guys,
i successfully rooted my device using super one click.
i want to install cwm recovery.
i tried recovery from http://forum.xda-developers.com/showthread.php?t=1098745 this thread. but command prompt just appearing and closing.
font know whats happening.
and how to launch recovery ?
i tried to hold down volume - button and turned on device, after that my phone got restored, asked again for language etc.
plz help urgent guys.
.
and yes, so big developer support and not a single tutorial for newbie, why ?
Alright then, here is your guide...
http://forum.xda-developers.com/showthread.php?t=1327599
Sent from my LG-Stone from the Prehistory...
Nahh... Just kidding!
CM 7.2 Koboltzz KANG
IronKernel 32MB
ok.
installed cwm also.
now next.
want to flash GB over froyo.
downoaded v20e and all nessesary tools.
just tell me that, in the zip, there are 2 files, 1 is bin and 2nd is fls.
how to flash with these files ?
the tutotial given is only for 1 file and for baseband.
plz help.
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
I can't understand what you want. You wanted help to burn CWM and now that you finally got it done, you want to flash with smartflash... that will probably unroot and remove CWM by the way...
Why don't you use CWM to flash 20o? You can have stock 20o that way, much more simple than smartflash, can be done without a computer etc....
Smartflash is mainly used to change baseband, or for people that want to unroot/remove CWM to have a stock phone.
RohanAJoshi said:
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
Click to expand...
Click to collapse
Rohan,
Thanks to Striatum_bdr, it is even more clear now. But if you are just talking about the baseband then....read below
As far as I know....there is no BB for V20o yet....this is just a leaked version....I am using Thanatos5.1 Custom ROM with V20M Baseband and 'o' RIL. You can get the RIL by LG RIL Version by Trymhansen or GetRIL(free app from Market)
Hope you can benefit out of this information.
Just a word more: For the V20M Baseband, you need to start from the biggest file to the smallest in that order. The thread for BB v20M is out there...launch a search mate
Hit the 'THANKS' button on the right if it helped you
ok, thanx for reply guys.
I managed to do flashing and updating things.
.
1st i was on 2.2.
tested root, its rooted.
tested cwm, its done, did backup of original rom.
.
then downloaded v20e which is for india, downloaded and flashed via smartflash.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
.
also speaker sound is lower that stock.
is there any fix ?
.
i already asked, but just want to sure : left side speaker is giving less or no volume output (compared to right), one user said there is one speaker n two holes.
then why the volume is not balanced ?
is the problem in my phone or its normal ?
RohanAJoshi said:
ok, thanx for reply guys.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
Click to expand...
Click to collapse
Rohan,
Normally the CM kang comes with 208 BB. U need to check for the related RIL. My suggestion is to check for the Kang CM ROMs of Temasek or Rusty....Rusty's Kangs are very nice. Have used it for sometime before switching to Thanatos v5.1. This ROM is pretty fast and good battery perf with HP 11-R and PP 10lite....if you want any further info....I can help.
For Temasek check this: http://forum.xda-developers.com/showthread.php?t=1421425
For Rusty check this:http://fitsnugly.euroskank.com/gigglebread/p990/
Hit the "THANKS" button on your right if I helped you
---------- Post added at 10:23 PM ---------- Previous post was at 10:10 PM ----------
Rohan,
If you want to test speed with fluidity....(ofcourse all depends on what you are comfortable and ur taste) try to check with Thanatos 5.1....but, if u want to stay with V20E, I would suggest you to try Topogigi's ROM....I used it for 6 months and absolutely solid in performance....Battery and Device perf. I am just trying to try different ROMs but I would like to go back to Topo if he comes out with another MAGIC of his.
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
RohanAJoshi said:
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
Click to expand...
Click to collapse
1)I flashed through the Smartflash method....thought it was more reliable.
2)For the V20M-you can flash the V20o, V20L and V20M ROMs. I told the some of the good ones already
3)I read somewhere that there is only one speaker. But, I have to check it and I will tell you tomorrow. One thing which made me turn back from CM was the missing radio....but its speed and fluidity is great too...with some additional features....
Hit the "THANKS" button on the right if it helps you
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
For the record: no Baseband can be flashed with cwm please give correct information. Cm7 comes with 218 ril...
I know perfectly that there is no Baseband for 20o see my sig....
Cm7 can't use GB stock ril. You can use GB stock Baseband but you must use a Froyo ril.
RohanAJoshi said:
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
NO !
I think previous posts have messed your mind.
If you flash a 20o it will replace your 20e or anything was installed, even Froyo! All system partitions are overwritten during process.
Read again my first post. All links are zip files to be flashed with cwm.
