Boot loops everytime - Samsung Galaxy Mini

When i try to flash a stock firmware particularly XXKPK after i see the PASS i disconnect the usb cable and wait for phone to start but it keep restarting to samsung animastion.
I am now waiting for 10 minutes and it is just the same. I followed the exact procedures from this article http://droidangel.blogspot.com/2011/08/samsung-galaxy-mini-s5570xxkpk-android.html
But i can't get to Region selection screen. First i had to do something else to pass the boot loop. I don't remember what i did before but i guess i did a wipe system and cache from recovery and after that i could went inside.
Is this normal or should i pass boot loop after flashing without wiping cache and system...

its normal..

But in the guide writer only mentioned about wiping the cache. And he/she said it after selecting the regional settings. Thats why i got confused.

after flashing, pull out the battery,
put it in again,
turn on into recovery mode,
wipe cache and system/data,
reboot now.
if still bootloop,
try flashing again.
sent from Nokia 3310

Usually it will bootloop maximum 3 times. Try wipe your data,cache and dalvic first before you flash
Sent from my GT-S5570 using xda premium

I did experienced same problem with this case, I just reflash the firmware and it worked like a charm.

Related

Galaxy S Problems - Need Help Fast!

Ok so I have been looking around for two days now and have not been able to find an answer to my problem. I've even searched and tried everything on these forums so please don't ask me to google or use the forums search.
I've got a Bell Canada Samsung Galaxy S GT-I9000M, it was working fine a few days ago and I picked it up to check my messages and it was frozen. After a few minutes I pulled the battery and went to restart the phone.
The phone will now only show the Samsung Galaxy S white logo and simply restart itself and play that logo over and over. If the phone is plugged into the wall it will show the battle charge logo briefly and than restart to the logo. It will go no further than this point.
I have tried to do a factory reset via Home + Power + Vol Up but it seems to reset itself before it will actually load into that menu. Home + Power + Vol Dn will bring me to the download screen which is stable and will not reset the phone.
This is where it gets strange, I have tried Odin and a 100% stock flash on the phone with no luck the phone just sits resetting. After a download of DarkyROM it will actually load the white Galaxy S logo along with the DarkyROM logo and simply go back to resetting.
So the phone is clearly in some state of a working order able to download and accept ROMs but just keeps restarting itself after the white initial Galaxy S logo.
Any and all help would be appreciated! I hope I have explained this problem well enough, maybe it is in need of being brought to a shop to be fixed? Just happens that the warranty expired last week, almost seems coincidental.
Thanks!
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
tptp said:
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
Click to expand...
Click to collapse
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Knagar said:
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Click to expand...
Click to collapse
run through My Android Solutions, link below and do the first step after that to immediately to recovery or download mode , than flash a rescue or resurrection kit from My Android collections, link below, all this done without sim card or exts SD card inserted
None of this has worked, I have tried every trick I can find on the net but I can't seem to get it to go.
As before the phone will go into download mode, will accept roms and so on as shown by the DarkyROM logo showing up and going away with the removal of it.
After every attempt I am still not able to get into recovery mode but am still able to access download mode. The phone seems to be in some state of working order but continues to reset itself only when turned on but will run stable in download mode.
ADB doesn't see the device and even if it did I think it would still just reboot once it started into recovery.
It's almost as if the phone starts and after it shows the starting Galaxy S GT I9000 it just turns itself off for some reason
Is their any way to totally reformat the phone and start 100% from scratch without getting into recovery to do factory reset?
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
This happens sometime. To fix, Do this.
1. Boot into download mode.
2. Flash stock ginger bread with Odin using 512 pit.
3. Now boot into recovery and wipe data/factory reset.
4. Boot again into download mode.
5. Flash devil or semaphore kernel.
5a note. Your phone doesn't need to be able to boot. All we need is recovery mode.
6. Boot into the new recovery and wipe data/factory reset.
7. Format /system.
8. Flash ROM / gapps etc.
9. Boot with success.
