flashing from I9000XWJFD (2.1) to I9000NEJVK (2.3.5) - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi all,
I had the bad idea to update the firmware of mz sgs from its original firmware to the latest one with kies.
An since that moment, quite few hours are alreadz passed..
The situation right now is:
Kies had a problem and in the middle it stopped to work.
Consequently, the mobile did not work anymore.
After switching to odin, I managed to install the JFD from samfirmware.
Now I would like to switch to the latest one.
But when I am installing it, it does not work.
I noticed that to install the JFD 3 files where required while for the latest (I choose italian for some stupid patriotism feeling) there is onlz one file (boot type)
Anyway, when I try to flah the mobile does not work anymore.
I get all kind of red reports for errors and it remain stuk in the samsong util screen.
Wiping does not work. In general, I think I tried every type of combination and guide...
So now I suspect there is an order in which one should install the firmware...
But I cannot find it..
Could anyone tell me which is the right sequence?
ps: in case my idea is wrogn, please link me a guide or a brief explanation.. I am a little at loss..
thanks

Related

[Q] Trouble going back to Stock

From what I have gathered... this seems to be a problem that only I have encountered, or at the very least something that I have deemed annoying enough that now I have to solve it... but I recently threw Gingerbread onto my i9000, quite successfully I might add, but I decided I wanted to go back to Froyo until the official release of 2.3 comes out of Samsung, since I am a big fan of "stock".
Problem is, every single ROM (I am at ten and counting) always results in Kies telling me that there is no update available. I have been loading only stock ROMs onto my device, so I am a little confused by this, since even the 2.1 firmwares have given me the same message. I know that, when I had Froyo loaded on stock, the message read that everything was up to date or something along those lines. Having that knowledge just means I won't be able to stop trying to put things back to stock until I see that same message again.
Anyone able to shed some light on what is happening here and how to fix it? Ideally I would love to load up 2.1 Eclair, update to Froyo using Kies and then just call it a day.
(PS. on Gingerbread I am getting some weird "static" screen popping up every time I restart... is that normal? I will take a picture and post it into the Gingerbread review forum if I can capture it.)
i was in a similar boat as you, loading 2.3 was no problem but going back is a pain in the ass.
BE WARNED! I spent nearly a day and i know a fair amount about what im doing, i even had to make the USB jig to force download mode at one point (testing different ideas) so be prepared for some issues.
what i did was use odin to flash stock JL2 (9000M bell version here), with 512 pit and a CSC file from another build (sorry i forget), bootloader update repartition clear efs checked. Thats the ONLY thing i could find to get me back to stock without any internal SD error messages.
IF YOU FLASH THE WRONG THING OR THE FLASHING PROCESS SCREWS UP YOU CAN BRICK YOUR PHONE. Read twice, do once.
See if you can find a stock rom for your area, what your phone came with, with the proper pit file and csc file.
Best of luck, you are not alone. I will definately be waiting for a less buggy leak before i switch back to gingerbread.
Kies reads and looks for the correct software for your product code and firmware tied to the supplying network .Once you install different roms you may change those details and Kies cannot find the correct details on your phone to recognise and match it to a firmware .
Spoof product keys and Kies registry patcher posts may help .
jje
Thanks for the quick answers guys... I shall plug-and-chug a bit more tonight and see if I cannot get something to work... then I will be back to post of my success (or failure).
You can use SpoofFw to trick Kies think you are on an official fw, the let Kies do the stock upgrade for you.
Having quite a bit of trouble getting Busybox installed properly, apparently... SpoofFW always starts up with "BusyBox not found. Spoof not possible." I have installed BusyBox a couple of different times from different sources and different versions... nothing seems to work. Am I missing something?
Also, when loading certain ROMs... the phone doesn't seem to register the modem anymore. There is a 2.2 ROM (forgot which) and the 2.3.3 ROM (without Bootloader) which, unusually enough, are the only ones WITH a working modem. Just tried loading up the 2.3.3 ROM w/Bootloader but the modem file from the non-bootloader version, and that seems to work... weirdly enough.
Since I am betting that there will be a "official" update through Kies to 2.3.x at some point, perhaps I will stick with this... since I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has my product code become screwed up?
Wirebrook. I already replied to one of these today. Same happened to me. flashed back to jpu with a view to using kies to upgrade me to jpy but it wouldn't. So flashed eclair jm1 and kies upgraded me to jpy so I suggest that. You'll have to flash bootloader afterwards though as you'll lose 3 button reboot. But don't panic
Sent from my GTI9000 using XDA App, gingerbread 2.2.3 rooted, ADW launcher + gingerbread theme
I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has my product code become screwed up?
Its not an official rom its a Samsung stock rom not the rom that was supplied with your phone . Kies might update it or might not .
You have firmware provided by the original phone seller and product codes hardware id firmware id for that . Kies will see that and update .
But its going to show not the firmware supplied by the original phone seller and tied to product code etc . Then requires you to Spoof Kies for an update .
jje
@Mossy1963
I'll give it a shot this evening... I have the JM1 firmware glaring at me in the face on my desktop right now, though... not sure that worked right the first time.
@JJEgan
As long as it is all "stock" I am pretty much fine with it at the moment. Not too bothered with having it tied to it's specific product code so much, although that would be nice.
wirebook said:
Having quite a bit of trouble getting Busybox installed properly, apparently... SpoofFW always starts up with "BusyBox not found. Spoof not possible." I have installed BusyBox a couple of different times from different sources and different versions... nothing seems to work. Am I missing something?
Also, when loading certain ROMs... the phone doesn't seem to register the modem anymore. There is a 2.2 ROM (forgot which) and the 2.3.3 ROM (without Bootloader) which, unusually enough, are the only ones WITH a working modem. Just tried loading up the 2.3.3 ROM w/Bootloader but the modem file from the non-bootloader version, and that seems to work... weirdly enough.
Since I am betting that there will be a "official" update through Kies to 2.3.x at some point, perhaps I will stick with this... since I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has mys product code become screwed up?
Click to expand...
Click to collapse
That error message its actually wrong, you get it because nv_data.bin could not be found in /efs folder.
This could be due to a faulty flash where Csc was not applied correctly in recovery on the first boot.
Reflash with Odin is the solution.
Sent from my GT-I9000 using XDA Premium App
@Mossy1963
No cigar whatsoever... Kies simply stated there was no update to be done. Oh well.
@LuffarJoh
Tried reflashing... didn't work either.
Aaaaand to make things weird, that sometimes-working Antenna suddenly started working with an Eclair ROM that it hadn't worked before. Then after a reboot... nothing anymore. And now I have flashed the thing back to Gingerbread and what do you know... no more antenna. I would much rather have a working phone as opposed to a "perfect-stock" phone, so it looks like I might have to get an exchange... and perhaps acquire what I was after in the first place at the beginning of this thread anyways.
Hi, I was wondering exactly the same thing after flashing 2.3.3 today. I just like the idea of being able to plug the phone into kies to get a proper release although, I've no doubt the exact same version will be available for download. Has anyone got any useful info ?

[Q] Softkeys not working after update

I updated my SGS using Kies to 2.2.1. I have not rooted the phone or made any other changes to the firmware before this. After the update, my back key randomly seems to have gotten "stuck" and pressing the home key snapped a screenshot. This was bad enough. Now, both softkeys have stopped working, although the home button seems to work fine. I have done every reset on the phone that I can find, but still no help. Of course, I am still running 2.2.1. I can't think of any other cause for the problem except the update. Has anyone else had or heard of this and does anyone know of a fix?
SGS GT-I9000T
Firmware 2.2.1
Kernel version 2.6.32.9
Build number FROYO.UBJP9
PDA I9000TUBJP9
Phone I9000TUBJP9
CSC I9000TUUBJP9
Build Info 2011.01
Sent from my Laptop 'cause the **** phone won't work right.
I have had this problem before. What I had to do to fix it, was flash a 2.1 rom with Odin.
If you don't want to go that route, check in Kies somewhere in the tools tab for an emergency firmware recovery. Hook the phone up and see if that will fix your issue.
Have you factory reset your phone?
I have already tried the factory data reset and the factory format. Nothing from either of those options. I tried the Kies emergency recovery and it is asking me for a code that I have no idea where to get...
I am downloading the files now to try the Odin flash...I guess we'll see how that works.
The next logical question would be why did this happen? Will I be able to update to Froyo? Or is this gonna happen again the next time I try to do an official update?
It could just be a buggy flash. I really don't know the answer to that.
If your 2.1 rom has 3 files, flash with a 512 pit and re-partition.
If 1 file, no pit no re-partition.
Yes, you will be able to upgrade to Froyo afterwards.
Not sure what happened, but something didn't work right.
After the first flash, all appeared to be well, but when I tried to swipe the screen to unlock it, nothing happened.
So I tried it again. Now, there is an eight sided star type thing that keeps flashing on the screen. If I disconnect the USB cable, the Samsung screen keeps flashing. I can't get ADB or Odin to recognize anything.
Any ideas?
PHEW! Using the button combinations I was able to get back into download mode and I am currently flashing again. The most surprising thing is that the button combination trick didn't work before. Hopefully it will work this time.
Damn! So much for that. Even after flashing again, everything just keeps flashing. I would greatly appreciate any help or ideas that anyone might have.
Alright, final update for the night. I finally got it flashed, and its now flashed to
2.1-update1
I9000XXJG1
Kernel 2.6.29
ECLAIR.XWJG5
PDA I9000XWJG5
Phone I9000XXJG1
CSC I9000OXXJG4
At some point I might try to do the Froyo update again.
Now the bad news...soft keys still not working. Any other thoughts on what could cause them not to work?
The firmware that you have just successfuly flashed, was it 3 files or just 1?
Have you tried to update and touch key drivers previously?
I updated with a 3 file which I found at samfirmware.com. It's currently the only thing I could get to work. I believe that it is what I had before the Froyo update. And I seem to have all functionality except the softkeys.
I haven't done any other updates since or any driver updates. I didn't even know there were any.
Did you use a 512 pit and re-partition?
I had this problem before once, and I flashed this firmware and it resolved the issue. It's up to you if you want to try it. It is an Australian 2.1 firmware.
http://www.megaupload.com/?d=45UEDN35
If you want to give it a try, use a 512 pit and re-partition.
Alright, I downloaded your files, but when I tried to unzip the files, I keep getting an error the the files are corrupt. Not sure what is going on there.
I am a dumba$$. I just realized that my wife has the EXACT same phone as me. We got them at the same time, so all the original information is the same. What I need is:
GT-I9000T
2.1-update1
Baseband Version I9000TUBJG7
Kernel version 2.6.29 [email protected] #2
Build number ECLAIR.UBJG5
PDA I9000TUBJG5
PHONE I9000TUBJG7
CSC I9000TUUBJG4
Is there anywhere that I can get this firmware? Is there anyway to make a backup copy from my wife's phone that I can just install on mine? I do not have root access on here phone, and after all the trouble I'm having with mine, I don't think that she'll let me, so hopefully there would be a way to do it without it.
Hey man,
I did a little searching for you, but could not find that exact firmware. I did find this, and it should work.
Here's the thread.
http://forum.xda-developers.com/showthread.php?t=907701
Here's the download
http://www.mediafire.com/?7wgu37wek6vybia
Rom info
GT-I9000T
Baseband Version2.1 update1
Kernel Version 2.6.29 [email protected] #2
Build ECLAIR.UBJI1
PDA: I9000TUBJI1
PHONE: I9000TUBJH1
CSC:I9000TUUBJI1
Edit: I did read through this thread a bit, and it seems that this rom may disable 3 button recovery. If that's the case, I would still flash this to get your softkeys working again. Make sure to flash the 3 button fix after this firmware flash if it no longer works.
I actually found and flashed that firmware a little while ago with no improvement. Still no softkeys. I am completely confused. I thought this was software, and now I am beginning to wonder. Is there anything else that I can install that might fix this?
Since I no longer have stock firmware and don't seem to be able to be able to find the original again, I'm not sure that I am even going to be able to take it back to my carrier, since I believe that the warranty is voided unless I can return it to the original firmware.
Hello,
I'll keep an eye out for that firmware, it has to be somewhere you would think.
In the meantime, to pull the backup from your wifes phone, I do believe you need root access. Maybe you can pursuade her by cooking her a nice dinner with a good bottle of pinot noir
In the meantime, I'll keep looking for you.
I'm not even sure how long it's been anymore, but I am still working on this...
Okay, so I think I'm just going to swipe my wife's phone and root it while she is not looking...
My question is this: Is there a guide that will tell me how to 1. root (then unroot) her phone and 2. create a backup of her firmware that I can install on my phone. Also, if said backup can be used with Odin, I will be happy to share it here since it seems to be lacking and much needed.

Is it possible...

I installed the Gingerbread update off samfirmware on my samsung galaxy s but i would like to go back to the official firmware for vodafone UK so i can just continue updating through Kies, is it possible and if so how??
Sorry if this is in the wrong place but i have been searching the net for ages and i can't find anything and all i keep seeing is this site so i thought you guys might be able to help me.
Reinstall the original firmware you saved .
Another one that did not save then you might find somebody with firmware saved .
Or you flash stock rom via Odin use registry spoof method to try to update to Vodaphone current firmware .
Kies only updates original firmware .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
EDMJosh said:
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
Click to expand...
Click to collapse
It is quite simple. Disable any lagfix or ext4 conversion (if any) back to RFS. Flash via ODIN with preferably 512 pit & repartition (it will save you a lot of time & less opportunity of errors appearing afterwards). I would also suggest you to make a backup of your data & do a factory reset before flashing back.....
On youtube are many tutorials how to flash back to your stock rom.
example:
search: samsung galaxy s flash stock rom
-> the first video
stock roms you can download in this forum
I do not have the original VodaFone Firmware, That's why i need to change this current firmware so i can update it via Kies to the original Vodafone uk firmware, i do not know nothing about lag fixes or anything, i just used odin to update my phone to V2.3.3, i followed simple instructions to do it, it was my first time doing anything to my phone, i know i should of read into it etc....
http://forum.xda-developers.com/showthread.php?t=723596
Basic faqs .
Roll back to 2.2.1 from Beta 2.3 Gingerbread .
Post 2 but you are as always at risk of bricking your phone .
http://forum.xda-developers.com/showthread.php?t=1033781
Kies will only update stock 2.2 .1 to Vodafone firmware if you spoof the registry as posted .It will not update to Gingerbread until Gingerbread is released .
jje
I'm not very good at these things and i know i shouldn't of done it in the first place but i don't understand those instructions, is there no way anyone has it or can get it for me? or extract it from there phone or something like that?
No nobody seems to bother keeping original firmware >Try a Google search for Voda firmware .
Flash back to stock Eclair 2.1 and try below to spoof Kies.
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
That fails then your update path is via Odin .
jje
Hi, thanks alot for your time to reply to me, i have currently rooted and i have SpoofFW but when it says choose preset i dont have any in the drop down box and i need a Vodafone uk one, any help here mate?
I have posted the codes you should use in SpoofFw thread, but here you go again.
The codes can be found in the presets as UK (Vodafone) and is
Product Code: GT-I9000HKDVOD
PDA: I9000BUJG2
CSC: I9000VODVOD
Phone: I9000BUJG1
An alternative is to use Check Fus Downloader with which you can download the latest official firmware for UK Vod (I9000BUJS3) and flash that file with Odin. The app can be found in my signature.
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
EDMJosh said:
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
Click to expand...
Click to collapse
make sure you are connected to internet when you start the app, and try use Refresh preset in the menu. also make sure you have busybox installed.
first hit Backup. put the info above in the fields. and hit step 2 ok. Then press reboot, and start the app again. put the same info as before in the fields and hit ok on step 3. Conenct to Kies.
you can send me your complete log right after hitting step1 button if anything goes wrong.

[Q] Can not register on network problem

Since a few days it is impossible to use my Samsung Galaxy GT-I9000 as a phone. Whenever i try using it, it doesnt register on the network.
I am running DarkyROM JVH v10.1 baseband version I9000XXJVO Firmware 2.3.3
If i try to register on the network is searches and searches and searches... but doesnt find anything.
What "worries" me is the fact that when i start up the phoe is tells me its a Samsung Galaxy S II, which it surely isnt!
Please advice.
CheopsChefren said:
Since a few days it is impossible to use my Samsung Galaxy GT-I9000 as a phone. Whenever i try using it, it doesnt register on the network.
I am running DarkyROM JVH v10.1 baseband version I9000XXJVO Firmware 2.3.3
If i try to register on the network is searches and searches and searches... but doesnt find anything.
What "worries" me is the fact that when i start up the phoe is tells me its a Samsung Galaxy S II, which it surely isnt!
Please advice.
Click to expand...
Click to collapse
There is your problem..
Re-flash stock firmware with pit and re-partition, When complete, check you can register on the network.
If so then avoid the ROM which you are currently running.
EDIT: When you say the phone says Galaxy S II, Is this not a boot animation taken from the SGS II ? Or is it the actual boot screen which says its a SGS II ?
Call me stupid ;-) but i didnt save my stock-rom....
CheopsChefren said:
Call me stupid ;-) but i didnt save my stock-rom....
Click to expand...
Click to collapse
No problem.
Head over to www.samfirmware.com and grab one from there, flash it through odin, Instructions are on that site too.
Thanks AzzleDazzle, but now comes up another problem.... Probably very basic, but for me, its all abracadabra.
I have an European Samsung Galaxy S GTi9000, but if i look at the site there are many roms u can download. From Android 2.1 to Android 2.3.4 for "my" device. Which is the one i should use? My ID is I9000XWJVH, which is according to the site an unknown H version.
Please advice once more, thanks in advance!
No worries, Make sure you download a firmware specifically for the I9000
the last 3 letters eg JVH is the firmware version, JV.X. represents gingerbread 2.3.3 and above.
Gingerbread is the latest release, so i would go for one of them, The one at the bottom of the page on samfirmware will be the very latest, Which i think is JVR
So look for I9000XXJVR.
flash that in ODIN and job done you should be back up and running and with the latest release.
The rest is upto you . i.e going to a custom ROM / rooting ect...
i feel more and more like a noob....
I started Odin, and there u can choose for the pit file, or for the pda file (which is the one i should use i guess), but also u have the choices of re-partition auto reboot and f. reset time. Which of those 3 (or non at all) i should use?
I dont know what has happened. I choose for only reboot after flashing. Flashing went okay, but now it seems to be stuck in a loop. The Galaxy S screen gets followed up by a Swisscom screen in a seemingly endless loop.
Worse, with volume down - power on i can not come in the download menu anymore...
Any advice would be much appreciated now.....
Also when trying a re-partitioning via Odin it doesnt work?
Found the solution. Using Odin 1.8 did the trick. I used Odin 1.3 which probably couldnt flash the 2.3.4, while when i tried with Odin 1.8 it worked flawlesly.
Thanks for your help!

