Related
My Captivate became the brick by failure of the recovery.
The screen remains black.
The power button and volume buttons no response.
In Japan, I cannot repair it.
I am not a member of AT&T.
Please teach it if know the shop repairing other than AT&T.
step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible
It is not a download mode.
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.
vv.jp said:
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.
Click to expand...
Click to collapse
try building the adapter in the thread i posted, supposedly it forces download mode. also it is posible to be in download mode with a screen that is black, it happened to me once, try to flash it anyway.
you might need to take a trip to akihabara to build the jig but it's worth it i think.
also if the phone starts to a black screen then master clear it with odin one-click on that screen.
thanks for the info. saved my phone. thanks
Thank you for giving good advice!!
Thank you for giving good advice.
I try a method of "jig".
Thanks!!
Dani897 said:
step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible
Click to expand...
Click to collapse
Hard bricked my phone. wont even turn on now
shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Maybe not. I thought I was there too.
Keep trying the battery pull method. It took several times before it finally worked for me.
Here's one version:
http://forum.xda-developers.com/showpost.php?p=9024244&postcount=7
but you can try other button combinations (like just volume up, or just volume down).
If you don't see anything on your screen, that doesn't mean it hasn't worked. Sometimes the graphic for download mode gets screwed up so the screen will still be black, but ODIN will still recognize the phone.
If you really are hard bricked, then you need jtag service. MobileTechVideos can do it for you.
shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Make/buy a Jig (forces the phone in to Download mode) if that doesn't work then like startngate said you will need a Jtag to fix it.
thanks for the reply i took it into a samsung certified repair tech here in the city he has a jtag machine. odin wouldnt recognize my device at all
Droid 3 is Bricked
I used Pete's One Click to root phone, achieved root, unrooted, and generally had no problem. I installed Bootstrap, removed it, then installed Safestrap. Then I tried to use Pete's One Click again to try to unroot the phone. It said I could not use it on this phone. I tried it again, it started working, completed step one and then it went into a bootloop, past the twin core and into the red flashing Droid beacon and then repeat.
I read the boards, I downloaded Pete's Droid3 OTA 5.6.890 OneClick.zip and I believe I did it all correctly. My battery was charged, I got to fastboot and the following occured:
erasing userdate...OKAY
erasing cache...OKAY
sending "recovery" (9216 KB> ... _ (flashing)
And it stopped! I let it sit for hours, I retried, I emailed psouza4, he was responsive, suggested I post problem here. Help please, Thanks.
Do you have the updated drives on your computer? I'd hunt down the freshest ones and try re-running the unbrick script.
Drivers are up to date
Believe I have the latest drivers, been fooling around with my phone using different programs and never had a driver problem. Used MyPhoneExplorer to link phone to laptop, PDANet to tether and no problem. Thank for your suggestion.
Chrissell said:
Droid 3 is Bricked
I used Pete's One Click to root phone, achieved root, unrooted, and generally had no problem. I installed Bootstrap, removed it, then installed Safestrap. Then I tried to use Pete's One Click again to try to unroot the phone. It said I could not use it on this phone. I tried it again, it started working, completed step one and then it went into a bootloop, past the twin core and into the red flashing Droid beacon and then repeat.
I read the boards, I downloaded Pete's Droid3 OTA 5.6.890 OneClick.zip and I believe I did it all correctly. My battery was charged, I got to fastboot and the following occured:
erasing userdate...OKAY
erasing cache...OKAY
sending "recovery" (9216 KB> ... _ (flashing)
And it stopped! I let it sit for hours, I retried, I emailed psouza4, he was responsive, suggested I post problem here. Help please, Thanks.
Click to expand...
Click to collapse
Did you remove safestrap before you unrooted the phone (i.e., from the safestrap app on the phone, tap the button to remove recovery)? If not, you may have two bootstraps on the phone?
Not sure, believe so
I am not sure on this. I remember opening Safestrap and having two choices. I believe one of them was remove recovery and I believe I did this, then tried to unroot. But, if I assume I didn't and I assume I have two Safestraps on there, is there a solution? Thanks.
