Related
Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Anyone? .
hi
ive never used rom manager so cant comment on that but why dont you go into dev forum and check out the roms there and on the OPosts theres directions that are easy to follow
most of the kernals have recovry built in
regards
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
I'm not entirely sure, as I don't use Rom Manager either, but I believe that only flashes it so you're only able to access it using Rom Manager. Is there any option within Rom Manager that allows you to boot into CWM?
In my opinion your best bet would be to flash a kernel with integrated CWM, or ideally a whole new custom rom. Much easier.
icecold601 said:
Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Click to expand...
Click to collapse
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
stan28 said:
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
Click to expand...
Click to collapse
You do not need to "downgrade" you just need to install a different kernel.
I recommend this one http://forum.xda-developers.com/showthread.php?t=822756
Make sure you read through the thread all the answers your looking for are in there.
Hi there,
Since gingerbread with most probably be the last update for SGS i would like to install a custom mod.
Now i have been trying to do this (darky 10 RC4) for the past 2 days.
I followed Darky's instructions then i had a problem with the CWM only accepting "edified" script.
So i downloaded rom manger and tried to downgrade ta 2.5 but as soon as i tap on the 2.5 it immediately comes up with an error, "an error occured while flashing your recovery."
this is done on a 2.3.3 JVB SGS with CWM 3 installed (orange text).
Are there alternate routes? maybe downgrading to android 2.2 installing an older version of darky and than upgrading the darky rom?
any help is much appreciated.
thanks
Download the rom CWM-zip and put it in your internal sdcard.
Download some froyo-kernel (yes, froyo) with CWM 2.5. Speedmod for example. Then flash it with Odin repartition and auto-reboot unticked. When the flashing process is completed, pull the battery and then boot to recovery (3 button combo). Now you have CWM 2.5 and you can flash the CWM-zip from there.
thanks, i wil try that.
Now you have CWM 2.5 and you can flash the CWM-zip from there.
Click to expand...
Click to collapse
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?
jan-sgs said:
thanks, i wil try that.
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?
Click to expand...
Click to collapse
Sorry. With CWM-zip I meant the Darky's Rom.zip, which can be flashed through CWM.
it didnt work, u just gave up.
hopefully some new rom update that is edified will show up in a couple of months
Install supercurio hacked kernel, it has recovery 2.5 instead of 3.0.0.5. From there you should be able to install darky's rom. If the new version of his kernel is recovery 3, tell me i'll send the old one just for the purpose.
Hi,
ok last attempt
i flashed ( odin PDA, no pit and no repartition) with this link:
Kernel Download:
Gingerbread-GT-I9000-stock-kernel+hacks.tar
http://forum.xda-developers.com/showthread.php?t=975349
while i was on
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
rooted with root CF-Root-XX_OXA_JVK-v3.1-CWM3RFS
and lag fixed with CF-Root-ext4-v1.2
and it forking worked red text 2.5 THANKS A BUNCH!
edit just a problema. it is only booting in CWM.
reattempting this without the lag fix.
2nd attempt with PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
and without lag fix not rooting.
phone stuck looping at booting with strange sound on each boot loop
3rd attempt with rooting, but no lagfix
If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.
chadouming said:
If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.
Click to expand...
Click to collapse
ok, i couldnt do that before because i had deleted the rom form the internal SD.
and also thanks for pointing out that i had the wrong root (i worked by you never know if it could case problems)
ok so
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
root CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
lagfix CF-Root-ext4-v1.2-Addon
and
Gingerbread-GT-I9000-stock-kernel+hacks
and the zip is in progress.
ps it wasnt stuck the previous time, i was pressing the middle key as the selection while i should have been pressing the power button.
thanks for your help very much appreciated.
if i get some free time i will write at tutorial since i could not the solution.
This isn't development, moved to Q&A
Dear All
I installed ICS LPD by mobile odin pro to keep the root, and evryting is ok, but i lost the cwm recovery app, I want to install speed mod kernel, because they say it will install CWM , but they also say it will install root, while I have already root, what to do
Some people have problems with franco Ics kernel, any comments?
thermax04 said:
Dear All
I installed ICS LPD by mobile odin pro to keep the root, and evryting is ok, but i lost the cwm recovery app, I want to install speed mod kernel, because they say it will install CWM , but they also say it will install root, while I have already root, what to do
Some people have problems with franco Ics kernel, any comments?
