Hey Guys I really need your help my N1 won't power on for some reason. I really need to get some things off the phone from certain software that I had in case I have to have it repaired or sent away. I'll try to be brief what happened I was exercising with my phone inside a protective case that covers the whole phone and I went to change the next song while listening to music and when i went to push the power button the screen remained black the whole time and I couldn't see anything at all the screen was black the whole time after numerous attempts at pushing the power button. So I held down the power button to try and reboot it and then the music stopped, so then I hit the power button again to turn it on and it hasn't turned on since yesterday. I even took the battery out and let it chill for a min and still doesn't work. when I plug it in to the charger the orange/green light comes on and as well with the USB connection too, but still can get it to power on.
Anyone have any Idea what it could be? I am assuming it's the power button but I am not for sure. Is there anyway to turn it on again in case i need to recover any files, etc. the reason i want to get it to work is that I don't want to have to go through the hassle of sending it away to be repaired if there is some way I can do it myself. I am trying to avoid sending it away with my carrier and I really need to access certain files on the phone if all else fails. If anyone has any ideas I'd appreciate it thnx to anyone.
If it's a power button failure, you can put the phone on charge, then remove and reinsert the battery... keep trying, it will turn on eventually...
http://www.androidguys.com/2010/09/08/manage-nexus-broken-power-button/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed:+androidguyscom+(AndroidGuys)&utm_content=Google+Reader
Sent from my Nexus One using XDA App
it worked the first time I did it thank you so much well just in case it ever happens again how can I back up some things on my apps for example I have notes on AK notepad how would I back those up? and if I wanted to move some software to my sd card that doesn't allow it?
Hey thanks again you are a life saver!!!!!!!!
oh darn the X came up when I powered it up but still nothing just a black screen I got all excited for nothing
i got after 5 or so times of taking the battery out thnx again is there a way or software to make the N1 awake or power off with the trackball without rooting it since the power switch is buggy now?
Titanium Backup will backup apps and data to SD card.
Widget Locker has an option for trackball wake.
LockEnabler will let you turn screen off/sleep.
Quick Boot will let you reboot, boot into recovery etc. Be careful booting into recovery or boot loader, because power button is used to navigate (you have to use adb).
Sent from my Nexus One using XDA App
thnx again is there anyway to restart/reboot the phone if it is not rooted via trackball or another button?
Reboot is possible with Quick Boot (as noted above), but if you ever turn off then the battery toggle is your only option...
Sent from my Nexus One using XDA App
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.
Hi guys,
The following problem has taken me litterally DAYS of reading XDA, trying everything I could, but still no solution. Googling and searching this forum didn't help either, and it's totally weird.
It's a Samsung Galaxy S GT-I9000, on which were installed, almost two years ago, the ClockWorkMod recovery, Darky's ROM, Froyo, and everything was fine for months. Then, one day, out of nowhere, it switched off, without notice. Impossible to switch it on again! I remembered having seen some strange battery behavior few days before, like falling from 80% to 30% with no reason, so I thought of a battery issue. I plugged it for a full night. In the morning, I was able to boot it, but not easily, and all apps were crashing: during boot, or when launched manually. Yes, all I tried were crashing! Then, the phone became fully not bootable: press the power button, the screen shows "Samsung GT-I9000", then switches off...
I ordered a new battery: same result.
A guy from a phone repair store told me to plug the phone, and keep the power button down for 2 minutes: after this, I could reboot the phone, and thus, wipe data (factory reset). But it didn't help.
After "playing" a bit with it, I realized that the problem is:
the phone won't boot if an external source of power is not connected (as said above, white text shows, then the phone "dies")
if started with power cord/usb, the phone will work fine, all the time
if started with power cord/usb, and the external power source removed once the phone is booted, the phone will work fine, UNTIL the screen goes black for power saving mode or by pressing pwoer button, after which, within seconds, you can't open the phone anymore. I mean: if you press the start/power button immediately after the screen goes black, the screen goes on again, and the phone is ok. If you wait for few seconds, it's over, you can't do anything, and have to reboot the phone. This said, the phone doesn't vibrate, so I suppose it's not really off. But then... what is this state??
