I'm currently using MIUI ROM 2.3.7 (build MIUI-1.12.2)
baseband: 1035.21_20110405
kernel: 2.6.32.45-cyanogenmod ([email protected]#1)
Curently having network breakdown issue. might have a few breakdowns in a day, sometimes don't have. do i need to upgrade baseband or kernel? can anyone help me please. i'm having a lots of appointment daily as i can't have breakdowns so often.
I don't understand what you mean by breakdown? Is it complete loss of signal? If it is then this happened to me in the galnet's latest weekly and ICS build. I don't know about the ones from miuiandroid or miui.us, as I haven't tried them. But if they share a similar base, then theoretically they should share similar problems unless some post-release fixes were added like those of galnet.
To recover, these worked for me most times:
reboot
manualy trigger network registration
I'm back to CM now. It's most stable and usable for me.
ya, totally loss of signal. its bored to keep rebooting all the time. i dont feel like using the basic android layout/UI rom. MIUI is nice but got some issue. sigh.... anyway, thanks for replying. anyone else would like to help me out???
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Sckank said:
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Click to expand...
Click to collapse
This is good news. Will try. Where'd you get 823?
I got it from temaseek's media folder
kolo2x said:
This is good news. Will try. Where'd you get 823?
Click to expand...
Click to collapse
You can get it from Temasek's mediafire link. Huge thanks to him..!
But flashing this is little tricky. You need to extract the file, then flash the .fls files begining from the biggest file to the smallest - in this order.
flash R375_SIC.fls
reboot the phone
flash AENEAS_FW.fls
reboot the phone
slb.fls
reboot the phone
psi.fls
reboot the phone.
I use smartflash to flash basebands, that is available in the same link.
Hope this helps.
Sckank said:
I got it from temaseek's media folder
Click to expand...
Click to collapse
Lol...great minds and that...!
Thanx Divyan Im at work so its great you give a proper reply
really thanks to u.
No Problem, guys.. Glad that I could be of some help - so little comparing to what we get from XDA.
In the meanwhile, I did test MiUi 1.12.2. too. I used to get this problem of MiUi goes to airplane mode at times.
Then I have flashed Owain's Tweaks. I did make a difference. Phone did not got into airplane mode anymore. Above this I have flashed ironkernel too ( seeking better stability - with undervolt settings of -25 v using pimpcpu).
This combination worked good for me for a couple of days without any issues. Then I jumped back to CM7 Kangs .
You might give this combination, if you feel like.
I'm using 1.11.4 and been having a few issues recently with loss of signal and a reboot was the only thing that fixed the problem. I found that I had a mismatch of baseband and RIL. S I used getril from the market and everything seems ok now. Only had it on for a day so far but it's been fine...
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
divyan, i crash my set now. miui did not work on my 2x. tried flashed cm7 and kang. installed but did not boot up after 10 mins each. i downloaded LG RIL and GetRIL.
LG RIL did not mention if my RIL match with the baseband or not. but GetRIL says my baseband does not match with my RIL. i did follow your steps to flash the 823. not working thou.
now in CWM i can backup but i kenot restore. its automatically unmount the /system. darn. i think something wrong with my 2x.
seriously can u teach me how to redo all the stuffs?
i really like miui!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
yes bro, do remember to share your experience. seriously headache have to reflash and resetting the 2x all over again and again. kinda stressed!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
i have the same problem, with EVERY rom.
currently on 0725 baseband, V20L october version, nothing different: i got signal loss once-twice a day.
tried BB 0208, 0315, 0405, 0602 as well.
I 'll have to try 0823 with 4 separate files, as suggested in this thread
My phone always goes into airplane mode (by itself) after a reboot and a few hours of sleep time - im on cm7 with 725. Once that's done I just set the airplane mode off and it stops disconnecting from the network...
currently running on cm7 night #204 with 0823 and 0208 RIL. been good so far but got issue once i flash ironkernel. dunno why.
Related
I'm oppening this topic because i see that some users has network issues on the gingerbread releases. That's happens since first v20 build.
I had tried all the possible basebands and ril's, but the result is always the same: instable connection.
