Database Develop

[Q] How can i change the Kernel in NOTE?

I'm a x10 user who changed the kernel, baseband and of course ROM of my little 4 inch x10... all with xrecovery and flashtools.
I'm now with the wonderful Galaxy NOTE and I read that here I should use CMW, stock recovery and other like ROM manager.
but I haven't seen anything that matches with my kernel KJ8... so
can I change my kernel to KKA OR KK8 OR SOMETHING ELSE???
IF THAT'S THE CASE... HOW DO I DO THAT?
THANKS 4 READING AND LOT OF THANKS 4 ANSWERING ME...

yes you can use a kka or kk9 kernel without a problem.
First you need to root and accordingly flash a kernel.
In developer section you can find how to do so.
Sent from my GT-N7000 using xda premium

THANKS
I'VE ROOTED MY NOTE. EVEN I'VE INSTALLED THE CWM RECOVERY.... I FOUND THIS TRHEAD
http://forum.xda-developers.com/showthread.php?t=1371007
BUT THERE'S NO "HOW TO"
CAN U TELL ME PLZ??
THANKS 4 ANSWERING ME X:3

Enough with the capslock.
1. Boot into recovery.
2. From recovery mode, select wipe cache partition
3. Installed zip from SD card
4. Navigate to the kernel and select it to flash it
5. Reboot

Never under any circumstance flash the KK8 Kernel just yet since there's no way to ROOT it.
@georgegon60 You mentioned that you where on KJ8 and that's why you could ROOT it.
Cheers!
Rayan

georgegon60 said:
THANKS
I'VE ROOTED MY NOTE. EVEN I'VE INSTALLED THE CWM RECOVERY.... I FOUND THIS TRHEAD
http://forum.xda-developers.com/showthread.php?t=1371007
BUT THERE'S NO "HOW TO"
CAN U TELL ME PLZ??
THANKS 4 ANSWERING ME X:3
Click to expand...
Click to collapse
1(a).check if u already have an app called "cwm" installed on your phone. If yes, click on app and reeboot to recovery.
1(b).If there is no cwm app,switch off your phone.wait for 10sec.press volume up+power+menu buttons and hold them untill the phone boots into recovery.
2.using volume buttons scroll down to install zip from sdcard
3.click menu button
4.navigate to path where you have placed the kernel zip file.
5.click menu button
..let the phone do its work..
..after it had finished, go back and reboot..
its done.. enjoy..

eMMC safe TW ROM?

I am looking for an eMMC safe ROM. I just bought a GT-N7000, I had the i717 before this one. I've been baffled at trying to find information on what is safe to flash, how to flash it, and what isn't safe to flash. I am currently running CM10, but I'm having issues with the GPS, etc, not to mention I would love to use the S-Pen again. Is there a thread that gives all of the information about what I can/can't flash and not brick my phone? I've searched, but everything I've found doesn't say anything about the eMMC bug.
I apologize in advance if this is something that's common knowledge, it's just that I am new to the GT-N7000.
Thanks,
Rob

u need a custom kernel to make ur TW rom emmc brick free
eg
philz
hydracore
speedmod

nokiamodeln91 said:
u need a custom kernel to make ur TW rom emmc brick free
eg
philz
hydracore
speedmod
Click to expand...
Click to collapse
So, let me get this straight. You would flash the kernel and ROM through ODIN?
Thanks,
Rob

Kernels are flashed through ODIN or CWM, ROMs are flashed through CWM (or ODIN if its stock firmware)
Anyway, Your on CM10 now, So your obviously rooted with CWM too, So just simply download a safe kernel (I HIGHLY recommend HydaCore cuz' its awesome ) then download ROM of your choice.
2 ROMs I would recommend to try (this is completely down to my likings) are:
CleaNote (Made by same awesome dev as HydraCore kernel) Completely stock ROM but with all the crap removed - Design for Stock look and feel, But super stable and fast !
RocketMIUI - Made by an awesome dev who also makes RocketROM - This is MIUI ROM, Highly customisable, great theming and tweaks packed full of cool goodies and apps, But also keeps the S-Pen features and apps (such as SNote , SMemo etc etc) Also, Battery life is fantastic (Im getting just short of 2 full days ! )
Once you've chosen your ROM + Kernel, Place them on your SD card, Boot into recovery, flash the safe kernel, Go to advanced menu and select reboot recovery.
Now, Do a full factory reset, along with cache and dalvik cache (under advanced) then go to 'Install zip from sd card' then 'Choose zip from sd card' Then select your ROM
Leave the phone to do its magic and once completed, select 'reboot now' and enjoy
** First boot can take upto 10 mins - dont panic if you think its not booting, Just give it time. Also, DONT forget to do a backup before doing any of this, Either a full Nandroid backup and/or a titanium backup **
Best of luck :good:

