[Q] Boot Phone w/Broken Power Button w/o USB - Motorola Droid and Milestone General

I was wondering if there is a way to boot up the phone WITHOUT plugging into the usb i have tried taking the battery in and out and it doesn't work.
My phone sometimes shuts off randomly and my power button is broken so i can't just use the power button, this happens to me when i am away from home without my usb i usually just leave it alone and wait for it to turn its self back on but i'm afraid if it doesn't turn it self back on and really dont want to wait until i get home.
(I use Wake All to turn the screen on when it is already powered up and Screen off and lock to turn the screen of, i also have quickboot to turn the phone off.)

The best solution is: go to Motorola customer service and have the power button replaced.
Have a good day!

Related

[Q] Now my power button completely broken, how can I turn N1 on/off?

My N1 power button is unresponsive to any press and I realized it's completely broken. Now I can't turn off screen, turn off a phone and when i turn it off I know I won't be able to turn it on again.
I live outside US and can't get N1 to repair.
Do you guy have a way to turn N1 on without power button ?
Quickboot for shutting down, restarting etc.
Lock enabler for sleeping the screen.
Some short of trackball wake to wake the screen.
To restart from power off, just pull and reinsert the battery a few times, or pull and reinsert the sim.
Theres a thread on here, where someone replaced the power button for about $30...
Sent from my Nexus One using XDA App

[Q] Samsung or Android flaw?

Ive discovered this by accident but while the phone is in standby modus and and the screen is locked, when you press the powerbutton for ~5sec the phone reboots.
In my opinion the "reboot" function mapped to the power button should only be working when the phone is screen unlocked.
Is this a samsung or android thingy?
what do you mean by stand by mode ? when screen is off and not being used ? this doesnt happen on my device...
just dont press the power button for 5 seconds and hey presto !!! job done lol
isn' tthis good feature?
It may help a little when
a. not able to 'wake-up' a sleeping phone
b. upon waking-up , force close message keeps on appearing
In b, i have to take out battery and when using my case-mate barely there cover, it's inconvenient to pry it open.
oops.. I didn't answer your actual question.
Sorry, dunno if this is Samsung thingie or Android thingie. But I can "reproduce" the effect on my phone.
It's not reboot though - it goes to "switch off" mode
SquirtingCherry said:
Ive discovered this by accident but while the phone is in standby modus and and the screen is locked, when you press the powerbutton for ~5sec the phone reboots.
In my opinion the "reboot" function mapped to the power button should only be working when the phone is screen unlocked.
Is this a samsung or android thingy?
Click to expand...
Click to collapse
mine comes up with a message to shut down the phone or enter flight mode or silent mode or data network mode if you hold down the power button for 5 secs in stand by mode.
If your not getting that message first its possible that your firmware is faulty or if its not a stock firmware it may have not been added correctly.
same here i get message.. stock jpy with speedmod kernel
No i meant like for example you put the phone in your pocket like you normally do and the powerbutton gets pressed for ~5sec while your bent down or another position the button gets pressed it would reboot. Im not really happy with that happening would you.
Im on stock js3 onlything i mod was putting the voodoo kernel on it.
Its a good thing
You'll be happy when the phone freezes and you don't need to take it apart to reboot it (pull battery)... Its just like a power button on a PC, if you hold it long enough it shuts the device down. I've never done it by accident though. Just get a $.99 plastic case and your problem will be gone but you'll still have the feature.
G

[Q] Nexus One Power Button

So recently, my Nexus One's LCD cracked while playing cricket.. BOHOO! So I took it to the repair shop, and he fixed my LCD. YAYY! But the repair guy messed up my power on button. Before it used to be so soft and easy to turn on, but now it only turns on if i press it on a certain spot, which is very ANNOYING! I took it back to him and he didn't really fix anything. I just want to ask you if you know any easy solution to this. No, not the trackball wake. Like would it be easy for me to open my phone up and repair the button myself? Or do you think i'm out of luck?
Thank you
Psychokilz said:
Like would it be easy for me to open my phone up and repair the button myself? Or do you think i'm out of luck?
Thank you
Click to expand...
Click to collapse
Do it yourself!
http://www.youtube.com/watch?v=k74D4dGGf4U
well, sadly; my power button has given up finally.
Can anyone help me out by telling me how i'm supposed to turn my phone off completely. I'm using an app which allows me to turn my screen off and lock the phone, but is there one to provide me options for powering off and booting into recovery, bootloader etc? It's essential because i need to be able to turn my phone off to switch my battery packs, and to install new firmwares. Thanks.
Most importantly, how would i turn on my phone when it's completely turned off, since the power button wouldn't do any good
Try "Quick Boot" to switch 4-ways reboot function.
To turn on your N1, simply connect it to charger, whether it is wall, usb, or powerbank one. When the led lights up, pull your battery. As soon as the led down, insert your battery immediately.
My N1 has been "happily" running that way for months.
Sent from my Nexus One
My power button is on the fritz now too. Is there someone who fixes this? Can I make a insurance claim?

