Related
I have searched for solutions for the past 2 days but cant find one, if i missed it or this post is redundant , i apologize in advance.
Now my tilt is driving me crazy. It started last week when The touch screen wasnt working, but i fixed it by doing a couple of soft resets. then all the sudden, everytime i slide my keyboard out, the touch screen would stop responding. this went on for a day, then yesterday, when i tired to use the keyboard, the screen went blank, like the light died or something. but when i put it back on portrait, the screen would light up again.
A few moments later, the touch was responding, tried to use the keypad then the screen went blank..tried soft resets about 5 times and uninstalled all recent added programs (skyfire) ..finally the screen was working but the touch still wasnt working.
So this morning, i had the bright idea to do a hard reset....dumbest idea ever cos now its stuck at the screen where i have to "tap the screen to set up your wm device" and guess what..the touch screen isnt responding
plz i really need help with this. all so , i have a broken tilt.., well lcd screen is cracked...can i try to dismantle both tilts and replace the screens?
Ok, i used Code Factory's Remote screen alignment to bypass the alignment, but if i cant use the touch screen or the keyboard, the phone is pretty much useless for sending any information or making calls..is there a way to fix this?
I have had this same issue with my tilt. I could use the scroller on the left side of the unit to navigate but no touch screen. Both times that this has happened to me I removed the screen protector that I had on and restored a backup that I had on my storage card (I run a backup weekly). This has always fixed my issue. You could try another hard reset, not sure if that will help but do you get any lights on the keyboard when you slide it open? Is your tilt less than a year old because there is a manufacturer's warranty too.
Jim
when i slide the keyboard, i do get lights on the keyboard but not on the screen...it just goes dead..but when i slide it back in, the screen comes to life.
I cant do another hard reset cos i have to input the "1,2,3,4" code.
Also , the phone just got out of the 1yr warranty this month...awesome
I want to buy a replacement screen with a new digitizer but i need to be sure that is the problem.. ive searched for this keyboard problem but still have no answers
Now I'm having the same issue, touch not responding. I first noticed it about two days ago, when I slide the keyboard out, I could type just fine, but when I went to send the message the touch screen wouldnt work, so I'd close the keyboard and it would work. well yesterday it stopped working all together, so i used my d-pad and did a sprite restore and it started working again. But then On my way home i hit the lock button, and it stopped working after that, and I couldn't get it unlocked. I used the inner soft key to hit the first part of unlock, but then I couldnt ever figure which button to hit to get the on screen part of the unlock. So I had no choice but to do a hard reset, and just like highoct now I'm stuck on the stylus setup , and the touch still doesnt respond. does anybody esle have any suggestions ? Thanks in advance.
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Oh yeah, I did manage to do a hard reset again, but now the screen is just white. I can hear the sound of it booting up but it still has a white screen. I tired going to the Bootloader screen ( Camera and power at the same time)...still have the white screen. I believe its a hardware problem but i don't know what it is...any ideas?
Ok now I've done a hard flash, using the same HTC kaiser rom 6.1 and it fixes the problem for a little bit, until the first time I slide out the keyboard , then the screen stops working again, any suggestions ?
iPhone 3G Screen Repair...finally an affordable answer
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Does this look like an apple website? did i say i had an iphone? GET OUT OF HERE!!!
Ninety Four said:
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Click to expand...
Click to collapse
And thats his only post, its spam. jerk him outta here
Tilt Touch Screen
highoct said:
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Click to expand...
Click to collapse
I know this thread is a bit old but was searching d forum for possible solutions cos yesterday i developed the same exact problem on my kaiser for no apparent reason!..flashing it hasnt helped and now im stuck on the wm setup screen..when u say u still have the same tilt with the original problem do you mean that the repair was unsuccessful? have you tried reparing it yourself? Thanks
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
grayfoxmg1 said:
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
Click to expand...
Click to collapse
same thing happened to me 3 days ago. touchscreen has just stopped responding.
it still worked when i slided my keyboard out, but only when it was out. then i realized it won't work at all (!) after soft reset. however, i could make it work again like that when i did the soft reset with the keyboard out. weird.
i tried searching, and decided to make a hard reset, flash a new rom, etc, etc., but no more touchscreen. at all. the device doesn't feel any touch in any case. nothing. i bypassed the beggining tap here with the storage card trick. (i've read it somewhere on the forum).
now i can only use my kaiser with the hw buttons, the keyboard, and that's it. no touch. really weird. please if anyone has any updates, solutions, anything, post. sniff sniff
mine doesn't have anything on the screen unless i slide it out, if i have it closed anymore, it just doesn't work at all.
try this:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
se1988 said:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
Click to expand...
