[Q] where can I find at&t apn? - Captivate Q&A, Help & Troubleshooting

Can someone point me in the direction of the AT&T APN? I searched stickies. Hope I didnt overlook

Try Google.

Related

Cingular/AT&T cabs HELP

I need some cingular or AT&T cabs for my Herald/P4350/WING. I recently switch carrier so that i can get better service. if there is already a post like this can you point me in the proper direction. Also does anybody know if 3G will work on the P4350( I already know it doesn't but i figure someone might have developed a fix for that LOL).
I was searching for these myself but no luck this is why i started this thread.
Thanks
punkcell

TP2 T-Mobile --- Use on ATT?

Damn, wrong forum. This should have gone in the general discussion forum. I'm really not sure why it's here, I must have been looking at two pages. Sorry.
A buddy has offered to sell me his TP2. He's on T-mobile, I'm on ATT. If he gets the unlock code, can I just pop in my ATT sim and start using it or do I need to do something else?
Also, once I get to know the phone I'll probably want to install one of the custom ROMs; are there problems with doing this?
Thanks in advance. Yes, I searched the forums. I have been active on the ATT TP forum, so I'm going to be new here! Hope this forum is as friendly as that one is!
slack04 said:
Damn, wrong forum. This should have gone in the general discussion forum. I'm really not sure why it's here, I must have been looking at two pages. Sorry.
A buddy has offered to sell me his TP2. He's on T-mobile, I'm on ATT. If he gets the unlock code, can I just pop in my ATT sim and start using it or do I need to do something else?
Also, once I get to know the phone I'll probably want to install one of the custom ROMs; are there problems with doing this?
Thanks in advance. Yes, I searched the forums. I have been active on the ATT TP forum, so I'm going to be new here! Hope this forum is as friendly as that one is!
Click to expand...
Click to collapse
yes put your sim card in and it will work, and no there is not any problems with flashing custom roms you just have to read the guides before you do anything, mostly if its your first time, first you have to HardSPL the fone if not done already, there is a guide for that, and then you should task29 the fone then flash xD also you can flash a radio, look through these forums and you will fine how to complete these, good luck!
Thank You!
Thank you! That's what I wanted to hear! I'm getting the phone tomorrow, so I look forward to checking this forum out more thoroughly!
The only other thing you may want to take note of is that you will not be able to access AT&T's 3G network on the T-Mobile Touch Pro2. The hardware radio does not support their 3G network. EDGE and GPRS will work fine, however.

IS AT&t IMEI BLOCKING!!!!!!!!!!!?

I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
You need to be using a different modem than the one included in the Euro rom. I believe either the Bell Canada or Rogers modems should work to enable voice on ATT. I'm using the Euro JMI rom with the Bell JK5 modem and it works fine for me.
See here: http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions and for some odd reason the sim that came with my samsung is the only one that will work even though my phone is unlocked and i am using another att sim card that has voice and data.
And when i go to check wireless settings it keeps me me in flight mode.
Using JMIv2 here. Just made a call -- seems fine.
I full flashed JMIv2 over top of JMEv4.
Your not doing something correct.
Also please post in the correct subforum. This in no way has anything to do with android development. This belongs in general. Read much??
Sent from my MoDaCo powered Galaxy Tab.
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
mistadman said:
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
Click to expand...
Click to collapse
How so? Its clearly a question, he has a question mark after the million exclamation marks...
Sent from zombie infested Gingerbread.
rushstatus1 said:
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
Click to expand...
Click to collapse
Weren't you on other threads contradicting people about 3g+ voice using service menus?
I am confused about your setup - what model tab? I thought you had t-mobile tab.
Anyway, on an at&t tab use the bell i9000 modem. Check your apn and network mode afteryou reboot.
The iemi blocking by t-mobile stops people from using data.
And besides clubtech does a perfect write up to get everything working. SEARCH IS YOUR FRIEND.
Good point!
Thank you
i appreciate the advice in pointing me in the right direction. but it seems like a lot of you aren't very newbie knowledge friendly. i posted what i was experiencing in the hopes of getting a point in the right direction. not a solution. turns out my Sim card was corrupted. all i had to do is go and grab a new one. i apologize if my question seemed too basic and trivial to you . but it turns out that i just made a logical investigative approach to my problem . I followed rotos guide to the letter so i assumed that AT&T had also latched on to the idea of imei blocking. I have done several apps for the android market ,and am constantly wanting to learn more . some of you have great skill sets but no patience for new comers. but all in all i will not post in the forum anymore if it involves being downgraded for simply asking for help, isn't this why we have forums for the techs the geeks the cpu nerds. who would have thought amongst intelligent people we still deal with aristocracy .
i did have a t-mobile tab and then returned and bought att tab and it works just fine now . like i said in the forum i am learning so please bear with me
Aristocracy has and will always be common among us nerds blame it on our our societal influences.
Regardless of that, people are more upset about you not searching the forum/threads. Please use the search option , it will save us all time and wasted bandwidth. Also post in the correct sub forum. This section is meant for what it was named for, development only. There is a general/ Q&A section.
Once again, I can't stress the search feature enough. It will seriously help. I promise.
Not flaming you, just trying to help direct you
i appreciate it thank you
hey guys im on roto's v4 and it works for both tmous and att

[Q] Just Bought a Used Tab, Where To Start?

My wife decided that she wanted a Galaxy Tab and eventually found one at a decent price. It showed up today and is in great condition and appears to be running a stock ROM. I have a few questions about it and I figured I could get some help here.
It is a CDMA Tab that was subsidized by U.S. Cellular. We don't have that provider locally and I was wondering if it would be compatible with another carrier. My wife doesn't care if it isn't though, she only wanted it for WiFi around the house.
Also, is there any major differences with the U.S. Cellular version that I should know about going in before I drop a ROM on it? And for that matter can anyone recommend a ROM? Thanks in advance for the help.
More info (If you need it):
Hardware Version: SCH-I800.0.3
Baseband: S:I800.0.3.DJ29
Mate, try the developement section... The roms are there, incuding the gingerbread update, you should find all the info you need there but please read the threads...
Read, read and if you can't find any info, read some more then ask questions...
You'll get a lot more help if you show you have read up a bit... Check out the overcome thread for his guide to flashing, there's also some others around, generally for gingerbread, that are helpful...
Cheers...

Need help from an ATT rep porting a number

These reps are like super not helpful with something as simple as porting a number, if anyone works at ATT and browses this forum please lemme, I could use some help from someone intelligent...
I'm not an ATT rep just trying to give some advice but:
If no one responds try the ATT forums, I often see replies by reps, and if you want to stay on Xda try the ATT gnote forum, I feel like there might be more reps over there since they can get it from ATT now.
eikiel said:
I'm not an ATT rep just trying to give some advice but:
If no one responds try the ATT forums, I often see replies by reps, and if you want to stay on Xda try the ATT gnote forum, I feel like there might be more reps over there since they can get it from ATT now.
Click to expand...
Click to collapse
I'll take a look, thx
best off posting in the AT&T section rather than the international note section
I'm a rep, what do you need
JFizDaWiz said:
I'm a rep, what do you need
Click to expand...
Click to collapse
PM'd .

Categories

Resources