Database Develop

[Q] Rooting a Stock ROM

Hi to all
I wish to root my Note (GT-N7000) and am trying to follow the method described in Dr Katan's post here.
Download the [CWM zip] and put in your Ext SDCARD ] And [ SUPERSU-Busybox-Installer.zip] to SD card (internal memory)
Reboot to recovery.
Choose apply update from external storage. (use vol up/down to select, power to enter)
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard (Now use touch function to select choice)
Choose and Install SUPERSU-Busybox-Installer.zip
Reboot
You are done and now your device is Rooted
Click to expand...
Click to collapse
I am running the following stock ROM:-
Android Version
4.0.3
Baseband Version
N70000XXLPT
Kernel Version
3.0.15-N7000XXLQ2-CL605927
[email protected] #3
Build Number
IML74K.XXLQ2
When I hold the power button, I don't see any 'Recovery' option (The only options are 'Silent mode', 'Data network mode', 'Flight mode', 'Power off' and 'Restart'). What am I missing/doing wrong..?
Many thanks to anyone who can help.
PS. Apologies for posting this in the Q&A section. I'm relatively new so can't yet make a post in the relevant development thread.

only custom ROM users get the APM (advanced power menu)
you will have to do it manually, Power off the phone and hold volume UP + Home + Power all at once
let go when you see the GT-N7000 screen

azzledazzle said:
only custom ROM users get the APM (advanced power menu)
you will have to do it manually, Power off the phone and hold volume UP + Home + Power all at once
let go when you see the GT-N7000 screen
Click to expand...
Click to collapse
Thankyou VERY much. I did it, but haven't tried the rooting procedure yet. In the recovery menu, I saw a message about CSC being successfully applied. What does this mean...?

not sure what CSC stands for but it happens to us all, Dont worry about it, Its a good thing that it was applied successfully

Csc is country sales code. And yes as azzledazzle said, its normal to see that message.
Sent from my GT-N7000 using xda premium

I have now run into a few problems and would be very glad for some advice.
I have tried to root following the instructions below in the OP.
Download the [CWM zip] and put in your Ext SDCARD ] And [ SUPERSU-Busybox-Installer.zip] to SD card (internal memory)
Reboot to recovery.
Choose apply update from external storage. (use vol up/down to select, power to enter)
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard (Now use touch function to select choice)
Choose and Install SUPERSU-Busybox-Installer.zip
Reboot
You are done and now your device is Rooted
Click to expand...
Click to collapse
All went well (or so I thought) but I have 2 problems:-
I don't think I'm properly or fully rooted. After following the above steps, I installed Mobile Odin Pro (v2.45) and attempted to flash CF-Root-SGN_XX_XEU_LQ2-v5.6-CWM5.zip. I extracted the tar file, placed it on the external SD card and ran it using Mobile Odin Pro. However, upon rebooting, I see that my baseband, kernel version, build no. etc. are still showing exactly the same info in the 'About phone' section under Settings, ie.
Android Version
4.0.3
Baseband Version
N70000XXLPT
Kernel Version
3.0.15-N7000XXLQ2-CL605927
[email protected] #3
Build Number
IML74K.XXLQ2
Is this normal or have I missed an important step? I saw on another thread that perhaps I should have extracted both the tar and zimage files from the CFRoot zip, and then flashed? If so, could someone kindly tell me exactly what to do. For info, SU seems to have installed ok and has granted the necessary permissions to CWM and Mobile Odin Pro as root apps but I can't get into or use either app. What am I missing or doing wrong?
After rebooting, I can no longer use Mobile Odin Pro so cannot attempt a proper flash of whatever kernel I should be using. I can mostly now not get past the 'Loading...Checking SuperUser support...' splash screen. During this period, I see a pop-up which confirms the app has been 'granted SuperUser permissions for an interactive shell'; this pop-up usually appears several times during this loading period. Very occassionally, it gets past the Loading screen but then stays for an equally lengthy time at the next 'Loading...Detecting device model...' screen. If it gets past that, it then fails to detect any device model so I cannot use the app. What am I doing wrong? I've tried rebooting several times - no joy. I've tried uninstalling and then reinstalling the app - again, no joy.
If anyone can help me out of my rooting misery, I'd be really grateful.
One more thing - I'm not completely clear how I revert to/reinstall a stock ICS ROM once I am properly rooted or from where the phone is now? Can someone please just clarify this for me.
Apologies for the long post - just wanted to give as much information as possible.
Many thanks to all who can help

