i made it with two male usb cable a htc usb cable and a female adaptor i have wired them up as advised on other threads but windows doesnt recognize my usb stick and my phone when plugged in charges but a no show in zune do i need more power to them any advice please thanks
If you post a picture of it, it would be easier to help you out.
Or, you can go ahead and buy a y cable off ebay. It's only about $5
adilaslam said:
If you post a picture of it, it would be easier to help you out.
Or, you can go ahead and buy a y cable off ebay. It's only about $5
Click to expand...
Click to collapse
i did but the pc didnt recognize the usb flash drive it did the phone but not the usb when plugged in through y cable
Related
hi
i lost my USB for PC cable for jabra bt 8010.
please help me, show me what cable i can buy to replace it,
it seems that it can use some other cable to replace.
could you help me
so thanks
could i use the USB for PC cable for BT330/BT500/BT800/JX10/BT 8040 for BT8010.
or could i use universal usb cable which has the same size for this one?
because I tried to find out cable but failed, no one sells that.
please help me to answer this question.
thanks so much
hi, just like you i also need usb cable for my 8010. ive googled high & low but to no avaiL? especially as im in the Philippines . . maybe by this time you have new info? pls help & thanks
Its just a usb-to-micro-usb cable.
thanks, but the micro usb's available on ebay are for motorola & looking at the pics -> - > they look different . .
Micro usb is micro usb. Its a standard.
usb may be a standard, but ...
... apparently the cable ends are not. I've have three different Jabra headsets in the past several years, all of which used a usb charging cable and none of the usb cable ends on the headset side were compatible with each other. I made the mistake of ordering off ebay and the cables I received did not fit my 8010. My advice: Don't buy a usb cable unless the seller can confirm that the cable works with your particular headset.
@kihoalu
thanks very much. if you get wind of a supplier, pls post. im sure there are others who also need this cable
I wish I knew why yours are all different, my 8010 came with a standard micro-USB port. The charger and the computer sync cable are quite normal.
I am attempting to make a Y cable using a few cables that I saw on Ebay, but first I need to know whether it will work or not. This is what I plan on doing:
1. Connect HD7 to original HTC cable
2. Connect the USB end to a female converter
3. Insert a Y cable to the female port (all sides of the Y cable are normal USB 2.0)
4. On one end, insert USB to computer
5. On the other end, add another female converter, and then a micro SD card reader
Do you think this will work? Please, I really need the answer urgently....I'm impatient
Here is a link to a picture I created. It can explain things much better
i40.tinypic.com/muzdc5.png
Thanks in advance, people!
Edit: I found some HD7 unlocking kits which I might be able to use for the goldcard method. Could someone please confirm whether they will work?
bit.ly/uf23iw OR bit.ly/vGjF5l
Just get a y cable
SO I was this weekend to ski and when I came home I couldn't find my usb cable and charger...I have another mini usb cable but it just charging my phone mass storage not working...this is because is not an original usb cable right? Is there any tric or something to make it work?
ilooze said:
SO I was this weekend to ski and when I came home I couldn't find my usb cable and charger...I have another mini usb cable but it just charging my phone mass storage not working...this is because is not an original usb cable right? Is there any tric or something to make it work?
Click to expand...
Click to collapse
if it is charging.....then the pins for the data transfer in the mini-USB cable is not connected.....AFAIK, I think there are no tricks....
one trick is to get yourself a new data cable....
Hi.
I have broken a little the data cable(fisure in base of micro usb part)
Charging works but...i think it will break completely and i dont risk to flash roms with this fisure.
So where can i buy one original from htc? without a lot of expensive? I live in spain.
Thanks!
gade12 said:
Hi.
I have broken a little the data cable(fisure in base of micro usb part)
Charging works but...i think it will break completely and i dont risk to flash roms with this fisure.
So where can i buy one original from htc? without a lot of expensive? I live in spain.
Thanks!
Click to expand...
Click to collapse
It's a standard Micro USB-B cable, you can use any standard compliant cable unless you're in for the *htc* bling. I use a blackberry USB cable for my HD2 and it works just as well as the one which came in the box with the phone.
Rick_1995 said:
It's a standard Micro USB-B cable, you can use any standard compliant cable unless you're in for the *htc* bling. I use a blackberry USB cable for my HD2 and it works just as well as the one which came in the box with the phone.
Click to expand...
Click to collapse
So...can i flash roms with a bb usb cable? I have bb working with usb cable of LG...and if you say it is standard cable i understand why it works...
Edit: I have test bb cable and it charge battery and usb storage works so...can i flash roms with this cable?
gade12 said:
So...can i flash roms with a bb usb cable? I have bb working with usb cable of LG...and if you say it is standard cable i understand why it works...
Edit: I have test bb cable and it charge battery and usb storage works so...can i flash roms with this cable?
Click to expand...
Click to collapse
Of course Micro Usb data cable is for all devices which support Microusb
Its just moving data so there some cables that dont have chargefunction but almost are not
Don't worry
I have Htc,Lg,Samsung usbcables and all of them works well while im flashing roms:laugh:
Hi, i recently rooted my phone and used the Post in the forums to do so, here is a pic of the kernal and all that. My question is why can i still not use my otg? Downloaded host diag, checker, helper, nothing is working. Can someone please tell me where to go from here? There are spaces so i could post the url.
http ://i63. tinypic. com/24ys9z5. jpg
seems kernel doesn't have the driver for it also the phones board doesn't supply power to the cable so you would need a y cable to supply power. Im still waiting for HTC to post the kernel source so I can make the modifications I need to it. It's been almost a month since they said they elevated my request for the source to their dev team if its not posted in a week I'm going to write them again.
There is a app I saw the other day called "stick" something that enabled phones with no otg support to use one. It was in a YouTube video about must have root apps , sorry I couldn't help more than this. I did order an otg cable after watching it.
Ok, ill look to see if it works
Nope. Still won't work. Power must be supplied for it to be registered to the phone.
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Gnnex said:
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Click to expand...
Click to collapse
I had no luck with a powered Y-cable either. I got OTG to work with my XT894 only after connecting a powered USB hub to my OTG cable, then connecting a USB flash drive to the hub.