Seems like you need to SBF.
http://dl.dropbox.com/u/61707107/Ve...izon+DROID+3+OTA+5.6.890+to+phone_psouza4.zip
After you've connected the phone with the stock cable and booted up with M+Power and used volume down to highlight AP Fastboot and up to select it, double click the thing that says "CLICK HERE TO FLASH...etc." Let it run and your phone will be box stock
kapilthio said:
Seems like you need to SBF.
http://dl.dropbox.com/u/61707107/Ve...izon+DROID+3+OTA+5.6.890+to+phone_psouza4.zip
After you've connected the phone with the stock cable and booted up with M+Power and used volume down to highlight AP Fastboot and up to select it, double click the thing that says "CLICK HERE TO FLASH...etc." Let it run and your phone will be box stock
Click to expand...
Click to collapse
Haha, copy paste much? I'll take credit for being the author of this. (http://forum.xda-developers.com/showthread.php?t=1555418)
redsox985 said:
Create a Nandroid backup and place it on your PC for when you get your replacement. Then download and run this...
http://dl.dropbox.com/u/61707107/Ve...izon+DROID+3+OTA+5.6.890+to+phone_psouza4.zip
After you've connected the phone with the stock cable and booted up with M+Power and used volume down to highlight AP Fastboot and up to select it, double click the thing that says "CLICK HERE TO FLASH...etc." Let it run and your phone will be box stock. The only thing it can't fix is the radio hack, but no rep will ever be able to see that since RadioComm is proprietary to Motorola.
Click to expand...
Click to collapse
Regardless, I hope this fixes your problem!
New DL link...
http://bit.ly/D3UnBrick
Already tried that
I thank the above posters for their suggestions but I already tried and described above what you are suggesting. I did download two versions of Pete's SBF routein and it did not work. That was why I was seeking further help.
There's only one Pete's SBF?? Did you try RSD Lite?
Got unbricked
Despite multiple efforts (an e-mails to Pete) the .bat provided in the suggestions above stalled after step 1. I finally figured out that I could download 906update.zip (230,242 kb) to my computer, place it on my SD card using an adapter (does not matter where you place it) and then placed SD back into the phone. I pushed power button down as well as the up and down vol buttons with the power buttons at the same time to get to the Boot Selection menu, pressed the down volume key, then the up key to go into recovery. You get the green robot and an ! in a triangle, hold power button and vol buttons in and down vol to "apply update from sdcard". Let it run and was fine.
if anyone knows of a post that describes the use of the items under the Boot Menu such as BP Tools et cetera, I would appreciate it. Thanks.
Chrissell said:
Despite multiple efforts (an e-mails to Pete) the .bat provided in the suggestions above stalled after step 1. I finally figured out that I could download 906update.zip (230,242 kb) to my computer, place it on my SD card using an adapter (does not matter where you place it) and then placed SD back into the phone. I pushed power button down as well as the up and down vol buttons with the power buttons at the same time to get to the Boot Selection menu, pressed the down volume key, then the up key to go into recovery. You get the green robot and an ! in a triangle, hold power button and vol buttons in and down vol to "apply update from sdcard". Let it run and was fine.
if anyone knows of a post that describes the use of the items under the Boot Menu such as BP Tools et cetera, I would appreciate it. Thanks.
Click to expand...
Click to collapse
I'm glad it worked, but I don't want anyone to read this and think your button combos are exactly correct. You need...
Boot with X+Power
Push volume up and down simultaneously when at the triangle screen
Use volume keys and power to confirm selections in stock recovery
Thanks for clarity
Thanks for the above. I was going from memory.
I recently bought my xt894 from china and wish to flash it with ics
I've it rooted and installed safestrap
But after I switched to safe mode enable, whatever rom I flashed, I got into the bootloop tht either blank screen or stucked in android logo.
I am new to droid 4, any help would be appreciated!!:beer:
Is it related to my gsm unlocked with chinese rom?
Sent from my DROID4 using XDA
disablewong said:
I recently bought my xt894 from china and wish to flash it with ics
I've it rooted and installed safestrap
But after I switched to safe mode enable, whatever rom I flashed, I got into the bootloop tht either blank screen or stucked in android logo.
I am new to droid 4, any help would be appreciated!!:beer:
Is it related to my gsm unlocked with chinese rom?
Sent from my DROID4 using XDA
Click to expand...
Click to collapse
The first time I flashed an ICS ROM on my D4 it bootlooped as well. I had to wipe data and cache and then it booted right up.
