Related
Hi all,
i got my sgs like 3 weeks ago and started to work with it. 1 week ago i saw the battery mod which i would have liked to install but couldnt.
Thing is, i'm on a I9000-HKYAMN 2.2.1, the recovery mode is 3e which wont let install zip bundles nor i have be able to get into clockwork, also tried to install the battery mod via adb but it just wont do.
I started lurking here, and have been taking a look to the kernels and roms avaliable.
After reading the FAQ i got to clear many things i didn't understand but still i wanted to ask for advice. I've seen many different ROM's and kernels but im still not sure.
I'd like to get the 2e version of recovery, or at least be able to get the clockwork's one, which would be far able enough to do the little things i'd like to.
Where would u recommend to start looking at?
thank you in advance
As I understand it, you just need to flash a kernel using ODIN that is CWM compatible. Such as SpeedMod, or SOK, or DamienGTO's...just about all kernels on XDA, really. Once the new kernel is flashed, install Rom Manager from the Market and have it flash your recovery with Clockwork.
The first kernel I flashed was SpeedMod, since his instructions for flashing via ODIN are very clear and very easy.
Good luck
Thank you very much. Just two more questions:
Does it matter the version of the kernel? (ex. my is XXX, the other is YYY. Is it a problem?)
Flashing the kernel makes everything on sgs fly away isn't it?
thank you very much
Assuming that you aren't root, you'll have to use Odin to flash a new kernel. I would recommend the speedmod kernel. Here: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html you can get the drivers, Odin and the kernel. Following the guide it shouldn't take more than 5min to flash the new kernel. You will get the ClockworkMod recovery, which brings many tweaks and the ability to run zip files from the SD.
Neosepia said:
Thank you very much. Just two more questions:
Does it matter the version of the kernel? (ex. my is XXX, the other is YYY. Is it a problem?)
Flashing the kernel makes everything on sgs fly away isn't it?
thank you very much
Click to expand...
Click to collapse
Just get the latest version (K13C at the moment).
What do you mean with "fly away"?
No, flashing the kernel won't wipe your data or apps...at least it never has for me. Just be sure you follow the directions on the SpeedMod site EXACTLY.
Hey guys so I managed to upgrade my ROGERS captivate to stock 2.3.3
and succesfully rooted it. And I'm noticing lags and in general, it's slower than my older stock 2.2 with One Click Lag Fix..
I used to score almost 2k on 2.2
but now with rooted 2.3.3 I only score 1k. Is there some sort of lagfix I can do to make it less laggy and more fluid/smooth? Or should I just go back to stock 2.2 and lag fix it?
No Only 2.3.3 native rom to use lag fix was Cognition 5. That was KF1.
Uhm what does that mean? I'm kind of new.. so is that a custom ROM or something? if it is, can I flash it on a ROGERS captivate?
Any rom made for or ported to I897 would work on your I896. If you are going to move to a rom I would recommend Fasty KI2 that has Voodoo, or Fusion roms.
Thank'd
this is what you're talking about right?
http://forum.xda-developers.com/showthread.php?t=1283828
I kind of know how to flash custom ROM's but I'm not sure what
"YOU MUST HAVE GB BOOTLOADERS" means >.>
I know that I have to get stock 2.1 and root it and then flash it...
No dont go back to stock. If you want flash a stock KI2 or KH3 with out bootloaders and use Boog's cwm kernel and flash fasty.
uhm.. to be honest I don't really know what that means @[email protected]
but wouldn't this work?http://forum.xda-developers.com/showthread.php?t=884364
I'm thinking just getting stock 2.1 then rooting it and then flashing...
seems more simple o:
so would this work?
For froyo roms ya. For Gingerbread is a whole other can of worms. If you are already on Gingerbread then just flash a kernel with cwm (not sure what gb you are on) and factory reset, wipe cache, wipe Dalvik and flash rom.
I tried installing CWM recovery with ROM manager but
when i press it it says confirm phone model and
galaxy s i9000, nexus and other phones show but not
captivate.. and which kernal do I have to flash?
Read READ READ READ READ READ and read some more. If you don't know what gb bootloaders are that should at least have 15min of reading by it self. Also, read the stickies (the posts with thumbtacks) in the development section.
