Related
I would like to know how to flash UGJL2 modem on top of I9000XXJPY, using Odin or Heimdall.
Thanks in advance
flash it with CWM, mutch reliable.
i always use the odin,it is easy to use,first you should connect your sgs to pc,and download the rom,after that open odin,and you should choose pit,pda（the rom) file
i always use the odin,it is easy to use,first you should connect your sgs to pc,and download the rom,after that open odin,and you should choose pit,pda（the rom) file
PDA thats a Rom not a modem and does not need pit either .
jje
-download an official rom from http://www.samfirmware.com/, extract
-start Odin.
-Select "phone" and fetch the modem.bin file.
-Only thing checked should be "Auto Reboot"
-Put phone in download mode
-Plug in USB
-hit Start
Let it reboot and thou shalt have signal
I followed these steps, but Odin seems to get stuck, progress bar reach the end but then nothing happens, I left the phone plugged in by 5 minutes, I don't think it should take that long, don't know what I am missing, thanks.
Does flashing a MODEM only with Odin wipe anything from the phone or will it leave everything intact?
Thanks
szqnl said:
Does flashing a MODEM only with Odin wipe anything from the phone or will it leave everything intact?
Thanks
Click to expand...
Click to collapse
Changed the modem in custom rom from XXJPY to DXJPB (I live in Singapore) and everything is intact so didn't lose apps, data, or settings
Am also looking to flash my modem but a general question to the group which might be off-topic but do you guys see noticeable difference with different modems (battery life, performance, call quality)? Am in a similar position to szqnl and live in Singapore so thinking about doing the same thing and wondering how much of difference it will be.
What's the difference between Odin and Heimdall?
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
adrianmak said:
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
Click to expand...
Click to collapse
install zip with cwm
adrianmak said:
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
Click to expand...
Click to collapse
where do u download modem file in zip?? need find my country modem for s3 mini in zip file instead of downloading whole firmware . .
pikachu01 said:
What's the difference between Odin and Heimdall?
Click to expand...
Click to collapse
Heimdall has a big horn that can be heard everywhere and likes to lay around and party while looking out for Armageddon. Odin is more of a warrior and has a spear called Gungnir that was made by a team of master dwarf smiths and could strike any target in his field of view.
michaelmotes said:
Heimdall has a big horn that can be heard everywhere and likes to lay around and party while looking out for Armageddon. Odin is more of a warrior and has a spear called Gungnir that was made by a team of master dwarf smiths and could strike any target in his field of view.
Click to expand...
Click to collapse
Way to necro the thread.
Sent from my C6603 using Tapatalk now Free
HELP
ok this probs isnt the right place to ask but, on my gt-i8190n i antecedently flashed a gt-i9505 modem and now the only thing i can do is go into download mode, when i try any other mode its a stactic looking filled screen, can anyone help me please
shadzz23 said:
ok this probs isnt the right place to ask but, on my gt-i8190n i antecedently flashed a gt-i9505 modem and now the only thing i can do is go into download mode, when i try any other mode its a stactic looking filled screen, can anyone help me please
Click to expand...
Click to collapse
You have posted in wrong thread, for i9000.....
Download mode: good!
Flash with Odin or Heimdall only modem for your phone. Extract it from your last used stock rom, compress to .tar file (in Linux native, in Windows use 7-zip) and choose under PDA in Odin.
Alternatively, you can flash a whole stock image, but it will wipe all your data. Use Odin 3.04 or 3.07 and run it as administrator.
tetakpatalked from Nexus 7 flo
Thanks m8 helped alot
tetakpatak said:
You have posted in wrong thread, for i9000.....
Download mode: good!
Flash with Odin or Heimdall only modem for your phone. Extract it from your last used stock rom, compress to .tar file (in Linux native, in Windows use 7-zip) and choose under PDA in Odin.
Alternatively, you can flash a whole stock image, but it will wipe all your data. Use Odin 3.04 or 3.07 and run it as administrator.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
really helped me my friend, i felt lost for a while
Much simpler and easier by just flashing it in recovery
pryerlee said:
Much simpler and easier by just flashing it in recovery
Click to expand...
Click to collapse
Can you please post a link to the thread where the flashable zips of the basebands are possible to find?
tetakpatalked from Nexus 7 flo
Dear Guru's...
I've flashed the SGS, with JS3 from samfirmware & odin...
Everything looks fine until reboot...
The phone keeps vibrating and do have the following error in recovery mode : 'Update media Can't mount dbdata..."
Conclusion it doesn't boot at all...
Any clues on how to solve that ?