Click to expand...
Click to collapse
I'm Looking for the same, as NO instructions are there for our version of Kernel which is LPD.
Any ideas guys?
:crying:
thermax04 said:
Dear All
I installed ICS LPD by mobile odin pro to keep the root, and evryting is ok, but i lost the cwm recovery app, I want to install speed mod kernel, because they say it will install CWM , but they also say it will install root, while I have already root, what to do
Some people have problems with franco Ics kernel, any comments?
Click to expand...
Click to collapse
Just use your mobileodin and download speedmod k3-9 in tar file and flash, thats all.
As far the CWM App , you need to install CF root kernel for it. But all other kernels by default give you access to the CWM Recovery.
I was on stock ICS, i flashed the latest notecore kernel after i got root, and then flashed another kernel, and now when i rebooted it it decided not to start, i cannot get into recovery however i can get into download mode, i however do not know how to use this, i have drivers installed to my computer, but am unsure if i need kies aswell. could somebody please help me as its really really late here but i am unable to sleep as i need my phone in the morning! thanks.
killarhye said:
I was on stock ICS, i flashed the latest notecore kernel after i got root, and then flashed another kernel, and now when i rebooted it it decided not to start, i cannot get into recovery however i can get into download mode, i however do not know how to use this, i have drivers installed to my computer, but am unsure if i need kies aswell. could somebody please help me as its really really late here but i am unable to sleep as i need my phone in the morning! thanks.
Click to expand...
Click to collapse
Safest way is to flash stock GB or pre-rooted GB firmware using PC odin.
killarhye said:
I was on stock ICS, i flashed the latest notecore kernel after i got root, and then flashed another kernel, and now when i rebooted it it decided not to start, i cannot get into recovery however i can get into download mode, i however do not know how to use this, i have drivers installed to my computer, but am unsure if i need kies aswell. could somebody please help me as its really really late here but i am unable to sleep as i need my phone in the morning! thanks.
Click to expand...
Click to collapse
Flash this pre rooted GB Rom using PC Odin
http://d-h.st/HJM
Your phone must be in Download mode and don't change any settings in PC Odin. Just select the file under PDA tab and Hit Start
Easiest way you can try first, otherwise go long way as above said by jeetu & sahil
Flash Notecore kernel (.tar vesion)with PC odin (for PDA tab)
Later reset flash counter with Triangle Away.
This thing happened to me today as well, from my other post:
I installed CleaNote ROM and it worked fine (restored all my apps via titanium backup) then I rebooted to recovery and installed NoteCore 14 kernel and 15toggle zip which was recommended for the ROM. Now i am stuck in white boot up GT-N7000 screen and cannot go back to recovery mode. I can only go to download mode.
Any links to the TAR version of notekernel and flash counter? Thanks
UPDATE: ITWORKS! Thanks dr.ketan, I flashed the Notecore kernel TAR and now it boots up. Used triangle away from Google play to remove triangle. Again, thanks a lot
gx3k said:
This thing happened to me today as well, from my other post:
I installed CleaNote ROM and it worked fine (restored all my apps via titanium backup) then I rebooted to recovery and installed NoteCore 14 kernel and 15toggle zip which was recommended for the ROM. Now i am stuck in white boot up GT-N7000 screen and cannot go back to recovery mode. I can only go to download mode.
Any links to the TAR version of notekernel and flash counter? Thanks
Click to expand...
Click to collapse
hold 3 button home+up+power when GT-7000 logo on dont release its keep holding until screen go blank that time release 3 button.its will put you back to CWM. Happen to me couple time and its what i did..good luck
aha look like you back on track now.Everywhere should be fine when had Dr.Ketan,,,,,
try to flash pre-rooted GB firmware using PC odin.
gx3k said:
This thing happened to me today as well, from my other post:
I installed CleaNote ROM and it worked fine (restored all my apps via titanium backup) then I rebooted to recovery and installed NoteCore 14 kernel and 15toggle zip which was recommended for the ROM. Now i am stuck in white boot up GT-N7000 screen and cannot go back to recovery mode. I can only go to download mode.
Any links to the TAR version of notekernel and flash counter? Thanks
UPDATE: ITWORKS! Thanks dr.ketan, I flashed the Notecore kernel TAR and now it boots up. Used triangle away from Google play to remove triangle. Again, thanks a lot
Click to expand...