Rom manager is useless. You need too flash a Kernel with CWM cooked in it. With either kernel flasher (app), ODIN or Heimdall.
T-T I poked around and read some threads.. but I'm not sure what my GB bootloaders are T-T i'll list some stuff and maybe that is the GB thing
PDA:1896UXKH2
PHONE:1896UXKH2
CSC: I896RWCKH2
T-T
so I just find any kernal with CWM and then flash it using odin?
and if i do use odin do i use .pit file?
You are on Rogers Gingerbread. You have GB bootloaders. Flash KH3 with out bootloaders found here, Then flash kernel found here (use the ODIN KH3 one). Use CWM do a factory reset, wipe cache and wipe Dalvik cache then flash Fasty or wich ever rom you like and Profit. If you going to use a Fasty with Voodoo, these kernels take a long time to boot and if voodoo is enabled you will hear chirping and take even longer.
This ins't the only way, its what I would do atleast.
Thanks so much I'll try it as soon as I get home
Sent from my SGH-I896 using XDA App
Uhm.. you put the same links twice i think both of them are
http://forum.xda-developers.com/showthread.php?t=1233620
Kernel is this. You can use the search in the dev section.
Thanks! I'm going to try it now
I'll post results shortly after
I successfully flashed kernal and I hace cwm recovery now but
I can't download the fantasy 3 :/ the link is broken..
Fantasy? Im going to assume Fasty?
Edit: it seems his site is down. Going to have to wait for it.
yea I meant fasty*
I guess I'll have to wait then since fasty looks like the best option out there :/
Hello all,
I have a few general questions that I would really like some help with:
1.) I understand some bootloaders are not compatible with some ROMs. How do you know which bootloader you are running? How do you change your bootloader, must you use ODIN?
2.) How does the kernel come into all this, are some kernels not compatible with certain ROMs and bootloaders? When you flash a new ROM, does it sometimes come with a new kernel?
The main reason I am curious about this, is because I wish to flash the new Cyanogenmod 7.1 and want to be sure I am successful and do not brick my captivate. I am currently running Serendipity VII Build 2 and want to be as safe as possible when flashing Cyanogenmod 7.1.
Would the safest way be to flash to stock first using the following Odin one click method: http://forum.xda-developers.com/showthread.php?t=731989
Then from there, follow the instructions normally?
All help is greatly appreciated.
There are basically 2 types of bootloaders, Eclair/froyo and Gingerbread bootloaders. GB bootloaders are compatible with preatty much everything (not counting cm7 or MIUI).
Kernels are specific with a type of rom, example Boogs KH3 kernel worked with any rom that was based on KH3 (2.3.4). Some are tweaked specifically for a rom.
On CM7 and MIUI from what I can make out you can run it on either eclair/froyo bootloaders or GB bootloaders but some kernels are specific for bootloaders.
If you are on Serendipity then I am sure you used ODIN to flash i9000 boatloader (BL).
As the above person said there are eclair/froyo BL and GB BL....in GB BL we have captivate BLs and i9000 BLs. earlier GB roms used i9000 BL...then Samsung leaked captivate specific roms...so we have captivate BLs now..
All the one click Odins are used to flash captivate specific BL...
To go to CM7, many people flash it over GB bootloader and have no problem....but the safest way is to odin back to eclair/froyo stock...then go from there.....
viny2cool said:
If you are on Serendipity then I am sure you used ODIN to flash i9000 boatloader (BL).
As the above person said there are eclair/froyo BL and GB BL....in GB BL we have captivate BLs and i9000 BLs. earlier GB roms used i9000 BL...then Samsung leaked captivate specific roms...so we have captivate BLs now..
All the one click Odins are used to flash captivate specific BL...
To go to CM7, many people flash it over GB bootloader and have no problem....but the safest way is to odin back to eclair/froyo stock...then go from there.....
Click to expand...
Click to collapse
Thank you for the help guys, I really appreciate it.
I will be flashing back to stock using the following method:
http://forum.xda-developers.com/showthread.php?t=731989
Then I will simply flash CM&.1 on top of that.