Yes I know I gotta wipe both cache and data and I done it twice, but still nothing show up.....it is just the blank black screen, no any animation at all...
Sent from my DROID4 using XDA
Please Help!
disablewong said:
Yes I know I gotta wipe both cache and data and I done it twice, but still nothing show up.....it is just the blank black screen, no any animation at all...
Sent from my DROID4 using XDA
Click to expand...
Click to collapse
I'm freaking out because mine is stuck on the black screen too... I was trying to flash the XML file for Fastboot. and it just went blank (blackscreen) can someone please help. I don't know if letting the battery die is the way to go? I have it connected to a laptop at the moment. I know they said that the XML file takes a whille, but it has been an hour. I do not have any warranty as this was a trial unit given to me.
I'm not that much of a Noob, but I'm not sure what to do at this point. <<<<---- Fixed using Volume down and Power to do a "battery pull" Although I almost Removed the battery physically.
Can you still boot into the unsafe system?
If so, is the unsafe system currently ICS or Gingerbread?
pieeni age
slosho said:
I'm freaking out because mine is stuck on the black screen too... I was trying to flash the XML file for Fastboot. and it just went blank (blackscreen) can someone please help. I don't know if letting the battery die is the way to go? I have it connected to a laptop at the moment. I know they said that the XML file takes a whille, but it has been an hour. I do not have any warranty as this was a trial unit given to me.
I'm not that much of a Noob, but I'm not sure what to do at this point. <<<<---- Fixed using Volume down and Power to do a "battery pull" Although I almost Removed the battery physically.
Click to expand...
Click to collapse
ICS leaks are not fastbootable.AFAIK, unless you just meant that you were trying to fastboot flash to 6.13.219 before flashing to ICS. Either way, here we go.
Go into safestrap, safe mode menu, then disable safe mode, and restart your droid. I am assuming you at least went into safe mode before trying to flash. If so, this is why we love safestrap...makes sure you have a working OS. Let it boot up. Did it work?
If not, don't panic, there is still another solution, even if you didn't safestrap your unmodified OS (just make sure you do this next time!)
If you did backup and safestrap saved you, ignore this block below for now.
Code:
[LIST=1]Download [COLOR="Red"]VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01[/COLOR].
You might already have this if that's what you were trying to fastboot to. It's 1.18GB in size.
Download is here: sbf.droid-developers DOT org/cdma_maserati/VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01.xml.zip
(change DOT to . Can't post links yet.)
[*]dl.dropbox DOT com/u/76950573/RSDLite5.7.msi Download RSDLite and install it.
[*]Download the Droid USB drivers:
motorola DOT com/Support/US-EN/Support-Homepage/Software_and_Drivers/USB-and-PC-Charging-Drivers
Install them. [COLOR="SeaGreen"][B]RESTART YOUR COMPUTER.[/B][/COLOR]
[*]Turn your phone off.
Hold the two side volume buttons down together, press and hold the power button down.
Hold all 3 down until you get to the bootloader.
Press volume down to get to "recovery", press volume up to select it.
You'll see a sick looking android/red triangle icon soon.
When you do see him, press both volume buttons down at the same time.[/list]
[*]Volume down to "wipe data/factory reset", power button to select (not volume up this time.)
Confirm, delete everything. When it finishes, select "reboot system", press the power key to enter that choice.
Immediately press both volume keys together after the reboot begins and hold them until you see the bootloader menu again.
[*]Plug your USB cable into your phone and connect it to your computer.
Use volume down to select "AP Fastboot", volume up to confirm the choice.
Open RSDLite on your PC.
Press the "....." icon in the program, browse to and select the 1GB+ VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01 you downloaded earlier.
[*]Click "decompress/start flashing". Now wait for half an hour or so.
I believe there will be several phone restarts near the end, this is normal.
You're now back to stock GB. You no longer have to fastboot to this in order to go forward to ICS.[/list].
Now to get to ICS...
Go here. droidforums DOT net/forum/droid-4-hacks/212307-droid-4-utility-updated.html and download the tool. You don't need anything else but the main tool.
Grab your preferred ICS leak. 6.16.217 is the most recent: droidforums DOT net/forum/droid-4-roms/218610-ics-leak-6-16-217-update-zip-boot-img-crc.html
Flash to 6.13.219 if you didn't just do that.(follow the steps in the CODE block above).