10. Happy dance time, brings good luck.
Sent from my GT-I9000 using xda premium
Knagar said:
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
Click to expand...
Click to collapse
ok, try flashing a gingerbread Ezboot loader, visit My Android collections, link below, has complete guide at download page
Well I've tried both suggestions with no luck. I am starting to think it's some sort of hardware problem which I can't understand because it is 100% stable and won't reset in download mode. It will accept ROMs and so on but instantly just starts to restart itself after the first logo is shown. No work around will let me into recovery mode and no method I have found so far will just reload how the phone boots. I guess it's time for a new phone eh chaps?
Knagar said:
Well I've tried both suggestions with no luck.
Click to expand...
Click to collapse
hmm, its strange..anyway, you should remove SIM Card and Ext SD card, and try to use any tool from My Android Collection, to format the Internal SD card and flash a 2e recovery to see , if you can get your recovery back or even a i9000 rescue kit would be good to go after formating your Internal SD card
Formatting you Internal SD card, will resolve any settings, data, delvik cache etc that would be the cause of your initial problem.. there are formatting tools as well a recovery tools that can be used to achieve this
Did u flash the correct stock firmware for ur I9000M? try this http://www.hotfile.com/dl/162558059/7efd7bc/I9000UGKG3_I9000BMCKG3_VMC.zip.html.
Source : http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
Ok progress is being made, first I used Odin to load I9000UGKG3-I9000BMCKG3_VMC in the PDA slot without doing a reboot. Then I loaded JPK_Root_Recovery_2e using just the i9000_Kernel and was able to boot recovery.
After doing a Wipe Cache and then Factory reset the phone went back to a boot loop and I was unable to get back to the recovery menu.
After repeating the first steps I am once again in the recovery mode with no boot loot but am unsure as to where to go from here.
Currently the screen reads
Android system recovery <2e>
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache
-------------------------------------------------
E: Invalid command argument
-- Install from package...
Finding update package...
Opening update package...
# Manual Mode #
--Appling Multi-CSC...
Installing Multi-CSC
multicsc : src /system/csc/BMC/system/ .
*EDIT* Seems once you restart from the recovery mode it goes right back to a boot loop, was not able to apply the SD card update either. So getting to recovery is currently a one time deal without having to go back and reload VMC and 2e. Once restarted all is lost.
You will need to flash another firmware with 3 file method @odin. Search on this forum a firmware and flash it!
Don't worry, u can't brick your phone that easily. I flashed my phone 10times in a day, for boot loops, when i tried to upgrade to 4.0.4
Sent from my GT-I9000 using xda premium
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Knagar said:
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Click to expand...
Click to collapse
I gave u a source, download the guide on flashing through odin. It should work. Dun flash 1 file by 1 file.
EDIT : u can find more firmwares here. http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Pm me if you need any help!
Ok so here is where I am at..
I have tried everything everyone has listed so far. The only think that has made any sort of progress at the moment is going into download mode, connecting to the USB after loading Odin. Using JPK_Root_Recovery_2e I9000_Kernel.tar will bring me to the recovery screen.
wipe cache partition + reboot = boot loop
wipe cache partition + wipe data/factory reset + restart = boot loop
wipe data/factory reset + restart = boot loop
Any of the above mentioned plus loading stock firmware results in a boot loop.
Any of the above mentioned plus loading DarkyROM Resurrection 10.2 will again show the Galaxy S I9000 Logo plus the DarkyROM logo and proceed to boot loop.
Clear cache and factory reset than load of i9000XXJVT pit/pda/modem/csc results in boot loop.
If I am missing something please explain in detail and not shunt me off to some other page.
As before I have tried everything mentioned with no luck at getting past this boot loop. Clearly the phone is able to accept roms and so on so the internel SD seems to be ok but the boot sequence seems scrambled. Strange that it will boot to download and boot to recovery with JPK but upon restart it just boot loops and without Odin and JPK I can only get back to download mode.
Seems to me you also have some partition woes. Try to find an older rom (Milky's worked for me) that requires re-partitioning to be done. Flash via ODIN, wait for 10-15 mins for whole process to complete. CWM flash any rom from there ... (Darky's Extreme also repartitions)