I will report back to let everyone know how it goes.
did your phone come with froyo on it/what is the build number of your phone? its a 4 digit number on a sticker under the battery, for example mine is 1010, meaning oct. 2010. many phones built later than this, and/or came from the factory tend to bootloop from jf6 (the firmware containedin that one click) and have also been known to lose button combos for recovery/download mode which would need both if you were bootlooping and for cm7.
if you have a later build phone it would be better to flash a leaked gingerbread firmware with bootloaders included and then flash a custom kernel with cwm included so that you can then flash cm7 from there.
studacris said:
did your phone come with froyo on it/what is the build number of your phone? its a 4 digit number on a sticker under the battery, for example mine is 1010, meaning oct. 2010. many phones built later than this, and/or came from the factory tend to bootloop from jf6 (the firmware containedin that one click) and have also been known to lose button combos for recovery/download mode which would need both if you were bootlooping and for cm7.
if you have a later build phone it would be better to flash a leaked gingerbread firmware with bootloaders included and then flash a custom kernel with cwm included so that you can then flash cm7 from there.
Click to expand...
Click to collapse
I purchased my phone at the end of August in 2010. The only 4 digit number I can see reads " 0168", it is the largest number located behind where the battery is held. And yes, I have lost my three button combo for recovery/download mode. It stopped working, and I bet it was because I used that one click method you mentioned.
Do you recommend I flash this one:
http://forum.xda-developers.com/showthread.php?t=1129821
It says Cyanogen Mod users stay away, why is that?
or one from the official list, and if so, which one:
http://forum.xda-developers.com/showthread.php?t=1300843
Also, I am a bit unclear. After I flash one of the stock ROMs with the bootloaders, how can I then flash a kernel with CWM. Can I do it through ODIN?
And just out of curiosity, why can you not use these stock ROMs for everyday use? It seems we always flash other ROMs on top of these?
I know I asked a lot, I would appreciate the help!
rcllcr said:
I purchased my phone at the end of August in 2010. The only 4 digit number I can see reads " 0168", it is the largest number located behind where the battery is held. And yes, I have lost my three button combo for recovery/download mode. It stopped working, and I bet it was because I used that one click method you mentioned.
Do you recommend I flash this one:
http://forum.xda-developers.com/showthread.php?t=1129821
It says Cyanogen Mod users stay away, why is that?
or one from the official list, and if so, which one:
http://forum.xda-developers.com/showthread.php?t=1300843
Also, I am a bit unclear. After I flash one of the stock ROMs with the bootloaders, how can I then flash a kernel with CWM. Can I do it through ODIN?
And just out of curiosity, why can you not use these stock ROMs for everyday use? It seems we always flash other ROMs on top of these?
I know I asked a lot, I would appreciate the help!
Click to expand...
Click to collapse
You can use the bootloaders in the first link. At the time of that thread's opening, cm7 didn't support GB bootloaders. But, if your not sure how your phone will work with a1 click, I would recommend using the ones linked in my sig.
As for how to flash those roms, there are directions in the first post of their respective for flashing.
You can use a stock ROM everyday, most just prefer not to.
mrhaley30705 said:
You can use the bootloaders in the first link. At the time of that thread's opening, cm7 didn't support GB bootloaders. But, if your not sure how your phone will work with a1 click, I would recommend using the ones linked in my sig.
As for how to flash those roms, there are directions in the first post of their respective for flashing.
You can use a stock ROM everyday, most just prefer not to.
Click to expand...
Click to collapse
Which kernel would you recommend I flash before I flash CM7.1?
rcllcr said:
Which kernel would you recommend I flash before I flash CM7.1?
Click to expand...
Click to collapse
No one said you cannot use stock leaked rom as dialy driver, i actually used KH3 for some times and it was very good.
You should flash the kernel according to the rom you have flashed. For example, For KH3, there is a Boog's KH3 kernel with CWM. For all leaked stock rom, there is one click Odins and compatible kernels with CWM injected.
To go to CM7.1, u shud be on stock (Eclair/Froyo or GB) and should have CWM....
rcllcr said:
....Also, I am a bit unclear. After I flash one of the stock ROMs with the bootloaders, how can I then flash a kernel with CWM. Can I do it through ODIN?....
Click to expand...