Smartflash must be use for Baseband, and is the only way to do this. You can use it to flash entire stock ROM to unroot and remove recovery clockwork mod. That can't be used to flash modded ROM.
Go slowly and all will be clear.
RohanAJoshi said:
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
This
Spica1234's HP Kernel and perfomance pack.
wow, too much helping hands.
realy thanx guys.
Mods : dont lock this thread plz, i will keep posting my doubts here, so every new user will be find this thread helpful..
Divyan said:
This
Spica1234's HP Kernel and perfomance pack.
Click to expand...
Click to collapse
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
RohanAJoshi said:
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
Click to expand...
Click to collapse
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
SREEPRAJAY said:
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
Click to expand...
Click to collapse
yeh bro..
I did that..
Now i m on v20o, going to flash spica kernel and PP.
.
Plz will u sure me about my phones speaker ?
That is no or very less volume from left side speaker ?
I want to sure cause if there is hardware problem, i will claim for replace on flipkart.
Plz.
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Striatum_bdr said:
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Click to expand...
Click to collapse
that problem happening from 1st start with stock rom.
And even now, i m on v20o stock.
Only sound from right speaker, no or very less from left, compared to right speaker sound.
1 used said me o2x have 1 speaker n 2 holes.
Is this true ?
Even truem then u also getting same like me ?
No/very less sound from left speaker ?
Related
My dear friends i dont have any knowledge about kernel ... today i installed swiftkernel with cyanogen mod 7 ... if i overclock the phone to 1.2 ghz wont it damage the phone please do reply me .....
gomzy27 said:
My dear friends i dont have any knowledge about kernel ... today i installed swiftkernel with cyanogen mod 7 ... if i overclock the phone to 1.2 ghz wont it damage the phone please do reply me .....
Click to expand...
Click to collapse
Hi, the overclocking in general reduces life span of the cpu.
http://www.pcguide.com/opt/oc/risksRisksCPU-c.html
from my personal experience on this phone its quite safe to o.c to 1.4Ghz.
just mind the temperatures.
i installed swiftkernel .. it can be overclocked to 1.2 ghz .. will this be safe and can you kindly suggest me with the best rom and kernel .... may be the one that you are using .. once again thank you very much for replying to my query!!!!
Personally I love cyanogen mod, I'm using nightly build 200 and its awesome. Naturally you should get the newest one.
Vorkkernal is best for cyanogen and miui roms.
You will not break your phone overclocking. on very very hot days maybe go 1ghz to be safe.
Sent from my Optimus 2X using Tapatalk
Hi again
i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/showthread.php?t=1328656
the reason for de-odexed system is simply because it lets you use the kitchen for further customizations, also the version by paul is pre-rooted. which will make you're life easy.
the reason is simple. everything works fine atm in the stock rom (yeh people always complain..... so dont flame me for sticking to the stock, but for me it works excellent)
cyno is great as well, also topo and the rest , the ppl here are doing a magnificent work but you need to remember that all of this is work in progress; therefore i suggest you will use the stock rom for the start.
i.e. 1 week or so
and see if it fits well with you're requirements. if you don't have any issues than that's ure solution if u got issues with stock drop a msg here with the problem description and we can see what can we do.
hope i helped.
is it the same way as we flash other rom???? i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/show....php?t=132865
gomzy27 said:
is it the same way as we flash other rom???? i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/show....php?t=132865
Click to expand...
Click to collapse
ure link is broken this is the right one.
http://forum.xda-developers.com/showthread.php?t=1328656
and yes u can use CWM to flash it.
no problem.
Thank a lot bro!!!! Hope to get more information from you!!
gomzy27 said:
Thank a lot bro!!!! Hope to get more information from you!!
Click to expand...
Click to collapse
with pleasure, that's why we are all here
after flashing it its looping i can only see the lg logo again and again??
did you wipe the cache and data?
did u download this file?
http://www.filesonic.com/file/2862194275/v20l-stock-rooted-deodex.zip
did u do a full wipe?
please explain what you have done and whats going on
the procedure is simple.
download the file to the SD
boot to CWM, wipe data / cache and dalvik cache , and then apply the zip.
the package is ext3 i assume you come from stock therefor there should be no issue.
let me know.
Yes i did it !!
should i do this If so, just flash with CWM back to ext3 and wipe cache with CWM.??
gomzy27 said:
should i do this If so, just flash with CWM back to ext3 and wipe cache with CWM.??
Click to expand...
Click to collapse
correctisimo
i had cyanogen mod 7 installed ....
gomzy27 said:
i had cyanogen mod 7 installed ....
Click to expand...
Click to collapse
u must wipe data 1st before flash!!! the rom is totally different.
i have smart flash tool but i have v10c not v 10e baseband 750 ...
gomzy27 said:
i have smart flash tool but i have v10c not v 10e baseband 750 ...