[Q] [Problem] cant access /data

Hi!
My device seems bricked and I have a problem accessing /data.
I'll give you the background...
I'm using cyanogenmod 5.5.0.2 and cyanogenmod 9.
I've been using my device with the these settings for well over a month.
In that time I had some issues with the device shutting down when it was charging, other than that everything has worked flawlessly.
Today it shutdown when I was charging and when I tried to start it, it just showed the Samsung logo then it restarted.
I booted clockwork recovery and I tried several things to get it up and running again.
§ I tried wiping dalvik but that made clockwork freeze (It stops when before the no,no,no,yes,no-list should show)
§ I wiped cache partition, the wipe finished successfully.
§ I tried resetting factory settings with no success (I get the no,no,yes-list. When confirming the device hangs at "formating /data..." )
All I do from clockwork connected to /data and the sd-card freezes the device.
I'm at a complete stop, I have no clue going foreward.
Can anyone help me? That would be much appreciated, and I would love you for it!
Thanks, Jon
I would try to flash the stock rom thru Odin. Get the original honeycomb rom. You can get that at sammobile.com. you'll have to extract the .tar.md5 file out of the zip you'll download. Use 7-zip for that.
Back everything up first and you'll have to rebuild from the stock hc.
Sent from my SGH-I727 using xda app-developers app
Oh god, thanks! It worked.
Or rather, the odin flash failed but somehow that kicked the /data into working mode.
Thanks for you respons <3
Should I put solved tag on the thread?

My phone won't start

Hi. I was installing this rom on my phone http://forum.xda-developers.com/showthread.php?t=1543521 and when it finished installing, I normally pressed reboot. It usually takes a few minutes for the first time to start, but after about 15-20 minutes i thought there was something wrong, so I tried to reboot, and now my phone wont start. I can' get pass ANDROID screen.
Can anyone help me with this?
Did you do factory reset before flashing?
Sent from my GT-S5830 using xda app-developers app
You are in bootloop .
Here is solution.
Go in recovery and do:
Wipe data
Wipe cache
Advanced->Wipe Dalvik cache
And then reboot
The problem was that i couldn't go in recovery mode. After some trying I finally did. So thank you for your answer. I still don't know why doesn't this rom work for me because i tried to install it again but it was the same as previously. So now I installed some other rom, the one I had before, because now I'm afraid to try other roms.
Dont be afraid to try other roms
I had same problem..i wanted to try Gingercrutz rom and i always experienced bootloop
Sent from Ace on CM 10.1(4.2.2)

Galaxy S1 (i9000) flash fail, bootloop

Ok i got hands on Galaxy S1 (i9000) and wanted pimp it a bit. Rooted it and decided to flash with new rom (MIUI MintBerry Eddition).
I've went to recovery mode, wiped data, calvik cache etc.. and then started installing. Durring instalation i got some error and had to restart phone.
After restart i ended up in not ending bootloop (got samsung logo then glitch kernel v13.1 icon and phone restarts, for brief moment i can see some installer running between those boot animations), it happens every 5-10sec so can't even plug and use odin or sdk...
To make it worse either recovery or download mode don't work... Did i brick this phone? Or there is some rescue for me?
This question has been asked so many times and the replies are always the same everytime. Reflash the Stockfirmware or what ever. Or if u can access the recovery menu u can do a factory reset. In most of the situation u just need to wipe cache and dalvik cache. Around 90% is fixable by just wiping the cache and dalvik.
I already read tons of threads about it but my biggest obstacle is that my phone don't have 3 key thing to do to recovery/download mode. Cant use adb too because phone is on for like 5 sec and then restarts so my laptop cant even detect him on time and cant put reboot recovery command
you may need a USB JIG, you can either buy one or make your own http://forum.xda-developers.com/showthread.php?t=1604707

[Q] Can't wipe or format partitions

So my phone has been a little buggy for a while now, nothing major, just kind of annoying so I backed it all up, and went to recovery to wipe and fresh install android. The aroma installer got stuck on wiping cache, so after half an hour I rebooted the phone, and tried to just wipe the partitions from the recovery. same thing, got stuck and I had to reboot. the phone wont boot back up so I guess it was able to wipe the system partition at least, I'm 99% sure its the cache partition thats the problem. I tried both twrp and cwm, and nothing. phone is of course unlocked, and s-off as well. as a side note, I sent my phone in a few months back to have the camera fixed, and they said they replaced the motherboard as well, though when I got it back I was able to wipe the phone no problem. Does anyone have any suggestions?
Fixed. Mods please delete this. thanks

Categories

Resources