Click to collapse
I need help too please. I have a Cappy that was originally on eclair 2.1 rooted. froyo 2.2 Kies mini update and rooted but didn't like it's battery use and slow action. I reflashed an Odin 1 click stock 2.1 back, rooted and then did a Gingerbread 2.3.5 I897UCKJ3_withBL_ Odin 1 click flash and am liking that quite a bit more. The only trouble I am having is rooting 2.3.5. I want to do the fugu kernal swap method with Odin3 zimage-root.tar then flash boog_KJ3_kernel3.tar. I can get into DL mode and hit the start button ok.
Here is the question I have. Where in Odin3 v1.83 do you load the kernal path? PIT,BOOTLOADER, PDA, PHONE or CSC. I can't seem to find a comprehensive Odin3 tutorial on my own and I don't want to flash the kernels to the wrong place. I don't think the first 3 options are right based on their names or info I have found. Can't use CWM till I get rooted so Odin or possibly Hiemdall are my only choices. I have Odin3.
HELP and TYIA
Bud
Kernels go in pda
When flashing a single file, unless its a modem or csc file, it will usually go into the pda slot. Modems go into the phone slot. Csc file is a no brainer. I've never saw anything that uses the bootloader slot on a captivate. Pit slot must have a pit file AND repartition must be checked. If you are flashing a kernel to get cwm just to flash a custom ROM, kernel goes into pda slot. If you want to user Odin to flash a modem, it goes into the phone slot. All files flashed in Odin must be a tar or tar.md5 file. Don't change the name of a tar.md5, it can cause a md5 check sum error.
There you go, cliff notes for Odin.
Edit
If I missed something or messed up something, please correct me.
Found Odin3 Answers. Yeah!!!
Studacris,
Thanks for that. Didn't see it before I found the below.
Sorry for the Noob impatience but there is a lot of info that won't show in a search right away. Anyway there is a cool little short video by 4-2ndtwin here on xda with a link here. http://forum.xda-developers.com/showpost.php?p=17788928&postcount=6 The system won't let me post outside links yet.
viny2cool
Hope this helps you.
Bud
I Flashed and unbricked and reflashed and restored so many roms now, i have no idea what bootloader I am on. Is there any way for me to tell either through ADB or on the phone directly?
Pechkin000 said:
I Flashed and unbricked and reflashed and restored so many roms now, i have no idea what bootloader I am on. Is there any way for me to tell either through ADB or on the phone directly?
Click to expand...
Click to collapse
When ur phone boots up and u see the i9000 bootsplash, then u have i9000 Gingerbread bootloaders (we didn't have eclair/froyo i9000 Bls). Also, button combo to get into recovery or download mode is different with the i9000 gb bootloaders.
And if u try and flash an i897 gingerbread rom (and don't see the i9000) but u have a "pixelated" screen, then u have i897 eclair/froyo bootloaders. If ur flash to a gingerbread rom is successful and u see the i897 (att world phone) bootsplash, then u have i897 Gingerbread bootloaders.
Sent by XDA Premium App
Gingerbread it is then, THANKS 4-2ndtwin
Samsung fixed my captivate after the mini USB port broke and I intentionally bricked it with an Odin flash pull because they would have known it was modded/custom rommed. So they fixed it and sent it back and everything works(Thanks Samsung!) but the problem is that they flashed the new 2.3 update which is sooo slow/laggy and featureless compared to Cyanogenmod7 181 nightly that I used to have on my phone. What I want to ask is if I can Odin-one-click back to JF6 stock 2.1 from 2.3(ATT GB bootloaders I think?) and then go about rooting and such from there to get Cyanogenmod back onto my phone.
Thanks,
kind3rgarten.
Yes you can....but that's more work than it's worth.
Just flash a custom kernel with Odin...boot into recovery with button combos and flash whatever ROM you want. easy as pie
studacris said:
Yes you can....but that's more work than it's worth.
Just flash a custom kernel with Odin...boot into recovery with button combos and flash whatever ROM you want. easy as pie
Click to expand...
Click to collapse
Thank you for the answer, but I am more familiar with flashing the rom this way. Are you sure I could do it this way? There wouldn't be a problem with the bootloaders or anything?
this way == odin1click back to JF6 then root then CWM then flash CM7 and gapps
also, would there be any difference in performance/battery life or anything if I were to go your route?