ManyMany Thanks!
can u get recovery mode working ? if so try wipe cache and factory reset.
azzledazzle said:
can u get recovery mode working ? if so try wipe cache and factory reset.
Click to expand...
Click to collapse
Recovery is working, But i do have the error here : " Your storage is not prepared yet etc etc etc.."
And download mode also working...
Is there any rom that I can put ?
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
I've got the same problem. Phone boots in both download and Recovery mode, but it cannot access internal SD since it was formatted in Ext4 by the lagfix (yes, I forgot to bring it back before using Odin).
Is there any way to solve this without sending the phone to Samsung?
azzledazzle said:
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
Click to expand...
Click to collapse
The thing is " I use a stock rom from samfirmware...."...
flashing back to stock rom should remove the ext4 lagfix. did for me anyway.
link for stock firmware is in post above ^^^^
flash it again, and do re partition
azzledazzle said:
flash it again, and do re partition
Click to expand...
Click to collapse
Did that !
I'll try to do it with csc and modem file...
what is reset EFS Phone ?
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
sorry my mistake i assumed you already had 3 files and pit ... yeah that should work
dont tick EFS just the re partition and auto reboot f. reset time
matticala said:
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
Click to expand...
Click to collapse
I'll also try the 3 files method...
keep posted... download takes time !
Indeed solved
HOORAY !!!! i bet your heart was pumping out your chest lol
azzledazzle said:
HOORAY !!!! i bet your heart was pumping out your chest lol
Click to expand...
Click to collapse
Do you have any idea the CSC to you for last JS3 ?
should be included with the firmware u downloaded ??
azzledazzle said:
should be included with the firmware u downloaded ??
Click to expand...
Click to collapse
tHERE IS JUST ONE TAR FILE???
you can flash with just one file. jus put the .tar file into the PDA part of odin. and thats all u need to do. no pit no csc no nothing just PDA
Reboot problems also
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
isokissa said:
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
Click to expand...
Click to collapse
Edit: all worked no worries anymore
Hi,
this might be a stupid question but i want to sell my galaxy s and i need to flash a stock rom. Clockwork recovery is installed (and should stay installed) - so how do I "re-stock" my galaxy?
Its a JPY-Version.
Thanks!
download JPY from www.samfirmware.com
boot into download mode
load JPY into ODIN (usually pda)
Hit start.
Do factory reset
JOB DONE !
Thanks. Is there a way without using ODIN? Maybe download an update.zip somewhere and flash it with clockwork?
azzledazzle said:
download JPY from www.samfirmware.com
boot into download mode
load JPY into ODIN (usually pda)
Hit start.
Do factory reset
JOB DONE !
Click to expand...
Click to collapse
But why You dont want to use Odin? It's Samsung's softeare so it is safe and when your phone will be bricked by offivial software you still have your guarantee.
Sent from my GT-I9000 using Tapatalk
amorph said:
Thanks. Is there a way without using ODIN? Maybe download an update.zip somewhere and flash it with clockwork?
Click to expand...
Click to collapse
Far as I know, no one has every made a update.zip file that contains only stock firmware files. They ones available always contain CF root or some other custom rooting kernel.
Also, why do you wish to keep CWM recovery? It's hardly stock in that case.
so my dilemma is as follows.. i was running continuum 4.1 on my captivate. i decided i wanted to try one of the new gingerbread roms, so my first step was to use odinoneclick 1.0 to get to complete stock and go from there. my luck, odin froze on me at sbl.bin... so i am soft bricked but i can use the vol up/down plug usb method to get to download mode. because i have only used one click before, and not a full odin like 1.7, i am having trouble figuring out exactly what i need, and what steps are necessary to safely get me back to stock using odin 1.7 so i can then load GB bootloaders and stop messing with BL's from now on.. so i suppose my main question is should i first flash eclair before trying to flash GB bootloaders/rom? my other question being, if so, what files do i need, and do i need to place a pit file and repartition? sorry if this is a noob question, i just dont want to screw it up any further and wasnt sure if specific steps must be taken when you are soft bricked.. thanks very much in advance!
No need to flash Eclair. Just flash the KF1 file in this post and then XCal's reorient for GB and you'll be good to go. Just don't boot into the OS after flashing XCal's kernel else you'll get bootloops since it was designed for I9000 based ROMs rather then I897. Just reboot back into recovery after flashign XCal's Kernel and then flash whatever GB ROM you want.
http://forum.xda-developers.com/showthread.php?t=1126704
I personally prefer to flash my phone using Heimdall on my laptop running Kubuntu as it's generally more stable/successful, and it's easier to choose which files you want to flash if you only want to flash specific files (Like the bootloaders).
