Related
i need fast rom for my galaxy s plus
and a ics theme for the rom
please
thx =]
Check out BroodROM RC2, already comes with ICS theme.
and i want a ticket to Hawaii and hopefully a few liters of ICS to enjoy under the hot sun
tomi555 said:
Check out BroodROM RC2, already comes with ICS theme.
Click to expand...
Click to collapse
I'm new so
will it work on my phone?
my frimware version is 2.3.3
U cud have put this in an existing thread.Dont cause unessecary pollution!
SaSori495 said:
I'm new so
will it work on my phone?
my frimware version is 2.3.3
Click to expand...
Click to collapse
Its for all rom...but please root first
SaSori495 said:
i need fast rom for my galaxy s plus
and a ics theme for the rom
please
thx =]
Click to expand...
Click to collapse
U have to read hot forum if u want sgs+ fast.. 1st u must to root ur phone it is basic..
Sent from my GT-I9001 using xda premium
just boot into download mode and flash a custom kernel with odin
General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.
Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.
older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2
Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil
strange problem when i try to install this .nb0 it says some kind of error using sut
Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.
Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom
Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.
Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3
hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem
Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!
Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2
I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA
Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA
Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA
bravida engine
does bravida engine work on this room
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.
wic android version of gingerbread do you have on your phone..
sorry for asking again...
CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--
even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??
Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep
can you suggest any app for checking it??
[KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP....
need help on how to install this ROM?
Cn anyone help me step by step?
here's the link
http://forum.xda-developers.com/showthread.php?t=1728461
this is my phone detail
android version = 2.3.5
baseband version = PR323
Kernel Version = Apps_2.6.35.7 -perf
Bro mentioned link for kernel ....????
Not for rom ...
If you want flash kernel only so can flash it ....
Just download the link ...... but its ics kernel and you are using GB ..... first u need to upgrade in ics rom ....
Sent from my FIH-FB0 using xda premium
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
First you need SUT LR 1.8.2. Link to SUT LR which worked for me.
Then you need to download Andro-id V3.3 RC3.
Link to the post
Direct link to the ROM
Flash the ROM with SUT LR. Here is a easy to understand video made by ̶H̶a̶r̶e̶e̶ leoaeries.
Hit thanks to leoaeries H̶a̶r̶e̶e̶ , if the video helped you.
After installation, you will have CWM installed by default
Go ahead and flash ROMs of your choice (be careful you can only install .35 kernel ROM, if you need to try .32 kernel roms you need to downgrade to Gingerbread 2.3.x stock, looks like your stock is .35)
Try ICS CM9, IceColdSandwich or MIUI V4 ROMs, you will like it :laugh:
Welcome to the Android, the world of unlimited possibilities and great user support.
apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know
elol said:
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know
Click to expand...
Click to collapse
I think for QA should be in here, dev section is for development things like bugs report and solving.
Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(
andywang02021 said:
Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(
Click to expand...
Click to collapse
flash sharp rom or andro-id rc3 via sutlr you will get new baseband for newer 35.7 kernel,, and than you can flash any rom or any 35.7 base kernel..
andywang02021 said:
Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(
Click to expand...
Click to collapse
As abenagiel said, it's very simple.
Try to find SUT LR setup in the forum, install it, then download RC3 by TJ style, flash it through SUT LR, then download MIUI V4 by RCSET, posted by COMDEVX in development section, flash that through recovery and enjoy .......
abenagiel said:
flash sharp rom or andro-id rc3 via sutlr you will get new baseband for newer 35.7 kernel,, and than you can flash any rom or any 35.7 base kernel..
Click to expand...
Click to collapse
vivekb said:
As abenagiel said, it's very simple.
Try to find SUT LR setup in the forum, install it, then download RC3 by TJ style, flash it through SUT LR, then download MIUI V4 by RCSET, posted by COMDEVX in development section, flash that through recovery and enjoy .......
Click to expand...
Click to collapse
Thanks! I'll try it when exams are over...
You guys are awesome, thanks for your help
EDIT: HI. Got spare time to flash... It worked! I feel so stubborn....Yeah I'm a newbie in android. Thanks guys!
Help
Hi to All
I want to use a rom with diffrent kernel version to diffrent kernel version
For eg MT has a stable ICS Rom with Kernel 2.6.32.59. I want to use it with either 2.6.32.9 or 2.6.35.7.
What are the changes I need to made if t is possible?
Please share your views
Thanks
Tanuj Chhibber said:
Hi to All
I want to use a rom with diffrent kernel version to diffrent kernel version
For eg MT has a stable ICS Rom with Kernel 2.6.32.59. I want to use it with either 2.6.32.9 or 2.6.35.7.
What are the changes I need to made if t is possible?
Please share your views
Thanks
Click to expand...
Click to collapse
see this link http://forum.xda-developers.com/showthread.php?t=1923298
elol said:
see this link http://forum.xda-developers.com/showthread.php?t=1923298
Click to expand...
Click to collapse
Rom is flashed but touch screen is not working what should I do?
Mt rom is based on kernal 2.6.32.59