Related
guys,
i successfully rooted my device using super one click.
i want to install cwm recovery.
i tried recovery from http://forum.xda-developers.com/showthread.php?t=1098745 this thread. but command prompt just appearing and closing.
font know whats happening.
and how to launch recovery ?
i tried to hold down volume - button and turned on device, after that my phone got restored, asked again for language etc.
plz help urgent guys.
.
and yes, so big developer support and not a single tutorial for newbie, why ?
Alright then, here is your guide...
http://forum.xda-developers.com/showthread.php?t=1327599
Sent from my LG-Stone from the Prehistory...
Nahh... Just kidding!
CM 7.2 Koboltzz KANG
IronKernel 32MB
ok.
installed cwm also.
now next.
want to flash GB over froyo.
downoaded v20e and all nessesary tools.
just tell me that, in the zip, there are 2 files, 1 is bin and 2nd is fls.
how to flash with these files ?
the tutotial given is only for 1 file and for baseband.
plz help.
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
I can't understand what you want. You wanted help to burn CWM and now that you finally got it done, you want to flash with smartflash... that will probably unroot and remove CWM by the way...
Why don't you use CWM to flash 20o? You can have stock 20o that way, much more simple than smartflash, can be done without a computer etc....
Smartflash is mainly used to change baseband, or for people that want to unroot/remove CWM to have a stock phone.
RohanAJoshi said:
k, now flashing v20e, anyone having download link fro v20o ?
that have bin and fls file ?
i got one, which is zip, need to flash via cwm.
Click to expand...
Click to collapse
Rohan,
Thanks to Striatum_bdr, it is even more clear now. But if you are just talking about the baseband then....read below
As far as I know....there is no BB for V20o yet....this is just a leaked version....I am using Thanatos5.1 Custom ROM with V20M Baseband and 'o' RIL. You can get the RIL by LG RIL Version by Trymhansen or GetRIL(free app from Market)
Hope you can benefit out of this information.
Just a word more: For the V20M Baseband, you need to start from the biggest file to the smallest in that order. The thread for BB v20M is out there...launch a search mate
Hit the 'THANKS' button on the right if it helped you
ok, thanx for reply guys.
I managed to do flashing and updating things.
.
1st i was on 2.2.
tested root, its rooted.
tested cwm, its done, did backup of original rom.
.
then downloaded v20e which is for india, downloaded and flashed via smartflash.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
.
also speaker sound is lower that stock.
is there any fix ?
.
i already asked, but just want to sure : left side speaker is giving less or no volume output (compared to right), one user said there is one speaker n two holes.
then why the volume is not balanced ?
is the problem in my phone or its normal ?
RohanAJoshi said:
ok, thanx for reply guys.
didnt do baseband n ril things though..
.
then tried latest cm kang with irnkernel.
its laggy, dunno why, plz tell.
Click to expand...
Click to collapse
Rohan,
Normally the CM kang comes with 208 BB. U need to check for the related RIL. My suggestion is to check for the Kang CM ROMs of Temasek or Rusty....Rusty's Kangs are very nice. Have used it for sometime before switching to Thanatos v5.1. This ROM is pretty fast and good battery perf with HP 11-R and PP 10lite....if you want any further info....I can help.
For Temasek check this: http://forum.xda-developers.com/showthread.php?t=1421425
For Rusty check this:http://fitsnugly.euroskank.com/gigglebread/p990/
Hit the "THANKS" button on your right if I helped you
---------- Post added at 10:23 PM ---------- Previous post was at 10:10 PM ----------
Rohan,
If you want to test speed with fluidity....(ofcourse all depends on what you are comfortable and ur taste) try to check with Thanatos 5.1....but, if u want to stay with V20E, I would suggest you to try Topogigi's ROM....I used it for 6 months and absolutely solid in performance....Battery and Device perf. I am just trying to try different ROMs but I would like to go back to Topo if he comes out with another MAGIC of his.
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
RohanAJoshi said:
ok.
thanx for help dude.
will try soon.
.
now tell me, suppose, i m on v20e, then flashed modified v20o via cmw, then it will be ok ?
means no need to do smartflash thing ?
.
and plz tell me that, i need to try custom roms which are available for my built only ?
means only v20m supported rom will be used on v20m ?
.
also solve doubt about less speaker volume in cm, and no left speaker at all.
plz.
Click to expand...
Click to collapse
1)I flashed through the Smartflash method....thought it was more reliable.
2)For the V20M-you can flash the V20o, V20L and V20M ROMs. I told the some of the good ones already
3)I read somewhere that there is only one speaker. But, I have to check it and I will tell you tomorrow. One thing which made me turn back from CM was the missing radio....but its speed and fluidity is great too...with some additional features....