I really tried my best: updated to GB2.3.6, bricked my phone trying to re-install the CWM and having a bootloop, installed and used Odin and Heimdall, reverted to stock kernel, etc, etc, etc.
I feel sorry to bother you guys, I was really convinced that with the incredibly huge amount of data, how-tos, explanations, etc. I would manage to get rid of this, but this problem, though I don't really think it's hardware (but maybe it is?) stayed across so many kernels, roms, etc. that it's killing me!
For the record:
Model number: GT-I9000
Micro-software (?): 2.3.6
Baseband: I9000XXJW4
Kernel: 2.6.35.7-I9000XWJW7-CL1125830 [email protected] #2 (problem was the same with [email protected] #2)
Version number: GINGERBREAD.XXJW4
Any help would be greatly appreciated, considering that a wireless phone that needs to be wired is a little bit of an issue... :laugh:
Thanks in advance !
Marc_B_ said:
Hi guys,
The following problem has taken me litterally DAYS of reading XDA, trying everything I could, but still no solution. Googling and searching this forum didn't help either, and it's totally weird.
It's a Samsung Galaxy S GT-I9000, on which were installed, almost two years ago, the ClockWorkMod recovery, Darky's ROM, Froyo, and everything was fine for months. Then, one day, out of nowhere, it switched off, without notice. Impossible to switch it on again! I remembered having seen some strange battery behavior few days before, like falling from 80% to 30% with no reason, so I thought of a battery issue. I plugged it for a full night. In the morning, I was able to boot it, but not easily, and all apps were crashing: during boot, or when launched manually. Yes, all I tried were crashing! Then, the phone became fully not bootable: press the power button, the screen shows "Samsung GT-I9000", then switches off...
I ordered a new battery: same result.
A guy from a phone repair store told me to plug the phone, and keep the power button down for 2 minutes: after this, I could reboot the phone, and thus, wipe data (factory reset). But it didn't help.
After "playing" a bit with it, I realized that the problem is:
the phone won't boot if an external source of power is not connected (as said above, white text shows, then the phone "dies")
if started with power cord/usb, the phone will work fine, all the time
if started with power cord/usb, and the external power source removed once the phone is booted, the phone will work fine, UNTIL the screen goes black for power saving mode or by pressing pwoer button, after which, within seconds, you can't open the phone anymore. I mean: if you press the start/power button immediately after the screen goes black, the screen goes on again, and the phone is ok. If you wait for few seconds, it's over, you can't do anything, and have to reboot the phone. This said, the phone doesn't vibrate, so I suppose it's not really off. But then... what is this state??
I really tried my best: updated to GB2.3.6, bricked my phone trying to re-install the CWM and having a bootloop, installed and used Odin and Heimdall, reverted to stock kernel, etc, etc, etc.
I feel sorry to bother you guys, I was really convinced that with the incredibly huge amount of data, how-tos, explanations, etc. I would manage to get rid of this, but this problem, though I don't really think it's hardware (but maybe it is?) stayed across so many kernels, roms, etc. that it's killing me!
For the record:
Model number: GT-I9000
Micro-software (?): 2.3.6
Baseband: I9000XXJW4
Kernel: 2.6.35.7-I9000XWJW7-CL1125830 [email protected] #2 (problem was the same with [email protected] #2)
Version number: GINGERBREAD.XXJW4
Any help would be greatly appreciated, considering that a wireless phone that needs to be wired is a little bit of an issue... :laugh:
Thanks in advance !
Click to expand...
Click to collapse
That's a very strange problem... let's try something, remove the battery, sim card and sd card and hold the power button for 1-2 minutes, btw when the screen is off, is really the phone off or just the screen? did you try to make a call to your phone when the screen is off?
timberman4444 said:
That's a very strange problem... let's try something, remove the battery, sim card and sd card and hold the power button for 1-2 minutes, btw when the screen is off, is really the phone off or just the screen? did you try to make a call to your phone when the screen is off?
Click to expand...
Click to collapse
Hi timberman thanks for the answer!