Open the droid 4 tool (.bat file) after extracting from the archive. Plug your phone into the USB. Set it to debug mode. Install safestrap 1.09, root the droid.
Unzip D4 6.16.217.zip. Rename boot.img to ICSFIX.img and move it into the droid 4 utility subfolder named \files\
Copy Blur_Version.6.13.219.XT894.Verizon.en.US.zip (leave it zipped.) to your SDcard.
Go into safestrap and make a backup. Turn on safe mode. Reboot.
Reboot into Bootloader, select AP Fastboot. USB should still be connected and the droid utility open. Select option 16. (Errors might occur. This is fine.) Flash your blur.zip from sdcard. Follow prompts on utility. It will reboot, do some animations. When you see the motorola logo, let it do its thing. Once the moto logo fades out, force a reboot (hold VOL keys & power down.) Now hold vol down and press power, boot to bootloader, and select recovery. Press both power buttons when you see the dead sick android logo. Update from sdcard. Select the zip.
Let it flash. It'll reboot.
Open the droid utility. If you flash to another ICS version, UNINSTALL safestrap 1.09, and then install; the new version 2 one. Make backups. Root your phone. Use the last option on the droid utility to flash between ICS versions.
You cannot use it to flash between something like AOKP or CM9 to a normal ICS version (Yes I actually tried this, lol).
Sorry for wall of text, hopefully this helps you in some way, whether you're still bricked, or still want to go to ICS after fixing your brick.
Resources/relevant threads:
droidforums DOT net/forum/droid-4-roms/218610-ics-leak-6-16-217-update-zip-boot-img-crc.html
droidforums DOT net/forum/droid-4-hacks/212307-droid-4-utility-updated.html
droidforums DOT net/forum/droid-4-roms/209130-how-install-leaked-android-4-0-4-ics-build-droid-4-xt894.html
droidforums DOT net/forum/droid-4-tech-support/206972-how-restore-your-motorola-droid-4-xt894-stock-windows-only.html
droidforums DOT net/forum/droid-4-hacks/200945-safestrap-guide-droid-4-a.html
blog.hash-of-codes DOT com/how-to-safestrap
Read those. It'll be good information for you. I can't post links yet, but it's pretty clear they're not spam and only meant to help somebody out <3
Hello, I am a NOOB, and...
I recently rooted my lg g2, vs9803aa, using the one click root, but haven't actually flashed any roms on it. I put autorec on to flash twrp, and also had titanium backup on there i was looking at to try to back it up. I restarted the phone and it is just blank screen now. I try the hard reset and it just buzzes in my hand once and no logo appears on the screen. When i plug it into the computer it generates a bunch of local drives that need formatting, and on device manager it shows as QHSUSB_BULK. I read in other threads that it matters what rom you are using for the possible fix, but i never got as far as flashing one, or recieved an OTA.
Thoughts please?! I really don't want to get a new phone, but at the very least for now I swapped the sim to an old phone, droid 4, for temporary use.
Thanks for any input.
cheetahx42 said:
Hello, I am a NOOB, and...
I recently rooted my lg g2, vs9803aa, using the one click root, but haven't actually flashed any roms on it. I put autorec on to flash twrp, and also had titanium backup on there i was looking at to try to back it up. I restarted the phone and it is just blank screen now. I try the hard reset and it just buzzes in my hand once and no logo appears on the screen. When i plug it into the computer it generates a bunch of local drives that need formatting, and on device manager it shows as QHSUSB_BULK. I read in other threads that it matters what rom you are using for the possible fix, but i never got as far as flashing one, or recieved an OTA.
Thoughts please?! I really don't want to get a new phone, but at the very least for now I swapped the sim to an old phone, droid 4, for temporary use.
Thanks for any input.
Click to expand...
Click to collapse
Hi,
Have you tried download mode? If you dunno how to, here's how :
" press power button and select “power off”. Then, press the volume up button on your LG G2. While you are holding the volume up button, plug in your phone's USB cable. Keep pressing the Volume up button until the download mode is being displayed."
