Database Develop

[Q] Black screen glowing button

Phone was flashed to 2.2, however after shutting down the phone and booting it up again, I get Black SCREEN + glowing buttons.
Device : Samsung i9000 from Bell running flashed 2.2 Rom.
I've tried following this guide :
STAGE 1 (applies only if you are coming from an earlier Froyo build)
* We are now going to flash the XWJM8 firmware again (Éclair), so make sure that you load the files for this firmware in Odin.
* In PIT, load the 502.PIT file
* For PDA, select the ‘CODE_I9000XWJM8.tar.md5’ file and for PHONE, select the ‘MODEM_I9000XXJM4.tar.md5’ file. Leave all others blank.
* Make sure that the Re-partition box is checked. All other settings should be as shown in the screenshot below.
*Sorry can't post link, forum restriction*
After stage 1, Odin says Passed, my i9000 reboots with still a black screen+ glowing buttons.
I want to start Stage 2, however I can't find the file ‘JPO_JPO_U_JPP.tar’ file.
I've looked up for solution for the last 2 days and can't seem to find a solution anywhere.
Things I've tried on my own without sucess :
Flashed again this time with a CSC from bell, I've read that sometimes without CSC flashing can't be done, but even with the CSC files, my phone is still ''bricked''
Anyone have any idea how to fix this? Ultimately, I want to go back on 2.2 but for now, I just want my phone to boot again =(.

Hate to say it but it sounds like yout internal sd card is dead like MANY OTHERS who have flashed... No way to fix except to send for repairs to bell/samsung...
Sent from my GT-I9000M using XDA App

I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.

Isn't there a way to try and access internal sd card?

Have you try doing a factory reset?

Yeah, I've tried doing so, after reading and researching online, I think this could fix my problem.
forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
see reply #7
However adb doesn't even reconize the phone =/

terranq said:
I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.
Click to expand...
Click to collapse
I diddnt specifically mean that it was the flashing that did it but it is OBVIOUS that it happened after he flashed right???
It is known that flashing will sometimes "speed up" the death of an already faulty sd card and that is what I meant by my original post...
And PS... The number of people reporting their sd cards failing on stock firmware w/ no lagfix or no previous flashes to "unofficial firmware" is WAY lower than those reporting sd card death after flashing or adding lagfixes, etc...

Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing

terranq said:
Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing
Click to expand...
Click to collapse
And again... I did not specifically state that it was the "flashing" that killed the OP's phone. I simply stated that this seems to happen to MANY people after they flash. NOT the same thing...
Did you come to this thread to argue or to help the OP? I simply posted a reply last night stating that it seems his internal SD card is dead so that he could prepare himself for having to send it away for repairs. I did not respond to the OP to get into an arguement with anyone over "what causes the internal SD cards to fail".

Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.

cuem said:
Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.
Click to expand...
Click to collapse
@cuem,
Unfortunately... If it is an actual dead internal sd card (which it seems to be since the steps you followed already did not seem to fix the issue) the only way to fix it is to send it back to Bell who in turn will send it off for warranty repair.
IF you have just purchased the phone within the last 30 days (possibly 60 if Bell is still extending the DOA return policy) and you have a receipt you can take it back to Bell and get an exchange.
Again, unfortunately these are your only options to get this fixed...
Sorry to be the bearrer of bad news...

Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......

cuem said:
Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......
Click to expand...
Click to collapse
Ooooooo... That is not good. The American Vibrant is NOT the same as out i9000 models.
What you need to do now is search the forums for the homemade jig thread that will force your device into download mode. Search the forums and you will find it.
Be prepared to be "handy" as you will have to build the jig from scratch...
Sent from my GT-I9000M using XDA App

Yeah, I've read about the Jig thing, I've also read about heating your phone with a hairdryer,
I'm currently trying out the hairdryer, but it doesn't work =/
Might have to try the Jig thing, which seems a little complicated with ordering since I'm running out of time =/

Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.

This has happened to me, I just flashed with an older version, for me JM5 worked fine.

cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
I had the same thing after flash and spent many hours and tried many different methods to get it back up with no success.
I'm leaving the country for Europe on January 2nd for vacation. This was the last thing I needed... Hopefully I get it back before then, but I'm not holding my breath.

cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
Well... At the very least at least the firmware is now correct so you can send it away for repair if you need to...
Sent from my GT-I9000M using XDA App

I followed this guide
http://www.tunandroid.com/content/i...du-firmware-i9000xwjpa-pour-samsung-galaxy-s/
I believe now oneclicklagfix is installed on my device, can I flash again or that'll brick my phone, how do I uninstall oneclicklagfix if I can't boot up the phone but only acesss clockwork mod menu?

Phone wan't start.