- Connection die suddenly and just returns after reboot
- Sometimes the signal of network drop and returns again
- At TIM operator cant get the "H" icon on topbar just 3G, with i can VIVO can get it H normally (it's not a feature, believe in me)
I guess that's something related to baseband because for some users everything goes normal.
Tested basebands:
725 for Gingerbread with matching ril
622 for Gingerbread with matching ril
725 for Froyo with matching ril
0622 for Froyo with matching ril
Hope someone can help, i really love the new Gr4 release, but i can't abdicate data connection for sure.
PING TIMEOUT STATISTICS http://dpaste.com/637671/
Problem solved:
1) Disable 'Automatic date/hour settings' on Settings > Date/Hour > Uncheck Automatic
2) Disable or change NTP parameter. In my case, i downloaded the ClockSync app (available at market) and set mannualy the NTP server of my country (in case br.pool.ntp.org)
I really don't know what the relation but until now, i get a stable network connection.
Hm, I tested 823 BB with matching RIL and I have to say that everything is fine
By the way: I have TopoGigis GB Release v1.8 SP1 (didn't want to upgrade since everything's working...^^)
TheSSJ said:
Hm, I tested 823 BB with matching RIL and I have to say that everything is fine
By the way: I have TopoGigis GB Release v1.8 SP1 (didn't want to upgrade since everything's working...^^)
Click to expand...
Click to collapse
It's good for you. Im seeing thats not a general issue, happens just with some mobile operators.
Unfortunally here i cant get a stable signal, im pretty sad about that.
I have no problem here too with bands, running 622..
if I were you, I'd stick with the baseband that came with your phone, it was intended by your carrier..
Sent from my LG-P990 using Tapatalk
droweed said:
I have no problem here too with bands, running 622..
if I were you, I'd stick with the baseband that came with your phone, it was intended by your carrier..
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
I already try that, same results.
Have you tried set dns pro? i dont know if it'd make any difference for you, for me it does.
When opening the app for the first time, it shows the phone is using google dns (8.8.8.8). i changed it with open dns, it went better. Still a bit slow (the ping, maybe), but better.
punyategar said:
Have you tried set dns pro? i dont know if it'd make any difference for you, for me it does.
When opening the app for the first time, it shows the phone is using google dns (8.8.8.8). i changed it with open dns, it went better. Still a bit slow (the ping, maybe), but better.
Click to expand...
Click to collapse
Already tried that, no sucess.
The slow speed doesnt bother me, the bad thing is the network drop.
I got those signal drop on 725 /614 /622 / 823 Baseband...
Best was 622 but with horrible voice on call !
Since CM 146 the 725BB don't work (many signal drop) so i try Miui with same result...
PS : i use getril to match RIL but sometime the BB is unknown and only restoring backup works..
Sorry for asking, I not so familiar with your problem.
Have you installed any apps in your phone, or the problem exists with untouched= after the rom installation?
622 for Gingerbread with matching ril ? please post link
fonsigno said:
622 for Gingerbread with matching ril ? please post link
Click to expand...
Click to collapse
http://android.modaco.com/topic/335494-12-aug-smartflash-stock-baseband-release-103521-20110725/
Get the ril with GetRil on Android Market.
afpapa said:
Sorry for asking, I not so familiar with your problem.
Have you installed any apps in your phone, or the problem exists with untouched= after the rom installation?
Click to expand...
Click to collapse
Untouched. That happens since the first gb release.
sebennett said:
I got those signal drop on 725 /614 /622 / 823 Baseband...
Best was 622 but with horrible voice on call !
Since CM 146 the 725BB don't work (many signal drop) so i try Miui with same result...
PS : i use getril to match RIL but sometime the BB is unknown and only retorin backup works..
Click to expand...
Click to collapse
What is exactly your configuration?
622 baseband for gingerbread or for froyo? The same question for RIL.
Thank you.
@felipemadox
Did you try BB 622 (gb) + standard cm7 RIL 218 + Network set to 'gsm auto prl' (after very reboot!) + No time syncing via android settings (use external app for this)??
This seems to be pretty damn stable! At least for me.
felipemadox said:
What is exactly your configuration?
