Hello, I own a galaxy tab 7" latin american version for a couple months, everything was running good, stock rom/rooted.
2 weeks ago it stopped reading any sim card, I tried to fix that problem by going back to unrooted with superoneclick, and I ended up fudging everything instead.
The problem is:
Im stuck at the "(Phone)....!...(PC)" screen, and it's blinking, I've already downloaded ODIN tool and Heimdall's Oneclick Unbrick tool.
This is the screen I'm getting
Which none of those I've succeded unbricking the tab.
Please help me, what can I do?
Please help!
Try using odin, to flash this rom
P1000N: http://www.multiupload.com/EUZS7V21L6.
P1000L: http://www.multiupload.com/SZZZFK8GMO
PIT file: http://www.multiupload.com/ZL9HDOGI5V
Repartition checked.
After flashing the correct rom enter to download mode again and flash this http://www.multiupload.com/E0CQPPZCMN in odin without pit file and repartition unchecked, do a wipe cache and dalvik. then restart to system.
I softbricked my tab some couple times and this metod always works for me. (P1000N)
Thanks for the stock rom Rafa, the thing is, ODIN doesnt recognize the tab, when I plug it to the wall charger, it turns on the brick screen, and it is blinking.
Thats the part that really worries me, the blinking part...
When I plug again the tab to the computer, it doesnt turn on the same screen
EdWRX said:
Thanks for the stock rom Rafa, the thing is, ODIN doesnt recognize the tab, when I plug it to the wall charger, it turns on the brick screen, and it is blinking.
Thats the part that really worries me, the blinking part...
When I plug again the tab to the computer, it doesnt turn on the same screen
Click to expand...
Click to collapse
I've once had my tab was showing a error triangle with connection problem from tab to pc -so i've thought "rigth just gonna flash it like i've done so many times".
When i've connected the tab to my pc odin didn't recognise it either. Though i've just selected my pit tar and so on and flashed it anyway, that little blue bar showed up on the tablets screen, and then it was flashing.
Try see if you're able to pull of the same.
Cheers, jakk212
But the COM port did recognize the tab??
Hello,
I have the same problem... did you find already a solution?
Thanks!
rafaeker19 said:
Try using odin, to flash this rom
After flashing the correct rom enter to download mode again and flash this in odin without pit file and repartition unchecked, do a wipe cache and dalvik. then restart to system.
I softbricked my tab some couple times and this metod always works for me. (P1000N)
Click to expand...
Click to collapse
thank you i had the same problem with my tab from claro el salvador and now is working!
anyone else has any input on this?
1-Does Windows detect the tab?, check in hardware manager, see if listed.
2-try flashing using Odin or heimdall, make sure you use the correct version of Odin , I use the 1.7 and I don't have problems.
3-if Odin detect it do the steps above.
Sent from my GT-P1000 using XDA App
Related
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
Hello, I tried to install a firmware page samfirmware.com my samsung galaxy EUR tab is P1000. installed with odin and all was fine but now the tab does not turn.
Can someone help me?
Thank you and sorry for my bad English.
Can you get into download mode? hold volume down and power.
the screen does not turn but odin detects tab
Thanks.
Connect your usb to the power socket. If battery icon appears then there is hope. It seems like a display problem for me. If it doesnt your display might have issues. Try reflashing with odin and see. Also noob question did you flash with correct firmware for your device. If it still doesnt turn on it might be a hardware issue than a software one.
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
rui_sandra said:
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
Click to expand...
Click to collapse
If odin still able to detects it, then there is hope. But this procedure will wipe your tab clean, even internal sdcard!
Now, go to here and get Roto JMI FULL ROM + P1_add_hidden.pit.
Once you've done it, put your tab into download mode by:
1. Turn off your tab without plugging it into anything;
2. Press and hold Power + Vol down till your tab is on;
3. When you see android shoving picture, it's in download mode.
Plug your tab to your pc, launch odin. If it shows up, put P1_add_hidden.pit in PIT field, Roto-JMI-Full-v2 in PDA field. Check "Re-Partition" & "Auto Reboot". And let it flash. Your tab should be able to boot up now, with root installed, and future updates will not need to go through kies.
REMEMBER: DO NOT DOWNLOAD ANY FIRMWARE FROM SAMFIRMWARE.COM AS THEY CONTAINS LOCKED BOOTLOADER! Once you get above procedure done and able to boot up, then report back, still have things to be done
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
rui_sandra said:
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
Click to expand...
Click to collapse
Dark as in you still able to see anything on the screen or it wouldn't even turn on? Cause for tab, if battery power reach 10% or lower it will remain dim(as in without backlight, but screen is still on.
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
rui_sandra said:
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
Click to expand...
Click to collapse
Start up sound working as well? I thought after repartition and flashing new firmware should make things back to life. The tab never accidentally dropped before right?