im not so sure but when you installed cwm and buzybox you did so to flash a custom rom
if you flash a custom rom you will keep the phone root and so on (supersu ecc...)
else you loose partially the root and you need to reflash the apps you lost on rebbot
so choose good cutom ics and go for it
you might try cssie xlite....180 mega
or Rocket Rom 7 700 mg
both work well
p.s. never full wipe or factory reset on ics cfroot kernell....
just do t with abyss kernel 4.2 if you need it and read about eemmmc bug crack
p.s.2 look for drkeatan posts and chasmodo....they made good walkthrough pro

lorekarf said:
im not so sure but when you installed cwm and buzybox you did so to flash a custom rom
if you flash a custom rom you will keep the phone root and so on (supersu ecc...)
else you loose partially the root and you need to reflash the apps you lost on rebbot
so choose good cutom ics and go for it
you might try cssie xlite....180 mega
or Rocket Rom 7 700 mg
both work well
p.s. never full wipe or factory reset on ics cfroot kernell....
just do t with abyss kernel 4.2 if you need it and read about eemmmc bug crack
Click to expand...
Click to collapse
Thanks for the reply. I only rooted in order to use certain root apps (Root Explorer, Titanium Backup etc) and was under the impression that the CF-Root-SGN_XX_XEU_LQ2-v5.6-CWM5.zip was basically a slightly modified stock ICS ROM with CWM included..?

largeruk said:
Thanks for the reply. I only rooted in order to use certain root apps (Root Explorer, Titanium Backup etc) and was under the impression that the CF-Root-SGN_XX_XEU_LQ2-v5.6-CWM5.zip was basically a slightly modified stock ICS ROM with CWM included..?
Click to expand...
Click to collapse
The way I've always rooted is to run the adb script on a gb from, can be found in dr K's post. You need to be rooted before you can flash cwm kernel, 2 separate processes (although combined in some scripts.
There is also a thread somewhere with pre-rooted stock roms, so you could flash one of those as normal with PC Odin and then flash cwm kernel. Might be easier.
Sent from my GT-N7000 using xda premium

i don't know....

hi guys!
im new to Galaxy Note (GT-N7000 - unlocked and root-ed), and i like this phone, a lot!
you can see in pictures below the details of my phone.
http://imageshack.us/photo/my-images...sc00001xg.jpg/
http://imageshack.us/photo/my-images...sc00002cl.jpg/
BUT, i want a new and good safe kernel (maybe a little overclock) and a good ROM.
what and how, because i'm afraid of bricking it

christty31 said:
hi guys!
im new to Galaxy Note (GT-N7000 - unlocked and root-ed), and i like this phone, a lot!
you can see in pictures below the details of my phone.
http://imageshack.us/photo/my-images...sc00001xg.jpg/
http://imageshack.us/photo/my-images...sc00002cl.jpg/
BUT, i want a new and good safe kernel (maybe a little overclock) and a good ROM.
what and how, because i'm afraid of bricking it
Click to expand...
Click to collapse
Re: New good and safe kernel:- Go Here and download PhilZ-cwm6-DDLR9-INU-2.5-signed.zip. Put it onto your external SD card and just flash it. It is stock kernel BUT with brickbug removed (So no overclocking, but is latest and performs better than some custom kernels). It also has CWM recovery which also blocks bricking commands so it is DOUBLE SAFE! You can also change bootanimation with this kernel. Bear in mind it works only on TW ROMs based on stock ICS, So no PA CM9, CM10 etc.
What are u looking for in a "good" ROM? Fancy? Similar to stock? Trimmed down? What is ur preference?

thanks for your answer...
did you see my pictures? is it safe to change it?
i want a ROM with good battery management, and good stuff in it, because i love this phone

christty31 said:
thanks for your answer...
did you see my pictures? is it safe to change it?
i want a ROM with good battery management, and good stuff in it, because i love this phone
Click to expand...
Click to collapse
Saw ur pictures on Chasmodo's thread (before he shut u down )
Looks like u are on Kingdroid with Speedmod kernel, is that right?
BTW. Ur links are broken coz u did "copy and paste". U need to use the insert link tool (the thing that looks like a couple of chain links)

ok, i put again the pics...
http:////imageshack.us/photo/my-images/546/dsc00001xz.jpg/
http:////imageshack.us/photo/my-images/853/dsc00002tx.jpg/