622 baseband for gingerbread or for froyo? The same question for RIL.
Thank you.
Click to expand...
Click to collapse
725 GB works great with CM under 146 !
To be honest i try all BB available at temasek sharefolder with matching RIL (with Getril)
Configuration CM ROM with stock kernel and then MIUI
koboltzz said:
@felipemadox
Did you try BB 622 (gb) + standard cm7 RIL 218 + Network set to 'gsm auto prl' (after very reboot!) + No time syncing via android settings (use external app for this)??
This seems to be pretty damn stable! At least for me.
Click to expand...
Click to collapse
I guess that i cant use RIL 218 because im on Modaco Gr4 2.3.4. I already try the gsm auto prl and no luck with stability.
What means the "time syncing via android", i did not understand. Explain, please.
felipemadox said:
I guess that i cant use RIL 218 because im on Modaco Gr4 2.3.4. I already try the gsm auto prl and no luck with stability.
What means the "time syncing via android", i did not understand. Explain, please.
Click to expand...
Click to collapse
Disabile ntp server sync and automatic time sync from network.
ntp server sync and clock sync is already disable...
i don't have pin code asked any more so no network...and baseband is unknown !
Also tried with Gr4 based ROM but signal drop is still there...
PS @ Felipemadox : Those options are in the clock options
Topogigi said:
Disabile ntp server sync and automatic time sync from network.
Click to expand...
Click to collapse
Where did i font these 2 options?
I have a 0622 baseband and my phone is from Korea, but i live in Brazil, and i'd like to know if i need to change the baseband because im having some issues with my phone network, like sometimes the phone loses the signal and then it nevers come back and when i go to settings/wireless&networks/mobile/set network
it still lists the operators signal.
And if wanted a factory reset for my phone, how should i do it? Is there anyway to check the original baseband of my phone?
I'm using CM 7.2 with the latest etana kernel.
You can simply install the lastest brazilian LG's FW with its baseband using Smartflash or KDZ You can download all you need in the development section
jeffom said:
I have a 0622 baseband and my phone is from Korea, but i live in Brazil, and i'd like to know if i need to change the baseband because im having some issues with my phone network, like sometimes the phone loses the signal and then it nevers come back and when i go to settings/wireless&networks/mobile/set network
it still lists the operators signal.
And if wanted a factory reset for my phone, how should i do it? Is there anyway to check the original baseband of my phone?
I'm using CM 7.2 with the latest etana kernel.
Click to expand...
Click to collapse
there are a few things to check before you do anything/flashing:
1) try to check a suitable RIL...use GetRIL app or LG RIL Version app from the play store
2)I remember seeing something about the auto time selection in Temasek's Kang thread...try disabling the automatic time sync.maybe that is a solution.
3)tr changing to Temasek's Kang which is surely one among the best ROMs for O2X. HE ROCKS with his tweaks and cherry picks.
4)try using SU-660 Basebands....some of the devices dont respond well with normal BB.check tonyp's thread for a suitable BB and RIL combo.
going through a NVflash or kdz methods might be reserved for the last.
This is my opinion. but, take ur decision mate
Hope this helps
Problem with p990 simcard pincode....
Hey there,
I have a problem with my simcards pincode. He doesn't accept the pincode which on the other phone no problem with accepting of the pincode is..
I have the following info of my phone.
Andriod : 4.0.4
Smalbandversion: 1035.21_20110725
Kernel: 3.0.34-egb_p990-3
[email protected]#28
EBloodMod version: build5-aosp
buildnumber: IMM76D
I hope someone can help me with this problem solving this......
Thanxs a lot already...
thebaldyman1 said:
Hey there,
I have a problem with my simcards pincode. He doesn't accept the pincode which on the other phone no problem with accepting of the pincode is..
I have the following info of my phone.
Andriod : 4.0.4
Smalbandversion: 1035.21_20110725
Kernel: 3.0.34-egb_p990-3
[email protected]#28
EBloodMod version: build5-aosp
buildnumber: IMM76D
I hope someone can help me with this problem solving this......
Thanxs a lot already...
Click to expand...