excellent explanation

azzledazzle said:
Kernels are flashed through ODIN or CWM, ROMs are flashed through CWM (or ODIN if its stock firmware)
Anyway, Your on CM10 now, So your obviously rooted with CWM too, So just simply download a safe kernel (I HIGHLY recommend HydaCore cuz' its awesome ) then download ROM of your choice.
2 ROMs I would recommend to try (this is completely down to my likings) are:
CleaNote (Made by same awesome dev as HydraCore kernel) Completely stock ROM but with all the crap removed - Design for Stock look and feel, But super stable and fast !
RocketMIUI - Made by an awesome dev who also makes RocketROM - This is MIUI ROM, Highly customisable, great theming and tweaks packed full of cool goodies and apps, But also keeps the S-Pen features and apps (such as SNote , SMemo etc etc) Also, Battery life is fantastic (Im getting just short of 2 full days ! )
Once you've chosen your ROM + Kernel, Place them on your SD card, Boot into recovery, flash the safe kernel, Go to advanced menu and select reboot recovery.
Now, Do a full factory reset, along with cache and dalvik cache (under advanced) then go to 'Install zip from sd card' then 'Choose zip from sd card' Then select your ROM
Leave the phone to do its magic and once completed, select 'reboot now' and enjoy
** First boot can take upto 10 mins - dont panic if you think its not booting, Just give it time. Also, DONT forget to do a backup before doing any of this, Either a full Nandroid backup and/or a titanium backup **
Best of luck :good:
Click to expand...
Click to collapse
So, just to be sure of what I'm doing here. Let's say I flash Cleanote, if I wanted to go back to CWM so long as I have a safe kernel installed I shouldn't have to worry about an eMMC brick, correct?
Thanks Again,
Rob

CWM is recovery, You will have it for as long as you use custom roms.
The brickbug only exists in stock ics kernels, so as long as you avoid using them you will be fine, plus, once you try hydracore you wont use anything else and hydracore is 110% safe so always use it when performing full wipes ect :good:

Sorry to steel your thread but my doubt is i rooted my note using supersu in zip format from recovery, now what i know is i dont have a CWM installed, so should i install it to flash a safe kernel or can i do it from the recovery mode?
Sent from my GT-N7000 using xda premium

digital4282 said:
So, just to be sure of what I'm doing here. Let's say I flash Cleanote, if I wanted to go back to CWM so long as I have a safe kernel installed I shouldn't have to worry about an eMMC brick, correct?
Thanks Again,
Rob
Click to expand...
Click to collapse
or u can just be on stock ICS Rom with Hydracore 5.4 kernel installed which works very well too.
---------- Post added at 11:22 PM ---------- Previous post was at 11:19 PM ----------
Suresh_k said:
Sorry to steel your thread but my doubt is i rooted my note using supersu in zip format from recovery, now what i know is i dont have a CWM installed, so should i install it to flash a safe kernel or can i do it from the recovery mode?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
download the Philz kernel and install it from the recovery. it is a safe kernel and u will get permanent CWM v6
http://forum.xda-developers.com/showthread.php?t=1901191

Can anyone answer me pls i have some more questions left
Sent from my GT-N7000 using xda premium
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
Ok thanks for the reply, if i flash phizl kernal can i update to jellybean without any problem once i get the OTA update
Sent from my GT-N7000 using xda premium

azzledazzle said:
CWM is recovery, You will have it for as long as you use custom roms.
The brickbug only exists in stock ics kernels, so as long as you avoid using them you will be fine, plus, once you try hydracore you wont use anything else and hydracore is 110% safe so always use it when performing full wipes ect :good:
Click to expand...
Click to collapse
I think it was the Galaxy S3 that I had that the kernel had CWM built into it. That's why I was thinking when you changed the kernel you had CWM installed too. So the note has a separate recovery partition?
Thanks Again,
Rob
PS: I really appreciate the help. It's frustrating for someone who hasn't had the international note during the eMMC era to flash things. Bricking this phone would break my heart, lol.

Suresh_k said:
Can anyone answer me pls i have some more questions left
Sent from my GT-N7000 using xda premium
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
Ok thanks for the reply, if i flash phizl kernal can i update to jellybean without any problem once i get the OTA update
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
OTA sometimes dont work if ur device is rooted.. it only happens on stock kernel and stock recovery.. but u can update it via kies. or with pc odin. if u want OTA then u have to go back to stock kernel and unroot
---------- Post added at 11:41 PM ---------- Previous post was at 11:32 PM ----------
I think it was the Galaxy S3 that I had that the kernel had CWM built into it. That's why I was thinking when you changed the kernel you had CWM installed too. So the note has a separate recovery partition?
Click to expand...
Click to collapse
i guess that s3 also had a custom kernels cuz the stock kernel will never have CWM as its a custom recovery.
when u change to a custom kernel, it will mostly have CWM builtin

Why do we actually need a CWM when we have recovery mode, sry if its a noob question
Sent from my GT-N7000 using xda premium

Suresh_k said:
Why do we actually need a CWM when we have recovery mode, sry if its a noob question
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its mainly for flashing custom ROMs and do advanced tasks as the stock recovery dont offer such facilities.
more over ICS kernel is not safe even to do a factory reset. so if ever ur becomes slow and u want to do a factory reset u risk ur phone.
so better install a safe kernel and all safe kernel comes with clockworkmod recovery and its safe to do a reset

I guess safe to reset is related to kernel not to CWM? Why do we actually need to replace our recovery?
Sent from my GT-N7000 using xda premium

its mainly for flashing custom ROMs and do advanced tasks as the stock recovery dont offer such facilities.

Suresh_k said:
I guess safe to reset is related to kernel not to CWM? Why do we actually need to replace our recovery?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
As far as I remember, there r 2 EMMC erase things..one related to the kernel & other one related to the recovery..below text is from one of Ketan's post here.. http://forum.xda-developers.com/showthread.php?t=1894293&page=5
"Originally Posted by dr.ketan
New safe kernel on the way
I have tested kernel. This kernel won't universal for all but just like Cf kernel. It will be according ROM. B'coz here there is no other modification from stock kernel but just made it safe by removing mmc_erase_cap command.
This is stock kernel but binary patched with MMC_CAP_ERASE removed from both recovery as well kernel
Best thing is you can flash with stock recovery and also gives root.
So anyone want to test let me know."

[Q] camera not working galaxy note

Yes I know I am a NOOB at 46 but I still can't resist messin with **** that isn't broken. Loved the NOOB video.
The probem is I think I flashed a dodgey ROM app and got scared half way through and tried to reset the phone to factory.
This is my Galaxy Note GT n7000. I have done a factory reset 3 times and believe I am well on my way to bricking my phone if I do this again.
All is good so far except the CAMERA.
I have downloaded the necessary HOTFILE STOCK ROM for NZ from your site but am now scared ****less to flash it.
Should I just give it back to the manufacturer and say DUH I DONT KNOW WHAT HAPPENED and let them fix it
I also have GINGER BREAD 2.3.6 ROM Should I just flash this and hope for a fix
I also have ICS 4.0.4 XXLRG Should I Flash this after 2.3.6
Just need a little help and direction, as this is all quite new to me. Yes I'm sure this has all been done before and as I yell at my kids for doin stupid **** you deserve the same latitude.
Cheers ****

flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2

you can go ahead and flash ICS 4.0.4 but donot do a factory reset on stock recovery/kernel..

Camera
abhinav quietly brilliant said:
flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, but if you look at the other reply it says to flash ics and NOT to do a FACTORY reset and you say to do the factory reset what is the risk of doing the factory reset
Not to sure which version of PHILZ modified Kernel to use Can you help with this

If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.

nokiamodeln91 said:
If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.
Click to expand...
Click to collapse
Thank you for your help. I have fixed the camera with the GB update and went on to update ICS XXLRG, but this still isnt CwM.
Im not sure which Cwm to use There is an XXLSC-XJB which is close. Should I use this one or does it matter
. PhilZ files were unavailable for download as well is there another place to get this file and what is the easiest method to install

Choose as per your rom build number.

nokiamodeln91 said:
Choose as per your rom build number.
Click to expand...
Click to collapse
My wuild number after flashing ICS is IMM76D.XXLRG but nothing is the same the clsing osest on Philz is XXLSC XJB
Could I flash this using ODIN from my laptop?
Thanks
PS where is the thank you button for my responses I like to say thanks but cant seem to find where