Just had another look at ur Pics. Your currently on a "safe" but slightly outdated kernel. I would still flash Philz (Double Safe remember?) Sounds like u want a cool ROM with lots of bells and whistles. Try Alliance

aha...
so it's ok to flash another good kernel and a ROM...
how to do it? in a safe way....
sorry if i put so many questions, but i don't want to mess up my beloved phone.....

christty31 said:
aha...
so it's ok to flash another good kernel and a ROM...
how to do it? in a safe way....
sorry if i put so many questions, but i don't want to mess up my beloved phone.....
Click to expand...
Click to collapse
OK, so
1) Copy philz kernel and alliance ROM to external SD card
2) Reboot into recovery (vol up+Home+power)
3) Select install zip from SD card and then "choose zip from sdcard"(some kernels have it wrong way round so u may need to select choose zip from "internal" SD card)
4) Select PhilZ-cwm6-DDLR9-INU-2.5-signed.zip and flash.
5) Select advanced and reboot into recovery.
6) U are now on Philz double safe kernel.
7) Go to Wipe Data/Factory Reset and select "yes.... delete all user data"
8) Go back and select Wipe cache partition and Wipe cache
9) Go to advanced and select Wipe Dalvik Cache "Yes.. Wipe Dalvik Cache"
10) Go back (twice) and select Mounts ans Storage and select format /system "yes - format"
11) Anything that says "mount" - do it ( except mount usb storage)
12) Go back and select install zip from sd card same as before.
13) go to new ROM and select it and "yes - Install ....
14) Wait for installation to complete then go back twice and "reboot system now"
15) Phone will take a while to set up so be patient.
16) "Ficeto" Kernel u are now on should also be safe. (just stay on it while on this ROM in case of compatibility issues)
17) Press thanks button on my posts (just joking)

thanks for info....
but....what Philz kernel version? why PhilZ-cwm6-DDLR9-INU-2.5-signed.zip ?
and in Philz topic it said flash with Odin....
offff.... too many thing i'm not sure about....

christty31 said:
thanks for info....
but....what Philz kernel version? why PhilZ-cwm6-DDLR9-INU-2.5-signed.zip ?
and in Philz topic it said flash with Odin....
offff.... too many thing i'm not sure about....
Click to expand...
Click to collapse
Coz it can be flashed in recovery (even Stock!) - no need for Odin (that is for TAR version only). Also LR9 is Faaast:good:

in the original post of the kernel there are versions for all ROMs . so select it for ur rom and install it. as its a stock kernel it can be flashed from the stock recovery 3e as well.. Odin as well. any that suits u
Sent from my GT-N7000 using xda premium

i don't know which is for my ROM....
i want to put Alliance ICS...

check it by going to settings> about phone
check the baseband, kernel and build number..
that is ur rom
Sent from my GT-N7000 using xda premium

Looks like kingdroid LRQ, but don't worry! PhilZ-cwm6-DDLR9-INU-2.5-signed.zip will work fine - backwards compatible with older ROMS!

so...first flash the kernel and the the ROM?

Thats it (follow instruction I gave tho)
Sent from my GT-N7000 using xda app-developers app

[Q] How to install CWM manually

Hi all,
I want to install CWM on my rooted SGS however there appears to be on CF Kernel that matches my JVN Kernel so using the CF method is not an option from what I have read.
So I installed ROM Manager and tried to install it that way but I now get signature verification errors when I go into Recovery.
Next I downloaded the recovery image from the CWM website but I cannot seem to find any information on installing it onto a SGS.
If anyone could offer any suggestions it would be appreciated.
TIA
Greg
Edit: Firmware is 2.3.3

Why dont you just flash JVU then Root it
Comes with CWM ....
As I am guessing you want CWM to flash a rom yes?
If so most Roms require ...from my knowledge a clean install of JVU with ODIN before flashing a New Rom

ghines said:
Hi all,
I want to install CWM on my rooted SGS however there appears to be on CF Kernel that matches my JVN Kernel so using the CF method is not an option from what I have read.
So I installed ROM Manager and tried to install it that way but I now get signature verification errors when I go into Recovery.
Next I downloaded the recovery image from the CWM website but I cannot seem to find any information on installing it onto a SGS.
If anyone could offer any suggestions it would be appreciated.
TIA
Greg
Edit: Firmware is 2.3.3
Click to expand...
Click to collapse
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.