Click to expand...
Click to collapse
it dosent matter,
if u boot to CWM
and delete (wipe, and cache )as i mentioned before and flash it will be o.k
Finished installing what should i do next??
gomzy27 said:
Finished installing what should i do next??
Click to expand...
Click to collapse
Enjoy the phone? What is the problem or situation ?
Sent from my LG-P990 using XDA App
hello,
wish all here a happy xmas. sorry for my bad english but i hope that i can explain my problem.
I cant find the right firmware in your list.
what i need is a brandingfree firmware. sorry but iam a noob
firmware is 2.3.5
Baseband I9001XXKPF (this what i cant find)
wed-sep-28/KST2011
csc- 9001/XEGKP2
you need more ?
and question is : which custom firmware are pos. ?
hope u can help me
lg marc
You should be able to flash any custom firmware, like Performance Edition RC2 or Cranium Rom. If you want just the stock unbranded firmware, you can flash last one on the list - 2.3.6 XXKPS. I don't know what language are you using on your phone, if it is not English, pay attention to that as well - you'll find all info in relevant threads.
@tomi555,
I flashed the regular 2.3.6 yesterday.with odin very simple and easy. like 10 minutes.
I need a custom firmware a mixed between speed and akku protection.
anybody an idea ??
lg gyver
Well I can recommend you try Performance Edition RC2, it is currenty in beta, you can wait a day or two for the final release. If you are going to install beta, be sure to change CPU governor to smartass v2. Final version will have that enabled by default. It is really fast with good battery life and no bugs (but you can have small issues with installation). You will really see a difference compared to stock rom
Or you can try Cranium rom, but I haven't tested it, seems it currently has a problem if you want to set mp3 as a ringtone. Other than that it seems to be great if you want to overclock your CPU. I don't have such needs so I'm not using it.
thx tomi
ok I have the rc4 now. but how I can update to rc6 or rc5 ?? Is it pos. to run rc6 on my i9001 ??
pls help
thx gyver
You mean Cranium RC6, of course it is possible, you can download the Odin one package from their website.
http://sakindia123.prophecy.li/
For other questions, info and installation tips check out its thread.
http://forum.xda-developers.com/showthread.php?t=1313650
thx soooo much.
I used this thread to flash to rc4.
Installation:
Installation for RC6(comin' up)
*Recovery Package (Now,easy to install!)
1)Install FeaMod Recovery
2)boot into recovery mode
3)Flash Cranium Rom
4)dont wipe cache.............and fix permssions!
thats all for update up to rc6 ???
lg gyver
Yes, I believe that's the method if you downloaded
Cranium Rom RC6 (CWM Version)
You can flash it via Odin MultiDownloader from your computer just like the stock rom if you download
Cranium Rom RC6 (Odin Version by nikagl)
But... like I said I don't have that ROM so perhaps better double-check / ask in that thread
I dont know how I can install Feamod Recovery.
If I have it to flash with odin ?? where is the ariesve file ?
or can I use the same as to flash the rom ?
lg gyver
got it.
damn this is very cool. thx to the hole xda team.
@tom special thx to u
lg gyver
Hi guys, just bought an O2X yesterday and I want to be sure of the steps on how to take my Froyo to CM7 or any other GB for that matter, so here's what I think it should be done:
1.- Root the phone (seems Gingerbreak works on this phone with froyo?)
2.- Install CWM (Can install from ROM manager unless I wanna be able to flash from internal memory in which case I should install the modded vesion?)
3.-Change baseband?? (this is my biggest concern, I'm on 1035.21)
4.- Flash rom + gapps if needed
Please guys if you can confirm my thoughts on all the 4 steps it'd be much appreciated
_BONUS QUESTION_
Is the hdmi and camera working completely or is the stock froyo better on those aspects, as I don't see a thread for official CM7 I'm guessing I should just download from download.cyanogenmod.com/?device=p990 ?
Thanks again.
japmsn said:
Hi guys, just bought an O2X yesterday and I want to be sure of the steps on how to take my Froyo to CM7 or any other GB for that matter, so here's what I think it should be done:
1.- Root the phone (seems Gingerbreak works on this phone with froyo?)
2.- Install CWM (Can install from ROM manager unless I wanna be able to flash from internal memory in which case I should install the modded vesion?)
3.-Change baseband?? (this is my biggest concern, I'm on 1035.21)
4.- Flash rom + gapps if needed
Please guys if you can confirm my thoughts on all the 4 steps it'd be much appreciated
_BONUS QUESTION_
Is the hdmi and camera working completely or is the stock froyo better on those aspects, as I don't see a thread for official CM7 I'm guessing I should just download from download.cyanogenmod.com/?device=p990 ?