Click to collapse
well, i tried both tips, but they didn't work. i'd like to say a big thanks anyway!
then i grabbed the kaiser service manual and took my device apart into pieces. i reconnected pretty much all the cables and stuff, but still no touchy. any further ideas?
you should try replacing the screen. im happy to say that this screen from this seller on eBay worked for me: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250539984183
look here for dissasembly video: http://www.fonlogix.tv/tiltlow.wmv
(to save it to desktop right click link and "save target as")
thanks for your help, i've just ordered a new screen! phew, i hope it's gonna work
My tilt is acting very nasty lately. Over the past few weeks, I noticed that when I turned on the display, occasionally I would get something that looked like the static that you see on TV, but with colors. I would just turn off the screen, and turn it back on to clear it.
Now it's gotten worst! 98% of the time, it intermitantly gives me a blank solid white screen when I turn it on. Occasionally I can just turn to screen off, and on to reset it.
I'm running OEM WM6.1, and I've tried to reinstall the OS, but it didn't help. My phone has taken a beating, and the top corner has had a small crack in it over the past 2 months, but it didn't effect the touch screen, or picture. I also took off the cover to make sure the cables were all snug, and it didn't help.
Any suggestions?
Something got corrupted. If you search WIKI, it's call the 3 color screen stuck .. and you're better off posting at thread below. I hope someone can give you help (if you follow those steps and still no good)
As rule of thumb, do a lot of reading first
http://forum.xda-developers.com/showthread.php?t=423486
On a second thought, it might be the LCD itself broken ..
Oh, believe me.. I'm not one to turn to the forums without doing research myself! All the research I was coming up with seemed to point to a slightly different WSOD though. I think you are right about the screen being broken. I've reinstalled the software, and it acts up even when booting up!
Unfortunately, I'm not impressed with ANYTHING on the market to date! If I'm unable to fix this, I'll just go back to a RAZR until the next gen WM7 phones come out. (With a tilt screen of course!!)
Oh, and even though the screen goes white, it's not stuck, as it fully boots up; I can hear sounds, and even activate the touch screen.
Also, I forgot to mention.. the first problem I started experiencing was that my tilt would go back from landscape mode! It was like the video board was crapping out. I could even see a slight flicker in the display from the refresh rate.
hi i think you may need a new Need a new flex cable ribbon as i had the same problem once
Thanks Tayzaa, I think you could be on to something. I'll open it up and take another look!
Hi!
is this problem solved?
WSOD is bug of Hermes. I would know if kaiser have the same WSOD-bug with D-pad?
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Lesiroth said:
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Click to expand...
Click to collapse
Same with me, i can't reach from menu in a bottom side to upper side, maybe 10mm dead space + 7mm right side from bottom side to upper side.
Please help me!!
Sorry my english is not good
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
thanks but no fix it for my phone
I had the same problem sometime last year, which I eventually fixed by clearing cache partition and rebooting a bunch of times.
Unfortunately, the problem re-appeared today. So far, rebooting and clearing cache hasn't worked.
By any chance, have any of you installed the WiiMote Controller App? I was convinced that was what was doing it to my phone. (maybe not, as I never re-installed it though)
I'm about to flash the sbf file, but as Lesiroth said, that might not work
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
haroldz123 said:
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
Click to expand...
Click to collapse
my problem seemed to be disappeared after i soft reset n use stock rom
i tot launcher pro was the culprit but it is not
so i re-install LP n use for 1 day
d only problem i had was when i went for a jog, i tucked it on my waist (no in the pocket).
after that the screen stop working at all, i have to reboot by taking the battery a few time.
after 30 min or more, the problem was gone.
tis could be due to the stress applied to the screen when im joggin (as it it as "touched" while im jogging).
however, i removed beautiful widget n its addon too, dat could the source of the problem as well.
SOLUTION: soft reset, use stock rom / launcher for 1 day
if it still persist, it could a hardware problem
jtnw said:
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
Click to expand...
Click to collapse
I am glad that you solved your problem. Unfortuntely the past week or so has been a really busy time for me, I could not focus on this problem. I will try your solution, although I still think it is a broken digitizer on my part.
maybe the problem is the digitizer..
try to change rom or wipe it first..
if the problem still persist i think its the digitizer..
use only the original charger..
OMFG that worked on my phone!!!
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
----------------------------------------------------------------
A segment of my phone covering the home button went dead two weeks ago.. and duuuuude did this work!! its super smooth as ever!!! thanks a ton!!
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
silverslasher said:
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
I am not sure whether it is my mind playing trick with me or not, but I feel like my phone is less sensitive after I did the hard reset (power+volume down). Sometimes I need to press 2-3 times because the first light tap was not detected.
