looking for some 1 clicks for kk4. need both with and without bootloaders. that or a guide to making them and a copy of the stock kk4 with bootloaders. thanks in advance.
^ In the i897ucKF1 leaked Firmware .rar download, there is an Odin DL Creator that u can use to make One Click Downloaders. There are Manuals included in there as well, but unfortunately they got corrupted somewhere along the way and I could never find a way to open and read them. But the process to build the One Click was still easy enough to figure out.
Run the DLCreator v1.8 then choose the Downloader tab and then navigate to where this Creator file is and select the Odin3Execution v1.81 and then simply proceed down the tabs loading the files, select the Options u want (re-partition, auto reboot) and then select the File Name, then Downloader Title. After that is done select the Make Downloader tab.
Now I did encounter freezes/force closes (if u will) with the Creator, but I would just simply have to start over and then it would work. The i897ucKF1 firmware, u can get from here... http://www.sammobile.com/forum/showthread.php?t=306 (u will probably have to register and log in)
And as an alternative there is the Heimdall One-Click - ROM Packaging and Distribution System. See the link here...http://forum.xda-developers.com/showpost.php?p=19386742&postcount=1
4-2ndtwin said:
^ In the i897ucKF1 leaked Firmware .rar download, there is an Odin DL Creator that u can use to make One Click Downloaders. There are Manuals included in there as well, but unfortunately they got corrupted somewhere along the way and I could never find a way to open and read them. But the process to build the One Click was still easy enough to figure out.
Run the DLCreator v1.8 then choose the Downloader tab and then navigate to where this Creator file is and select the Odin3Execution v1.81 and then simply proceed down the tabs loading the files, select the Options u want (re-partition, auto reboot) and then select the File Name, then Downloader Title. After that is done select the Make Downloader tab.
Now I did encounter freezes/force closes (if u will) with the Creator, but I would just simply have to start over and then it would work. The i897ucKF1 firmware, u can get from here... http://www.sammobile.com/forum/showthread.php?t=306 (u will probably have to register and log in)
And as an alternative there is the Heimdall One-Click - ROM Packaging and Distribution System. See the link here...http://forum.xda-developers.com/showpost.php?p=19386742&postcount=1
Click to expand...
Click to collapse
thanks a ton. i remember seeing a guide somewhere on converting cwm zips to odin tars. i knew i kept my noobuntu install for something lol.
found the odin creator and a stock kk4 md5 ball. time to do some research on the proper way to remove the bootloaders.
EDIT: sorry for double post. please merge if possible.
Use an Archiver (IZArc, 7zip, etc.) and extract the .tar out of the .rar that u downloaded. Then click on the name of the .tar.md5 to rename it and simply delete the .md5 from the name. Select yes to make the change. Open the .tar and then u will see the files. Bootloaders are of course the boot.bin and sbl.bin files (they r in the main.tar file. Think it was named Code something blah blah). Drag them to desktop to keep in a seperate file and then just delete them out of the .tar file. The param.lfs of course contains the initial bootslash jpeg image. And etc., etc.
Also, just fyi, this was a full wipe leaked firmware. --> (Edit: the KF1 was a full wipe, all others since have only wiped /cache after the install. And the other leaks since KF1 have only been in single .tar file, where as the kf1 was in 3 different .tar files)
Sent by XDA Premium App
4-2ndtwin said:
Use an Archiver (IZArc, 7zip, etc.) and extract the .tar out of the .rar that u downloaded. Then click on the name of the .tar.md5 to rename it and simply delete the .md5 from the name. Select yes to make the change. Open the .tar and then u will see the files. Bootloaders are of course the boot.bin and sbl.bin files (they r in the main.tar file. Think it was named Code something blah blah). Drag them to desktop to keep in a seperate file and then just delete them out of the .tar file. The param.lfs of course contains the initial bootslash jpeg image. And etc., etc.
Also, just fyi, this was a full wipe leaked firmware.
Sent by XDA Premium App
Click to expand...
Click to collapse
KK4 isn't full wipe...
Sent from my SGH-I897 using xda premium
^ Yep, u r correct. My bad. I was thinking about the KF1 leak. Thanks for the correction.
4-2ndtwin said:
^ Yep, u r correct. My bad. I was thinking about the KF1 leak. Thanks for the correction.
Click to expand...
Click to collapse
Its fine, you know just don't want people going around with false info!
Sent from my SGH-I897 using xda premium
Related
Hi, I'm trying to use Odin 1.3 to flash JF7, and the SRE mod. I was running JF6 with the SRE mod. So far, I've used Odin one-click to wipe (with phone booted), reformatted internal sd (after reboot), and one-click restored to factory JF6 (from download mode). Now, my phone is booted, and not connected to USB. I have "Odin3. [Android + SLP]" open, and extracted the I897UCJH7.rar file, and also extracted the resulting I897UCJF7_homebinary.rar file.
