[Q] Brick with my i9000b - Galaxy S I9000 Q&A, Help & Troubleshooting

My device stop in a bootloader. I've tryed to flash with a odin(1.85, 3.07). And nothing. It is don't go to download mode.Only with a jig. The normal mode don't works. When a plug the micro usb, appear in the lcd a incomplete freeze circle. But, one time, the cell starts and works well. I don't know what is happen...

have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

Tanks!!
slow--welder59 said:
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Click to expand...
Click to collapse
I'll see :laugh:

My device
i didn't solve the problem with the fix that say to me. I found in in forum, it is probable a oxidation. I'll try to fix. Anyone have a same problem?

My device is Brick
I didn't find a solution for my device. Please, help me!

What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.

My device is Brick
slow--welder59 said:
What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.
Click to expand...
Click to collapse
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...

Try this
First
Connect in download mode
Open ODIN
Re-Partition CHECKED
PIT: s1_odin_20100512.pit
PDA: I9000B_JH4_JI3_JH2_JH4_VJ_ARO.tar
Start
on finish Close ODIN and disconnect the phone
Power Off
Second
Connect in download mode
Open ODIN
Re-Partition UNCHECKED
PDA: I9000B-JV3_2_3_3_ARO.tar
on finish Close ODIN
andrewmilli said:
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...
Click to expand...
Click to collapse

Related

[Q] Stuck at logo screen....help

I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!
Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???
After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.
Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....
I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone
gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes
tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?
2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?
I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm
I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...
Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?
Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje
Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...

NEED HELP!!! Screen black!

I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App

[Q] No boot, no samsung logo, no download mode

Ok i put my device into download mode with picture then flashed my i9000 with http://forum.xda-developers.com/show....php?t=1160580
i now know this was the wrong FW for my device since then i cannot boot my phone normally nor get into download mode with the picture
it works fine just if i pull battery or turn off the phone
all i get is a black screen with "home & back buttons lit up"
however when i attach my device to odine it recognizes the phone first time
i dont have to do anything, i've tried flashing stock FW
same result black screen buttons lit up no DL mode with pic no boot
i've tried flashing FW with sbl success odine tells me,
no luck again, also when i try to flash 3 files
it always hangs then fails on modem, however if i flash allinone it works
but only boots with odine & not on its own & without samsung boot image
i can flash modem on its own via psa tab with success, i've also tried the jig to get into normal DL mode, but to no avail
also when i plug usb cable in & take out battery phone turns off
its like the usb is not a power source, ive tried on my laptop, ac adapter & pc all same result
to summerise:
i can flash my phone however if i turn off device i it will not boot
on its own & have to reflash via odine but with no boot logo only sounds
im thinking the only solution is samsung service centre but i can hazard a guess the price of a new mobo will prob be the same as the phone its self secondhand on ebay
any ideas? thanks
P.S when i flash 2 or more files i use pit 512, what if i didnt use a pit or used a different one would it make a difference?
P.P.S kies does recognize device once its flashed but cant find any updates on FW
would doing an emergency restore with an .sbu file fix this boot issue?
& where could i get an .sbu file from as i didnt do a backup
Did you also check “repartition“ in odin when you flash with the pit file?
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
In fact if you can't go into DL mode you can use a thing called JIG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Unbrickable mod will fix it.
liraindon said:
Did you also check “repartition“ in odin when you flash with the pit file?
Click to expand...
Click to collapse
odine automatically clicks re-partition when i check a pit file
ansonscleung said:
In fact if you can't go into DL mode you can use a thing called JTAG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Click to expand...
Click to collapse
is this not similar to a jig?
rax22 said:
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
Click to expand...
Click to collapse
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
stevo-p said:
is this not similar to a jig?
Click to expand...
Click to collapse
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
does anyone have a basic .sbu file with no data on that i could use with kies?
would it work?
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
You're correct, guy. A JIG cost about HK$15.5 ($15 for a Micro USB port and $0.5 resistor) (approx. US$1.99 €1.5 not incl. transportation fee) or spend US$8 here.
Hope you can pass through those stuff and enjoy back your phone!
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
already tried jig, no affect, also i cannot getinto recovery mode also
im assuming im already in download mode as odine recognizes my phone
but i have no pic on phone
Unbrickable mod will fix it.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
rax22 said:
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
Click to expand...
Click to collapse
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
woolf clubs said:
Unbrickable mod will fix it.
Click to expand...
Click to collapse
i've researched that method, i know little about soldering
and asked in a phone shop & they knew nothing about it
so i wouldn't attempt it as i would probably screw it up
stevo-p said:
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
Click to expand...
Click to collapse
also i just re-flashed with darky rom same as before "boot loop with pic & welcome to darkyrom 10.2 extreme edition" so turned off phone
thinking great i finally got a pic on boot......no
turned phone on no pic no sound black screen with buttons lit up
nothing else
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
UPDATE*
i've flashed my phone with
PIT: 512
PDA: PDA_XWJVZ_Sbl.tar
PHONE: PHONE_XXJVT.tar
CSC: CSC_OXXJV9.tar
KERNEL: Semaphore_kernel_JVT_1.8.0.tar
I now have the download mode pic so im thinking great
color is abit off but atleast i had the startup samsung logo
fantastic just turned off phone rebooted it
back to square one, black screen bottom 2 buttons lit up?
Fallen04 said:
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
yes multiple stock fw's all work until i turn off device
then try turn on black screen 2 buttons lit up

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

s3 mini does not turn on!!

Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.

Categories

Resources