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
rui_sandra said:
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
Click to expand...
Click to collapse
Without screen, I can't really help much now. If even charging through wallplug without showing battery icon, I believe your screen is basically defective, perhaps you needs to send back to samsung for a screen replacement since it's still new
i had the same problem before and i panicked. but all i have to do was to
1-flash Roto-JMI-Full-v2 with ODIN (No PIT and No Repartition)
you will get no touch screen after doing this
2-flash the stock ROM with ODIN (with PIT and Repartition checked) again and it will work
Where can I get the stock ROM download from?
Stuck with the same problem. So downloading the Roto-JMI-Full-v2 image. But not sure where to get the stock ROM from.
For me,
I am able to get the battery on the screen when I connect the usb.
I am able to get into the downloading screen by pressing the power + vol down.
Odin detects.
Odin gives me a "Pass" when I flash with Roto-JMI-Full-v2.
But after that I still cannot get in. The Screen is stuck on the Galaxy Tab with samsung logo at the bottom.
Any help would be great since I cannot do anything with the Tab right now.
Hi people,
I have just got a Galaxy Tab just for kicks. It's a P1000L brazilian one.
I want to unbrand it (it's Claro branded, the operator took out Gmail and Gtalk, also assigned search to Yahoo instead of Google), so I have talked to a friend which also has a Galaxy Tab, same model, but unbranded, all Google apps inside.
My FW is (or was ) P1000LVJJJ4, and his FW is P1000LVJJM9, so I went to this thread at TheGalaxyTabForum, downloaded the P1000LVJJM9 FW, PIT file and ODIN 1.3.
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
I have read about the process and started doing it. Here's what happened.
I haven't checked the partition option, just put the PIT file and the FW file in the correct fields, put my Tab in download mode, clicked start... and after some time, almost at the end, ODIN failed. My Tab got stuck in download mode, yellow triangle. I got it disconnected from the USB cable, than put it again. Restarted the process, but ODIN got stuck in setup connection.
I took my Tab off the usb cable again, it was still stuck in download mode, yellow triangle. Pressed the power button for a while, it has turned off completely. Now it's bricked, maybe dead. No life signal, nothing happens when I press any button or button combination, nothing is shown when connected to the charger or USB, not recognized in KIES and ODIN, nothing at all.
Is there any hope for me? What can I do to solve this?
same problem here any help plz ?
Generally its a brick when it can't be recognized in Odin or Heimdall... This is because you can't flash anymore.... Best bet is to try a warranty repair....
Good luck...
so... anyone help me please?
was flashing with odin and went bad now i get msg firmare upgrade fail with picture of phone yellow exclamation mark and computer. i even bought a jig and still only boots to that. not sure what else i can do??
any suggestions??
The jig should do it. Sometimes that screen is download mode, even though its the soft brick picture. Try hooking it up to odin. If odin recognizes the device you should be able to flash back to stock fine.
Sent from my Captivate running Continuum 5.6
yea u should still be able to flash after jigging it. its happened to me like that b4 exact same thing
what quar said
Thanks for the quick responses, it worked and i'm back up. I tryed that days ago wonder why it worked all the sudden.
Again thanks
i have the same problem. Except when running odin it just sits at set pit file.
Tried diff odin files. diff cord and usb port
Try Heimdall. Apex ROM has files and good instructions.
Odin never worked for me.
ab30494 said:
i have the same problem. Except when running odin it just sits at set pit file.
Tried diff odin files. diff cord and usb port
Click to expand...
Click to collapse
My device stop in a bootloader. I've tryed to flash with a odin(1.85, 3.07). And nothing. It is don't go to download mode.Only with a jig. The normal mode don't works. When a plug the micro usb, appear in the lcd a incomplete freeze circle. But, one time, the cell starts and works well. I don't know what is happen...
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Tanks!!
slow--welder59 said:
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Click to expand...
Click to collapse
I'll see :laugh:
My device
i didn't solve the problem with the fix that say to me. I found in in forum, it is probable a oxidation. I'll try to fix. Anyone have a same problem?
My device is Brick
I didn't find a solution for my device. Please, help me!
What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.
My device is Brick
slow--welder59 said:
What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.
Click to expand...
Click to collapse
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...
Try this
First
Connect in download mode
Open ODIN
Re-Partition CHECKED
PIT: s1_odin_20100512.pit
PDA: I9000B_JH4_JI3_JH2_JH4_VJ_ARO.tar
Start
on finish Close ODIN and disconnect the phone
Power Off
Second
Connect in download mode
Open ODIN
Re-Partition UNCHECKED
PDA: I9000B-JV3_2_3_3_ARO.tar
on finish Close ODIN
andrewmilli said:
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...
Click to expand...
Click to collapse