Click to collapse
and u got 15 toggle or stock toggle?
gx3k said:
This thing happened to me today as well, from my other post:
I installed CleaNote ROM and it worked fine (restored all my apps via titanium backup) then I rebooted to recovery and installed NoteCore 14 kernel and 15toggle zip which was recommended for the ROM. Now i am stuck in white boot up GT-N7000 screen and cannot go back to recovery mode. I can only go to download mode.
Any links to the TAR version of notekernel and flash counter? Thanks
Click to expand...
Click to collapse
Exactly same thing happens to me this morning. So something is up with the NoteCore 14 kernel Recovery. Its fine till you try to access it.
oalex said:
Exactly same thing happens to me this morning. So something is up with the NoteCore 14 kernel Recovery. Its fine till you try to access it.
Click to expand...
Click to collapse
V14 took a long time to launch CWM, approximately 30 seconds, but it does launch eventually and does work as normal.
So it doesn't get stuck it just takes time...... Patience is all you need.
This is fixed in v14.1.
I upgraded from v14 to v14.1 last night without any problems and can confirm that the CWM launch delay is now fixed.
I have installed all NoteCore kernels since v3 and never had a major problem.
Sent from my GT-N7000 using xda premium
killarhye said:
I was on stock ICS, i flashed the latest notecore kernel after i got root, and then flashed another kernel, and now when i rebooted it it decided not to start, i cannot get into recovery however i can get into download mode, i however do not know how to use this, i have drivers installed to my computer, but am unsure if i need kies aswell. could somebody please help me as its really really late here but i am unable to sleep as i need my phone in the morning! thanks.
Click to expand...
Click to collapse
Exactly had the same problem ...
http://forum.xda-developers.com/showpost.php?p=30561024&postcount=2276
---------- Post added at 01:06 PM ---------- Previous post was at 01:04 PM ----------
simplelife said:
hold 3 button home+up+power when GT-7000 logo on dont release its keep holding until screen go blank that time release 3 button.its will put you back to CWM. Happen to me couple time and its what i did..good luck
aha look like you back on track now.Everywhere should be fine when had Dr.Ketan,,,,,
Click to expand...
Click to collapse
If it works ... this can be the only saviour. other than download mode.
gx3k said:
This thing happened to me today as well, from my other post:
I installed CleaNote ROM and it worked fine (restored all my apps via titanium backup) then I rebooted to recovery and installed NoteCore 14 kernel and 15toggle zip which was recommended for the ROM. Now i am stuck in white boot up GT-N7000 screen and cannot go back to recovery mode. I can only go to download mode.
Any links to the TAR version of notekernel and flash counter? Thanks
UPDATE: ITWORKS! Thanks dr.ketan, I flashed the Notecore kernel TAR and now it boots up. Used triangle away from Google play to remove triangle. Again, thanks a lot
Click to expand...
Click to collapse
I found the same trying to install the 15toggle zip, you could try your original method without the 15toggle zip and it will most likely work.
Hi all. Please note that the NoteCore V14.0 has a delay of about 30 to 60 seconds before it enters recovery. Just sit and hold your breath until your fact turns blue and voila, you are in recovery. V14.1 solves the problem of this long delay.
Hi Guys,
V14 had the issue with CWM... once u boot to recovery donot do anything,, wait for the screen to load.. it will do it eventually.
New notecore
Changelog
v14.1
- Fixed laggy CWM
- Removed JRCU switched to a differently configured standard fanout RCU
- TinySHMEM instead of full SHMEM
- Added, and enabled KSM page merging
- Memory compaction optimised
- ARM optimised RWSEM algorithm
- Switched back to a *slightly* altered SLQB heap allocator
- Kernel scheduler latencies reduced
- Some .config changes
- Some initramfs changes
- Improved responsiveness at low frequencies with ondemand governor
- Touchscreen sensitivity tweaks
- Compiled with googles standard toolchaing, but with all linaro's optimisation flags
- Improved performance!
arinsms said:
and u got 15 toggle or stock toggle?
Click to expand...
Click to collapse
Yes, the recommended 15 toggle which was originally for LRK now works with CleaNote5 ROM, although I went back to the default ROM (NoteCore 12.3)as the newer versions of NoteCore kernel seems to be buggy for me
i flashed to 4.2.2 this morning but i didn't like it so i decided to go back to stock jelly bean but i can't !! kies wont connect to my phone it would just keep loading and loading and never actually open the phone itself so i tried downloading the drivers manually but then odin doesn't recognize at all i tried unitsalling kies , updating , reinstalling nothing would ever work ! but y laptop recognizes the device and i can acess the files but other then this nothing
====update=====
i tried flashing with mobile odin and now it is stuck on samsung blue logo just keeps doing the animation over and over so i connected to pc and odin recgonized and flashed the rom again but then it is stuck on a boot loop and i tried wiping cache and factory data reset but wont work
What rom did you flash. Ics or JB. Install Philz kernel and do a wipe data reboot. If still no go then wipe system data cache and preload and reboot into download mode and flash stock rom again.
Rebooting in recovery and clearing cache and dalvik cache may help..
same problem here.
Mayank Chandwani said:
Rebooting in recovery and clearing cache and dalvik cache may help..
Click to expand...
Click to collapse
It didn't here. I went back from XXLT4 (rooted) to XXLT4 (stock non-root) using ODIN, and the problem was gone. Then I flashed PhilZ 4.93.6 kernel, and the problem was back. No connection, neither USB or Wifi. I was on a rooted stock kernel before, but have no idea what the problem was.
So, as soon as I root the firmware, the connectivity is gone.
Update: it's back. I have no idea why, I'm still on XXLT4 + latest PhilZ kernel.
Next problem: Where can I edit the newly added lockscreen shortcuts? Could it be that flashing PhilZ kernel removed that feature from the settings menu? I can't find it... and I've definitely seen it before I rooted.
zazzel said:
It didn't here. I went back from XXLT4 (rooted) to XXLT4 (stock non-root) using ODIN, and the problem was gone. Then I flashed PhilZ 4.93.6 kernel, and the problem was back. No connection, neither USB or Wifi. I was on a rooted stock kernel before, but have no idea what the problem was.
So, as soon as I root the firmware, the connectivity is gone.
Update: it's back. I have no idea why, I'm still on XXLT4 + latest PhilZ kernel.
Next problem: Where can I edit the newly added lockscreen shortcuts? Could it be that flashing PhilZ kernel removed that feature from the settings menu? I can't find it... and I've definitely seen it before I rooted.
Click to expand...
Click to collapse
Why do you want to flash Philz kernel..just root your phone on the stock kernel..JB stock kernel is bug free..
Go to settings--lock screen--swipe and there you have the option to change it on stock lock screen..do you have a custom lock screen??
Mayank Chandwani said:
Why do you want to flash Philz kernel..just root your phone on the stock kernel..JB stock kernel is bug free..
Go to settings--lock screen--swipe and there you have the option to change it on stock lock screen..do you have a custom lock screen??
Click to expand...
Click to collapse
Thanks! I used PhilZ because it came with cwm, built in root and was easily available.
Do you know how to go back to stock kernel without a full install? (and keep cwm and root). Something like a XXLT4 German / DBT kernel in a ZIP zile I can flash from recovery? I simply don't know where to find that.
Mybe SCS information is missing.*#1234# and view SCS code.
My CSC information is currently "N7000OXALT4" and nothing more. I was half expecting "DBT" behind that. Could that really be the problem?
Looks like I should go for a new nandroid backup & CSC reset?
zazzel said:
Thanks! I used PhilZ because it came with cwm, built in root and was easily available.
Do you know how to go back to stock kernel without a full install? (and keep cwm and root). Something like a XXLT4 German / DBT kernel in a ZIP zile I can flash from recovery? I simply don't know where to find that.
Click to expand...
Click to collapse
The stock kernel is the zImage which is included in the stock rom, and can be flashed.
qnt said:
The stock kernel is the zImage which is included in the stock rom, and can be flashed.
Click to expand...
Click to collapse
Thanks, I figured that out in the meantime, packed zImage into another flashable ZIP and signed it. Now I can theoretically flash it using "mobile ODIN" (to keep root) or from CWM. It's still not the perfect solution since I would definitely want CWM. So currently, I keep running PhilZ and wait for a better solution for the lockscreen icon issue.
whats the issue with lock screen? sorry for asking but after reading the thread i got confused.