After you are in download mode, follow this guide to go to stock : http://forum.xda-developers.com/showthread.php?t=2432476
This should resolve your issue.
iubjaved said:
Hi,
Have you tried download mode? If you dunno how to, here's how :
" press power button and select “power off”. Then, press the volume up button on your LG G2. While you are holding the volume up button, plug in your phone's USB cable. Keep pressing the Volume up button until the download mode is being displayed."
After you are in download mode, follow this guide to go to stock : http://forum.xda-developers.com/showthread.php?t=2432476
This should resolve your issue.
Click to expand...
Click to collapse
I get no screen prompts whatsoever, it stays black. I can hold the power button for a few seconds and there will be a single pulse of vibration, nothing else. It does the same if I hold volume down and power, as well as volume up and power. I even tried all 3 at the same time, same thing.
cheetahx42 said:
I get no screen prompts whatsoever, it stays black. I can hold the power button for a few seconds and there will be a single pulse of vibration, nothing else. It does the same if I hold volume down and power, as well as volume up and power. I even tried all 3 at the same time, same thing.
Click to expand...
Click to collapse
Let me make it clear. Turn off your phone. Plug your USB on your phone and press & hold volume up button and connect the other and of the usb to your pc.
Just had the same thing happen to me. Installed recovery through autorec and then upon reboot I get a black screen and everything else mentioned above.
maceprimus said:
Just had the same thing happen to me. Installed recovery through autorec and then upon reboot I get a black screen and everything else mentioned above.
Click to expand...
Click to collapse
I figured it out, as long as you don't mind wiping the device.
I used the SRK tool 2.1 to unbrick it. Link to post
After this I could get the LG splash screen again and enter download mode.
Then I used the LG Flash Tool 2014 to flash stock firmware back onto it. I actually downgraded to kitkat with the flash tool since it easier to root that way. Link to post
cheetahx42 said:
I figured it out, as long as you don't mind wiping the device.
I used the SRK tool 2.1 to unbrick it. Link to post
After this I could get the LG splash screen again and enter download mode.
Then I used the LG Flash Tool 2014 to flash stock firmware back onto it. I actually downgraded to kitkat with the flash tool since it easier to root that way. Link to post
Click to expand...
Click to collapse
With the SRK tool I unzip it but the application file doesn't transfer into new file. How did you do it?
maceprimus said:
With the SRK tool I unzip it but the application file doesn't transfer into new file. How did you do it?
Click to expand...
Click to collapse
It was there when i extracted the folder, maybe you need to re-download zip or get it from a different source. I dunno, mind you I am still a huge noob with about a weeks worth of experience trolling the how to/fix guides and no programming skills whatsoever.
cheetahx42 said:
It was there when i extracted the folder, maybe you need to re-download zip or get it from a different source. I dunno, mind you I am still a huge noob with about a weeks worth of experience trolling the how to/fix guides and no programming skills whatsoever.
Click to expand...
Click to collapse
Got it to work. I for some reason had to use my pc in safe mode to keep it from blocking my access to the exe file.
maceprimus said:
Got it to work. I for some reason had to use my pc in safe mode to keep it from blocking my access to the exe file.
Click to expand...
Click to collapse
Maybe you need to go change a setting to show hidden files. I had to do that recently. I am using windows 7, it is in folder options.
Hello. So a while back I got a Fire 7 5th Gen tablet for Christmas. I rooted it using KingRoot downloaded from Chrome, then one day I was so stupid, you know how many places tell you to not install TWRP. Well, I did it anyway, and while booting to it, it shut off for a couple days. When I was finally able to get it back on, well on first hand, I don't think it's in a bootloop, but it will show amazon, the fire goes on longer that normal (about a minute), then after that's done it just shows a blank screen with only a tad bit of light with it. Please, help. I also have a Fire HD 7 that I can't get past the password because I accidentally erased the keyboard and it won't pop up and another fire 7 that will show amazon, shuts off, shows amazon, cuts off, and continues in the same sequence. Any ideas?
Restore the newest firmware.
Pix12 said:
Restore the newest firmware.
Click to expand...
Click to collapse
hi! I have the same problem when my unrooted fire 5th gen suddenly froze and I got black screen, how do i do this?
I'll look for the link after this initial posting and add it after. Download the proper firmware and place the .zip into the same folder as platform-tools (the folder you use to use ADB.) Follow the steps below first, to possibly resolve issues before flashing firmware.