Here's my question--how the hell do I use Odin 3?!? I've read that it can be picky, and I would rather just do it right the first time I've read all this stuff about .tar and .pit files, but cant seem to find them from any of the rars i've extracted. Odin3 is able to find I897UCJ7_homebinary.rar when opening a file in the "PDA" option of the program. When opening a file from the "Phone" option of the program, I'm able to open the aforementioned rar, and also the modem.bin file in the folder extracted from I897UCJ7_homebinary.rar.
So, do I open the file from the PDA option, or the PHONE option? Also, what's the deal with these pit and tar files? Do I need to load either to flash JF7?
I just can't seem to find a comprehensive overview of the program anywhere....
Thanks a lot!
Edit--turns out I897UCJF7_homebinary is actually a .tar file. The rest of questions still stand
Edit--It also seems that the I897UCJF7_homebinary.tar might just have to be loaded into the PDA sections of the app. Not sure about this yet.
Edit--I think the answer might be here, post #194: http://forum.xda-developers.com/showthread.php?t=780887
j1mb34m said:
Hi, I'm trying to use Odin 1.3 to flash JF7, and the SRE mod. I was running JF6 with the SRE mod. So far, I've used Odin one-click to wipe (with phone booted), reformatted internal sd (after reboot), and one-click restored to factory JF6 (from download mode). Now, my phone is booted, and not connected to USB. I have "Odin3. [Android + SLP]" open, and extracted the I897UCJH7.rar file, and also extracted the resulting I897UCJF7_homebinary.rar file.
Here's my question--how the hell do I use Odin 3?!? I've read that it can be picky, and I would rather just do it right the first time I've read all this stuff about .tar and .pit files, but cant seem to find them from any of the rars i've extracted. Odin3 is able to find I897UCJ7_homebinary.rar when opening a file in the "PDA" option of the program. When opening a file from the "Phone" option of the program, I'm able to open the aforementioned rar, and also the modem.bin file in the folder extracted from I897UCJ7_homebinary.rar.
So, do I open the file from the PDA option, or the PHONE option? Also, what's the deal with these pit and tar files? Do I need to load either to flash JF7?
I just can't seem to find a comprehensive overview of the program anywhere....
Thanks a lot!
Edit--turns out I897UCJF7_homebinary is actually a .tar file. The rest of questions still stand
Edit--It also seems that the I897UCJF7_homebinary.tar might just have to be loaded into the PDA sections of the app. Not sure about this yet.
Edit--I think the answer might be here, post #194: http://forum.xda-developers.com/showthread.php?t=780887
Click to expand...
Click to collapse
Yeah, that is pretty much all you need to do. Make sure you are using the full odin program and not the one click.
When I first flashed my GT-I9000 I didn't know about the ClockworkMod backup option, so used the Dump option in ODIN3 - thinking this would cover all bases.
Now I've got a .odin3.dump file and don't know what to do with it.
The PDA field only allows .tar .md5 and .smd files
but the PHONE field allows .bin files
Do I rename it to .bin and use it as a PHONE file?
If so - What would be the settings to flash i.e. 512.pit / Re-Partition / EFS Clear?
I've founds lots of posts asking what to do with the .odin3.dump file, but no answers - I'm sure a lot of folk would welcome an answer to this.
GalaxyS_JAB said:
When I first flashed my GT-I9000 I didn't know about the ClockworkMod backup option, so used the Dump option in ODIN3 - thinking this would cover all bases.
Now I've got a .odin3.dump file and don't know what to do with it.
The PDA field only allows .tar .md5 and .smd files
but the PHONE field allows .bin files
Do I rename it to .bin and use it as a PHONE file?
If so - What would be the settings to flash i.e. 512.pit / Re-Partition / EFS Clear?
I've founds lots of posts asking what to do with the .odin3.dump file, but no answers - I'm sure a lot of folk would welcome an answer to this.
Click to expand...
Click to collapse
I would... lol Ever find out?
Nope, still hoping someone will reply with what the dump file is for.
I would like to upgrade my stock firmware to KL4 using Odin and am unsure if I need a Pit file or will the tar file be all that I need. Also, do I need to select "Re-Partition" in Odin?
Thanks for any help
you dont need the pit file, you just need the tar file or the files containe within the tar file
Richy99 said:
you dont need the pit file, you just need the tar file or the files containe within the tar file
Click to expand...
Click to collapse
Thanks for your reply. Do I need to select re-partition?
Gaugerer said:
I would like to upgrade my stock firmware to KL4 using Odin and am unsure if I need a Pit file or will the tar file be all that I need. Also, do I need to select "Re-Partition" in Odin?
Thanks for any help
Click to expand...