fastboot... Help

I've been charging the tablet for 4 hours. It still has a black screen that says fast boot in small letters. This didn't happen with the other one I purchased.
Does anyone have any advice? I want to give it to my daughter tomorrow!
Help!
If you've not been doing anything with it connected to a computer to install things I think you've accidentally pressed volume down when pressing the power button to turn it on.
If so press the power button until it turns off and then turn it back on with hands away from volume controls.
Hopefully just that

Black Screen, won't do anything.

Hello,
I have a rooted and TWRP installed but otherwise stock 5.something T710 that I had worked on months ago. It's been great and my daughter had been using it to watch videos a couple days ago. I took the tablet from her at the end of our road trip and noticed it had about 63% battery left. I left it in the truck while we went to the movies(about 40 degrees f outsides) and then drove home without ever touching it until we got home. I went to use it when we got home and it would not turn on. I plugged it in to let it charge thinking it died for some reason, using the stock charger, though battery icon never appeared. The next morning I went to check it and it still would not turn on.
When I press the power button or plug in or unplug the charger the Recent and Back soft key lights will turn on for a second, then turn back off again.
I've tried:
Holding the power button down alone for over 3 minutes.
Held the power and volume up button for over a minute
Power and volume down for over a minute.
Home, volume down and power for over a minute
Home, volume up and power for over a minute.
I can connect it to my computer and it recognizes that my Tab S2 is connected but no files show as the default for the device was just charging mode and not the file modes.
Odin3 v3.10.7 recognizes it as connected. But fails to send the TWRP file again.
Any help?
Since the soft keys light up and the computer recognizes the device, it sounds like maybe the tab is still working but with no display? By any chance did you have adb working? I f so you could try rebooting, or booting into recovery to see if you see anything on the screen. It's possible that when you held the button combos, that it did boot into download and recovery but you couldn't see anything? In which case it could be a hardware problem. Hopefully it will fix itself! Sorry I can't be of more help..
Well adb shows the device as unauthorized. Reboot command says the same thing.
The home key is unresponsive to my finger print unlocks and no sound plays when I try to adjust the volume, like the ding sound it makes to hear if this is the volume level I want. There are never any of the capacitive touch vibrations or whatever its called to feel when you press a button on the screen.
I was wondering if it had something to do with hardware it's just strange that it would stop working from just being in my truck. From my knowledge it was never dropped or bumped heavily or anything, at least recently.
I guess it is possible something just burned up inside, that would be inconvenient, I've got to look up if its still in warranty. I love the size and performance of this thing.
Thanks for replying, hopefully more to come.
Still can't get it to work, same issues as above. I let the battery fully die which took about 2+weeks from the initial post. Which is to say that eventually the back and recent buttons stopped lighting up. I recharged it and after holding the power button for a few seconds the same condition repeated itself. If I touch the power button or home button the back and recent button back lights turn on for a moment and turn off again. There is no other indication of life. I would assume if it was just a dead screen then I should feel it try to turn on.
If I had to replace parts which ones should I look at first? Probably just the main board?
Buy a new one. Send yours in as defect. Done.
erase111
I see that is an old thread, but I having the same issue to a certain degree. The screen goes dark, but I can see the back light. If I play around enough times, (pressing the back and process button, before pressing the sensor button... Sometime, pressing the volume buttons and back button before pressing the sensor button), everything goes back to normal. Of course, it some random time, even when I am reading a web page or some other activity, it will go back to black.
So has anyone figured out what this issue actually might be? I thought maybe it was an issue with the ROM I was using, so I just moved over to LineageOS 16, but the problem still continues!

Categories

Resources