Hit the "THANKS" button on the right if it helps you
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
For the record: no Baseband can be flashed with cwm please give correct information. Cm7 comes with 218 ril...
I know perfectly that there is no Baseband for 20o see my sig....
Cm7 can't use GB stock ril. You can use GB stock Baseband but you must use a Froyo ril.
RohanAJoshi said:
So, any links for v20o that will be flashed via smartflash ?
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
NO !
I think previous posts have messed your mind.
If you flash a 20o it will replace your 20e or anything was installed, even Froyo! All system partitions are overwritten during process.
Read again my first post. All links are zip files to be flashed with cwm.
Smartflash must be use for Baseband, and is the only way to do this. You can use it to flash entire stock ROM to unroot and remove recovery clockwork mod. That can't be used to flash modded ROM.
Go slowly and all will be clear.
RohanAJoshi said:
what do u mean by : perf with HP 11-R and PP 10lite ?
Click to expand...
Click to collapse
This
Spica1234's HP Kernel and perfomance pack.
wow, too much helping hands.
realy thanx guys.
Mods : dont lock this thread plz, i will keep posting my doubts here, so every new user will be find this thread helpful..
Divyan said:
This
Spica1234's HP Kernel and perfomance pack.
Click to expand...
Click to collapse
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
RohanAJoshi said:
Bro, this link sending me to cm7 nightly builts, which give tutorial for cm7 installations.
Click to expand...
Click to collapse
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
SREEPRAJAY said:
Rohan,
Please check in the Dev section for the Spica's HP Kernel and also Powerpack....it is there..,...use Search or PM if you want more details
Click to expand...
Click to collapse
yeh bro..
I did that..
Now i m on v20o, going to flash spica kernel and PP.
.
Plz will u sure me about my phones speaker ?
That is no or very less volume from left side speaker ?
I want to sure cause if there is hardware problem, i will claim for replace on flipkart.
Plz.
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Striatum_bdr said:
It seems up be kernel related the speaker problem, if you read Vadonka's thread about his new to come cm7 kernel he speaks about a fix for that issue.
Click to expand...
Click to collapse
that problem happening from 1st start with stock rom.
And even now, i m on v20o stock.
Only sound from right speaker, no or very less from left, compared to right speaker sound.
1 used said me o2x have 1 speaker n 2 holes.
Is this true ?
Even truem then u also getting same like me ?
No/very less sound from left speaker ?
Hi,
First of all I have to say I'm really a noob in flashing etc, but I'm trying to learn
I am interested in flashing the horsepower kernel.
I read in the Hp thread that it is only compatible with V20 l/j/g/i/c/e.
I check on my phone and I have V20m...
Is that going to be an issue ? I'm not interested in flashing a custom rom, I just want the extra performance So I'd rather keep the stock rom
And I also have a few questions about the kernel itself. Are there any downsides (apps that won't work, ...)? If ICS is released for the P990, can I just update or do I have to flash the original stock kernel back ? I also read of people that had troubles with baseband, is that something that is kernelrelated of romrelated ?
thx
Just flash the kernel and see what happens
If it doesnt work, restore your backup you made in recovery before you flashed
I've seen people complain that they can't play games like PES2012 with certain kernels.
I think when ICS comes out you can update regardless of what kernel you are using. From my understanding when you flash a rom you overwrite kernel and BB, so if you want a different kernel and BB you have to change that after you flash a rom, but you'll have to confirm this, I'm not sure this is accurate.
LarsPT said:
I've seen people complain that they can't play games like PES2012 with certain kernels.
I think when ICS comes out you can update regardless of what kernel you are using. From my understanding when you flash a rom you overwrite kernel and BB, so if you want a different kernel and BB you have to change that after you flash a rom, but you'll have to confirm this, I'm not sure this is accurate.
Click to expand...
Click to collapse
The ROMs which have Kernel built in....but then you can also use custom kernels which are used to optimize the performance of the device...and ROM flashing does not overwrite any BB....but yes...you have to flash through Smartflash method for changing a BB. Changing a BB will wipe the data for sure....but then after the flashing ROM you also need to change the RIL accordingly....
If you have the wrong baseband, can't you just flash the baseband that worked on the stock rom ?
Bochdalek said:
If you have the wrong baseband, can't you just flash the baseband that worked on the stock rom ?
Click to expand...
Click to collapse
According to Sreeprajay flashing a kernel will not change your BB, so you will keep stock BB.
LarsPT said:
According to Sreeprajay flashing a kernel will not change your BB, so you will keep stock BB.
Click to expand...