You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery

nokiamodeln91 said:
You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery
Click to expand...
Click to collapse
Thanks again
I used modified ICS kernel PhilZ cwm6 XXLRG DBT 3.99 signed zip version but when I boot from SD it stops and says that it can't verify the signature and wont install
Do I need and unzip app? If I install this update will I have root access to run apps like Titanium Backup?
Or should I use the tar file in ODIN?
I do appreciate all your time and effort

What option did you select in recovery?
This is what you need to follow
1. Download the signed zip version of the kernel and place in external sd.
2. Boot into recovery and choose "apply update from external storage".
3. Choose the file you downloaded.
4. It will do the magic.
This will give you root access and yes apps like TB can be used. Also you will get CWM and it's a safe kernel too.

Dude he has done everything correct i know.. The v.3.99 of ics kernels are not built correctly when you flash them in stock ics recovery they always give a verification failed error.. But the older versions are ok to be flashed in stock ics recovery
Sent from my GT-N7000 using Tapatalk 2

I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?

Use the tar method only if u are confident enough
And yes you will be able to run applications like titanium backup
And for the flash counter just use triangle away
Search Google for it
All is well that ends well

nokiamodeln91 said:
I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?
Click to expand...
Click to collapse
Read some comments on the thread and i too have faced that.. But i guess philz has corrected his kernels they are installing now..
Sent from my GT-N7000 using Tapatalk 2

[Q] from rooted version 2.2 to rooted version 4.0 or more?

Hi,
I was redirected to this part of the forum. A friend of mine rooted my samsung mobile Galaxy S I9000 with a android 2.2 version. I cannot contact him anymore to help me with the update and I am really a newbie in this rooting world. So, I am coming on this forum to have some advice. I read information on rooting your device, in which everything is explained very well, but could not find information on how to update once a device was rooted (probably I did not search in the right place). What I did so far is:
1) Taking backup of my pics (by manually drag and drop the folder on my pc), SMS and call logs (with sms backup + app), syncronized my contacts with gmail so that I can recover them later on and backup the music folder. I installed backup Titanium to back up my apps on my SD card.
But now, I am stuck with some questions (could you guide me where to find the information?):
1) Which most recent version of Android is supported on the device I have? Which version will work best?
2) Is there important information that I forgot to back up? + I have a problem with the backup Titanium app. It could reach my root in the beginning, but then the Superuser app updated the binary and from then on my titanium app got stuck when getting access to the root. Any idea how to solve this? Install an older version of the bin.file? How to do that exactly? thanks! => I could fix this problem by installing an older version of superuser in CW recovery. If others have problems with this issue, I can provide help from now on
3) Is there a guide with step by step procedure on which files I have to download on my pc and which procedure to follow? Or could you advice me some useful links?
thanks!

1) there is android 4.2.2 available for this amazing device
2) you propably forgot to backup efs folder
3)
- 1) follow this guide to get android 2.3.6 to your device: http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
- 2) follow this guide to get android 4.2.2 (cm 10.1) to your device after: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
- 3) now you can flash most of the roms you find in i9000 android development forum. i personally use slimrom

copy /efs! backup ur imei n md5 in efs first! copy da whole efs file! or do nandroid backup.
READ N FOLLOW CAREFULLY here
http://forum.xda-developers.com/showthread.php?t=2149455
considering u already done flashing Sammy n CF
prepare for ROM & kernel(optional) hunt! go to dev section and choose which JB u wanted.download it together with cm9.1.0 n copy to root of internal sd.
n make sure to flash cm9.1.0 stable from cyanogenmod website (galaxymtd) first from 2.3.6, first flash will bootloop, go back to recovery with 3 combo button. flash again n dont leave recovery.
after done flashing twice (if flash ended too quick, then flash again). direct flash 4.1/4.2 chosen rom, twice (first flash will come up with error, juz ignore it flash again (bootloop) recovery again n flash again
Sent from my GT-I9000 using xda premium

A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000

Vauvenal7 said:
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Click to expand...
Click to collapse
maybe nope, but try mod urself by searching on theme n app section
Sent from my GT-I9000 using xda premium

Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?

mogwai123 said:
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
Click to expand...
Click to collapse
yap, its da same, but do some reading first
Sent from my GT-I9000 using xda premium

when I copy my efs folder, I see that it is empty. any idea? I should not proceed further? What should I do?
UPDATE: phone still finds my IMEI number when dialing *#06#

if ur imei intact, then leave it, i dont know which ROM ur using but try to see /efs with option show hidden in rooted file explorer
Sent from my GT-I9000 using xda premium

I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?

mogwai123 said:
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
Click to expand...
Click to collapse
Should I shut down my phone and try to put it in download mode again to put the JVU rom on it again via odin? is that the best strategy? Or should I do something else? and if that would work, what is then the best procedure to avoid such situations again?

nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium

compacity said:
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, thanks!!!! this worked!!! I justed flashed cm9 and it works. So, if I understand well now, I can just return in recovery mode and install from zip from sd card to cm10 and then for instance to slimrom? Or between 'two' flashes, I need to follow the last part of the procedure in the link you gave me? So:
"Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want..."
OR: can I just go to recovery mode and do install from zip without doing that procedure with "wipe" etc?
Just to know, as I am just a newbie in these things!!! But I want to thank you once again for the clear explanations and the good help!!!!

juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium

compacity said:
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?

mogwai123 said:
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
Click to expand...
Click to collapse
as i already said, flash more than 2 times when upgrading, juz upgrading process. GB-ICS-JB (CM7-CM9-CM10/10.1) is upgrading process.
changing ROM not necessarily need double flashing, but u can do it if ur not satisfy whether da ROM already flashed or not
Sent from my GT-I9000 using xda premium

ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution

mogwai123 said:
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
Click to expand...
Click to collapse
Hmmm, is probably because I get this error when starting slimrom: invalid IMEI number...I flashed it a second time, but it gave me the same error...

Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app

wget21 said:
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I will have a look there for that google play problem.
More problematic is that problem of IMEI. When I flashed from CM 9 to CM10 I did not do that wipe of cache and data as suggested above (the reply came later on), and then I flashed slimrom. That I forgot to wipe between CM9 and CM10, can that be the cause of wrong IMEI now? Is the solution now, to wipe cache and data, to flash again CM 10 and to flash then slimrom again?
Or should I just leave everything like that and do a recovery of my efs folder? If yes, any link for this?

RemICS

Hello guys,
i have succesfully flashed the new RemICS rom. It's works fine. When i will install the new addonpack, it's still show the bootanimation. I wait for 30 min but nothing happened. I try it 3 times but nothings change. I come from ICS 4.3. Can anyone please help me out?
And yes... I follow the installation steps.
Rom link: http://forum.xda-developers.com/showthread.php?t=2427514
Thanks,
Marvin
PS: Sorry for my bad english.

Did you try to do a full wipe?
Sent from my GT-I9001 using xda app-developers app

KiLLAH89 said:
ICS 4.3
Click to expand...
Click to collapse
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?

käsebr0t:45552591 said:
Did you try to do a full wipe?
Click to expand...
Click to collapse
Yes everytime i flashed it.
tetakpatak said:
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?
Click to expand...
Click to collapse
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.

KiLLAH89 said:
Yes everytime i flashed it.
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.
Click to expand...
Click to collapse
It is just name of the ROM, and the developer writes you clearly in the first blue field, in the first text line:
Android Base CM10.1.3. RC1 JellyBean
JellyBean is not ICS (ICS is 4.0.x) so you need Gapps for CM10.1x / Android 4.2.x
CyanogenMod 9 is based on ICS

HELP needed for RemICS Odin installation
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:

[email protected] said:
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:
Click to expand...
Click to collapse
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD

thx for reply
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Soryuu said:
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

[email protected] said:
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Click to expand...
Click to collapse
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD

Here is where my noob-ness kicks in.
What internal storage is available by default on the Note1? Is it just the internal sdcard?
what puzzled me when I last flashed with odin (repeated it a number of times as I was trying to get the device to recognise ext sd card) to get the current Darky Extreme rom on (which is working fine no problem at all) is that there was still some relic directory structure left over. These were all empty folders visible when navigating within CWM. Didn't matter what type of formatting I did they wouldn't go. To summarise: much confusion and something got twisted.
So questions arising are:
-How to nuke the internal disk/card properly so there are no remnants prior to me doing another darky reinstall?
-Then, how to copy a zip file to internal card but still have it remain after the format and wipes that would precede a zip install?
-How to fix the device to mount the ext sdcard? FYI other sdcards can't be mounted either. I have tried 4 different ones. And here's the kicker-once booted I go to file manager and there I can see and access all the files/folders on the external card!!! So it's definitely a phone problem as opposed to a sdcard problem. Something got flagged along the line.
Rgrds
Lawrence
Soryuu said:
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse