Database Develop

[Q] Noob flashing 2nd rom Help

Ok a few days ago I flashed my first Rom (Cognition) all went well and before I did it I backed up my oringinal stock 2.1 rom with rom manager, My question is can I restore/recover that 2.1 original rom through rom manager then flash phoenix 2.5 rom or will I have to use odin to restore then Flash my new Rom. Thanks any help appreciated

No
You need to do this
http://forum.xda-developers.com/showthread.php?t=731989

rob1216 said:
Ok a few days ago I flashed my first Rom (Cognition) all went well and before I did it I backed up my oringinal stock 2.1 rom with rom manager, My question is can I restore/recover that 2.1 original rom through rom manager then flash phoenix 2.5 rom or will I have to use odin to restore then Flash my new Rom. Thanks any help appreciated
Click to expand...
Click to collapse
I Have A HTC Hero But I'm Pretty Sure It's The Same....
I'm Not Sure I'm Understanding Your Question, But I Think You Want To Get Back To Your Stock ROM & Flash A New ROM Correct?
If That's It?
You Can, But You Don't Have To Convert Back In Order To Flash Another Rom.... Just "Wipe"
System/Cache/Dalvik Cache,
& Install The New Rom!
You Can Always Restore Back To Your Stock Backup!!
Sent from my HERO200 using XDA App

PMGRANDS said:
I Have A HTC Hero But I'm Pretty Sure It's The Same....
I'm Not Sure I'm Understanding Your Question, But I Think You Want To Get Back To Your Stock ROM & Flash A New ROM Correct?
If That's It?
You Can, But You Don't Have To Convert Back In Order To Flash Another Rom.... Just "Wipe"
System/Cache/Dalvik Cache,
& Install The New Rom!
You Can Always Restore Back To Your Stock Backup!!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
No you can not revert bacj to your stock 2.1 from 2.2 using clockwork with a captivate

Can you explain how to wipe system /cache/dalvix cache or post link i googled it but found nothing with step by step instructions. I would like to try this before odin. Also why does it let you create a back up of 2.1 rom if you cant revert back there from 2.2 then whats the point of backing up 2.1 in the first place. Just thought you could do that instead of odin after reading a post which I was going to post the link to here but wont let me cause Im too new.

rob1216 said:
Can you explain how to wipe system /cache/dalvix cache or post link i googled it but found nothing with step by step instructions. I would like to try this before odin. thanks
Click to expand...
Click to collapse
Do you have rom manager?

Yes Free version

rob1216 said:
Yes Free version
Click to expand...
Click to collapse
I do not recommend flashing phoenix over cognition without a flash to stock, but if you want to try, you can.
Cognition uses voodoo. First thing you should do is disable it.
Find voodoo file in your internal sd. Create a folder in side voodoo folder named disable-lagfix. Reboot phone.

Ok its disabled, but If Odin is the best way to go maybe I should try it but just been reading about higher risk of bricking phone using odin. Just really want to try different rom because cognition it smooth as butter but battery life is killing me compared to stock and yes I tried the charging battery to 100 then unplugging shutting down charging to 100, reboot, shut down then to 100 again no help. Anyways if I use Odin does voodoo have to be disabled also.

Pull your battery. Obviously power off first. Under battery is a build number, mine is 1008. Tell me yours

mine is 1010

Odin may be difficult to use. You may want to research your build more. Anything over 1008 is where odin is an issue
What is your base
Settings, about phone, bottom

Damn i didnt want to hear that,Says baseband version I897UCJI6 is that it.

Yes that is it.
Being on build 1010 I an not comfortable with telling you how to proceed. You need advise from someone who flashes with that build. It behaves differently with odin. I am sorry. Search build 1010

Ok thanks for your help, Ill look around

If you've never flashed with Odin one-click before, try this instead to avoid any risk of bricking (very likely on some build 1008-1010 phones that don't run JF6 stock):
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36

Has anyone with a 1010 tried this with success

GGXtreme said:
If you've never flashed with Odin one-click before, try this instead to avoid any risk of bricking (very likely on some build 1008-1010 phones that don't run JF6 stock):
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Click to expand...
Click to collapse
rob1216 said:
Has anyone with a 1010 tried this with success
Click to expand...
Click to collapse
Me And several people I suggested it to. But now I have a batch 1009 Captivate (traded in mine because of random shutdown issue).

saved my cappy once

I guess I'm confused...is odin really necessary at all for him? If he disables voodoo lagfix, and clears dalvik cache, he should be able to flash over the top...correct?
I flashed cognition 3.02 direct to andromeda 2.0 via cwr and did not clear dalvik or disable lagfix (since cog and andromeda both enable voodoo)...no problems for me.
Maybe it's different/more complicated flashing over the top to the ROM he wants to go to though...
i897 running Andromeda 2.0

[Q] Can't Go Back To Stock!

