Hi all,
I have just flashed CM7.2.0 which I downloaded from the official CM website....the flashing everything went fine but it seems unstable signal wise, high battery useage and also trying to turn on and off Airplane mode it sometimes wont work without a reset of the device. I was thinking possibly a Baseband issue?
The only thing I have no idea what baseband I am meant to be running on Gingerbread CM7....I was on the stock LG ICS rom before flashing. It says my baseband is currently 1035.21_20121130
Can anyone recomend the correct baseband for me?
Is the one above left from when I was running ICS?
Am I correct in thinking when flashing the baseband stays as it is....it doesnt come with the new rom?
I am sorry for all the questions but need big help.
Thanks
Tom
Tom163 said:
Hi all,
I have just flashed CM7.2.0 which I downloaded from the official CM website....the flashing everything went fine but it seems unstable signal wise, high battery useage and also trying to turn on and off Airplane mode it sometimes wont work without a reset of the device. I was thinking possibly a Baseband issue?
The only thing I have no idea what baseband I am meant to be running on Gingerbread CM7....I was on the stock LG ICS rom before flashing. It says my baseband is currently 1035.21_20121130
Can anyone recomend the correct baseband for me?
Is the one above left from when I was running ICS?
Am I correct in thinking when flashing the baseband stays as it is....it doesnt come with the new rom?
I am sorry for all the questions but need big help.
Thanks
Tom
Click to expand...
Click to collapse
Flashing a custom ROM cannot change your BB. Your BB presently is the ICS BB and ICS BB are always not supportive of the GB systems and communication.Your battery drain signal, drops, maybe because of that too
So, you need to change your BB to a GB BB as the CM7.2 is gingerbread stuff.
Changing the BB is only possible with smart flash or KDZ method. Please check tonyp's Baseband thread in the development section for all the answers for BB.
Hope this helps
Related
I'm currently using MIUI ROM 2.3.7 (build MIUI-1.12.2)
baseband: 1035.21_20110405
kernel: 2.6.32.45-cyanogenmod ([email protected]#1)
Curently having network breakdown issue. might have a few breakdowns in a day, sometimes don't have. do i need to upgrade baseband or kernel? can anyone help me please. i'm having a lots of appointment daily as i can't have breakdowns so often.
I don't understand what you mean by breakdown? Is it complete loss of signal? If it is then this happened to me in the galnet's latest weekly and ICS build. I don't know about the ones from miuiandroid or miui.us, as I haven't tried them. But if they share a similar base, then theoretically they should share similar problems unless some post-release fixes were added like those of galnet.
To recover, these worked for me most times:
reboot
manualy trigger network registration
I'm back to CM now. It's most stable and usable for me.
ya, totally loss of signal. its bored to keep rebooting all the time. i dont feel like using the basic android layout/UI rom. MIUI is nice but got some issue. sigh.... anyway, thanks for replying. anyone else would like to help me out???
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Sckank said:
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Click to expand...
Click to collapse
This is good news. Will try. Where'd you get 823?
I got it from temaseek's media folder
kolo2x said:
This is good news. Will try. Where'd you get 823?
Click to expand...
Click to collapse
You can get it from Temasek's mediafire link. Huge thanks to him..!
But flashing this is little tricky. You need to extract the file, then flash the .fls files begining from the biggest file to the smallest - in this order.
flash R375_SIC.fls
reboot the phone
flash AENEAS_FW.fls
reboot the phone
slb.fls
reboot the phone
psi.fls
reboot the phone.
I use smartflash to flash basebands, that is available in the same link.
Hope this helps.
Sckank said:
I got it from temaseek's media folder
Click to expand...
Click to collapse
Lol...great minds and that...!
Thanx Divyan Im at work so its great you give a proper reply
really thanks to u.
No Problem, guys.. Glad that I could be of some help - so little comparing to what we get from XDA.
In the meanwhile, I did test MiUi 1.12.2. too. I used to get this problem of MiUi goes to airplane mode at times.
Then I have flashed Owain's Tweaks. I did make a difference. Phone did not got into airplane mode anymore. Above this I have flashed ironkernel too ( seeking better stability - with undervolt settings of -25 v using pimpcpu).
This combination worked good for me for a couple of days without any issues. Then I jumped back to CM7 Kangs .
You might give this combination, if you feel like.