You need to root your phone first with update.zip for i9000, download the latest CWM.zip, put it in the storage. Then go to recovery and install the CWM.zip Goodluck flashing!

EwOkie said:
Why dont you just flash JVU then Root it
Comes with CWM ....
As I am guessing you want CWM to flash a rom yes?
If so most Roms require ...from my knowledge a clean install of JVU with ODIN before flashing a New Rom
Click to expand...
Click to collapse
Can you use any version of JVU? eg: Europe, Asia, Australia. Or, should you only use one for your region, in my case Australia.
I have an Australian verion of JW6 (2.3.6), would that be acceptable?
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
Click to expand...
Click to collapse
Thanks for the UPDATE.ZIP, I note it is just a renamed CWM. I did not know you could just rename them and then install them. Thanks.
So, my plan at this stage is to update to 2.3.6 (JW6) and then install CWM via UPDATE.ZIP. Should this work?
TIA
Greg

Yeah you can upgrade first. Flash a firmware or upgrade OTA. You should root your phone first before flashing a custom recovery such as CWM.
Sent from my GT-I9001 using xda premium

[Q] Help restoring my rooted Galaxy Note n7000 to stock status.

Hi there,
I have a rooted Galaxy Note N7000 running JellyBean 4.1.2. and I've got a ton of apps/photos/videos/messages... etc.
and I've sensed the phone is getting slow. I've removed all the unnecessary apps and deleted photos/videos etc..
but its still slow.
so anyway I decided to start from scratch, I decided to unroot the phone and install a stock rom. delete all photos/videos/apps.. everything.
so I downloaded the official latest stock rom released from samsung for my region. (N7000JPLSB_N7000OJPLSB_XSG)
and I've looked at many many pages on the internet and some site different methods than other, which got confusing.
finally i decided i'd go with the method mentioned in this page:
rootgalaxynote(dot)com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
(sorry for the link formatting it wouldn't let me post a url)
the problem is, at the end of the page it says to do a “Wipe data/factory reset”. However, I have read on many sites and threads that you should never do a factory reset on stock Rom!
So now i'm confused.
1- is the method mentioned in the page i linked above correct and safe?
2- will the method above delete everything? ie: photos/videos/apps.. etc (which is what i want) if not, how do i achieve that?
3- do i do a Wipe data/factory reset? or not?
Thanks in advance.

What's your current config?

nokiamodeln91 said:
What's your current config?
Click to expand...
Click to collapse
sorry i don't understand. i'm really new to this. What do you mean by current config?

What rom are you running and what kernel. Rooted.

1.Download a stock rom for n700
2.Install odin on your pc
3.Go to download mode by pressing the vol + , power button + center button
4.press vol +
You are in odin flash mode for ur mobile.
Open odin on ur pc
Check if ur phone is detected. If the upper box is yellow and it shows a COM usb port.
Browse the stock rom file a .tar.md5 file in the PDA section let everything as it is.
Press flash and wait and note things happen.
The yellow box will turn green with PASS written on it.
Reboot ur phone.
A simple how to
Sent from my GT-N7000 using xda app-developers app

Right. Here my info:
Baseband Vesion: N7000XXLSO
Kernel Version: 3.0.31-906407 / [email protected] #3 / SMP PREEMPT Tue Feb 19 22:05:07 KST 2013
Build Number: JZO54K.N7000JPLSB

Flash Philz kernel and boot into cwm recovery. The go to mounts and storage and format system, data, cache and preload. This will completely erase the trace of old system. Then go back to advanced menu and choose reboot download. Then flash the rom as per reply by above member.
Before doing this just make sure you have a working usb connection because after the steps there won't the any rom on phone to boot till you flash the new now.

nokiamodeln91 said:
Flash Philz kernel and boot into cwm recovery. The go to mounts and storage and format system, data, cache and preload. This will completely erase the trace of old system. Then go back to advanced menu and choose reboot download. Then flash the rom as per reply by above member.
Before doing this just make sure you have a working usb connection because after the steps there won't the any rom on phone to boot till you flash the new now.
Click to expand...
Click to collapse
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?

To boot in CWM, you shut down your Note. And then you press Vol-, Home and Power for recovery Mode.

bakkouz said:
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?
Click to expand...
Click to collapse
Recovery mode is a mode in which you have control on Android file systems, internal and external SD cards. It run without Android.