Also KH3 is out and it looks like it might have updated bootloaders, but it's not a full ROM from what I was able to grab. It's missing the param.lfs, dbdata.rfs, and the pit file. Also has an added SS_DL.dll which I'm not sure what the purpose of that file is since it's a Windows file...
http://forum.xda-developers.com/showthread.php?t=1232703
Moved to Q&A.....
NO QUESTIONS IN DEVELOPMENT PLEASE!!!!!
conantroutman said:
Moved to Q&A.....
NO QUESTIONS IN DEVELOPMENT PLEASE!!!!!
Click to expand...
Click to collapse
my apologies! my intention was to post in q&a but i was at work sneaking on the pc i must have been clicking too fast..
and kyuta... thank you for the suggestion! so is it safe to just use the whole odin package in the link you provided just to get a clean install, and then move on to a rom/kernel of choice at a later time?
im getting a big red FAIL on every attempt at flashing KF1 file with odin 1.3 and 1.7 im not sure which route to take at this point. do i need to flash the pit file with the bootloaders?
dartdc97 said:
im getting a big red FAIL on every attempt at flashing KF1 file with odin 1.3 and 1.7 im not sure which route to take at this point. do i need to flash the pit file with the bootloaders?
Click to expand...
Click to collapse
just make sure u hav right file downloaded...and right click on odin and click run as administrator...try changing the usb ports....and try changing the usb cable...and see if u hav proper driver installed ....
check all these which i hav mentioned...
then u shd be able to go back to either eclair(jf6) or gingerbread(kf1) stock
killer_raj said:
just make sure u hav right file downloaded...and right click on odin and click run as administrator...try changing the usb ports....and try changing the usb cable...and see if u hav proper driver installed ....
check all these which i hav mentioned...
then u shd be able to go back to either eclair(jf6) or gingerbread(kf1) stock
Click to expand...
Click to collapse
Just to add this this: Try using XP service pack 2 mode if you are using Windows 7 x 64.
i have Captivate runnin on 2.3.4 and i wanna flash it with JB. and for that i need to root and install custom rom (Obviously). But i wanna know the best and easiest way to 1st Root It and 2nd Installing Custom Recovery ???
Devilish_Angel said:
i have Captivate runnin on 2.3.4 and i wanna flash it with JB. and for that i need to root and install custom rom (Obviously). But i wanna know the best and easiest way to 1st Root It and 2nd Installing Custom Recovery ???
Click to expand...
Click to collapse
There's a guide in the Dev section (stickied).. a little reading goes a long way!
Basically it's gonna look like this: Stock KK4 w/o BLs with Odin -> Corn kernel with Odin 1.85 (go in recovery to get root) -> Flash custom ROM as per their instructions -> Enjoy!
So yeah, little rundown but you have some reading to do to make sure you understand what you are doing.
Since u r runnin android 2.3.4 then u have gb bootloaders so u r good concerning that.
Simply Odin flash the .tar packaged KK4 Corn Kernel version 7.0A , afterwards reboot into the cwm recovery and install ur rom of choice that u should have copied to ur internal sdcard by now, per said rom's install instructions. (u will have to select to install it twice) Success.
--- Option is there, in the advanced cwm recovery menu, to gain Root access. But the big unrealized fact to a lot of users is that u actually don't need to have Root in order to flash a Developer's Rom. If u follow the method i just laid out. :thumbup:---
Enjoy ur Rom of choice !:beer:
( ninja'd by BWolf56 )
Sent from my SAMSUNG-SGH-I897 using xda premium
4-2ndtwin said:
Since u r runnin android 2.3.4 then u have gb bootloaders so u r good concerning that.
Simply Odin flash the .tar packaged KK4 Corn Kernel version 7.0A , afterwards reboot into the cwm recovery and install ur rom of choice that u should have copied to ur internal sdcard by now. (u will have to select to install it twice) Success.
--- Option is there, in the advanced cwm recovery menu, to gain Root access. But the big unrealized fact to a lot of users is that u actually don't need to have Root in order to flash a Developer's Rom. If u follow the method i just laid out. :thumbup:---
Enjoy ur Rom of choice !:beer:
( ninja'd by BWolf56 )
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
i did exactly as you said and now i can boot up my phone normally but is not goin into recovery, just stucks at at&t logo
Devilish_Angel said:
i did exactly as you said and now i can boot up my phone normally but is not goin into recovery, just stucks at at&t logo
Click to expand...
Click to collapse
Recovery is both volumes+power buttons. You release when the screen flashes usually (there are 2 AT&T image that look the same)
Hold volume + & - together with power button until u see the at&t logo, then release and u should be in recovery.
(Damnit ! ninja'd again !