You're very right: I totally forgot to say that what initially allowed me to restart my phone "regularly" was this procedure of pressing the power button for 2 minutes (hint given by a man from a repair shop). Before this, I couldn't (kind of a bootloop).
It's a very good question! I don't think the phone is really off in fact, because there isn't this vibration saying the phone turned off... Let me try to call it!
F..k! I was redirected right away to the voicemail... so... phone was off
I'm starting to think it's an harware issue... I reinstalled lots of ROMs, kernel, etc. Same ****...
Any idea?
Marc_B_ said:
Hi timberman thanks for the answer!
You're very right: I totally forgot to say that what initially allowed me to restart my phone "regularly" was this procedure of pressing the power button for 2 minutes (hint given by a man from a repair shop). Before this, I couldn't (kind of a bootloop).
It's a very good question! I don't think the phone is really off in fact, because there isn't this vibration saying the phone turned off... Let me try to call it!
F..k! I was redirected right away to the voicemail... so... phone was off
I'm starting to think it's an harware issue... I reinstalled lots of ROMs, kernel, etc. Same ****...
Any idea?
Click to expand...
Click to collapse
Hi mark, i'm totally out of ideas for your problem... anyway, maybe you read mi answer wrong, in your post you say that the guy in the repair shop tell yo to press the power button with THE PHONE PLUGGED IN, but what i say is press the power button 2 minutes WITHOUT BATTERY, btw i keep thinking about this.. if any idea comes to my mind i tell you.
Hi again, try to play a song and turn the screen off to see what happens.
Sent from my GT-I9000 using xda app-developers app
timberman4444 said:
Hi mark, i'm totally out of ideas for your problem... anyway, maybe you read mi answer wrong, in your post you say that the guy in the repair shop tell yo to press the power button with THE PHONE PLUGGED IN, but what i say is press the power button 2 minutes WITHOUT BATTERY, btw i keep thinking about this.. if any idea comes to my mind i tell you.
Click to expand...
Click to collapse
Hi! Answering is already nice
I tried the button pressed for 2 minutes without battery: didn't change anything.
I tried playing a sound: MAN, YOU'RE A GENIUS!!! Launching the music, then forcing the screen off with power button lets the music play, and OF COURSE, I can reactivate the screen by pressing the home button. The screen goes off normally again after few seconds, but the music is still playing, etc. So, as long as the music goes, the bug doesn't happen!
Other hints:
For some time already, when I was removing the phone from my ear after a call, quite often, the screen was staying off, and I had to press a lot of buttons to have it on again, and be able to close the call
The moment where it crashes when booting without power is the very INSTANT where the initial white text (Samsung Galaxy S) goes brighter. So, if you unplug the power cord just after this, the boot ends normally. In summary, something happens at boot just after screen brightness changes which is the same thing happening when the screen goes off for power saving. All this, only when no external power is plugged.
Hehe, we (you) are making progress
Marc_B_ said:
Hi! Answering is already nice
I tried the button pressed for 2 minutes without battery: didn't change anything.
I tried playing a sound: MAN, YOU'RE A GENIUS!!! Launching the music, then forcing the screen off with power button lets the music play, and OF COURSE, I can reactivate the screen by pressing the home button. The screen goes off normally again after few seconds, but the music is still playing, etc. So, as long as the music goes, the bug doesn't happen!
Other hints:
For some time already, when I was removing the phone from my ear after a call, quite often, the screen was staying off, and I had to press a lot of buttons to have it on again, and be able to close the call
The moment where it crashes when booting without power is the very INSTANT where the initial white text (Samsung Galaxy S) goes brighter. So, if you unplug the power cord just after this, the boot ends normally. In summary, something happens at boot just after screen brightness changes which is the same thing happening when the screen goes off for power saving. All this, only when no external power is plugged.
Hehe, we (you) are making progress
Click to expand...
Click to collapse
Hi again, it seems like your phone is unable to exit the deep sleep mode or something like that so, let`s try another thing, in ICS or JB there´s an option in the developer option settings that unfortunately is not present in gingerbread roms, so, you can try to switch to a ICS/JB rom and go to settings-developer options and disable the "PM sleep mode" let`s see what happens then
timberman4444 said:
Hi again, it seems like your phone is unable to exit the deep sleep mode or something like that so, let`s try another thing, in ICS or JB there´s an option in the developer option settings that unfortunately is not present in gingerbread roms, so, you can try to switch to a ICS/JB rom and go to settings-developer options and disable the "PM sleep mode" let`s see what happens then
Click to expand...
Click to collapse
I tried to install ICS, with a GREAT tutorial found here: http://forum.xda-developers.com/showthread.php?t=1494493 Sadly, the phone reboots after installing the ICS kernel, and then doesn't work anymore, I had to reinstall the Gingerbread (I tried twice).
Last news: I let the phone play music (sound muted!!) for about 12 or 18h: all was fine! So I decided to pause the music, and see what happens. Boom ((c) Steve Jobs)!! The screen went black, and phone was "dead". I was expecting this, so no panick, I put back my SIM card, my SD card, and tried to reboot, with power cord plugged: it boots until the screen shows the small loader animation, then the empty battery image, but then goes black again, instead of showing the charging battery!! Download mode is still available, so I'll try to reflash the kernel, say.
It's like if each time screen was put black, phone was dying.
I can't stress enough how I appreciate your help: even if we can't save my phone, it's very pleasant to be able to TRY things. Thanks man!! :good:
Update: I reinstalled all... and it's not, even with power cord in, going further than the "Samsung Galaxy S" white text. The moment this picture disappears from screen, phone is dead. For good this time ?
Marc_B_ said:
I tried to install ICS, with a GREAT tutorial found here: http://forum.xda-developers.com/showthread.php?t=1494493 Sadly, the phone reboots after installing the ICS kernel, and then doesn't work anymore, I had to reinstall the Gingerbread (I tried twice).
Last news: I let the phone play music (sound muted!!) for about 12 or 18h: all was fine! So I decided to pause the music, and see what happens. Boom ((c) Steve Jobs)!! The screen went black, and phone was "dead". I was expecting this, so no panick, I put back my SIM card, my SD card, and tried to reboot, with power cord plugged: it boots until the screen shows the small loader animation, then the empty battery image, but then goes black again, instead of showing the charging battery!! Download mode is still available, so I'll try to reflash the kernel, say.
It's like if each time screen was put black, phone was dying.
I can't stress enough how I appreciate your help: even if we can't save my phone, it's very pleasant to be able to TRY things. Thanks man!! :good:
Update: I reinstalled all... and it's not, even with power cord in, going further than the "Samsung Galaxy S" white text. The moment this picture disappears from screen, phone is dead. For good this time ?
Click to expand...
Click to collapse
you tried to install the rom on the recovery instead of odin?
timberman4444 said:
you tried to install the rom on the recovery instead of odin?
Click to expand...
Click to collapse
Hi! No, I didn't, I used Odin. But now, I can't try anything anymore The only "results" I can get from this phone are:
- enter download mode and update from Odin (maybe from Heimdall, too, but I didn't check)
- reboot until the first moment the screen goes black, after which, the phone becomes fully unresponsive
Marc_B_ said:
Hi! No, I didn't, I used Odin. But now, I can't try anything anymore The only "results" I can get from this phone are:
- enter download mode and update from Odin (maybe from Heimdall, too, but I didn't check)
- reboot until the first moment the screen goes black, after which, the phone becomes fully unresponsive
Click to expand...
Click to collapse
so, you can`t install any rom at the moment?
timberman4444 said:
so, you can`t install any rom at the moment?
Click to expand...
Click to collapse
I can! I can install any kernel, or ROM, trhough Odin, but I can't boot at all... Except if someone has a magical trick, I would say it smells like coffin...
Marc_B_ said:
I can! I can install any kernel, or ROM, trhough Odin, but I can't boot at all... Except if someone has a magical trick, I would say it smells like coffin...
Click to expand...
Click to collapse
Pretty bad signals there.. i think you should go to a repair shop or buy another device
timberman4444 said:
Pretty bad signals there.. i think you should go to a repair shop or buy another device
Click to expand...
Click to collapse
Sadly, yes... thanks for helping however !