Thanks, about the Kernel though.. as I said I found the page regarding Philz kernel, but there are so many of them i really don't know which one to download. there are so many threads intertwined it get really confusing.
is it the one in here:
http://forum.xda-developers.com/showpost.php?p=31911682&postcount=3
should i download the JPLSB one? will this root my phone (again?) cause i don't want it rooted.
should i even download the kernel? i mean do i really need to? is it because my current kernel will cause problems?

bakkouz said:
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?
Click to expand...
Click to collapse
1 - Flash Philz kernel
2 - Go to Recovery Mode
3 - Go on "Mount & Storage"
3 - Format ALL ! (Data, Cache, System, Emmc etc ...) Save whant you want to save before.
4 - Go in Advanced, Format Dalv. cache.
5 - Shut down your phone (remove your battery)
6 - Turn on your note in Odin Mode (Vol+, Home & Power)
7 - Flash your last Touchwizz stock rom with Odin.
I'm French, I've do this manip, I'm on XXLT4 full stock. Fast & Economic. (2,5 days)

KalamiGeek said:
1 - Flash Philz kernel
Click to expand...
Click to collapse
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?

bakkouz said:
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?
Click to expand...
Click to collapse
Check .tar.md5
Find Odin v3.04. Put philz kernel .tar.md5 on Pda case. And flash it

bakkouz said:
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?
Click to expand...
Click to collapse
Yes, use tar.md5 file with Odin PC as previously shown.
That file is Philz kernel and add ROOT by default. To avoid root add, use philz_installer.cfg as indicated in the Philz thread.

Ok great, thank you for all the help.
i just hope i don't brick the phone

HI just one last fast question please...
as for philz_installer.cfg it says to put it in /sdcard/clockworkmod/philz_installer.cfg
but i don't have a clockworkmod folder.
should i create it? or put on directly on /sdcard main folder?

Don't use the tar file. It will cause a yellow triangle. Use the zip version. Place it on external sd card. Don't worry about cfg file for now. Boot into recovery and choose apply update from external storage. Choose the zip and flash. After it completes, click on reboot system. The again boot into recovery and you should see cwm

nokiamodeln91 said:
Don't use the tar file. It will cause a yellow triangle. Use the zip version. Place it on external sd card. Don't worry about cfg file for now. Boot into recovery and choose apply update from external storage. Choose the zip and flash. After it completes, click on reboot system. The again boot into recovery and you should see cwm
Click to expand...
Click to collapse
I've often used Odin PC to flash new ROM's, for example Stock LT4 and Stock LT5, no problem, no yellow triangle. To avoid it in the future, please explain when and why we get the trouble triangle yellow. Thanks.:good:

you will get a yellow triangle if you flash anything else that stock roms using PC odin. you will also get an increased counter. nothing to worry if you are out of warranty though

[Q] How to get TWRP or CWM ? [Xperia V 9.1.A.0.490] [Solved]

Hello. i have tried to get my mobile modded this hole day and now i only need CWM or TWRP...
My mobile is:
JB
Android-version 4.1.2
Kernel-version 3.4.0-DooMKernal
Version 9.1.A.0.490
Mobile is Rooted and got SuperSu and Busybox...
Is there someone who can lead me to the right direction or even maby can help me personally ?
I'm doing this question thread only cuz i have ran out of options so please help !!!

I would suggest using PhilZ Touch (based on CWM) as CWM isn't maintained anymore for our devices. See http://forum.xda-developers.com/showthread.php?p=50524063 for instructions
Sent from my LT30p using xda app-developers app

Mad Marty said:
I would suggest using PhilZ Touch (based on CWM) as CWM isn't maintained anymore for our devices. See http://forum.xda-developers.com/showthread.php?p=50524063 for instructions
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...

Solution
LilleJohn said:
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...
Click to expand...
Click to collapse
I got it to work by flashing another kernel that does not work to boot up the phone thou it can come in so i can flash zip files.
After that i flashed the FTF kernel file that i hade from the begginning and now i got thePhilZ Touch 6
Thanks for the tip about the Philz Touch kernel anyways thou it did not work just to follow the instructions of that thread...

LilleJohn said:
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...
Click to expand...
Click to collapse
No need to shout at people when you want them to help you...
You should not reboot at step 5 (using the app), but in stead read step 6 and reboot normally (powerbutton -> shutdown/reboot -> start device). You don't automatically enter recovery upon reboot, and remember, recovery is not an app. When booting, press the volume up button when the LED turns pink, if you installed correctly you will enter recovery.