Click to collapse
There is no BB/RIL combination at the moment that works with build version #5. All BBs show the same pincode error. Use build #4, that's working really well. Or have a look at a different ROM like Owain's.
Raum1807 said:
There is no BB/RIL combination at the moment that works with build version #5. All BBs show the same pincode error. Use build #4, that's working really well. Or have a look at a different ROM like Owain's.
Click to expand...
Click to collapse
Thanxs for the quick response,
I will try that and put build 4 on it.
:good:
It seems to me that the most common problem people are reporting with CM10 is related to the network, caused by the new RIL in the ROM. For those of us who actually use our phones as phones, this is not good! Also, any attempts to change the RIL via the GetRIL app, regardless of network or region, seem to cause a complete network loss.
So I thought I'd start a thread to consolidate everyone's accounts of their network experience with the new CM10 nightlies. Please post your region, carrier, and baseband, as well as a brief summary of any problems you have (if any). Getting all this info together in one clean list would be very helpful in assisting RC when he debugs.
I'll start here.
Region: Ontario, Canada
Carrier: Fido (subsidiary of Rogers Wireless)
Baseband: V21b (stock Fido baseband, never changed)
Problems: Signal bars fluctuate rapidly compared to CM7, on 3G. EDGE is less of a problem. Call quality is not affected so far. Able to make and receive calls and SMS.
Edit: Unsure if this is baseband/RIL related, but when I am calling through my in-car bluetooth handsfree, the bluetooth tends to disconnect itself and cut off my call.
Edit: List of basebands can be found on Tonyp's thread: http://forum.xda-developers.com/showthread.php?t=1658047
The same thread shows instructions on how to flash new basebands, along with download links.
I have also added a poll. Users can select multiple options if they find more than one baseband works.
Edit: OMFG, I forgot to add the V30 SU660 option in the poll and I can't figure out how to edit the poll... can a mod help me out?
From TrymHansen : http://forum.xda-developers.com/showpost.php?p=33504944&postcount=408
I've installed the BB From TonyP Thread >http://forum.xda-developers.com/showthread.php?t=1658047 Named 0420-V20m_SU660-Baseband
After, i've full-wipe and install the last nighlty with gapps.
Now, Date Hours is OK, battery look good.
ps: I don't know how to do a "strike" ------ but battery drain with that
What's the matching BB to the RIL that comes with CM10? I'd rather go that way than changing the RIL...
EDIT: Forget it, already checked the baseband thread in development, gonna flash the matching BB now
LarsPT said:
What's the matching BB to the RIL that comes with CM10? I'd rather go that way than changing the RIL...
Click to expand...
Click to collapse
Should be v30a
I installed cm10 nightly
Baseband: v20q europe
Ril: v10b
Im experiencing problems with call.
When ppl call me i cant hear them or they cant hear me.(85% times this happens)
Any solution plz?
Also sometimes my phn just keeps doing constant vibrating..have to remove battery n restart.
hirentherock555 said:
I installed cm10 nightly
Baseband: v20q europe
Ril: v10b
Im experiencing problems with call.
When ppl call me i cant hear them or they cant hear me.(85% times this happens)
Any solution plz?
Click to expand...
Click to collapse
+1
BB v20c
Ril default
Sent from my LG-P990 using xda app-developers app
Just use the 218 BB and stop worrying about ril.
Sent from my LG-P990 using xda app-developers app
I flashed many roms (stock Froyo/GB, CM, MIUI) using every time the updated baseband for Italy and I always forgot about ril and everything was fine; only once, following all the technical suggestions, I used getril to match bb/ril and had bootloop.
Now I have 20S bb and flashed CM10 nightly: wifi, phone voice/data and gps work fine.
EDIT: suggestion, download the bb of your country and forget ril
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
korgndm said:
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
Click to expand...
Click to collapse
I had 725 BB in the beginning... which was ok... then I flashed the most recent BB (non SU660) and I was very happy with it, better battery, better reception stability... so for me, the more recent the better, that's why I'll start by trying flashing the most recent BB instead of going back in RIL.
EDIT: Even if it's the toughest way to start!
I previously had the stock V20S (flashed the KDZ). With V20S BB, no problems with JB. No call issues, SMS issues, nothing. Stable signal. Local operator: Claro.
I have a very strange bug...I knew when I was in the unofficial builds that I had 0725 V10d BB, now the system shows that o have LGP990AT-00-V20Q-262-XX-JAN-24-2012+0...is it a bug or something? I recall that ROMs don't change basebands...Is anyone else having this bug?(I have wiped everything and I had also installed the new nightly and nothing changed)
Sent from my LG-P990 using xda premium
Andy HOT said:
I have a very strange bug...I knew when I was in the unofficial builds that I had 0725 V10d BB, now the system shows that o have LGP990AT-00-V20Q-262-XX-JAN-24-2012+0...is it a bug or something? I recall that ROMs don't change basebands...Is anyone else having this bug?(I have wiped everything and I had also installed the new nightly and nothing changed)
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
Your system says that you have 20Q bb and the system doesn't lie.
BTW, do you have some connection problems with CM10 or is it just a cultural problem?
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
korgndm said:
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
Click to expand...
Click to collapse
Do you have any problems?
Well I want to know why did cwm flash change my BB?..also I have worse signal then before and I have a bad download speed through 3g..and I dont know if BB is the problem here but I also have some problems in call sometimes(the one to whom I'm talking isn't hearing me)
Sent from my LG-P990 using xda premium
Why dont you link the basebands from ics in first post? I`m sure many would appreciate it
dark_sat said:
I previously had the stock V20S (flashed the KDZ). With V20S BB, no problems with JB. No call issues, SMS issues, nothing. Stable signal. Local operator: Claro.
Click to expand...
Click to collapse
I also have the same BB from V20s. Here are the issues that I saw in CM10, without changing RIL:
1. My phone number is shown as Unknown (in "About Phone").
2. Unable to see any contacts on my SIM card.
3. Unable to read a carrier's voicemail setup from my SIM card (need to configure access number manually).
4. Auto time is way off (need to set the time manually).
No problems with the actual functionality (signal strength, call audio quality, SMS, USSD codes). My location is Canada, Pacific time zone.
---------- Post added at 09:28 AM ---------- Previous post was at 09:21 AM ----------
Andy HOT said:
Well I want to know why did cwm flash change my BB?
Click to expand...
Click to collapse
Flashing CM10 from CWM definitely didn't change your BB. Something else must have been done on your phone...
Andy HOT said:
Well I want to know why did cwm flash change my BB?..also I have worse signal then before and I have a bad download speed through 3g..and I dont know if BB is the problem here but I also have some problems in call sometimes(the one to whom I'm talking isn't hearing me)
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
It has to be the RIL. Basebands are not affected by flashing the ROM, except for maybe the stock ROM. But custom ROMs like CM don't do anything to the baseband at all.
E.g. I've flashed CM7.1, CM7.2, and CM10 on my phone and the baseband has remained exactly the same as it was on stock froyo.
Region: Kerala, India
Carrier: BSNL
Baseband: v20i
Problems: unable to hear calls. everything else is fine it think
I can confirm that all issues with 0521 BB (no audio in call, bad time, etc) are solved with 0420 BB and default CM10 RIL.
Carrier: Orange
Region: Spain
Baseband: 0521 (v20s)
Problems: No audio in calls, bad time zone, random data drops...
Everything solved changing BB to 0420 SU660.
After install CM10 i lost the signal and battery status, please help me
BB 0725 V20Q
Hello,
Using MIUI ROM v6 BenzROM I use my phone normally takes the carrier network, everything ok, but when using ROM Maclaw CM10.1 ('20130829) the network does not work.
It is interesting that two people of Brazil and also using the same operator (Claro), said that normal phone functions of them, which are also i8190L. For them, everything works normally.
I've had problems with lack of NV.DAT, but I checked and everything is ok. IMEI, Baseband ... only network that does not.
Somebody help me?
--------
Update ~~
I've been trying to talk to Maclaw about the problem and he asked me to post the logcat and dmesg to check the error. I'll post here too in case anyone is interested.