Click to collapse
If you have 3 files after extracting (CODE,MODEM,CSC) then attach these three files as PDA=CODE , PHONE=MODEM, CSC=CSC, if you have one file the attach it in PDA,
Then UnCheck Re-partition,
no need to select Pit file,
Put your phone in download mode,
Attach phone to PC
Once your PC detects your Phone Click Start
After Flashing Device restarts twice. Done..
ranjan.alva said:
If you have 3 files after extracting (CODE,MODEM,CSC) then attach these three files as PDA=CODE , PHONE=MODEM, CSC=CSC, if you have one file the attach it in PDA,
Then UnCheck Re-partition,
no need to select Pit file,
Put your phone in download mode,
Attach phone to PC
Once your PC detects your Phone Click Start
After Flashing Device restarts twice. Done..
Click to expand...
Click to collapse
Thanks very much for your very helpful reply.
Remember using PC Odin to update, you are closing way to Root your device, If you want to Root it, just Root before it. See installation guide on my signature for further detail
dr.ketan said:
Remember using PC Odin to update, you are closing way to Root your device, If you want to Root it, just Root before it. See installation guide on my signature for further detail
Click to expand...
Click to collapse
Thanks for your advice and the guides which are very helpful. I've downloaded the German stock ROM (LA4) from your list but I've been unable to extract the tar file using Winzip, so I'm stuck at the moment. Any further help from anyone how to extract the files would be appreciated.
Gaugerer said:
Thanks for your advice and the guides which are very helpful. I've downloaded the German stock ROM (LA4) from your list but I've been unable to extract the tar file using Winzip, so I'm stuck at the moment. Any further help from anyone how to extract the files would be appreciated.
Click to expand...
Click to collapse
Dont use winzip to extract . Use 7z Extractor. its free.
Link to 7z
http://www.7-zip.org/download.html
ranjan.alva said:
Dont use winzip to extract . Use 7z Extractor. its free.
Link to 7z
http://www.7-zip.org/download.html
Click to expand...
Click to collapse
Thanks once again for your help. I didn't know that Winzip did not work and that I needed 7z which I have downloaded and extracted the tar file.
I had a problem with Odin. Could not get it to flash la4 no matter what I tried.
So I bought mobile odin , put the relevant file on my phone and I was upgraded in under ten min Awesome app, sometimes its worth payin some money to get the job done
Sent from my GT-N7000 using XDA App
does anyone know if there is a apk file or something so i could flash the my files app on my cappy that usually come on the cappy with the official firmwares? i just need some kind of file to do that because i dont like astro and es file manager, etc. even a link to somewere where this has been done before would help, thanks.
I don't have an answer for you, just a recommended alternative in case you cannot find My Files.
I put Dual File Manager on every rom I try.
View attachment MyFiles.apk
here is
I promise nothing
ok mabye not, i meant a .tar file so i can flash with odin3
sorry about that
Why did you just open a new thread for that???
Take this apk and follow any of the ways i described in that thread....and in the future DON'T OPEN NEW THREADS FORE THE SAME THING!
sorry, then how do i do that with the apk file? like how do i make that a tar file or something to flash it with odin
Check your other thread...i listed 3 options.
hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthread.php?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d98c/S5570JPKT2_S5570OJPKT2_EGY.zip.html but without bootloader;
thankx
Send a pm to annson08.. Include the link and he may do it for you..
kitrax59 said:
Send a pm to annson08.. Include the link and he may do it for you..
Click to expand...
Click to collapse
Don’t give me a fish, teach me how to fish.
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Unpack rom..search bootanimation.zip.....replace with any other of ur choice
....repack
Sent from my GT-S5570 using xda premium
bilel2301 said:
hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthre...?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d...Y.zip.html but without bootloader;
thankx
Click to expand...
Click to collapse
unpack rom and its contents
open boot.image
in that remove arm11 boot
pack your rom !
flash it via odin
abdovar said:
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Click to expand...
Click to collapse
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
bilel2301 said:
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
Click to expand...
Click to collapse
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
a.cid said:
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
Click to expand...
Click to collapse
yeah i used cygwin too but i failed to make the output file work on odin!!!
i used this method from yagya:
Code:
cd firmware_directory
// Goes inside firmware directory
tar -cf firmware_name.tar amss mibib oemsbl qcsbl boot.img recovery.img system.rfs csc.rfs
// This will create a tar_file named firmware_name.tar containing all the files mentioned afterwards. You'll need to check if all files except arm11boot are included or not and add (or remove) to or from above list.
md5sum firmware_name.tar >> firmware_name.tar
// Checks md5sum of the tar file.
mv firmware_name.tar >> firmware_name.tar.md5
// Renames the firmware file. The outcome of this is your flashable zip file.
[optional] gzip firmware_name.tar.md5
//zips the firmware_name.tar.md5 file as gz format. It is easier while sharing the file since it reduces the file size by almost 50 %.
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
dhlalit11 said:
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
Click to expand...
Click to collapse
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
bilel2301 said:
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
Click to expand...
Click to collapse
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
annson08 said:
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
Click to expand...
Click to collapse
the link that you send to me is the link of my thread in yagya's forum
i try yagya's method but it doesn't work for me :/ :/
please when you have time pm how to do it thankx