If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking an unnecessary brick risk to downgrade to obsolete bootloaders. Gingerbread boots are backward compatible, so they will work with ANYTHING. so why go back and then if you wanna use a tw gingerbread ROM you'd have to update to the new ones anyway.
your process:
Flash to 2.1
Root
Get cwm
Flash ROM
And that includes bootloaders so if it disconnects you could brick.
best way
Flash kernel to get cwm
Flash ROM
2 steps and no bootloaders so at the very very worst case scenario, you get stuck in a bootloop which is much easier to fix than a hard brick.
That being said you're way will work, so whatever floats your boat...
studacris said:
If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking as brick risk.
Click to expand...
Click to collapse
Plus, if you ever decide to try a Gingerbread ROM, you'll have to reflash the bootloaders again anyway, again risking a brick.
If you really want to go back to 2.1, I would still use a bootloader free package.
^^^Lmfao... I always hit the submit post button before i finish my thought, i just added in that bit you mentioned while you were posting that lol
studacris said:
If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking an unnecessary brick risk to downgrade to obsolete bootloaders. Gingerbread boots are backward compatible, so they will work with ANYTHING. so why go back and then if you wanna use a tw gingerbread ROM you'd have to update to the new ones anyway.
your process:
Flash to 2.1
Root
Get cwm
Flash ROM
And that includes bootloaders so if it disconnects you could brick.
best way
Flash kernel to get cwm
Flash ROM
2 steps and no bootloaders so at the very very worst case scenario, you get stuck in a bootloop which is much easier to fix than a hard brick.
That being said you're way will work, so whatever floats your boat...
Click to expand...
Click to collapse
So would I just flash a kernel that already has root/CWM? Then flash CM7/gapps on top of that?
I would post a link, but I don't post here too often.
Like this?
androidforums[DOT]com/captivate-all-things-root/483646-guide-root-official-2-3-5-guide.html
apbthe3 said:
Plus, if you ever decide to try a Gingerbread ROM, you'll have to reflash the bootloaders again anyway, again risking a brick.
If you really want to go back to 2.1, I would still use a bootloader free package.
Click to expand...
Click to collapse
Yeah, I see what you mean, thanks. Can bootloaders effect battery life, because I remember that I didn't get the best battery life in CM7?
Cm7 is aosp based it doesn't have all the closed source hardware drivers of touch wiz, so the battery life will be worse.
As for the kernel, any will work. It's not a kernel you're going to be running it's just a transitory kernel used only for it's recovery. Any ROM you flash will include a compatible kernel and be rooted.
Hold on I'll find you a kk4 kernel so it won't bootloop even though you don't need it to boot all the way anyway... Brb
Edit: kk4 corn kernel grab the Odin flashable version of corse.
studacris said:
Cm7 is aosp based it doesn't have all the closed source hardware drivers of touch wiz, so the battery life will be worse.
As for the kernel, any will work. It's not a kernel you're going to be running it's just a transitory kernel used only for it's recovery. Any ROM you flash will include a compatible kernel and be rooted.
Hold on I'll find you a kk4 kernel so it won't bootloop even though you don't need it to boot all the way anyway... Brb
Edit: kk4 corn kernel grab the Odin flashable version of corse.
Click to expand...
Click to collapse
Thanks for all the help. So I just flash this and then get into CWM and flash whatever rom I want to?
Sweet!
You got it chief
kind3rgarten said:
Thanks for all the help. So I just flash this and then get into CWM and flash whatever rom I want to?
Sweet!
Click to expand...
Click to collapse
Correct. If you remember to put CM7 and GAPPS on the SD card before you flash it, you won't even have to boot it. Just flash it, three finger salute into recovery, and flash cm7.
studacris said:
You got it chief
Click to expand...
Click to collapse
Wow, I really expected someone to just call me a noob or tell me to read the FAQ or something. Thanks a lot, both of you.
I downloaded the corn kernel, but I've never really flashed a kernel through odin before, always just the method I had stated, does it go in PDA?
kind3rgarten said:
Wow, I really expected someone to just call me a noob or tell me to read the FAQ or something. Thanks a lot, both of you.
I downloaded the corn kernel, but I've never really flashed a kernel through odin before, always just the method I had stated, does it go in PDA?
Click to expand...
Click to collapse
You got it, just leave the others blank. You shouldn't have to play with the check boxes.
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app