So is there anyway to increase the sensitivity?
I have the same problem, but no idea that is the hardware or only software problem.....
Fresh owner of this Optimus 2X in France, in our community, frandroid.com, we encounter the same problem , I think this is a software issue.
Did someone already contact LG??
Maybe they should include this into the bug list thread.
May I know were you guys having this problem since it is out of the box? or after reset?
I have the same problem started from day 1 till now
I have the same issue and already thought I'd be the only one having this problem.
I would not say it's a problem with sensitivity, but it feels like the touchscreen goes into some kind of sleepmode where then you need to press a second time, to wake it up.
Continuous touching is no problem. (like when typing rapidly on the keyboard)
This video is not from me, but it shows the problem.
Have a look at 13:28 and 13:37. The reviewer tries to hit the "Ackermann" entry, but the touchscreen does not recognize the touch. At 13:37 the guy has to press another time to get the entry selected.
http://www.youtube.com/watch?v=VRid-Yhu7Gg&feature=player_embedded
Yes! The touchscreen is definitely less sensitive than my old HTC Hero, and gets quite frustrating sometimes when a scroll misses the first part of the movement or a click is missed.
Sent from my LG-P990 using XDA App
just in case, are you guys using 20110218 baseband too?
The same problem here. If I unlock the screen and then tap on any on screen apps, I need to touch again for it to open. Only the first time though, after that it function ok. I think this is a bug and needs to be fixed... I have my pc for double-click.
Yep, count me in. Same problem here. Sometimes screen taps aren't registered. Will do some research later on, but I think it's a software problem. (maybe you have to tap 2x as fast )
Hi,
same problem here!
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
9mmBullet said:
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
Click to expand...
Click to collapse
I see, then probably they will fix it on the next update/gingerbread?
Same issue here.
Correct me if I'm wrong, but the problem seems to be that the screen has zero tolerance when it comes to tapping and swiping together. If you tap and slide your finger a bit directly after the tap, the tap is ignored. In other words your tap has to be a steady tap when you click on a button or an app. Right on the spot and with no swiping or sliding afterwards. I can't reproduce this on any of my other devices.
Ergo, it seems that the natural tapping I'm used to isn't working on the x2. It seems like I have to adjust my tap. I think that this could in principle be solved with a setting somewhere, because clearly the x2 is capable of registering this in for example a web page.
The great thing of this is that you can safely tap and swipe in the app drawer to scroll up and down or left and right. The downside is that a tap with a little swipe isn't registered at all. I would say that LG has choosen here for a wrong setting.
My personal experience about screen sensivity.. can you confirm if it's the same for your device?
I noticed a strange touch response.. and after some tests, I can say that the touch screen and icons are influenced by the surface where the phone was put!
with the phone in my hands, it's all ok (only sometimes - rare - I need to tap more than once).
If I put the phone over a glass surface (like a glass table) without touching it with both hands, the touch and the icons not respond!! NEVER!
If I put the phone on my scanner the touch screen works ok, but the icons not (or only few and rare taps was detected).!
If I put the phone over my big Onkyo amplifier.. It works like in my hands.. or better!! even without touching with hands.. only with a finger!
Put it back on my glass table.. and all stop working again. If I put a aluminium foil under the phone (between phone and table).. the touch and the icons works again !!
If I put it on the bed.. it don't work.
LG support say that they have tested the phone about this issue after my report.. but no strange response was detected by them. I don't know if they really tested it..
Try it and let me know what you think about!
tested on glass surface, I can press and swipe through pages with a finger without problem.
it is true that my device is not so responsive, but aint reaching that level yet
i read about a similar behaviour on other devices because some devices need a proper grounding for the capacitive screen to work correctly. You can find this problem via google.
Some devices have problem in a car-mounting, for example.
But i think thats not the problem the thread-opener talked about?
Guys I'm looking to get this phone and after reading Engadgets review of the X2 where they mention that the screen is not as sensitive to the touch as other phones I got a bit worried and started googling which lead me here!
Is this true? The screen isn't very sensitive and you have to apply more pressure than other capacitive phones?
I know that the OP is talking about a different issue but I reckon LG will get that sorted out via software update, or at least hope so!
Please do post your experience about the screen sensitivity of the X2 as this is putting me off. I currently have the Motorola Milestone 2 which is very sensitive to the touch even with a screen protector on it.
Cheers
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
123talis said:
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
Click to expand...
Click to collapse
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
killerbie said:
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
Click to expand...
Click to collapse
Problem is, that in my country, there is no official service center, thus it has to be sent to our neighbor, and because of that, it takes forever to work it out. I could live with that, if there is no self-help, but I was just wondering whether there is some app or setting or not.