Hi.
I rooted my LG Optimus 2X with Super on click root. It worked great after right after. I uinstalled CarHome and F-Secure, and after that my phone restared.
Now, It would not start. I only boot until the LG logo, and after that it reboot. So it go on and on and on. I can get the phone into ADB, and I'm a newbie on android, so I got no clue what to do. I aslo tried to use the recover program by LG, but I get a message that tells me that my phone does not support the update.
Is there anything that can sovle my problem or do I need to take it to the place I bought my phone?

I had the exact same problem (a hole thread in here). Your phone is bricked (as of now there's no solution as far as I know). When you rooted your phone you lost the warranty, so if unlucky you cannot return it without having to pay to get it fixed... If lucky the might just switch the phone with a new one...
I've sent mine back to the seller and hopefully I'll get a new one...

This thread could be useful for you:
http://android.modaco.com/content/lg-optimus-2x-2x-modaco-com/334664/bricked-lg-optimus-2x/

There's actually new development in the right direction. Paul from modaco (2x.modaco.com) are preparing af NVflash of the 2x, which will completely reflash the memory with the standard rom from stock meaning we should be able to fix the easily...
Should be ready on wednesday...

I've been looking into these two treads, but could not found anything that my fix the problem.
Well, I've got to go to my the seller and hopefully they will fix it fast.

Try to remove the SD card and then try to switch on once more...

I've been trying with and without SD card , Sim card, Battery many times. So I thats not the problem I think

thats why you should freeze apps instead of uninstalling them.
Did you try to hard reset the phone?
If you got an adb connection and root, try to obtain the apk's (search the forum) and push them to system/apps.
Thats all I can think of for now. I'm no expert on this

Did you make a system backup using Clockwork Recovery before you rooted? If so, boot back into recovery and restore the backup. I bricked my phone the first time I installed a different ROM but luckily I had a backup that I was able to restore and try again.
Sent from my HTC Incredible using Tapatalk

xphire said:
Did you make a system backup using Clockwork Recovery before you rooted? If so, boot back into recovery and restore the backup. I bricked my phone the first time I installed a different ROM but luckily I had a backup that I was able to restore and try again.
Sent from my HTC Incredible using Tapatalk
Click to expand...
Click to collapse
The Optimus 2X does not (yet) have Clockworkmod Recovery working. At least not in a way available to the public (MoDaCo's Paul said he would release some stuff next week)

I can't get it to hard reset. When I boot up the phone I hold in the power button and the - volum butten. Then I come to a screen with the droid, I press the home button and I get Android recovery system (3e), but I'm unable to choose anything. I only can switch between the 4 chooses, by pressing +/- volum button.
Nope, can't get it to connect to adb. Tried, but I couldn't manage it.

Well then maybe someone here can point you to actually selecting something from that list. I mean, it has to be possible to "choose" one of the 4 options but I've never owned an android until (hopefully) in 3 weeks so I can't tell you how it works exactly.
Edit: Just checked the manual again, did you make sure you pressed home and vol- for 10 seconds ?

Well, yes. I pressed home and - volum until I got a recover mode or something.
But as I know theres know way to fix this problem atm. I'll have to send it back to my reseller or wait for Paul to release the fix.

Upgraded to v10e, lost root, please help getting it back

Hi all,
I'm pretty much a noob here, though I'm trying to read and figure out what I've done wrong.
I was on v10c and had rooted my O2x using superoneclick, easy-peasy. Had SU going, and TiBackup. Backed up my files to Dropbox, decided to go ahead with the LG update, not realizing it would remove my root.
I had frozen a bunch of apps with TiBackup, and those seem to still be frozen, so that's all good. Everything is mostly working well, except I can only move some apps to SD, some just say it's full, even though there's 3gb free. Oh well, it seems to fix it if I un/reinstall, but I'm not so short of space that it's a big deal.
The annoying thing is that SU keeps popping up saying I'm out of date and of course I can't update it without root and I can no longer use TiBackup. I've tried using Superoneclick again but it thinks I'm still rooted. So I tried un-rooting it, but that didn't do anything as when I rebooted and went back in, Superoneclick still thinks I'm rooted.
Any ideas? Also, please explain it as though I'm dumb, cause for these purposes, I kinda am.
TIA
Oliver
btw, at the mo, I have no interest in custom ROMs or whatnot, just want to be able to backup & restore stuff.

I rebooted my computer, rebooted the phone, plugged it in and tried to un-root it again. This didn't get any popups, though I did get a 'FAILED' message at the bottom of the superoneclick message window, can't remember which operation. Nonetheless, I took it as a positive. Rebooted the phone again.
Now it's stuck in a reboot loop! Ffuuuuu.....!!!!
The battery is low, so I'm going to put it on the charger for a while and see if it decides it wants to boot later.
So for THIS problem, I've read that you should take out the sim and battery for a while and try booting it later, correct? If no go, then do a factory reset?
So if I DO a factory reset, what are the correct steps to root the device afterwards? I assume a factory reset just puts Android v2.2.2 back on but doesn't touch the firmware, so it'll stay at v10e, correct? I figure I'll just have to run Superoneclick once and then I should be good to go, right?
Thanks again,
Oliver
This mucking with my phone scares the bejeebus outta me - I always figure I'm gonna brick it. But it's worth it if I can disable the awful Car Home, F-Secure and the horrible FB/TWitter/Myspace crap that LG cripples the phone with.

Just factory reset phone and then root using superoneclick...if that doesnt work, load custom rom, topogigi would be nearest to stock
Sent from my LG-P990 using XDA App

Okay, I tried to reset it by holding VOL- and then turning the phone on. It says 'S/W UPGRADE Please wait while upgrading' but it appears to be frozen there as it's been sitting on that screen (while plugged in to power) for about 20 minutes.
Any suggestions? Is it safe to pull the battery and try again? Should I have done VOL+ and HOME and then powered it on?
I'm starting to worry here.

I think our phone is unbrickable. I have even tryed to repartition it (failed) and I still managed to fix it. You can follow this guide for going back to stock and then you can upgrade to 10E with lg tool and then do the root. the guide is in greek and i translated it with google translate. Original page here http://www.myphone.gr/forum/showthread.php?t=300529
How to return to the Stock Rom LG 2X
Caution: The perierchomena of internal sd will be erased.
Go here and download the Greece / Italy Firmware.
Download drivers and smartflash here.
Run the SmartFlashTool_P990.exe from PC
Close the phone, remove battery, connect the phone and hold down the Volume down (Here we should see a message "software update" and "COM port" in smartflash will be filled automatically after install the drivers if needed)
Select the "ROM Copy D / L"
Check that the "Normal Mode" is selected
Check that the "Erase CAL" is NOT selected
Press the button "browse" next to "AP Bin:" and choose the (BIN) file
Press the button "browse" next to "CP Bin:" and choose the (FLS) file
Press "Start" and wait to complete the flasharisma
Thanks to Jastonas
These I have tried without any problems, but I have to say:
NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE Pathe ...

Thanks very much for that, orlox.
I did end up getting it working. I don't know what S/W upgrade was all about, but I decided to pull the battery and try a reset again. This time it worked, in no time flat.
Here's the weird thing.
I set it all up from scratch, and when I plugged it in to root it again, Superoneclick said it was already rooted, did I want to go ahead anyway. I said no, then downloaded Superuser - sure enough, rooted. WTF?
Weird, but I'm not going to argue. Everything's working and it's working well. I don't know what app it is, but the more I install, the slower it gets. Not awful slow, but noticeable. A "fresh" phone always feels so snappy. I don't do all that much, but I put on GO launcher, a bunch of apps. I only use 3 home screens. I have the GO FBwidget, APW Calendar, Typoclock and Fancy widget forecast (4x1). Then I've just got some app shortcuts and that's it. It's not laggy. Just..... not quite as snappy as it was before I installed everything. Perhaps I should just can all the widgets? But then wouldn't I just have an iphone?
Anyway, thanks to those who responded.
For those interested, it is still on v2.2.2 and v10e.

if you dont use a2dp bluetooth and fm radio go for cyanogenmod. Youll see a HUGE speed improvment

just go for v20e if in case its still slow, or even Cyanogen. As for me, same thing and same scenario happened, did a factory reset and that's it, its fixed. As for slow performance in v10e, removed most LG apps except SNS and App Adviser and its all good even on the stock LG Launcher

[Q] Troubles with lg flash tool?

Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.

PROlific666 said:
Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.
Click to expand...
Click to collapse
So you want V20P or V10E?
Sent from my Samsung Galaxy S II w/ DUAL BOOT: AOKP / MIUI

I really want V10e if its possible but If not then V20p will work.

I am having similar problems when I try as well. I have tried 5 or six times but tells me something about the b2c not loaded or a connection to the internet. Every time I hit "normal web upgrade test" it throws up a pop up and wont let me proceed any further. It has worked for me twice before, I got the no connection pop up and ignored it, but its not working this time. I set everything up the same from instructions on Acidhazzard rom web site. Please help...

I had to change the port back to 80 and put the orig host file back in the ect file just to download the bc2app then change it all back it worked the first time when i flashed v10k... idk i would delete the lg drivers and everything then start from scratch if i could boot into download mode.
Sent from my LG-P920 using Tapatalk 2

I have been starting...
From scratch. I download the LG flash package and go from there. It does it every time I try. The times I got it to work, I would just hit cancel or OK on the pop up and then hit the OK button I was wanting to hit real fast before the pop up could come back up. I thought it may be a Windows 7 issue (cause I have seen people talk about it) and tried win xp yesterday. Same things happened.