Click to collapse
you are right....else i would just flash a kernel for the ROM and jump to different BB for different ROMs....unfortunately it does not..... ;(
testing ROMs will become an exciting game...just a few mins
Hp Kernel
[SuperSonic]*[April-05]*[CM9-ICS KERNEL][RC1-R] Horse Power 2x ICS RC1-R [OTF
I've installed that kernel and I run Nova HD Rebuild 1.0.3, the problem is after I reboot it shows my baseband is unknown. What went wrong? Someone help?
Arthur93x said:
[SuperSonic]*[April-05]*[CM9-ICS KERNEL][RC1-R] Horse Power 2x ICS RC1-R [OTF
I've installed that kernel and I run Nova HD Rebuild 1.0.3, the problem is after I reboot it shows my baseband is unknown. What went wrong? Someone help?
Click to expand...
Click to collapse
You have been replied in PM. Check your PM
Sent from my LG-P990 using Tapatalk
Hi guys, just bought an O2X yesterday and I want to be sure of the steps on how to take my Froyo to CM7 or any other GB for that matter, so here's what I think it should be done:
1.- Root the phone (seems Gingerbreak works on this phone with froyo?)
2.- Install CWM (Can install from ROM manager unless I wanna be able to flash from internal memory in which case I should install the modded vesion?)
3.-Change baseband?? (this is my biggest concern, I'm on 1035.21)
4.- Flash rom + gapps if needed
Please guys if you can confirm my thoughts on all the 4 steps it'd be much appreciated
_BONUS QUESTION_
Is the hdmi and camera working completely or is the stock froyo better on those aspects, as I don't see a thread for official CM7 I'm guessing I should just download from download.cyanogenmod.com/?device=p990 ?
Thanks again.
japmsn said:
Hi guys, just bought an O2X yesterday and I want to be sure of the steps on how to take my Froyo to CM7 or any other GB for that matter, so here's what I think it should be done:
1.- Root the phone (seems Gingerbreak works on this phone with froyo?)
2.- Install CWM (Can install from ROM manager unless I wanna be able to flash from internal memory in which case I should install the modded vesion?)
3.-Change baseband?? (this is my biggest concern, I'm on 1035.21)
4.- Flash rom + gapps if needed
Please guys if you can confirm my thoughts on all the 4 steps it'd be much appreciated
_BONUS QUESTION_
Is the hdmi and camera working completely or is the stock froyo better on those aspects, as I don't see a thread for official CM7 I'm guessing I should just download from download.cyanogenmod.com/?device=p990 ?
Thanks again.
Click to expand...
Click to collapse
You are almost right there m friend.
There is an unofficial CM7 thread out there by Temasek and MisjudgedTwat....it is more than what you can ever see.For CM7 ROMs, choose Kernels by Temasek or by MisjudgedTwat or by Vadonka.
If you are looking at Stock based ROMs, then go for DjangoManouche1.3 beta16. Stock based ROMs + HP or Gueste Kernels.
for the Baseband,you have to come out with the full version number ...what you have mentioned is not complete.Try V20Q for the BB with V10 series RIL...Normally, CM7 comes with a RIL which is enough. Install GetRIL app from the play store and you can change RIL if it is not compatible. For the Stock based ROMs, you can flash the V20Q Base band + v20Q RIL(both are 725 stuff)
SREEPRAJAY said:
You are almost right there m friend.
There is an unofficial CM7 thread out there by Temasek and MisjudgedTwat....it is more than what you can ever see.For CM7 ROMs, choose Kernels by Temasek or by MisjudgedTwat or by Vadonka.
If you are looking at Stock based ROMs, then go for DjangoManouche1.3 beta16. Stock based ROMs + HP or Gueste Kernels.
for the Baseband,you have to come out with the full version number ...what you have mentioned is not complete.Try V20Q for the BB with V10 series RIL...Normally, CM7 comes with a RIL which is enough. Install GetRIL app from the play store and you can change RIL if it is not compatible. For the Stock based ROMs, you can flash the V20Q Base band + v20Q RIL(both are 725 stuff)
Click to expand...
Click to collapse
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
japmsn said:
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
Click to expand...
Click to collapse
wait i am answering u...
---------- Post added at 09:35 AM ---------- Previous post was at 09:28 AM ----------
japmsn said:
Thanks a lot for taking the time to answer. Now the baseband thing got me a little confused, if I go for official CM7 which will come with a RIL I'd have to install a matching baseband. Can I do that afterwards or do I have to change the baseband first?. I remember with my O1 I flashed a rom and got no service because I was on wrong bb, and flashing the bb fixed it. I just wanna be sure it's fixeable if I mess up
btw.
BB version: 1035.21_20110602
LGE Version: LGP990h-V10a
Click to expand...
