to do that?
upload them anywhere
then gype here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
next post
next post
dheeraj (dhlalit11) said:
upload them anywhere
then gype here
Click to expand...
Click to collapse
FINALLY!!!!!
the terminal data shows that your sd-ext is used only 27% which means you have around 700mb free don't know why it is showing less memory
dheeraj (dhlalit11) said:
the terminal data shows that your sd-ext is used only 27% which means you have around 700mb free don't know why it is showing less memory
Click to expand...
Click to collapse
uh...firstly that's coz i removed all those app (i did the nandroid backup to get the screenshots before jba2sd)
and im not sure if im explaining what i need properly....what i mean is that when apps are stored on internal memory they take up a lot of space...minimum 10mb (these are the small apps) and some of these start taking even 80 mb and stuff.....since i am using the jba2sdx script can i use the move to sd card option in manage applications or it will cause lag and stuff.?
and secondly why does sd ext show unavailable before flshing and after flahing becomes 178mb?
maybe jba2sdx script interchange your internal with sd-ext
you can try that option
just don't use much apps
Alright, so I've rooted and flashed CWM but when doing backups in
Nandroid and Titanium both stored in on my internal memory, while I want it on my SD card.
SD card: 32GB, FAT32(one partition), tried to make two FAT32 partitions but the second was not detected by both Windows pc and phone.
Phone sees my internal storage as "sdcard0" while it sees my sd card as "extSDCard"
1)Should I use App2SD(they changed it's name to App MIGR) or Link2SD to move apps to SD?
I've got most things covered for Link2SD but I still don't understand the init.d support; http://forum.xda-developers.com/showthread.php?t=2087497
2)While the Nandroid backup is pretty much organised, Titanium backup has like dozens of files, which am I supposed to choose if I wanted to restore my Titanium backup ?( I did the Backup new user+system apps & newer versions batch only.)(Nandroid didn't even detect my SD card while backing up.)
In cwm choose "backup and restore" / "backup to external sdcard" and your backups will be put in clockworkmod-folder on external sd.
For titanium backup you have to set location for backups to be on your external.
Have a look in titanium settings to change the default path.
I use derectorybind to bind the whole android folder to external.
Works great!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Both faria and benzrom (including drom) have init.d support. Just follow the guide to setup ext4 partition and Linux swap partition and link2sd should run fine.
Sent from the dark side on my GT-I8190
iKlutz said:
Both faria and benzrom (including drom) have init.d support. Just follow the guide to setup ext4 partition and Linux swap partition and link2sd should run fine.
Sent from the dark side on my GT-I8190
Click to expand...
Click to collapse
Init.d support can be done on every rom.
Universal init.d
tys0n said:
In cwm choose "backup and restore" / "backup to external sdcard" and your backups will be put in clockworkmod-folder on external sd.
For titanium backup you have to set location for backups to be on your external.
Have a look in titanium settings to change the default path.
I use derectorybind to bind the whole android folder to external.
Works great!
Click to expand...
Click to collapse
Got both external options to work for now.
Did u mean u bind the whole RAM or just the internal storage. Does it warn you when some apps i.e. widgets can't be moved(before it's broken) or doesn't it have that limit like Link2SD ? (Am still hestitating to use it;
-App2SD has this note:"Move apps function may not work on your devcie as manufacture removes the function of moving apps to SD from Android system" don't know whether we have that.
-Link2SD has sort of difficult requirements before install.
-DirectoryBind; Because many issues where posted by members.
Mystique03 said:
Got both external options to work for now.
Did u mean u bind the whole RAM or just the internal storage. Does it warn you when some apps i.e. widgets can't be moved(before it's broken) or doesn't it have that limit like Link2SD ? (Am still hestitating to use it;
-App2SD has this note:"Move apps function may not work on your devcie as manufacture removes the function of moving apps to SD from Android system" don't know whether we have that.
-Link2SD has sort of difficult requirements before install.
-DirectoryBind; Because many issues where posted by members.
Click to expand...
Click to collapse
Directorybind has nothing to do with ram. You just symlink appdata from "/sdcard/android" to your external to get more internal space
Never had any problems with it and im using it on three different devices.
tys0n said:
Directorybind has nothing to do with ram. You just symlink appdata from "/sdcard/android" to your external to get more internal space
Never had any problems with it and im using it on three different devices.
Click to expand...
Click to collapse
Got confused; I meant system ROM, since I just saw ~260MB left, but I suppose I made a mistake cause the system saves data to my internal storage too, am I right... o.0 ?
What are the differences between DirectoryBind, App MGR and Link2SD anyways?
iKlutz said:
Both faria and benzrom (including drom) have init.d support. Just follow the guide to setup ext4 partition and Linux swap partition and link2sd should run fine.
Sent from the dark side on my GT-I8190
Click to expand...
Click to collapse
How much space for;
FAT32 partition
Ext4 partition
Swap partition
and why on a 32GB SD card, the values.
The fat32 can be any size, this is your normal sd card data that you can use on your pc (music, videos, pics etc).
Ext4 should be however many apps sizes you want. Like if you have a lot of play store downloaded then set this as big as you think you need but save some space for linux swap.
Linux swap should be minimum 300mb (according to the guide), this is like a bit of extra ram incase your system ram gets full. Mine works fine with 800mb.
If you're looking for an example of what you could set, here :
Fat32 : 15gb
Ext4 : 15gb
Linux swap : 1gb
They could work fine is not very complicated unless I'm wrong. Study the guide well and read other people's posts on there too.
Sent from the dark side on my GT-I8190
---------- Post added at 06:08 PM ---------- Previous post was at 06:07 PM ----------
This is assuming you have 32gb sd card.
Sent from the dark side on my GT-I8190
Mystique03 said:
Got confused; I meant system ROM, since I just saw ~260MB left, but I suppose I made a mistake cause the system saves data to my internal storage too, am I right... o.0 ?
What are the differences between DirectoryBind, App MGR and Link2SD anyways?
How much space for;
FAT32 partition
Ext4 partition
Swap partition
and why on a 32GB SD card, the values.
Click to expand...
Click to collapse
Yes 260mb is left on your system partition.
Installed apps goes to "/data" = internal storage.
Does our phone/kernel support Ext4 ?
http://forum.xda-developers.com/showthread.php?t=2030282
Mystique03 said:
Does our phone/kernel support Ext4 ?
http://forum.xda-developers.com/showthread.php?t=2030282
Click to expand...
Click to collapse
sure it does....if u succeed in installing the Link2Sd the first option is to select ext 2,ext 3 or ext 4 to link it.....this might help on the init.d support...pretty easy actually...
http://forum.xda-developers.com/showthread.php?t=1933849
Mystique03 said:
1)Should I use App2SD(they changed it's name to App MIGR) or Link2SD to move apps to SD?
I've got most things covered for Link2SD but I still don't understand the init.d support; http://forum.xda-developers.com/showthread.php?t=2087497)
Click to expand...
Click to collapse
I paid for Link2SD Pro but I've had some problems with it. When I contact the developer, Bulant, he sometimes responds but other times I get no reply.
Have you tried using both? What do you think of AppMgr? What about Link2SD?