First I have a Captivate 1007.
Very easy to get into Download Mode so I know the phone isn't bricked.
I was running a version of Serendipity Rom. I wanted to try something different.
So I used what I always use the ODin3 One-Click Stock back to Eclair.
I get nothing but a boot cycle showing the AT&T screen.
Must I go to Stock Froyo now?
Would appreciate some guidance as I'm stuck after a few hours of searching!

Have you tried to flash odin again
CM7

Frawgg said:
First I have a Captivate 1007.
Very easy to get into Download Mode so I know the phone isn't bricked.
I was running a version of Serendipity Rom. I wanted to try something different.
So I used what I always use the ODin3 One-Click Stock back to Eclair.
I get nothing but a boot cycle showing the AT&T screen.
Must I go to Stock Froyo now?
Would appreciate some guidance as I'm stuck after a few hours of searching!
Click to expand...
Click to collapse
have read someone something the same what only works with him is flashing the leaked froyo. you may flash back to stock eclair after everything is working.

The leaked Froyo from Eugene?
I have that one I was just hesitant to flash it.
There is no .PIT file with it though. Is that ok?
EDIT:
Just tried with Odin3 1.7 got Eugene_JK2_Froyo.tar (2).md5 is invalid.
Going to try this one I897UCJI6-OCD-REV02-Low-designgears.exe

Frawgg said:
The leaked Froyo from Eugene?
I have that one I was just hesitant to flash it.
There is no .PIT file with it though. Is that ok?
EDIT:
Just tried with Odin3 1.7 got Eugene_JK2_Froyo.tar (2).md5 is invalid.
Going to try this one I897UCJI6-OCD-REV02-Low-designgears.exe
Click to expand...
Click to collapse
the designgears revo 2

mcord11758 said:
Have you tried to flash odin again
CM7
Click to expand...
Click to collapse
I have 1007 build, I would have to agree with ^^this^^.
Something might of happened in the flash. Try it again.

Use these specifically.
2.1 - http://www.megaupload.com/?d=SBSMALFJ
2.2 - http://www.megaupload.com/?d=QL6NX702

Working now after flashing with I897UCJI6-OCD-REV02-Low-designgears_1_.exe
What do you guys recommend flashing now back to original Eclair stock or staying?

Really up to you at this point. I don't bother with stock (original) firmware as they are bloated and whatnot.

Indeed. Going to try something with good battery life now!
Thank you for all the help fellas!
EDIT: Also I can't go back to 2.1 Stock. Only 2.2 Stock!

[Q] GB Bootloaders

I am running Cog 5B2. It has the captivate GB bootloaders. If i want to change to a i9000 GB rom say Apex do I need to change bootloaders or will the GB captivate ones work?

No you do not need to change bootloaders to go to any other gb rom. Plus I've read on here that the gb bootloaders are backwards compatible with froyo/eclair though I have not confirmed that yet myself.

So there really is no need to ever flash bootloaders again.

I wouldn't say never. But it is good to avoid flashing bootloaders if possible, if something goes wrong flashing bootloaders can result in an actual bricked phone.
On the other hand just flashing roms, kernels and modems sans bootloaders the worst you can likely do is get into soft brick situation or a bootloop which can be easily fixed.

Yup I flashed Serindipty7 right on top of cog 5.2 and then Mosaic V right on top of that no issues to report just make sure you wipe data factory reset before. I haven't flashed anything that has the talon kernel, but still no need to flash bootloaders
Sent from my phone on vacation

Keep it mind GB bootloaders are not backwards compatible with all of them. I know that CM7 does not work with GB bootloaders.

I prefer the I9000 gb bootloaders. They both work the same but The captivate ones have the same button combos which I've always thought were really stupid. The I9k's combos are just more intuitive and simplistic the way they should have always been if you ask me.
Vol up + power = recovery
Vol down + power = download
Nice
Clean
Simple

Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.

vdubguy said:
Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.
Click to expand...
Click to collapse
Try flashing to stick KF1 before flashing a new rom (there is a 1 click without bootloaders to minimize risk)

I haven't still figured out a reliable way to flash back to Stock Froyo on my 2 captivates which ended up being bricked. I was on Cezar's 897 GB bootloaders. Tried flashing back to Froyo KB1 from here but it failed using Odin3 1.3. I got a new phone, which now has stock KB2. Does anyone know how to flash stock Froyo reliably ?

prbassplayer said:
Try flashing to stick KF1 before flashing a new rom (there is a 1 click without bootloaders to minimize risk)
Click to expand...
Click to collapse
Really didn't know there was a 1 click without bootloaders. Time to hit up the search!