Im running Xp and Im having the same exact thing happen. I got it into download mode finally idk what was going on but now I just keep getting the communications error Ive tried the whole process (each one is like 5 errors) like 3 times now. If it keeps popping up before the update even starts then your probably need to change your small server port from 80 to 9002.

fixed
Somehow after getting the com error 100 times with the flash tool I noticed it had changed my model number back to P925 (I don't know how it did this) I then decided to chance it (after I changed the host file back and changed the port back to 80 and closed the small http server) I went through the LG support tool and clicked start update. After about 20 min of uncertainty during the update and another 5 minutes of self-loathing after getting a bootloop on the at&t screen... I did a hard reset and cleared all data and wah-la... I got it back to V20p. But the flash tool wouldn't flash the v20p for me.. So if I didnt somehow get rid of the P920 model number and back to the P925 model number I don't think it would have worked the way it did.

[Q] Sprint HTC One reboot issue

I got a Sprint HTC One last week, rooted it, s-offed it and flashed several ROMs on it.
My problem is that in every ROM I've tested, the phone reboots after a couple of minutes.
Here are the ROMs I've tried so far:
- CLEAN ROM SPR 2.5
- CM-10.1-20130714-NIGHTLY-m7spr
- MIUI_m7wls_signed_07042013
- Slim-m7spr-4.2.2.build.7-OFFICIAL
- Sprint_HTC_One_1.29.651.10_Stock_Deodexed
- Sprint_HTC_One_1.29.651.10_Stock_Odexed_05.17.13
- Stock_w_Goodies_One_1.06
- viperROM_One_v1.1.0
I'm using TWRP 2.5, advanced wiping: dalvik, cache, data, system before flashing the ROM.
Does anyone have sugestions?

Hi bro...
There's another thread talking about that:
http://forum.xda-developers.com/showthread.php?t=2344478

alexyomar said:
Hi bro...
There's another thread talking about that:
http://forum.xda-developers.com/showthread.php?t=2344478
Click to expand...
Click to collapse
I guess that's a slightly different problem then mine.
My phone is S-OFF already and I've wiped and flashed almost every single ROM out there and the phone reboots (doesn't shutdown) every 2 minutes...
After I read some other similar issues, I'm guessing I'll have to use a RUU tool to fix the problem. The other problem is that I only have Mac and Linux...

I've read a post advising to copy the ROM file to the root of the phone's internal storage in order to do a proper flash.
Since I was always flashing the roms directly from an external usb thumb drive, I thougt it was a good idea.
I copied Android Revolution 2.5 to the phone's memory, wiped everything and flashed it. Installation whas OK so I rebooted. When selecting the wi-fi network on the initial setup I received a message saying "avoiding poor signal network" even thoug my router was about 10ft from me. After finishing the initial setup I rebooted the phone and then it got stuck hard.
Even when pressing the power button for over 20 second it didn't shut down. Now I'm waiting for the battery to die so I can see what happens on the next boot.
Again, if someone can help me on this situation, I'll appreciate it...

1alemao said:
I've read a post advising to copy the ROM file to the root of the phone's internal storage in order to do a proper flash.
Since I was always flashing the roms directly from an external usb thumb drive, I thougt it was a good idea.
I copied Android Revolution 2.5 to the phone's memory, wiped everything and flashed it. Installation whas OK so I rebooted. When selecting the wi-fi network on the initial setup I received a message saying "avoiding poor signal network" even thoug my router was about 10ft from me. After finishing the initial setup I rebooted the phone and then it got stuck hard.
Even when pressing the power button for over 20 second it didn't shut down. Now I'm waiting for the battery to die so I can see what happens on the next boot.
Again, if someone can help me on this situation, I'll appreciate it...
Click to expand...
Click to collapse
press the buttons while holding phone under a bright light and it will reboot, if that rom was a 4.2.2 rom from the intl. forum you're going to have to ruu it.

Aldo101t said:
press the buttons while holding phone under a bright light and it will reboot, if that rom was a 4.2.2 rom from the intl. forum you're going to have to ruu it.
Click to expand...
Click to collapse
This!
Sent from my HTCONE using xda app-developers app

I've only used Sprint ROMs but still got those freaking reboots. Only by using RUU (provided by viperboy) I managed to solve the reboot issue.
Now I'm waiting for a software SIM Unlock solution, since I'm in Brazil an cannot unlock it OTA.
I'll post an update here as soon as I have a solution...