Database Develop

what is custom kernel ?? when it is required??is it included in custom ROM ???

what is custom kernel ?? when it is required??is it included in custom ROM ???
so much confusion about custom kernel !!!
custom kernel is independent or dependent on bootloader ??? for to have custom rom we need custom kernel also ???

1. Custom kernel is a different base for your rom. Custom kernel requires unlocked bootloader. Custom kernel and unlocked bootloader provide some performance and capabilities benefit.
2. It depends on the type of the rom if you need or not to flash custom kernel. Many roms DO NOT REQUIRE flashing kernels, while some DO. You can find if rom requires custom kernel in the thread that the rom is posted...
Sent from my E15i using XDA App

Which rom do you want to install
Sent from my E15i using XDA App

i want to install cm7 on my x10 mini, but the device is stuck on the boot page and doesn't go ahead., plz help

tlabxit said:
i want to install cm7 on my x10 mini, but the device is stuck on the boot page and doesn't go ahead., plz help
Click to expand...
Click to collapse
Most off-topic question ever!

Use flashtool
Sent from my E15i using Tapatalk 2

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

About MiniCM9-3.0.4 on STOCK KERNEL

I want to clarify if it ever works in stock kernel? because mine is not possible to unlock bootloader, I want to change my CUSTOM ROM from CM7 to ICS ROM. Many also ask if it ever works on STOCK kernel.

jepoy25 said:
I want to clarify if it ever works in stock kernel? because mine is not possible to unlock bootloader, I want to change my CUSTOM ROM from CM7 to ICS ROM. Many also ask if it ever works on STOCK kernel.
Click to expand...
Click to collapse
i dont think nAa will develop stock version

minicm 9,10 on stock kernel is impossible.

Its impossible to run CM9+ with stock ROM. it requires swap(I guess) and some tweaks + libs that requires with custom kernel.
Correct me if I'm wrong.

-HuntDX- said:
Its impossible to run CM9+ with stock ROM. it requires swap(I guess) and some tweaks + libs that requires with custom kernel.
Correct me if I'm wrong.
Click to expand...
Click to collapse
Yes you guess !
Man on stock it's just 165mb of ram,so we can't made cm9 for stock rom! On custom is 184mb!

Sorry bro, if u want ICS for stock kernel,
there is a one, but it has so many bugs. You can try that if u really want.
Good Luck

Sorry dude it wont.....our kernel dont really support ics...so....
NO....it wont..
Sent from my GT-S5570 using xda premium

If you want rom for stock kernel, only Gb not isc. :<

[Q] Change kernel on a stock ROM

Hi,
Someone knows if is possible to change the kernel in a stock rom? I'm looking for one that allow "mounts", "install's/updates" via CWM and support for init.d
BR

if i'm not wrong, i've only seen cm based ones in this section..If you want you can build one on your own and mod it as you like..There are lots of tutorial available to do it..if you don't want or you don't have time to do that, i suggest you to flash a stock based custom rom..Have a nice day!

just install one...mr. droid...
Boooooooo!.....did I scared you?

raducu7890 said:
just install one...mr. droid...
Boooooooo!.....did I scared you?
Click to expand...
Click to collapse
is the kernel stable?

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!

R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)

Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070

Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.

So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance

Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?

YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.

shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language

YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!

Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?

YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!

Before installing a ROM is there an option to view which languages it supports?

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance

OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?

YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.

Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..

Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance