hello;-)
how can i set the sensity of light sensor for keyboard and soft key backlight? if totally dark the backlight switch on, but to late. put i the finger on the sensor, light switch on. on dawn room light the backlight not switch and i can't see what i write
...Tapatalk
Belongs in general. :S
Try CM7.
910
eww245 said:
Try CM7.
910
Click to expand...
Click to collapse
I use liberty rom, in cm7 i can't save apn points with vodavone de sim card.
...Tapatalk
the button backlight i can permanently switch on with app "keyboard backlight controller". but works only for button backlight. by very dark light the hardware keyboard light switch on, but on dawn light goes off and i can`t read the characters.
i`ve found in sys/class/leds/kpd_backlight_en/ brighness the value is 0. i set to 1 (all value over 0 works) and save. after save the hardware backlight works permanently, but screen off and on set the value to standard and it works not correctly. i think the light sensor early switch the backlight off.
edit: i've solved the issue with app "tasker". now switch on the hardware keyboard backlight on sliding the keyboard. and soft buttons switch on when display on. the light sensor at this moment disable;-)
Related
Hi,
Received my brilliant brilliant kaiser today. Every penny worth an upgrade from trinity apart from a slight brick feeling.
I was wondering if someone knows how to keep QWERTY keyboard lights on all the time while you are using the keyboard. At the moment they stay on for few seconds when keyboard is opened, but turns off later and don't turn on even on pressing keys unless you close and open the keyboard. It would be helpful to type in dark if backlight on keyboard keys stay on as long as keyboard is open.
thanks
heh i use the low tech way, i put my finger over the light sensor
I am wondering the same thing. There is an option for "Automatic keyboard auto sensor" for the backlight under "Settings....Buttons....Backlight" but haven't been able to get it to work. Where is the light sensor? I could possibly go high tech and put tape over it!
Update:
In the Registry, navigate to:
HKEY_CURRENT_USER...Control Panel....Backlight....QKeyLedTimeout
and change the default value from 10(seconds) to something high eg. 180 (3 minutes).
This will keep the backlight on for the specified amount of time.
tworhythms said:
Update:
In the Registry, navigate to:
HKEY_CURRENT_USER...Control Panel....Backlight....QKeyLedTimeout
and change the default value from 10(seconds) to something high eg. 180 (3 minutes).
This will keep the backlight on for the specified amount of time.
Click to expand...
Click to collapse
so say you only need the keyboard for 1 min, when you slide it shut does it stay lit for the other 2 min or go off when closed?
One last update....the above registry mod actually will keep the phone button backlights on for the specified time as well as the keyboard backlight. So, this could be a bonus for some. Still haven't found the light sensor on this device I am guessing it is on the keyboard on the left side (tiny hole), but I still haven't been able to activate it. Anybody else had any luck?
XSIVSPD said:
so say you only need the keyboard for 1 min, when you slide it shut does it stay lit for the other 2 min or go off when closed?
Click to expand...
Click to collapse
It will go off as soon as you close the keyboard
tworhythms said:
.....there is an option for "Automatic keyboard auto sensor" for the backlight under "Settings....Buttons....Backlight" ......
Click to expand...
Click to collapse
Unticking this option actually fixes the issue... If you DON'T enable the auto-sensor, the light will come back on instantly on every new key press (any key..).
Stretching up the time-out with earlier suggested reg-mod is a nice added bonus...
The sensor is slightly left from the Q-key. A little black dot.
Strange,
I put my finger on top of it, and it did not light the keyboard
Rukyr99 said:
The sensor is slightly left from the Q-key. A little black dot.
Click to expand...
Click to collapse
Yeah.. my light sensor is iffy... Maybe it is just a bug.. I can be in a totally dark room and they key backlight will not turn on. If i disable the auto sensor the backlight, of course, works as normal.
i think i will have to leave it disabled..
Auto Sensor on p4550
Hello,
I have a kaiser and my auto sensor is not work.
Anyone have auto sensor (for light keyboard) work on his kaiser ?
Thanks.
Private69.
@++++
That is exactly the same problem as I am having. I can't seem to get the keyboard to light up in complete darkness. My other devices never had this problem. The backlight would come on in darkness. Any suggestions?
tworhythms said:
That is exactly the same problem as I am having. I can't seem to get the keyboard to light up in complete darkness. My other devices never had this problem. The backlight would come on in darkness. Any suggestions?
Click to expand...
Click to collapse
Most of the time it works for me.. The easiest fix it to simply disable the light sensor. It works just like any other PPC then. If it is misbehaving a reboot will fix it for a while. I haven't actually had any problems for a bit now. I wonder if it has anything to do with the lock password bug? I did disable my lock password and haven't had any problems since.. might just be a coincidence. Wouldn't hurt to try that too just to see.
I have the ATT tilt and I noticed that using the keyboard when opened the light goes off real fast and I understand the light supossed to go back on when I pressed any Key. But this is not happening with my device after the light goes off I do not know how to have the backlight on again.
Please help me.
This works on the Tytn 2
Edit the registry with a program like "PHM Registry"
HKEY_Current_User
Contol Panel
Backlight
Change QKeyLedTimeout to "n" seconds
Hey guys, I know that the Kaiser has a light sensor to tell the keyboard when to light up (at least I think I read that somewhere)... So does anyone know a program that uses this light sensor to adjust the backlight of the screen according to how bright it is outside? I would love it so that when I'm indoors the backlight is dimmer to save battery, but when outside in direct sunlight it gets brighter so I can see it well. Anyone know if this is plausible?
If a program doesn't exist, I'd really like to develop one. However, considering I have no experience, I would need considerable help. If someone is interested in developing this, that would be awesome!
SectorNine50 said:
Hey guys, I know that the Kaiser has a light sensor to tell the keyboard when to light up (at least I think I read that somewhere)... So does anyone know a program that uses this light sensor to adjust the backlight of the screen according to how bright it is outside? I would love it so that when I'm indoors the backlight is dimmer to save battery, but when outside in direct sunlight it gets brighter so I can see it well. Anyone know if this is plausible?
If a program doesn't exist, I'd really like to develop one. However, considering I have no experience, I would need considerable help. If someone is interested in developing this, that would be awesome!
Click to expand...
Click to collapse
I don't think there are any light sensors on the Kaiser.The keyboard just lights up anytime when you want it, I think there is a setting for that.
to the left of the letter q on the qwerty keyboard there is a sensor that makes the keyboard light up when it is dark
If you press a key and it is dark, the keyboard backlight will invoke, and if its light out and you press the keyboard, the backlight does not invoke.
what dyou mean lights out
the backlight will light up whenever the sensor next to the q senses no light
jayjay8585 said:
what dyou mean lights out
the backlight will light up whenever the sensor next to the q senses no light
Click to expand...
Click to collapse
He said when it's light out, as in when there is a lit environment.
Anyone have any ideas how to tap into that sensor? Or perhaps have the lens of the camera sense light when the keyboard is closed somehow for the backlight? Am I thinking way to hard about this? lol
keyboard light sensor
Turning off light sensor for keyboard:
Start/settings/buttons/backlight tab/uncheck "enable keyboard backlight auto sensor". That's it.
Cheers
Keyboard Backlight Time-Out
My backlight comes on fine, but no matter how dark it is, it will not stay on for more than a few seconds. So then I have to hit just ANY old key to try and start typing again.
Anyone know how to make the KEYBOARD backlight stay on longer?
Thanks.
When i slide the keyboard out the light goes on(nothing wrong here).
Then when i wait a short time the light goes off, but when i press a key again the light doesn't go on again.
I have the HTC wm6.1 rom on my Tytn2.
Are there more people with this issue and is there a fix for it?
anybody???
Do the keys actually work, despite the fact that the light doesn't go on?
read about kaiser keyboard backlight time-out issues...
Hey... Sometimes my keyboard light and my keypad light don't turn on when I open the keyboard or just press a button like the panels button. Is there any way to adjust these?? Sometimes its one that doesn't turn on, and then sometimes its just the keypad lights. Any Suggestions? plz help me thank`s so much
Just a guess, it could be the auto adjust backlight function.. try turning it off
dshiu said:
Just a guess, it could be the auto adjust backlight function.. try turning it off
Click to expand...
Click to collapse
i tried it but it not working plz help somebody help me