Thanks again.
Click to expand...
Click to collapse
You are almost right there m friend.
There is an unofficial CM7 thread out there by Temasek and MisjudgedTwat....it is more than what you can ever see.For CM7 ROMs, choose Kernels by Temasek or by MisjudgedTwat or by Vadonka.
If you are looking at Stock based ROMs, then go for DjangoManouche1.3 beta16. Stock based ROMs + HP or Gueste Kernels.
for the Baseband,you have to come out with the full version number ...what you have mentioned is not complete.Try V20Q for the BB with V10 series RIL...Normally, CM7 comes with a RIL which is enough. Install GetRIL app from the play store and you can change RIL if it is not compatible. For the Stock based ROMs, you can flash the V20Q Base band + v20Q RIL(both are 725 stuff)
SREEPRAJAY said:
You are almost right there m friend.
There is an unofficial CM7 thread out there by Temasek and MisjudgedTwat....it is more than what you can ever see.For CM7 ROMs, choose Kernels by Temasek or by MisjudgedTwat or by Vadonka.
If you are looking at Stock based ROMs, then go for DjangoManouche1.3 beta16. Stock based ROMs + HP or Gueste Kernels.
for the Baseband,you have to come out with the full version number ...what you have mentioned is not complete.Try V20Q for the BB with V10 series RIL...Normally, CM7 comes with a RIL which is enough. Install GetRIL app from the play store and you can change RIL if it is not compatible. For the Stock based ROMs, you can flash the V20Q Base band + v20Q RIL(both are 725 stuff)
Click to expand...
Click to collapse
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
japmsn said:
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
Click to expand...
Click to collapse
wait i am answering u...
---------- Post added at 09:35 AM ---------- Previous post was at 09:28 AM ----------
japmsn said:
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
Click to expand...
Click to collapse
Look at this thread...it has all the BB related things.You can flash the BB which is V20Q which is the latest for O2X (your choice as it is the service provider,region,device and so on)and this is the best as you will see in the thread which has a poll. you can then flash the ROM with the three wipes...dalvik,user data and cache.Dont forget to backup your apps and data with Titanium Backup pro or any other app.
http://forum.xda-developers.com/showthread.php?t=1658047
you can then use the GetRIL app to choose your RIL...which is normally with the ROM.Best way would be flash the BB and then flash the ROM(to save time). Flashing the BB will wipe the complete data. Take a backup through CWM before.even if ou have an issues with wifi,mobile data 3G, dont worry to choose the correct RIL and reboot.
if you have any issues, wipe the three wipes and reflash the ROM.normally, you wont have any issues....just do it...
I am only trying to help...dont blame me for bricking ur phone...follow instructions and we all have a great device...YOU WILL TOO
SREEPRAJAY said:
wait i am answering u...
---------- Post added at 09:35 AM ---------- Previous post was at 09:28 AM ----------
Look at this thread...it has all the BB related things.You can flash the BB which is V20Q which is the latest for O2X...
Click to expand...
Click to collapse
Thanks again man, I've a better idea now. I'll keep using my phone with stock rom for a week to have something to compare to and then go crazy trying roms
I know everything I do with my phone is my full responsibility so no worries there.
Thanks!
Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:
What is Stock ICS 538? or you mean 587
the recovery are same or did u update it too ?
I have to install the img with fastboot ... And I have everything right???
Thanks for this kernel. will give it try one of these days
New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules
lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same
josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM
Why now 4px? Was Gingerbread not 2px?
paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.
dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.
Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?
Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app
I saw that thread with porting su660 basebands to p990....but the links are not working. It says that the file was removed or is invalid. Where can I get one of those basebands? I have CM10 wich baseband I should flash? (and please send me links wich can I flash with CMW) Thank You!
im using v30c bb for cm10 1105...till now no prob...but i really think that no sound,noise bug is cm10 bug so we need to wait until its fixed...
the link is http://forum.xda-developers.com/showthread.php?t=1658047 but u need to flash using smartflash..dont know about flashing through cwm...
ullekh99 said:
im using v30c bb for cm10 1105...till now no prob...but i really think that no sound,noise bug is cm10 bug so we need to wait until its fixed...
the link is http://forum.xda-developers.com/showthread.php?t=1658047 but u need to flash using smartflash..dont know about flashing through cwm...
Click to expand...
Click to collapse
and it will wipe all my data?
P.S. I've flashed many rom kernels mods etc.....I know some things but this is the first time I flash baseband because I didn't had problems with this......I read some things about baseband and ril but I didn't understood too much just that the baseband is a bit responsable about battery life and voice quality or for the voice quality is responsible the ril?