1) power down device. If you can't, press the power button and hold until device turns off.
2) When it's off, first press the volume down button and hold it, then press and hold the power button until the recovery screen comes up.
4) Scroll to 'wipe cache partition.' Select it with the power button. You won't lose any user data or files, yet.
5) Select reboot.
6) If problem is still there, follow steps 1-2 again.
7) Scroll to factory reset and select with power button. You WILL lose all user data and files.
8) Wipe cache partition again (I do this often if I go through resets).
9) Select reboot.
10) If problem STILL persists...Repeat steps one and two. Plug in tablet to PC. Select "make an update vis ADB" or something similar.
11) type: adb sideload xxx.zip (x being the firmware file).
12) That should do it assuming your device is recoverable.
DragonFire1024 said:
I'll look for the link after this initial posting and add it after. Download the proper firmware and place the .zip into the same folder as platform-tools (the folder you use to use ADB.) Follow the steps below first, to possibly resolve issues before flashing firmware.
1) power down device. If you can't, press the power button and hold until device turns off.
2) When it's off, first press the volume down button and hold it, then press and hold the power button until the recovery screen comes up.
4) Scroll to 'wipe cache partition.' Select it with the power button. You won't lose any user data or files, yet.
5) Select reboot.
6) If problem is still there, follow steps 1-2 again.
7) Scroll to factory reset and select with power button. You WILL lose all user data and files.
8) Wipe cache partition again (I do this often if I go through resets).
9) Select reboot.
10) If problem STILL persists...Repeat steps one and two. Plug in tablet to PC. Select "make an update vis ADB" or something similar.
11) type: adb sideload xxx.zip (x being the firmware file).
12) That should do it assuming your device is recoverable.
Click to expand...
Click to collapse
It doesn't pop up on the computer whenever a plug it in + i can't boot it into recovery, attempting to do so will cut it off and it will cut back on.
WilliamTheKingAS said:
It doesn't pop up on the computer whenever a plug it in + i can't boot it into recovery, attempting to do so will cut it off and it will cut back on.
Click to expand...
Click to collapse
See this thread..
If I recall, I don't think a notice pops up when you plug it in in recovery/fastboot. Try plugging it in and let it get a full charge from a wall outlet. Then try to power it back on into recovery while it is still plugged in. Don't plug it into your PC until you get past the recovery screen and select add update from adb. You might have to do that a few times. I had a similar problem on my XT907 phone where it would reboot every time I got into the recovery screen and I eventually was quick enough to get into fastboot to do what I needed.
DragonFire1024 said:
See this thread..
If I recall, I don't think a notice pops up when you plug it in in recovery/fastboot. Try plugging it in and let it get a full charge from a wall outlet. Then try to power it back on into recovery while it is still plugged in. Don't plug it into your PC until you get past the recovery screen and select add update from adb. You might have to do that a few times. I had a similar problem on my XT907 phone where it would reboot every time I got into the recovery screen and I eventually was quick enough to get into fastboot to do what I needed.
Click to expand...
Click to collapse
No, like I can't get into recovery AT ALL.
Pix12 said:
Restore the newest firmware.
Click to expand...
Click to collapse
I can't get into recovery to do so
WilliamTheKingAS said:
I can't get into recovery to do so
Click to expand...
Click to collapse
I would wait and see if anyone else comments. I have not yet had the unfortunate experience of being totally cut off from recovery. Sorry I couldn't help
I've even tried talking Amazon to giving me a replacement. I'm pretty sure his name was Ajit and he said I was off the 90 day warranty, so sadly I don't even know what to do. I did learn something though. Whilst trying to boot it into recovery it becomes stuck on the Amazon logo. What if it's in recovery, but just not showing any recovery screen. This is all I know what I can do??
So m
So my theory is that there is access to recovery, but when you're in it, it only shows Amazon until you force it off. Could this possibly help anyone fix their own fire 7 5th gen. Because if you find out anything hit me with it. It could be helpful to others reading this post.
WilliamTheKingAS said:
No, like I can't get into recovery AT ALL.
Click to expand...
Click to collapse
There is no recourse if you can not access the 'stock' recovery environment. The persistent Amazon logo simply indicates the device is stuck in the early stages of booting. Sorry for your loss.