Click to collapse
Look at this thread...it has all the BB related things.You can flash the BB which is V20Q which is the latest for O2X (your choice as it is the service provider,region,device and so on)and this is the best as you will see in the thread which has a poll. you can then flash the ROM with the three wipes...dalvik,user data and cache.Dont forget to backup your apps and data with Titanium Backup pro or any other app.
http://forum.xda-developers.com/showthread.php?t=1658047
you can then use the GetRIL app to choose your RIL...which is normally with the ROM.Best way would be flash the BB and then flash the ROM(to save time). Flashing the BB will wipe the complete data. Take a backup through CWM before.even if ou have an issues with wifi,mobile data 3G, dont worry to choose the correct RIL and reboot.
if you have any issues, wipe the three wipes and reflash the ROM.normally, you wont have any issues....just do it...
I am only trying to help...dont blame me for bricking ur phone...follow instructions and we all have a great device...YOU WILL TOO
SREEPRAJAY said:
wait i am answering u...
---------- Post added at 09:35 AM ---------- Previous post was at 09:28 AM ----------
Look at this thread...it has all the BB related things.You can flash the BB which is V20Q which is the latest for O2X...
Click to expand...
Click to collapse
Thanks again man, I've a better idea now. I'll keep using my phone with stock rom for a week to have something to compare to and then go crazy trying roms
I know everything I do with my phone is my full responsibility so no worries there.
Thanks!
Hello guys..
Dont know anyone shared or not but..
Latest CM 7.2 stable built is released for our o2x.
just check it out..
Official Download
RohanAJoshi said:
Hello guys..
Dont know anyone shared or not but..
Latest CM 7.2 stable built is released for our o2x.
just check it out..
Official Download
Click to expand...
Click to collapse
It was mentioned in some of the Kang threads last week. Nevertheless, thanks for informing us.
upgraded today, so far so good.
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
cedo_n said:
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
Click to expand...
Click to collapse
As you're new - please read the FAQ in the baseband thread: P990 Complete Baseband Overview Thread
tonyp said:
As you're new - please read the FAQ in the baseband thread: P990 Complete Baseband Overview Thread
Click to expand...
Click to collapse
thanx for nice intentions, but I've read that post months ago, and obviously didn't find the solution for this cm 7.2 ROM that refuses to work with RIL from 20q... because on stock 20q with BB and RIL from that same stock ROM no massive drains.
EDIT: OK I'll try froyo baseband and ril and hope for even better stability/performance than stock GB bb/ril combination..
cedo_n said:
Hi,
I've got massive battery drain when mobile data is enabled with RIL (0218 - 10b) that comes with 7.2
Baseband is from v20q stock rom, and ril from 20q is not working.
Any recomended BB/RIL combination with this near (voodoo sound patch in kernel please) perfect ROM?
thanx,
cedo_n
Click to expand...
Click to collapse
I m using 521 bb and 218 cm7 default ril.
Or try 725 10d ril.
Works best for me.
cedo_n said:
thanx for nice intentions, but I've read that post months ago, and obviously didn't find the solution for this cm 7.2 ROM that refuses to work with RIL from 20q... because on stock 20q with BB and RIL from that same stock ROM no massive drains.
EDIT: OK I'll try froyo baseband and ril and hope for even better stability/performance than stock GB bb/ril combination..
Click to expand...
Click to collapse
"Months ago"? I doubt that as I created the thread 5 weeks ago
But I see you already found the answer, yes you need a Froyo RIL for the v20 GB Basebands for CM ROMs.
Hi m8s,
I just installed CM10.1 official nightly, and I'm experiencing some data drops, so I wanna know what is the recommended baseband for use whit CM10.1 and other AOSP based roms.
Actually I'm using V20S baseband, but I don't know if is better install v30b baseband.
Thx in advance.
Regards Jamm.
Sv: [Q]CM 10.1 (and other AOSP Roms) recommended baseband?
Use v30* baseband
Sent from my bad LG phone
jamm513 said:
Hi m8s,
I just installed CM10.1 official nightly, and I'm experiencing some data drops, so I wanna know what is the recommended baseband for use whit CM10.1 and other AOSP based roms.
Actually I'm using V20S baseband, but I don't know if is better install v30b baseband.
Thx in advance.
Regards Jamm.
Click to expand...
Click to collapse
try flashing v30b baseband ,, if its still there switch to stable cm10
RomWiz said:
Use v30* baseband
Sent from my bad LG phone
Click to expand...
Click to collapse
rrgrrg said:
try flashing v30b baseband ,, if its still there switch to stable cm10
Click to expand...
Click to collapse
Thx very much m8s, I just flashed the v30b baseband, I will tell you later how is going on.
base band
jamm513 said:
Thx very much m8s, I just flashed the v30b baseband, I will tell you later how is going on.
Click to expand...
Click to collapse
Kindly provide me like for v30* baseband for cm 10.1, mine is v20 at the moment and i m experience slowness on my phone