Ok i guess this means i better get to work. Lol Later.)
Sent from my SAMSUNG-SGH-I777 using xda premium
no sir, no luck with that, still at at&t
4-2ndtwin said:
Hold volume + & - together with power button until u see the at&t logo, then release and u should be in recovery.
(Damnit ! ninja'd again !
Ok i guess this means i better get to work. Lol Later.)
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
BWolf56 said:
Recovery is both volumes+power buttons. You release when the screen flashes usually (there are 2 AT&T image that look the same)
Click to expand...
Click to collapse
no sir, no luck with that, still at at&t
Devilish_Angel said:
not working sir
Click to expand...
Click to collapse
Can you get in download mode? (volume down + power button)
I'd say to retry flashing Corn kernel with Odin 1.85 (don't forget the .pit)
If that doesn't work, flash stock KK4 without BLs, then reflash Corn kernel with Odin 1.85.
BWolf56 said:
Can you get in download mode? (volume down + power button)
I'd say to retry flashing Corn kernel with Odin 1.85 (don't forget the .pit)
If that doesn't work, flash stock KK4 without BLs, then reflash Corn kernel with Odin 1.85.
Click to expand...
Click to collapse
i ddnt understand by ".pit" thing
Devilish_Angel said:
i ddnt understand by ".pit" thing
Click to expand...
Click to collapse
The .pit file.
When you use Odin 1.85, you need 2 files to flash a kernel: .tar and .pit
Your flash most likely didn't work cause you didn't have the .pit file (hence why I said a little reading goes a long way).
It can either be found in here (little search) or on the samsung website.
EDIT: here it is: http://www.droidevelopers.com/attac...752561-[download]-ops-pit-files-s1je4.pit.rar
If you don't know how to use Odin, there are plenty of videos on youtube. Please take time to really understand what you're doing otherwise you'll end up with a paperweight in your hands.
BWolf56 said:
The .pit file.
When you use Odin 1.85, you need 2 files to flash a kernel: .tar and .pit
Your flash most likely didn't work cause you didn't have the .pit file (hence why I said a little reading goes a long way).
It can either be found in here (little search) or on the samsung website.
EDIT: here it is: http://www.droidevelopers.com/attac...752561-[download]-ops-pit-files-s1je4.pit.rar
If you don't know how to use Odin, there are plenty of videos on youtube. Please take time to really understand what you're doing otherwise you'll end up with a paperweight in your hands.
Click to expand...
Click to collapse
So what I understand is that 1st i shud flash corn and then flash pit file, then i'l have root and custom recovery. Right ?
Devilish_Angel said:
So what I understand is that 1st i shud flash corn and then flash pit file, then i'l have root and custom recovery. Right ?
Click to expand...
Click to collapse
No, when using Odin 1.85, you put the .tar file in the PDA and the .pit file in the PIT.
Flashing Corn kernel will give you a cwm recovery and you won't need to root, just flash the ROM you want to as per their instructions.
BWolf56 said:
No, when using Odin 1.85, you put the .tar file in the PDA and the .pit file in the PIT.
Flashing Corn kernel will give you a cwm recovery and you won't need to root, just flash the ROM you want to as per their instructions.
Click to expand...
Click to collapse
Ohh thanks a lot but unfortunately I don't have a PC at home, so I can only try this in the morning. Btw your link for pit file needs registration.
Devilish_Angel said:
Ohh thanks a lot but unfortunately I don't have a PC at home, so I can only try this in the morning. Btw your link for pit file needs registration.
Click to expand...
Click to collapse
Umm weird, well it can be found quite easily on here, just search pit file and you'll find the compliation thread. You need the one for Odin 1.85
BWolf56 said:
Umm weird, well it can be found quite easily on here, just search pit file and you'll find the compliation thread. You need the one for Odin 1.85
Click to expand...
Click to collapse
Could you please confirm me if this is the file needed ??
http://mediafire.com/?tea1dol47r3eqhd
Devilish_Angel said:
Could you please confirm me if this is the file needed ??
http://mediafire.com/?tea1dol47r3eqhd
Click to expand...
Click to collapse
Seems good. The i9000 is the International version of the captivate so it should be fine.
Sent from my SGH-I897 using xda app-developers app
Ok...... thanks.:thumbup:
BWolf56 said:
Seems good. The i9000 is the International version of the captivate so it should be fine.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Ok...... thanks a lot. First thing I do in the morning is to flash it and then report back to you.
BWolf56 said:
Seems good. The i9000 is the International version of the captivate so it should be fine.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
this is what my looks like now after applying tar and pit file :crying::crying::crying::crying::crying: