[Q] v20l vs v20m - LG Optimus 2x

Hi
I've got the v20l installed on my device.I was thinking, which are the differences between v20l and v20m? Any bug fixed? It would be convenient for me to update the phone?
Thanks
Best regards
Stefano

scompiani said:
Hi
I've got the v20l installed on my device.I was thinking, which are the differences between v20l and v20m? Any bug fixed? It would be convenient for me to update the phone?
Thanks
Best regards
Stefano
Click to expand...
Click to collapse
- V20m is better v20l, baseband same v20l,
- RAM manager is better v20l, your phone is not slowly after a long time
- Free RAM at first boot is more 160MB

bactuong said:
- V20m is better v20l, baseband same v20l,
- RAM manager is better v20l, your phone is not slowly after a long time
- Free RAM at first boot is more 160MB
Click to expand...
Click to collapse
V20m Ram management is better than V20l. V20m is a bit faster.
But the leaked V20o is the best stock GB firmware.

Flix123 said:
V20m Ram management is better than V20l. V20m is a bit faster.
But the leaked V20o is the best stock GB firmware.
Click to expand...
Click to collapse
At the end I've installed the v20o and now the mobile runs as a rocket! Just a curiosity, do you advice me to install Horsepower kernel too? And what about Gps FIX?

scompiani said:
At the end I've installed the v20o and now the mobile runs as a rocket! Just a curiosity, do you advice me to install Horsepower kernel too? And what about Gps FIX?
Click to expand...
Click to collapse
In V20o, you don't need a GPS Fix anymore.
I recommend the Horsepower SR2 Kernel and Performance Pack V9. You have to install it in Clockworkmod with install zip from sdcard.

Flix123 said:
In V20o, you don't need a GPS Fix anymore.
I recommend the Horsepower SR2 Kernel and Performance Pack V9. You have to install it in Clockworkmod with install zip from sdcard.
Click to expand...
Click to collapse
WHAT BASEBAND AND RIL IS PREFFERED????

THAT DEPENDS WHERE YOU LIVE, IF YOU DECIDE TO FLASH BB ONCE YOURE RISKING SEARCHING AND FLASHING TILL YOUR NEEDS ARE SATISFIED. SOME CUSTOM ROMS RECOMMEND CERTAIN BB, BUT STILL IT HAS TO MATCH YOUR HOME LOCATION WITH RIL OF YOUR CHOICE. CAN WE AGREE THAT THIS IS SOLVED?
BEST WISHES
SuperSkill ;-)
Sent from my LG-P990 using xda premium

It isn't complicated.
Just flash V20m baseband and the V20o. The correct ril is integrated in the rom.

where i get the V20o? can you post a link?

Why don't you search by yourself? There's only two clicks between this thread and what your want .

sganach said:
where i get the V20o? can you post a link?
Click to expand...
Click to collapse
Just for you: LINK!!!

Thank you Flix, i followed your advice installing HP RC11-R Kernel and Performance pack V10, disabling scrolling cache and lagging and now my device runs faster and faster!
Before doing it, i was attempting to install your All in One Tweaks pack but after the mobile didn't boot, so i had to run backtoext3 and re-install every package. Any suggestion? The package converts sd to ext4? Performance Pack V10, i noticed contains same ext4 tweaks, works without any problem.
P.S. I tried to modify the battery display with a package made by me on Uot Kitchen but i cannot install it, CWM finds an error and aborts the procedure. How did you do it?

scompiani if you accept a suggestion try the thanatos rom
before i was on the leaked v20o and now with this rom is another world belive me!
soon will be released the 5.2 with the new kernel version and new tweaks and optimizations

alakyr said:
scompiani if you accept a suggestion try the thanatos rom
before i was on the leaked v20o and now with this rom is another world belive me!
soon will be released the 5.2 with the new kernel version and new tweaks and optimizations
Click to expand...
Click to collapse
I tried the one based on v20l and i didn't like it very much, maybe i'll try soon this new version, as you suggest me thanks
actually i have hp extreme kernel and my device goes very fast

the differences are so small, i don't think you would even notice them

Agree V20o is the best Room

Hello guys.
Any idea when this V20o will be available from LG?

Related

[KERNEL] 4 Apr r4: MoDaCo Custom Kernel for the LG 2X - Stock Edition (2.6.32.9)

This topic is for my MoDaCo Custom Kernel for the LG Optimus 2x - Stock Edition
Features include...
Based on the LG source
[*]Kernel version 2.6.32.9
Includes EXT4 support (with optional EXT4 conversion on install)
Includes CIFS and TUN modules
Two downloads area available, one for users who wish to stay on EXT3 and one for users who would like their device converted to EXT4 on install (without data loss).
r4 DOWNLOAD - EXT4 version (ROMraid Load Balancing) - MD5: 55470db6a9cb5a88716210de5afbfbb1
r4 DOWNLOAD - EXT3 version (ROMraid Load Balancing) - MD5: ae9d85a37bb6fe439f12066d20345df8
Installation should be carried out via ClockworkMod, please do a backup first! This kernel should be compatible with all stock and custom ROMs.
Enjoy!
P
PS I will be posting the full sources on my GitHub in due course.
keep up the great work paul
Does this change alot?
Redshark976 said:
Does this change alot?
Click to expand...
Click to collapse
Fastest kernel I used!
3400 quadrant, without overclock! Very snappy
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
kelvin_tan said:
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
Click to expand...
Click to collapse
In Pimp my CPU, use the stress test to see if its stable. Use the settings without saving it so you dont boot with those settings. But just to make sure, make a backup of the rom if absolute everything f*cks up.
Sent from my LG-P990 using Tapatalk
Currently I cant even run a CPU Stress Test. When I do, the application will be forced closed.
Do take note that I havent flashed in this new kernel yet.. Using 2.6.32.8 atm
I flashed this Kernel with Stock ROM, but I found that my existing Pimp my CPU not work anymore. Please suggest use with version is fine, Thanks.
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
What advantages are their of converting to ext4? Looking for a good kernel current running modaco fr17 will this be ok?
Sent from my LG-P990 using XDA Premium App
Please delete...
salisbury_steak said:
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
Click to expand...
Click to collapse
it's not a OC kernel so its normal that PimpMyCpu not work...
ilos said:
it's not a OC kernel so its normal that PimpMyCpu not work...
Click to expand...
Click to collapse
I'm actually not looking for an OC, I was looking for a UV.
Sorry if it is a noobish question but wat advantage does this bring over stock kernel?
Sent from my LG-P990 using Tapatalk
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
salisbury_steak said:
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
Click to expand...
Click to collapse
doesn't seem to be compatible with v10d (Philippines)...
Thanks for the confirmation pare! :-D
salisbury_steak said:
Thanks for the confirmation pare! :-D
Click to expand...
Click to collapse
no problem. i hope we get an updated version of this kernel...
is this working for MoDaCo FR19 Fear Edition 12.2 ROM? because i get stuck at the lg logo.. or maybe can someone list down the exact steps to flash this kernel..

A newbie help plz.

