How to flash Onecosmic's ICS port Android 4.0.3
Flashing video Guide
Onecosmic's ICS Port Android 4.0.3 RC1
Flashing Video Guide
[Q] Onecosmic's ICS 4.0.3 Port Compatibility
Thanks for the great video guide! I was wondering if this only works on the samsung galaxy s i9000 unlocked version, or if it will work on its variants. Also, if i am running stock firmware, how do I get to ics, since you said not to flash from stock firmware. Must i install cyanogenmod 7 first? if so, where would i get instructions on doing this? Will flashing this build also unlock your phone if not already unlocked? Let me know. Thank you!
which variant do u use?
Ics port for Samsung galaxy s
I was thinking of using a USA T-Mobile t959 variant, but could also use the GTi9000.
Also, I could preform the install on the i997 AT&T Infuse 4G. I am looking to buy an older galaxy s, but still run ics on it, which is why I am asking. I would opt for the unlocked i9000 model, but they are rather expensive, which is why I was wondering if ics would run on cheaper, carrier locked variants, which I could later unlock. Thanks again for your help.
Related
I have flashed T-mobile tab SGH-T849 to EURO Rom
following instruction of this thread
"[How-To] Flash Euro ROM on T-Mobile or ATT Samsung Galaxy Tab (w/ video)"
even though my device was SGH-T849 and pit file was p1000
i found myself well succeed!!
Now in my tab model number says GT-P1000 not SGH-T849
I don't kno what that really affect my device
but now i have voice,SMS,Edge internet enabled
but problem came when i tried to update current firmware 2.2 to 4.0.3
which is latest firmware exist, but i am stuck can't sync to my device
ttp://img694.imageshack.us/img694/4831/1111wni.jpg
as you can see i have installed those and usb driver for extra on bottom
which is not visible on picture
now that i have 4.0.3 platform what can i do to install???
i am on 2.2 firmware EURO Rom, if i upgrade my firmware will it be okay ???
i want to use EURO Rom on 4.0.3
advices please thank
i kno how to use odin and really don't know how to use adb
i prefer using sd card installing
thanks
lsczzzz said:
I have flashed T-mobile tab SGH-T849 to EURO Rom
following instruction of this thread
"[How-To] Flash Euro ROM on T-Mobile or ATT Samsung Galaxy Tab (w/ video)"
even though my device was SGH-T849 and pit file was p1000
i found myself well succeed!!
Now in my tab model number says GT-P1000 not SGH-T849
I don't kno what that really affect my device
but now i have voice,SMS,Edge internet enabled
but problem came when i tried to update current firmware 2.2 to 4.0.3
which is latest firmware exist, but i am stuck can't sync to my device
ttp://img694.imageshack.us/img694/4831/1111wni.jpg
as you can see i have installed those and usb driver for extra on bottom
which is not visible on picture
now that i have 4.0.3 platform what can i do to install???
i am on 2.2 firmware EURO Rom, if i upgrade my firmware will it be okay ???
i want to use EURO Rom on 4.0.3
advices please thank
i kno how to use odin and really don't know how to use adb
i prefer using sd card installing
thanks
Click to expand...
Click to collapse
I dont know what are you trying to do.
Yo want to upgrade the Tab to 4.0.3?
In the screenshot, the android SDK api for 4.0.3 this NOT install android 4.0.3 in your device, is a developers kit to make applications and other projects for android 4.0.3
what do you mean? there is no upgrade firmware version for this/???
no firmware upgrade for this ??? do you kno whats latest firmware version for samsung galaxy tab 7???? if not do i have to wait for new euro rom ??
or isn't upgrade version at all??? im confused -0-
lsczzzz said:
what do you mean? there is no upgrade firmware version for this/???
no firmware upgrade for this ??? do you kno whats latest firmware version for samsung galaxy tab 7???? if not do i have to wait for new euro rom ??
or isn't upgrade version at all??? im confused -0-
Click to expand...
Click to collapse
Samsung is going to release Android 4.0 for Galaxy tab series exect The original (7") Severals Devs are working for port Android 4.0 for our tabs, you can see the project in developers section, The lastest official upgrade for our tabs is android 2.3.6 also in developers section, There are ROMS for the tab:
Overcome rom (2.3.3)
Boca (2.3.4)
CM7 (2.3.7)
MIUI (2.3.7)
BOCA RC1(2.3.7)-In Progress
Honeycomb RC1 (3.0) - Project Abandoned.
Android Ice Cream Sandwich Alpha 3 (4.0.1)-In Progress
Of course you can find there roms in developer section.
I was wondering if Onecosmic's ics port for galaxy s i9000 only works on the samsung galaxy s i9000 unlocked version, or if it will work on its variants. If so, which ones? Also, if i am running stock firmware, how do I get to ics, since many people have advised not to flash from stock firmware? Must i install cyanogenmod 7 first? if so, where would i get instructions on doing this? Will flashing this build also unlock your phone if not already unlocked? Let me know. Thank you!
at first which variant of galaxy s do u use?its best u search the net for ics for ur variant..
Good afternoon, everyone!
I have a small doubt, recently bought a Galaxy S (1) Brazilian GT-i9000B and turn it in as Kies updated to version 2.3.3 of Android, but I'm really into the ICS test, correct me if I'm wrong , I must first install an alternative kernel, then a custom ROM, right? So I wonder if this Kernel http://forum.xda-developers.com/showthread.php?t=1044519 is compatible with the Brazilian version of the Galaxy S and advises me to install it in order to exchange and ROM ICS also the ROM I have in mind would be the OneCosmic say that the ROM is closer to the ICS "Pure" or is there another, best?
Sincerely,
Lucas
I have a Galaxy Tab 10.1 (GT-P7510) with Android 3.2 and kernel 2.6.36.3 installed. I'm building a customized kernel using Samsung's official kernel source code for research purposes. I do not need to install any third party hacks or do fancy things. I just need to flash my own kernel to test it on the device.
I have been searching around the web for a clean way of flashing a modified Samsung kernel build on this device, but I'm not able to make sense of the results I'm getting. I'm not sure if my device has an unlocked bootloader or not.
I'm totally lost in this. I just need some hint to start this.
1. Do I need to unlock the bootloader to be able to install a new kernel?
-- How a bootloader is unlocked on Galaxy Tab 10.1?
2. Can I do this using adb or fastboot?
I appreciate your help!
you are in the wrong forum, there is a good page for galaxy tab 10.1 look for it.
Sent from my GT-P1000 using Tapatalk 2
Hi Everyone,
I have Galaxy Tab [SHW-M180S]. Its a korean version. I want to install official ICS or Jelly Bean in it.
Please tell me the link for downloading that files.
Also,
Please tell me the process of rooting it and installing it.
THANKS
theres no official ics or jb roms for shw-,m180s,the custom roms have some limited sms features,the charging animation is not working right,the whole screen lights up and no animation,tried and tested both not happy with it