I'm using 1.11.4 and been having a few issues recently with loss of signal and a reboot was the only thing that fixed the problem. I found that I had a mismatch of baseband and RIL. S I used getril from the market and everything seems ok now. Only had it on for a day so far but it's been fine...
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
divyan, i crash my set now. miui did not work on my 2x. tried flashed cm7 and kang. installed but did not boot up after 10 mins each. i downloaded LG RIL and GetRIL.
LG RIL did not mention if my RIL match with the baseband or not. but GetRIL says my baseband does not match with my RIL. i did follow your steps to flash the 823. not working thou.
now in CWM i can backup but i kenot restore. its automatically unmount the /system. darn. i think something wrong with my 2x.
seriously can u teach me how to redo all the stuffs?
i really like miui!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
yes bro, do remember to share your experience. seriously headache have to reflash and resetting the 2x all over again and again. kinda stressed!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
i have the same problem, with EVERY rom.
currently on 0725 baseband, V20L october version, nothing different: i got signal loss once-twice a day.
tried BB 0208, 0315, 0405, 0602 as well.
I 'll have to try 0823 with 4 separate files, as suggested in this thread
My phone always goes into airplane mode (by itself) after a reboot and a few hours of sleep time - im on cm7 with 725. Once that's done I just set the airplane mode off and it stops disconnecting from the network...
currently running on cm7 night #204 with 0823 and 0208 RIL. been good so far but got issue once i flash ironkernel. dunno why.
Hi Guys, im not sure if there are still pinoys here, but anyways i was wondering if someone from manila can guide me where and what stable ROM can i use i am familiar on how to flash and root and all that but when i ran though all the threads about Custom roms and Kernels i am kinda confused now im afarid that if i flash a rom like CM7 on my O2X it'll not work the RIL and Baseband Version kinda made me confused. i am not sure if i need to change them or what tomake it work
I just recently updated my phone to 2.3.4 GRJ22 i am on V20d which the BB is 1035.21_20110725 any advise and any help will be greatly appreciated!!
Thanks in advance Guys!!
Joe,
Well I'm not from manilla but I can help of course
Uhm the latest CM7.2 kangs are really stable so if you want to use cm then I think you should flash them right away. As for stock I think guestes rom will also do fine since I've heard many positive reviews about it.
In the dev section you'll also find many threads about flashing the right BB etc. So follow the threads over there and I'm sure that you will get the right BB for your phone.
As for RIL, everything becomes even easier. Just install the GetRIL app (needs root access) and just install one of the many RILs over there.
I hope that everything is clear now
Sent from my Optimus 2X using xda premium
your baseband is just fine, i have the same..
and get ril will tell you if you have the optimal ril.. i have v10d europe open, but as long as everything works, there is no need to change it
Hey guys,
my girlfriend has a i9000 Galaxy S which has a lot of problems with call sound quality. When Incall the sound starts normally and then suddenly you hear some kind of noises, like radio interference (all kinds of creeking and various sounds). It will start and stop randomly during the call. This happens no matter where she is (in the apartment, out in the open, etc).
She is currently on stock Android 2.3.3 (non-rooted)
Baseband I9000XXJVO
Kernel [email protected] #2
Build number: GINGERBREAD.XWJVH
I wanted to ask how I can fix the problem? I have an Optimus 2X and I'm comfortable with it, have changed roms, flashed basebands etc on it, but I'm not sure if its the same for the Galaxy (although I suppose it should be similar).
Do I need to change baseband, ROM, Kernel (or all three?). and if so, which ones should I choose? She is an average user so she doesnt need something with high performance, just something easy and stable. I especially didnt see a thread for basebands and how to change them.
All your help is very appriciated. Thank you
I just saw the thread in this forum (was looking at the developers forum before) and saw the post with firmwares, basebands and instructions), but the question still stands:
what combination do I choose of baseband and rom, and do I take the stock rom or one of the custom ones (has to be very stable)?
Thanks guys
Guys? Noone?
Rather than messing about flashing
Modems, I would take the opportunity and flash stock jvt or the latest stock jvu and see if this fixes the problem, if it doesn't, there is probably a fault with the phone.
Sent using TCP/IP
gsw5700 said:
Rather than messing about flashing
Modems, I would take the opportunity and flash stock jvt or the latest stock jvu and see if this fixes the problem, if it doesn't, there is probably a fault with the phone.
Sent using TCP/IP
Click to expand...
Click to collapse
That is just the rom, or?
Yeah, just flash a whole new rom, jvu is the latest and is pretty good.
Sent using TCP/IP
Thanks for the help
I have a 0622 baseband and my phone is from Korea, but i live in Brazil, and i'd like to know if i need to change the baseband because im having some issues with my phone network, like sometimes the phone loses the signal and then it nevers come back and when i go to settings/wireless&networks/mobile/set network
it still lists the operators signal.
And if wanted a factory reset for my phone, how should i do it? Is there anyway to check the original baseband of my phone?
I'm using CM 7.2 with the latest etana kernel.
You can simply install the lastest brazilian LG's FW with its baseband using Smartflash or KDZ You can download all you need in the development section
jeffom said:
I have a 0622 baseband and my phone is from Korea, but i live in Brazil, and i'd like to know if i need to change the baseband because im having some issues with my phone network, like sometimes the phone loses the signal and then it nevers come back and when i go to settings/wireless&networks/mobile/set network
it still lists the operators signal.
And if wanted a factory reset for my phone, how should i do it? Is there anyway to check the original baseband of my phone?
I'm using CM 7.2 with the latest etana kernel.
Click to expand...
Click to collapse
there are a few things to check before you do anything/flashing:
1) try to check a suitable RIL...use GetRIL app or LG RIL Version app from the play store
2)I remember seeing something about the auto time selection in Temasek's Kang thread...try disabling the automatic time sync.maybe that is a solution.
3)tr changing to Temasek's Kang which is surely one among the best ROMs for O2X. HE ROCKS with his tweaks and cherry picks.
4)try using SU-660 Basebands....some of the devices dont respond well with normal BB.check tonyp's thread for a suitable BB and RIL combo.
going through a NVflash or kdz methods might be reserved for the last.
This is my opinion. but, take ur decision mate
Hope this helps
Problem with p990 simcard pincode....
Hey there,
I have a problem with my simcards pincode. He doesn't accept the pincode which on the other phone no problem with accepting of the pincode is..
I have the following info of my phone.
Andriod : 4.0.4
Smalbandversion: 1035.21_20110725
Kernel: 3.0.34-egb_p990-3
[email protected]#28
EBloodMod version: build5-aosp
buildnumber: IMM76D
I hope someone can help me with this problem solving this......
Thanxs a lot already...
thebaldyman1 said:
Hey there,
I have a problem with my simcards pincode. He doesn't accept the pincode which on the other phone no problem with accepting of the pincode is..
I have the following info of my phone.
Andriod : 4.0.4
Smalbandversion: 1035.21_20110725
Kernel: 3.0.34-egb_p990-3
[email protected]#28
EBloodMod version: build5-aosp
buildnumber: IMM76D
I hope someone can help me with this problem solving this......
Thanxs a lot already...
Click to expand...
Click to collapse
There is no BB/RIL combination at the moment that works with build version #5. All BBs show the same pincode error. Use build #4, that's working really well. Or have a look at a different ROM like Owain's.
Raum1807 said:
There is no BB/RIL combination at the moment that works with build version #5. All BBs show the same pincode error. Use build #4, that's working really well. Or have a look at a different ROM like Owain's.
Click to expand...
Click to collapse
Thanxs for the quick response,
I will try that and put build 4 on it.
:good:
Hello xda Community,
I've downgraded the baseband on my p880 to v10h due to some issues with GPS and provider signal.
I've used some custom roms before and the issues appeared at some update when I was on MoKee rom but I can't remember which update it was. The downgrade improved the phones performance and I have no issues with GPS and signal.
My Question: If I Flash a custom rom, - will it also update my Baseband? Say I'll flash a 4.3 Rom (I'm currently on 4.0.3) will it update my Baseband aswell to v20x?
Thanks in advance.
BlackSouI said:
My Question: If I Flash a custom rom, - will it also update my Baseband? Say I'll flash a 4.3 Rom (I'm currently on 4.0.3) will it update my Baseband as well to v20x?
Click to expand...
Click to collapse
Don't think so. I haven't even really seen any indication that the community understands HOW to update the baseband firmware. This phone has the radio on an entirely different chip with dedicated flash and ram for it. There are soft switches to throw (look but do not touch) in the hidden menu that switch the USB port over to it for flashing but nobody seems to know how to make use of that knowledge other than the official LG utilities. Flashing a third party ROM is entirely about replacing the unencrypted/unsigned partitions on the main application processor's flash.