guys,
i successfully rooted my device using super one click.
i want to install cwm recovery.
i tried recovery from http://forum.xda-developers.com/showthread.php?t=1098745 this thread. but command prompt just appearing and closing.
font know whats happening.
and how to launch recovery ?
i tried to hold down volume - button and turned on device, after that my phone got restored, asked again for language etc.
plz help urgent guys.
.
and yes, so big developer support and not a single tutorial for newbie, why ?
Alright then, here is your guide...
http://forum.xda-developers.com/showthread.php?t=1327599
Sent from my LG-Stone from the Prehistory...
Nahh... Just kidding!
CM 7.2 Koboltzz KANG
IronKernel 32MB
ok.
installed cwm also.
now next.
want to flash GB over froyo.
downoaded v20e and all nessesary tools.
just tell me that, in the zip, there are 2 files, 1 is bin and 2nd is fls.
how to flash with these files ?
the tutotial given is only for 1 file and for baseband.
plz help.
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
I can't understand what you want. You wanted help to burn CWM and now that you finally got it done, you want to flash with smartflash... that will probably unroot and remove CWM by the way...
Why don't you use CWM to flash 20o? You can have stock 20o that way, much more simple than smartflash, can be done without a computer etc....
Smartflash is mainly used to change baseband, or for people that want to unroot/remove CWM to have a stock phone.
RohanAJoshi said:
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
Click to expand...
Click to collapse
Rohan,
Thanks to Striatum_bdr, it is even more clear now. But if you are just talking about the baseband then....read below
As far as I know....there is no BB for V20o yet....this is just a leaked version....I am using Thanatos5.1 Custom ROM with V20M Baseband and 'o' RIL. You can get the RIL by LG RIL Version by Trymhansen or GetRIL(free app from Market)
Hope you can benefit out of this information.
Just a word more: For the V20M Baseband, you need to start from the biggest file to the smallest in that order. The thread for BB v20M is out there...launch a search mate
Hit the 'THANKS' button on the right if it helped you
ok, thanx for reply guys.
I managed to do flashing and updating things.
.
1st i was on 2.2.
tested root, its rooted.
tested cwm, its done, did backup of original rom.
.
then downloaded v20e which is for india, downloaded and flashed via smartflash.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
.
also speaker sound is lower that stock.
is there any fix ?
.
i already asked, but just want to sure : left side speaker is giving less or no volume output (compared to right), one user said there is one speaker n two holes.
then why the volume is not balanced ?
is the problem in my phone or its normal ?
RohanAJoshi said:
ok, thanx for reply guys.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
Click to expand...
Click to collapse
Rohan,
Normally the CM kang comes with 208 BB. U need to check for the related RIL. My suggestion is to check for the Kang CM ROMs of Temasek or Rusty....Rusty's Kangs are very nice. Have used it for sometime before switching to Thanatos v5.1. This ROM is pretty fast and good battery perf with HP 11-R and PP 10lite....if you want any further info....I can help.
For Temasek check this: http://forum.xda-developers.com/showthread.php?t=1421425
For Rusty check this:http://fitsnugly.euroskank.com/gigglebread/p990/
Hit the "THANKS" button on your right if I helped you
---------- Post added at 10:23 PM ---------- Previous post was at 10:10 PM ----------
Rohan,
If you want to test speed with fluidity....(ofcourse all depends on what you are comfortable and ur taste) try to check with Thanatos 5.1....but, if u want to stay with V20E, I would suggest you to try Topogigi's ROM....I used it for 6 months and absolutely solid in performance....Battery and Device perf. I am just trying to try different ROMs but I would like to go back to Topo if he comes out with another MAGIC of his.
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
RohanAJoshi said:
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
Click to expand...
Click to collapse
1)I flashed through the Smartflash method....thought it was more reliable.
2)For the V20M-you can flash the V20o, V20L and V20M ROMs. I told the some of the good ones already
3)I read somewhere that there is only one speaker. But, I have to check it and I will tell you tomorrow. One thing which made me turn back from CM was the missing radio....but its speed and fluidity is great too...with some additional features....
Hit the "THANKS" button on the right if it helps you
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
For the record: no Baseband can be flashed with cwm please give correct information. Cm7 comes with 218 ril...
I know perfectly that there is no Baseband for 20o see my sig....
Cm7 can't use GB stock ril. You can use GB stock Baseband but you must use a Froyo ril.
RohanAJoshi said:
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
NO !
I think previous posts have messed your mind.
If you flash a 20o it will replace your 20e or anything was installed, even Froyo! All system partitions are overwritten during process.
Read again my first post. All links are zip files to be flashed with cwm.
Smartflash must be use for Baseband, and is the only way to do this. You can use it to flash entire stock ROM to unroot and remove recovery clockwork mod. That can't be used to flash modded ROM.
Go slowly and all will be clear.
RohanAJoshi said:
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
This
Spica1234's HP Kernel and perfomance pack.
wow, too much helping hands.
realy thanx guys.
Mods : dont lock this thread plz, i will keep posting my doubts here, so every new user will be find this thread helpful..
Divyan said:
This
Spica1234's HP Kernel and perfomance pack.
Click to expand...
Click to collapse
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
RohanAJoshi said:
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
Click to expand...
Click to collapse
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
SREEPRAJAY said:
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
Click to expand...
Click to collapse
yeh bro..
I did that..
Now i m on v20o, going to flash spica kernel and PP.
.
Plz will u sure me about my phones speaker ?
That is no or very less volume from left side speaker ?
I want to sure cause if there is hardware problem, i will claim for replace on flipkart.
Plz.
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Striatum_bdr said:
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Click to expand...
Click to collapse
that problem happening from 1st start with stock rom.
And even now, i m on v20o stock.
Only sound from right speaker, no or very less from left, compared to right speaker sound.
1 used said me o2x have 1 speaker n 2 holes.
Is this true ?
Even truem then u also getting same like me ?
No/very less sound from left speaker ?

Official CM 7.2(Final/Stable) Released.