Need some advice with i9000M

Hi guys, I know I need to make this short but I want it to be clear anyway. This is crazy I wanted nothing to do with smartphones 3-4 days ago because all the carriers rip us off with huge bills to get them. But low and behold when my cheap flip phone died after 3 years of loyal daily work a friend of mine offered me his Galaxy S i9000m for a good price. Started playing with the device and having a strong software/computer background started having a lot of fun with all the applications and was amazed with the possibilities (Networking, ipcam whatever) that just kept multiplying until I fell upon applications that needed something called gingerbread... Anyways I can tell you I learned a ****load in 48hours...
So I installed Samsung Kies, it found me the update and put it on for me.. (2.3.3 Gingerbread) then the nightmare started. The phone would boot, and would randomly reboot a random number of times until it could finally stay on and this could last from 2-30 minutes. So I thought, I'll just do a factory reset, to realise that its "STUCK" in 2.3.3 once its updated no going back to 2.1 or 2.2 easily.
Started looking around for ways to downgrade, and EVERY SINGLE LINK redirects to these 'mass download' sites that end up saying the firmwares were taken down for copyright issues. So desperate to find something, I fell upon a multiple CSC FROYO 2.2 firmware for the i9000 and was able to flash that in download mode the phone worked fine, except for me being very curious about the fact that I lost the "M" in my model description...
So started reading this thread(Mostly because I had already realised that with this non i9000m rom I had lost the 3 button DOWNLOAD MODE which i Had before) **** : http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html
Got it rooted, got clockwork on, never managed to get the voodoo kernel working had errors in CWM.. so I was ready to give up until my eyes caught the
"*#*#2663#*#*
Then click Touch key FW update"
Which I thought would be neat to try.
NIGHTMARE, now BACK and MENU are dead, I understand that this is because I am running a non i9000m ROM and that updating the firmware rendered them unusable.
I came accross a post : http://forum.xda-developers.com/showthread.php?t=869492
Where this problem is adressed, I pretty much understand everything that should be done to get this back on its feet (right now the phone is still working I can use it at least 75% of its functions work except no back and menu)
Where I need your help : I'm not too sure how to attack this the right way, since I can't get into download mode I understand flashing is now more complicated to accomplish and now that I know that I need a i9000m firmware how can I find that...
Sorry for the long post I know I'm a noob here but I wanted to prove I had done all my homework to get where I'm at now seeking help from you guys!
Thanks a lot
Mat
By the way : Galaxy S GT i9000m currently on a 2.2 i9000 rom, my carrier is BELL. (Canada)
So there's no way of updating to 2.3.3 using Kies?
The only thing I can think of is getting a USB jig from ebay, which makes the i9000 go to download mode instantly. Good luck!
Alright, so I used CHECK FUS, and was able to get the i9000m stock BELL firmware YAY
now the help I need is to flash it correctly and find a way to get past the no download mode problem, would be very appreciated,
thanks guys
No, similar minds Sepharite, I also thought of redoing the Kies method, and then going back again if I needed to but now Samsung Kies says "Your device does not support firmware updates through Kies" Wow.. useful app, a samsung native app can't even detect it's own fricking hardware.
Thanks
UPdate : Was able to restore the 3 button "DOWNLOAD MODE" with a little tutorial online. Now I tried flashing my i9000m with ODIN, it flashed all the way and I get a i9000M logo now but it gets to the splash S logo and keeps rebooting never gets into the actual android setup is there something I did wrong?
In Odin all I put was the "BELL i19000m stock ROM" under PDA and wrote it. The device rebooted after flash but there still seems to be something I haven't done right.
Thanks guys
Please help guys, I know some of you out there have got this stuff nailed down!
Did you flash with a 1 file ROM or a 3 file ROM?
Using the UGKG3 ROM that you can fine here:
http://forum.xda-developers.com/showthread.php?t=1102881
Place the 3 files in their respective places (PDA, PHONE, CSC), for the PIT file, select the 512 pit file that should have come with ODIN, connect the phone, wait for ID:COM to turn yellow, and press Start.
That should get you going again. You may get apps that force close, so you'll need to delete the apps data and then reinstall them.
Hey thanks a lot man ya my flash was a SINGLE FILE, I bricked it yesterday trying to flash a different ROM since I had nothing to lose, I just got it working again on the old 9000 ****ty version that my back and menu keys don't work...
Now for some reason the USB JIG doesn'T work anymore after a couple of uses... could something have been damaged by doing it many times?
And your original roms section they are all unavailable due to copyright did you check the links before sending them?
When you say get the stock roms, I was able to get the UGKG3 file, but what about the versions? When I look at the north american section of the 2.2 version
UGKC1/UGKC1/BMCKC1/Sbl
UGJL2/UGJL2/BMCJL2/Sbl
UGJK3/UGJK3/BMCJK3
which one of the three suits me?
Thanks for your help, and if I get this running and go back and update my touch key firmwares with the right "Vibrant / 9000M" roms I should get them working again?
PS : I'm also very preoccupied by the fact that the USB JIG fix doesn'T seem to pop download mode anymore because this version of the ROM that I have has Download mode not working with the 3 button method. :S I wonder whats going on, but basically if I get your ROMS working the first time It'll fix everything but if it crashes then I lose the galaxy haha
Not sure why the USB jig doesn't work anymore. I have a couple and have only tested them on my phone to make sure they work, but they did not work on a Galaxy S II that I tried it on.
I just checked and the download link for the UGKG3 ROM at multiupload (downloading from multiupload), still works (you need to enter the captcha phrase).
The site megaupload was shut down by the US gov't, so that one won't work.
EDIT: UGKC1/UGKC1/BMCKC1/Sbl is the latest Froyo release from Bell. That's what mine and my wife's gt-i9000m phones came with.
She's still running it on hers.
Ok sorry for all these posts, basically when you said UGKG3 you want me to get the 2.3.3 ROM on ? Is that right? What if I Want to put on 2.2 to be sure I have no trouble with it since I'm in all this mess because the Kies update to Gingerbread had my phone in a bad state.
Thanks a lot by the way!
Sorry your post refreshed right after I did mine. Alright cool so I'll try the one you say your wife is running, I had made myself a JIG with a stock Samsung wire, it was working fine with a 300K resistor and I decided to solder it on and then it stopped working after that.... maybe the actual "usb plug" is damaged from the soldering heat I guess I'd have to try another wire, but anyway I'll try to download the 2.2 I just got the UGKG3 3 FILE rom downloaded one of the links did work!
But I'm a little worried about 2.3.3
I'll try to see if i can download the 2.2 first.
I mean basically... these roms shouldn't jam during transfer i Guess
One other thing I see different confusing information, is it important for me to click 'update bootloader" with these stock roms since these files contain an 'SBL' ? Because both times I bricked it was with an "update bootloader checked" firmware update trying to put the ARIES 3 button method fix as a boot.bin and sbl.bin
Fanks..
Files with SBL in the name already have the bootloader included in the PDA file, so "update bootloader" should NOT be checked.
That reassures me, because the only times it did jammed was when the bootloader was checked! THanks a lot blackrose i'll go out and buy another usb cable because I destroyed mine making my JIG. And I'll try yours out. I was reading a lot on another thread and found this one guy who flashed the JL2 one to save his keys instead of the C1 you said your wife was running, whats the main difference between those two and which one should I start with?
Update : I got a new wire, flashed the KC1 version of the firmware, everything goes fine, I did a repartition with the 512 PIT, it reboots the phone, loads all files in a prompt in yellow and there are no errors that appear, the phone reboots after writing 'successful update' and then goes to the galaxy logo and jams there and does the ONE vibrate, PAUSE, 2 vibrate on a black screen forever. The advantage of having successfully flashed a 9000M ROM allows me to have access to my DOWNLOAD MODE 3 button method, but ever since I flashed that 2.2 i9000 XXJP2 (seems its a euro version) off a torrent I found on the web (When I was desperate to find a functioning 2.2 working version) it seems as though it doesn'T want to boot with any other rom than that one, because all the 9000M roms that I've tried so far flash correctly, and the logo actually changed from i9000 to i9000M on the startup, but they just don't boot.. what could be missing it doesn't seem to be much???
Thanks Mat
If any of this can help, the device was rooted, I was following the darky's mod i9000M guide so I had previously installed the CLOCKWORK MOD and that's as far as I got because my eyes caught the FIRMWARE TOUCH KEY UPDATE which ruined my keys.
Could any of this have screwed something that stops my other roms from booting?
Thanks guys I really want to get this phone up and working again as I don't have much money and am afraid I'll have to cancel with my phone company if I just can'T get this running. I am also willing to make a significant donation to whoever can help me.
You in Canada right? Where abouts?
Sent from my GT-I9000 using xda premium
Quebec province
Alright, if this can help anybody my whole problme is solved.
I flashed the ****JL2**** the KC1 did not boot, the JL2 did.
Once inside JL2, I was able to update my TOUCH KEY FIRMWARE *#*#2663#*#* and everything went back to normal
I have no idea why the KC1 does not work, bugs me out.

Categories

Resources