Well, the reason for the update is not quite that, but I answered on the blog Maclaw, asking me to update my modem, but what I stated is different from the present.
Can I really do this? Will not damage my board?
Try flashing Stock rom from your carrier in ODIN and tell us whats happening it must work with out anyproblemz, otherwise your phone is damage
Kpoch said:
Try flashing Stock rom from your carrier in ODIN and tell us whats happening it must work with out anyproblemz, otherwise your phone is damage
Click to expand...
Click to collapse
Even with the ROM BenzROM v6 MIUI work, think you may be corrupted?
Just restore the backup of ROM BenzROM v6 MIUI network and functioned normally.
-------
After I restored the ROM Benz, reinstalled the Maclaw and gave the factory wipe, but still, nothing.
Come back to stock ROM and everything worked well too. I installed and gave Maclaw factory wipe, but the error continues.
I have same issue network is fine on stock rom but when i flash mclaws 10.1 theres no network at all and its a i8190N
Sent from my GT-N7000 using xda app-developers app
This is a big problem. I took some research and saw that it is already complicated. There were people who preferred to stay with the old ROM than with the wonderful Maclaw because consiguiu not solve the problem.
I'm still looking for a solution.
I remember an update that came out today and stated in the changelog that he updated the RIL, but still the error persists.
feelknOck said:
Hello,
Using MIUI ROM v6 BenzROM I use my phone normally takes the carrier network, everything ok, but when using ROM Maclaw CM10.1 ('20130829) the network does not work.
It is interesting that two people of Brazil and also using the same operator (Claro), said that normal phone functions of them, which are also i8190L. For them, everything works normally.
I've had problems with lack of NV.DAT, but I checked and everything is ok. IMEI, Baseband ... only network that does not.
Somebody help me?
--------
Update ~~
I've been trying to talk to Maclaw about the problem and he asked me to post the logcat and dmesg to check the error. I'll post here too in case anyone is interested.
Well, the reason for the update is not quite that, but I answered on the blog Maclaw, asking me to update my modem, but what I stated is different from the present.
Can I really do this? Will not damage my board?
Click to expand...
Click to collapse
Update.
Updated the baseband to AMH1 and now he even thinks 2 operators, mine and another. Sometimes I can record, but the signal is bad and once managed to make a call stable for almost 10 minutes, but as soon as I hung up since I could not do anything else.
Hi all,
I have just flashed CM7.2.0 which I downloaded from the official CM website....the flashing everything went fine but it seems unstable signal wise, high battery useage and also trying to turn on and off Airplane mode it sometimes wont work without a reset of the device. I was thinking possibly a Baseband issue?
The only thing I have no idea what baseband I am meant to be running on Gingerbread CM7....I was on the stock LG ICS rom before flashing. It says my baseband is currently 1035.21_20121130
Can anyone recomend the correct baseband for me?
Is the one above left from when I was running ICS?
Am I correct in thinking when flashing the baseband stays as it is....it doesnt come with the new rom?
I am sorry for all the questions but need big help.
Thanks
Tom
Tom163 said:
Hi all,
I have just flashed CM7.2.0 which I downloaded from the official CM website....the flashing everything went fine but it seems unstable signal wise, high battery useage and also trying to turn on and off Airplane mode it sometimes wont work without a reset of the device. I was thinking possibly a Baseband issue?
The only thing I have no idea what baseband I am meant to be running on Gingerbread CM7....I was on the stock LG ICS rom before flashing. It says my baseband is currently 1035.21_20121130
Can anyone recomend the correct baseband for me?
Is the one above left from when I was running ICS?
Am I correct in thinking when flashing the baseband stays as it is....it doesnt come with the new rom?
I am sorry for all the questions but need big help.
Thanks
Tom
Click to expand...
Click to collapse
Flashing a custom ROM cannot change your BB. Your BB presently is the ICS BB and ICS BB are always not supportive of the GB systems and communication.Your battery drain signal, drops, maybe because of that too
So, you need to change your BB to a GB BB as the CM7.2 is gingerbread stuff.
Changing the BB is only possible with smart flash or KDZ method. Please check tonyp's Baseband thread in the development section for all the answers for BB.
Hope this helps