Hello guys..
Dont know anyone shared or not but..
Latest CM 7.2 stable built is released for our o2x.
just check it out..
Official Download
RohanAJoshi said:
Hello guys..
Dont know anyone shared or not but..
Latest CM 7.2 stable built is released for our o2x.
just check it out..
Official Download
Click to expand...
Click to collapse
It was mentioned in some of the Kang threads last week. Nevertheless, thanks for informing us.
upgraded today, so far so good.
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
cedo_n said:
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
Click to expand...
Click to collapse
As you're new - please read the FAQ in the baseband thread: P990 Complete Baseband Overview Thread
tonyp said:
As you're new - please read the FAQ in the baseband thread: P990 Complete Baseband Overview Thread
Click to expand...
Click to collapse
thanx for nice intentions, but I've read that post months ago, and obviously didn't find the solution for this cm 7.2 ROM that refuses to work with RIL from 20q... because on stock 20q with BB and RIL from that same stock ROM no massive drains.
EDIT: OK I'll try froyo baseband and ril and hope for even better stability/performance than stock GB bb/ril combination..
cedo_n said:
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
Click to expand...
Click to collapse
I m using 521 bb and 218 cm7 default ril.
Or try 725 10d ril.
Works best for me.
cedo_n said:
thanx for nice intentions, but I've read that post months ago, and obviously didn't find the solution for this cm 7.2 ROM that refuses to work with RIL from 20q... because on stock 20q with BB and RIL from that same stock ROM no massive drains.
EDIT: OK I'll try froyo baseband and ril and hope for even better stability/performance than stock GB bb/ril combination..
Click to expand...
Click to collapse
"Months ago"? I doubt that as I created the thread 5 weeks ago
But I see you already found the answer, yes you need a Froyo RIL for the v20 GB Basebands for CM ROMs.

Kernel and addons for stock v20s

Hey,
im looking for speedup for my stock v20s version phone.. i know there is many kernels and addons for v20 but which one are for v20s and what works best? im looking for OC kernel, stable as possible and maybe some addons to speedup phone(and maybe other cool addons).. my ram is always finish and i think thats why my phone is so f*king slow (my old htc desire works so much faster than O2X..)
i have installed this addon back already
im sorry for my bad english and if there is already threads about that..
jupsu3 said:
Hey,
im looking for speedup for my stock v20s version phone.. i know there is many kernels and addons for v20 but which one are for v20s and what works best? im looking for OC kernel, stable as possible and maybe some addons to speedup phone(and maybe other cool addons).. my ram is always finish and i think thats why my phone is so f*king slow (my old htc desire works so much faster than O2X..)
i have installed this addon back already
im sorry for my bad english and if there is already threads about that..
Click to expand...
Click to collapse
Try SPiCA or flix kernels...and if you are thinking of a custom ROM with stock base.think about django manouche 1.5rc2 with aroma installer and the ram never gets low by using multi tasking selection.kernels are part of the installer.try it mate
O2X with Magical ROM and supersonic kernels from my buddies
SREEPRAJAY said:
Try SPiCA or flix kernels...and if you are thinking of a custom ROM with stock base.think about django manouche 1.5rc2 with aroma installer and the ram never gets low by using multi tasking selection.kernels are part of the installer.try it mate
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
can you help me to choose right kernel, there is so many..=/
and same for powerpacks if you think i should instal it too..
i cant post links to other sites.. This is spica kernel thread?
Install latest Django Rom it has kernel aswell performance packs, no confusion.
Choose HP kernel during installation
Sent from my LG-P990 using Tapatalk 2
spica1234 said:
Install latest Django Rom it has kernel aswell performance packs, no confusion.
Choose HP kernel during installation
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
i will try that, tanks, do i need full wipe when i come from stock rom? or only dalvik+cache?

[Q] Zeus 7.04 or 6.4?

Hi, guys just wanted some feedback, wich version of zeus is better 7.04 or 6.4?
Thanks
kopaka said:
Hi, guys just wanted some feedback, wich version of zeus is better 7.04 or 6.4?
Thanks
Click to expand...
Click to collapse
Zeus v7 with 7.4 update and 7.4 fix and Diana 2.6 kernel is the best
Hi, I have got a stupid question Which is the best way to upgrade from 7.03 to 7.04? Will be enough to put into SD and install upgrade and then fix from recovery? Of course including wipe cache.... ... Thanks in advance
xmilanz said:
Hi, I have got a stupid question Which is the best way to upgrade from 7.03 to 7.04? Will be enough to put into SD and install upgrade and then fix from recovery? Of course including wipe cache.... ... Thanks in advance
Click to expand...
Click to collapse
just 7.04 update zip in sd card, wipe cache and dalvik cache and install the 7.04 zip (don't forget to also install 7.04 fix zip)
And if you use Diana kernel 2.6, you get better performance.
thanks a lot, I will try.
(modified: update finished, very easy with amazing effect )
Thanks guys, and btw 7.04 has the best battery performance?
If you want it as stable as it goes and very easy to install go for Zeus 6.4. If you want something with a newer look that is (nearly) as stable go for Zeus 7.04f. 7.04 seems to have even a little better battery saving.
For instructions how to install it see http://forum.xda-developers.com/showpost.php?p=21587960&postcount=1 , best instruction there is.
Zeus 6.4 is with Diana kernel v2.3 and 7.04 with v2.6. I think Huexxx sugested to use the new Diana 2.6 even with 6.4. But I think you can use every of those kernels with every of the ROMs.

Categories

Resources