vdubguy said:
Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.
Click to expand...
Click to collapse
I read someone have similar issue and I was also on cog5b2 and followed their instructions (which I'm going to paraphrase now) and worked perfectly. I'm now running Mosaic V with the KF1/i897 boot loaders...
OP on Mosaic V has link for xcal's 1.2 i9000 kernel.tar download that. Start at step 5 on that OP, use Odin 1.7 (linked as 'Files you will need' in the MV OP) to flash xcal's kernel, make sure to not auto reboot from Odin and when it's done flashing kernel, do a battery pull and then go to recovery mode, factory reset and then flash Obsession.
Sent from my GT-I9000 using XDA App

vdubguy said:
Really didn't know there was a 1 click without bootloaders. Time to hit up the search!
Click to expand...
Click to collapse
This is KF1 without Bootloaders

Madtowndave said:
I read someone have similar issue and I was also on cog5b2 and followed their instructions (which I'm going to paraphrase now) and worked perfectly. I'm now running Mosaic V with the KF1/i897 boot loaders...
OP on Mosaic V has link for xcal's 1.2 i9000 kernel.tar download that. Start at step 5 on that OP, use Odin 1.7 (linked as 'Files you will need' in the MV OP) to flash xcal's kernel, make sure to not auto reboot from Odin and when it's done flashing kernel, do a battery pull and then go to recovery mode, factory reset and then flash Obsession.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Cool Thanks everyone for the help. I may try Obsession again tomorrow. Gotta hit the sheets....and up early for work.

Srikar_NBK said:
I haven't still figured out a reliable way to flash back to Stock Froyo on my 2 captivates which ended up being bricked. I was on Cezar's 897 GB bootloaders. Tried flashing back to Froyo KB1 from here but it failed using Odin3 1.3. I got a new phone, which now has stock KB2. Does anyone know how to flash stock Froyo reliably ?
Click to expand...
Click to collapse
this is the recommended way to go back to stock that contains both main and secondary bootloaders http://forum.xda-developers.com/showthread.php?t=731989
also this one which contains no bootloaders http://forum.xda-developers.com/showthread.php?t=995143

CremeFraiche said:
this is the recommended way to go back to stock that contains both main and secondary bootloaders http://forum.xda-developers.com/showthread.php?t=731989
also this one which contains no bootloaders http://forum.xda-developers.com/showthread.php?t=995143
Click to expand...
Click to collapse
Yes, but aren't both of them methods to go back to Eclair and not Froyo ? My earlier Cappy got bricked bcoz I tried stocking back to Eclair, when it came with Froyo.

My question is how do you flash custom rom while on kf1 boots? Running cog 5 beta 2 with cwm4. Can I flash roms like I did before via cwm, even though I'm on cwm4, or should I flash a kernel with cwm 2 or cwm3 first, than flash rom thru that?. This question is for both froyo and GB/i9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App

Cdub3 said:
My question is how do you flash custom rom while on kf1 boots? Running cog 5 beta 2 with cwm4. Can I flash roms like I did before via cwm, even though I'm on cwm4, or should I flash a kernel with cwm 2 or cwm3 first, than flash rom thru that?. This question is for both froyo and GB/i9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Well most roms have a Kernel that they recommend. Best I can figure if you want to flash a froyo rom go back down to stock eclair with one click (don't flash bootloaders) and flash rom of your choice. For GB just flash stock KF1 and flash gb rom? That's just me guessing though.

prbassplayer said:
Well most roms have a Kernel that they recommend. Best I can figure if you want to flash a froyo rom go back down to stock eclair with one click (don't flash bootloaders) and flash rom of your choice. For GB just flash stock KF1 and flash gb rom? That's just me guessing though.
Click to expand...
Click to collapse
Oneclick eclair contains bootloaders.
To simplify my question, are rom flashes compatible with cwm4, or do I need cwm2/or 3 to flash roms, whether froyo/GB?
Sent from my SAMSUNG-SGH-I897 using XDA App

Cdub3 said:
Oneclick eclair contains bootloaders.
To simplify my question, are rom flashes compatible with cwm4, or do I need cwm2/or 3 to flash roms, whether froyo/GB?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
JF6 is eclair is it not? If it is here is a JF6 odin with out bootloaders. If Jf6 is Froyo well my mistake. Still 2.2 stock would still work i think. Point is cmw version wont matter if you go back to stock and flash from there, and its usually a better idea to flash to stock anyways.

Kernel flashing problem.

Okay, just got a captivate. I rooted it no problem. I couldn't flash cwm to flash cm7 without a custom kernel that has cwm on it. So I got odin3 1.7 got my phone into download mode and flashed first the cornkernel, once the phone booted up it had a crazy screen with all kinds of colors. Okay, wrong kernel, then I did boog Kernel, same thing. Can someone point me to a kernel for the stock 2.2 rom that has cwm so I can get cm7? Sorry to post, but there is so much info and I've already spent hours trying to find it.

Found one here. So, anyone coming from stock and you want CWM, use the kernel. http://forum.xda-developers.com/showthread.php?t=893880 Boy I tell you, took forever to find.

actorman46 said:
Okay, just got a captivate. I rooted it no problem. I couldn't flash cwm to flash cm7 without a custom kernel that has cwm on it. So I got odin3 1.7 got my phone into download mode and flashed first the cornkernel, once the phone booted up it had a crazy screen with all kinds of colors. Okay, wrong kernel, then I did boog Kernel, same thing. Can someone point me to a kernel for the stock 2.2 rom that has cwm so I can get cm7? Sorry to post, but there is so much info and I've already spent hours trying to find it.
Click to expand...
Click to collapse
You need GB bootloaders to use a GB kernel I believe.

RTFM
prbassplayer said:
You need GB bootloaders to use a GB kernel I believe.
Click to expand...
Click to collapse
That is correct. Corn is based on the KK4 source (Gingerbread). You must have the gingerbread bootloaders to use Corn. You (OP) might want to double check the directions for CM7 before you attempt any more flashing. Reading the instructions first can help prevent you from turning your device into an expensive paperweight. The instructions include how to go from 2.2 to CM7. They are HERE

Once I got the right kernel I was able to flash the newest nightly with no trouble. I'll have to start with the wikki next time, thanks for the link. It just turned into a mess going through these forums and Google, because this devices has been out a while and there were so many ways to do things, and a lot of them no longer supported.

I always like to include a link rather than just say go search. I've tried searching for certain keywords before and you get just about every thread in the dev section returned.
I found that issue moving to a ROM the other night. The developer suggested flashing to KJ3 stock then flashing Boog to get CWM. I figured I would just flash KK4 stock, then flash Corn, get CWM with that, and then flash the ROM (which included corn anyway). There are so many ways to do most things on the Captivate these days.

Where do I go from Serendipity VII?

I have been on Serendiptiy with my I897 for over a year. Now with ICS coming out, I was wonder where do I go now? Serendiptiy VII is no longer update and I am hesitate to go to ICS if its not as staple as VII has been.
Open to suggestions as a I continue to read more posts on ICS.
Thanks MikeyMike01 for a wonderful ROM!!!

alan7825 said:
I have been on Serendiptiy with my I897 for over a year. Now with ICS coming out, I was wonder where do I go now? Serendiptiy VII is no longer update and I am hesitate to go to ICS if its not as staple as VII has been.
Open to suggestions as a I continue to read more posts on ICS.
Thanks MikeyMike01 for a wonderful ROM!!!
Click to expand...
Click to collapse
I've been using Mike's rom for months before but after he left the Captivate scene and not updating his rom, I've switched to many different roms. Now I'm using Teamhacksung's ICS and it's stable for me so far, no problems, issues and whatnot. You could give it a shot or if you don't want to go with ICS, try Gingerbread roms instead.

Where you go from here is up to you..and if you don't like where you go it's not permanent, so try a few or all of them til you find something you like.

ICS bound
Serendipity VII is a GB rom. I want to go to ICS so I think I will give it a try. Just wonder is it easy to get back to a GB rom from ICS without going back to factory eclair?

alan7825 said:
Serendipity VII is a GB rom. I want to go to ICS so I think I will give it a try. Just wonder is it easy to get back to a GB rom from ICS without going back to factory eclair?
Click to expand...
Click to collapse
What I do if I wanna go back to Gingerbread roms is always flash back to JF6 which an Eclair rom and then start from there. Not sure if it's possible not to flash back to stock for downgrading.

sNoxious said:
What I do if I wanna go back to Gingerbread roms is always flash back to JF6 which an Eclair rom and then start from there. Not sure if it's possible not to flash back to stock for downgrading.
Click to expand...
Click to collapse
I have Stock ATT on a flash drive for just such occasions. I had to flash back to stock once before so I know I can get back to the beginning. Just not sure what ICS is going to give me that I don't have now. I am still reading the 500+ posts in the thread.

sNoxious said:
What I do if I wanna go back to Gingerbread roms is always flash back to JF6 which an Eclair rom and then start from there. Not sure if it's possible not to flash back to stock for downgrading.
Click to expand...
Click to collapse
of course its possible to go back to stock... use odin with re-partition and a pit file OR just odin one click....

TRusselo said:
of course its possible to go back to stock... use odin with re-partition and a pit file OR just odin one click....
Click to expand...
Click to collapse
Or heimdall... We got one-clicks of that too. You'll need something PC based because only CM based ROMs repartition in CWM.
leaked from my ICS- FUSED SGS I897 contaminating you via XDA app.