[Q] Samsung fixed my captivate but now... - Captivate Q&A, Help & Troubleshooting

Samsung fixed my captivate after the mini USB port broke and I intentionally bricked it with an Odin flash pull because they would have known it was modded/custom rommed. So they fixed it and sent it back and everything works(Thanks Samsung!) but the problem is that they flashed the new 2.3 update which is sooo slow/laggy and featureless compared to Cyanogenmod7 181 nightly that I used to have on my phone. What I want to ask is if I can Odin-one-click back to JF6 stock 2.1 from 2.3(ATT GB bootloaders I think?) and then go about rooting and such from there to get Cyanogenmod back onto my phone.
Thanks,
kind3rgarten.

Yes you can....but that's more work than it's worth.
Just flash a custom kernel with Odin...boot into recovery with button combos and flash whatever ROM you want. easy as pie

studacris said:
Yes you can....but that's more work than it's worth.
Just flash a custom kernel with Odin...boot into recovery with button combos and flash whatever ROM you want. easy as pie
Click to expand...
Click to collapse
Thank you for the answer, but I am more familiar with flashing the rom this way. Are you sure I could do it this way? There wouldn't be a problem with the bootloaders or anything?
this way == odin1click back to JF6 then root then CWM then flash CM7 and gapps
also, would there be any difference in performance/battery life or anything if I were to go your route?

If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking an unnecessary brick risk to downgrade to obsolete bootloaders. Gingerbread boots are backward compatible, so they will work with ANYTHING. so why go back and then if you wanna use a tw gingerbread ROM you'd have to update to the new ones anyway.
your process:
Flash to 2.1
Root
Get cwm
Flash ROM
And that includes bootloaders so if it disconnects you could brick.
best way
Flash kernel to get cwm
Flash ROM
2 steps and no bootloaders so at the very very worst case scenario, you get stuck in a bootloop which is much easier to fix than a hard brick.
That being said you're way will work, so whatever floats your boat...

studacris said:
If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking as brick risk.
Click to expand...
Click to collapse
Plus, if you ever decide to try a Gingerbread ROM, you'll have to reflash the bootloaders again anyway, again risking a brick.
If you really want to go back to 2.1, I would still use a bootloader free package.

^^^Lmfao... I always hit the submit post button before i finish my thought, i just added in that bit you mentioned while you were posting that lol

studacris said:
If you used it before it's still ok, just like i said that's a much longer process than what's needed, and by flashing bootloaders when you don't need you're taking an unnecessary brick risk to downgrade to obsolete bootloaders. Gingerbread boots are backward compatible, so they will work with ANYTHING. so why go back and then if you wanna use a tw gingerbread ROM you'd have to update to the new ones anyway.
your process:
Flash to 2.1
Root
Get cwm
Flash ROM
And that includes bootloaders so if it disconnects you could brick.
best way
Flash kernel to get cwm
Flash ROM
2 steps and no bootloaders so at the very very worst case scenario, you get stuck in a bootloop which is much easier to fix than a hard brick.
That being said you're way will work, so whatever floats your boat...
Click to expand...
Click to collapse
So would I just flash a kernel that already has root/CWM? Then flash CM7/gapps on top of that?
I would post a link, but I don't post here too often.
Like this?
androidforums[DOT]com/captivate-all-things-root/483646-guide-root-official-2-3-5-guide.html

apbthe3 said:
Plus, if you ever decide to try a Gingerbread ROM, you'll have to reflash the bootloaders again anyway, again risking a brick.
If you really want to go back to 2.1, I would still use a bootloader free package.
Click to expand...
Click to collapse
Yeah, I see what you mean, thanks. Can bootloaders effect battery life, because I remember that I didn't get the best battery life in CM7?

Cm7 is aosp based it doesn't have all the closed source hardware drivers of touch wiz, so the battery life will be worse.
As for the kernel, any will work. It's not a kernel you're going to be running it's just a transitory kernel used only for it's recovery. Any ROM you flash will include a compatible kernel and be rooted.
Hold on I'll find you a kk4 kernel so it won't bootloop even though you don't need it to boot all the way anyway... Brb
Edit: kk4 corn kernel grab the Odin flashable version of corse.

studacris said:
Cm7 is aosp based it doesn't have all the closed source hardware drivers of touch wiz, so the battery life will be worse.
As for the kernel, any will work. It's not a kernel you're going to be running it's just a transitory kernel used only for it's recovery. Any ROM you flash will include a compatible kernel and be rooted.
Hold on I'll find you a kk4 kernel so it won't bootloop even though you don't need it to boot all the way anyway... Brb
Edit: kk4 corn kernel grab the Odin flashable version of corse.
Click to expand...
Click to collapse
Thanks for all the help. So I just flash this and then get into CWM and flash whatever rom I want to?
Sweet!

You got it chief

kind3rgarten said:
Thanks for all the help. So I just flash this and then get into CWM and flash whatever rom I want to?
Sweet!
Click to expand...
Click to collapse
Correct. If you remember to put CM7 and GAPPS on the SD card before you flash it, you won't even have to boot it. Just flash it, three finger salute into recovery, and flash cm7.

studacris said:
You got it chief
Click to expand...
Click to collapse
Wow, I really expected someone to just call me a noob or tell me to read the FAQ or something. Thanks a lot, both of you.
I downloaded the corn kernel, but I've never really flashed a kernel through odin before, always just the method I had stated, does it go in PDA?

kind3rgarten said:
Wow, I really expected someone to just call me a noob or tell me to read the FAQ or something. Thanks a lot, both of you.
I downloaded the corn kernel, but I've never really flashed a kernel through odin before, always just the method I had stated, does it go in PDA?
Click to expand...
Click to collapse
You got it, just leave the others blank. You shouldn't have to play with the check boxes.

Related

3 button fix?

I'm new to the Captivate. Coming from Xperia x10, this phone is alien to me in regards to installing custom roms. I've been reading and apparently I need the 3 button fix because I can't get into Recovery mode without Rom manager. All the download links I've found are broken. Where can I get it? Is this even necessary? Has there been a more recent fix?
use adb and buy or make a usb jig for your phone to have incase. Its best to just avoid using the 3-button fix as it has broken a lot of cappys.
I will say flash a GB Rom for that u will need GB bootlaoders when u flash the GB Bootloaders it will fix ur 3 button combo, Gor flashing a GB rom you need the DL mode that can be achieved though ADB or a Jig.
But remember do not flash the 3 button fix over it.
xArtanis said:
I'm new to the Captivate. Coming from Xperia x10, this phone is alien to me in regards to installing custom roms. I've been reading and apparently I need the 3 button fix because I can't get into Recovery mode without Rom manager. All the download links I've found are broken. Where can I get it? Is this even necessary? Has there been a more recent fix?
Click to expand...
Click to collapse
Read well on each and every rom you want to use. IF you are inclined on flashing a GB rom with bootloaders I recommend this one. Run it as Admin put your phone in download mode. click start and you should be on 2.3.3 with bootloaders and 3button fix. Flashing bootloaders carries risk on hard bricking, and DO NOT flash the "3 button fix" if you are on GB bootloaders.
Just don't flash the 3 button lol its evol
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
xijar said:
Just don't flash the 3 button lol its evol
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
Click to expand...
Click to collapse
Its not evil its just outdated. It was used pre GB bootloaders. Its ment to fix the 3 button issue by JUST flashing a secondary bootloader. Now that we have GB bootloaders people think they need the "fix" and end up mismatching a GB primary bootloader and a eclair/froyo secondary bootloader creating a very expensive paper weight.
Meh can still jtag. Not too expensive and gets the phone going again. I understand why the fix breaks phones I just think its best to stay away from it since adb + jig work without it.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
xijar said:
Meh can still jtag. Not too expensive and gets the phone going again. I understand why the fix breaks phones I just think its best to stay away from it since adb + jig work without it.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
Click to expand...
Click to collapse
Ive read issues with ADB and CM7 based roms not working properly though. But I dislike AOSP roms on captivate, haven't had great experiences with them. But thats just personal observation. Although I quoted you my explanation was directed at OP sorry if that was confusing, just noticed it xD
xijar said:
Meh can still jtag. Not too expensive and gets the phone going again. I understand why the fix breaks phones I just think its best to stay away from it since adb + jig work without it.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
Click to expand...
Click to collapse
Adb doesn't work in all states such as a soft brick when you would need it.
And a jig only boots to download mode, meaning something that could have been fixed by a cwm flash is now a flash to stock using odin. And THEN the custom rom you could've flashed if your combos worked...
The aio toolbox has the 3 button fix, if you don't plan on flashing gingerbread any time soon then use that.
JUST DO NOT USE IT ONCE YOU'VE MADE THE JUMP TO GINGERBREAD. Unless first using odin one click jf6, that replaces both bootloaders with eclair ones, first.
Is risky applied this fix? If i have a jig, can i avoid try this fix rigth?
Darkuso said:
Is risky applied this fix? If i have a jig, can i avoid try this fix rigth?
Click to expand...
Click to collapse
Keel in mind you wont be able to reach recovery, jig only gets you in download mode. As ti risk flashy any type of bootloaders carries some risk for a hard brick. Id recommebd GB bootloaders and just forget about bootloaders. Just my 2 cents. But like always read read read =)
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
studacris said:
Adb doesn't work in all states such as a soft brick when you would need it.
And a jig only boots to download mode, meaning something that could have been fixed by a cwm flash is now a flash to stock using odin. And THEN the custom rom you could've flashed if your combos worked...
The aio toolbox has the 3 button fix, if you don't plan on flashing gingerbread any time soon then use that.
JUST DO NOT USE IT ONCE YOU'VE MADE THE JUMP TO GINGERBREAD. Unless first using odin one click jf6, that replaces both bootloaders with eclair ones, first.
Click to expand...
Click to collapse
That's because THOSE gingerbread bootloaders are not for our phones. Tell whoever your ROM developer is to change his methods. He's causing bricks.
AdamOutler said:
That's because THOSE gingerbread bootloaders are not for our phones. Tell whoever your ROM developer is to change his methods. He's causing bricks.
Click to expand...
Click to collapse
So it won't brick with kf1 pbl mixed with a froyo (kb1) sbl?
studacris said:
So it won't brick with kf1 pbl mixed with a froyo (kb1) sbl?
Click to expand...
Click to collapse
Never mix bootloaders and never run bootloaders which are not for your phone. That's how you end up with a brick.
AdamOutler said:
Never mix bootloaders and never run bootloaders which are not for your phone. That's how you end up with a brick.
Click to expand...
Click to collapse
Good to know this, question: that is why u and ur team made andromeda3 in froyo? is safer stay with those bootloaders?
Andromeda is based off of the armani source code, which a gingerbread source has not been released for. So they haven't updated it.
But yes it is safer to never flash bootloaders as that is the only time you risk a brick. So if you never touch them you have a very tiny chance of ever bricking as it would be a hardware malfunction that would not allow you to flash out of a "soft brick" Such as a broken usb port...
Darkuso said:
Good to know this, question: that is why u and ur team made andromeda3 in froyo? is safer stay with those bootloaders?
Click to expand...
Click to collapse
Andromeda (in all its renditions up to and including 3) were based on Froyo because GB wasnt even a spec on the map for Galaxy S devices when it began life.
If we see some Armani source drop, we will work on a GB version, but we decided to stick true to the game and only work on armani source.
some of us have other projects we work on outside of a teamkomin build.
Pirateghost said:
Andromeda (in all its renditions up to and including 3) were based on Froyo because GB wasnt even a spec on the map for Galaxy S devices when it began life.
If we see some Armani source drop, we will work on a GB version, but we decided to stick true to the game and only work on armani source.
some of us have other projects we work on outside of a teamkomin build.
Click to expand...
Click to collapse
Right. Like my heimdall one-click project is designed to take the guesswork out of flashing for noobs. If you stick with one-clicks for your device, then you are using proper firmware which has been tested or at least pre-paired by someone for your device. It's not a Team project.

[Q] Softbrick Returning to Stock, newer build number

Hey guys,
So I recently just got my USB Jig to get my phone out of softbrick (after realizing newer build models cannot use Odin One-click..)
I have a 1107 build, so what can I do to revert it back to stock? Odin won't work for me, and I just want to ultimately flash a custom ROM on it. Should I flash GB bootloaders first or what?
Thank you.
you can use anything except one click for Jf6 by design gears...u can flash GB bootloader...no problems...
Which stock are attempting to return to?
Anything really. I was on ECLAIR before. (On a Rogers phone)
I just want to get out of the soft brick (cellphone--!--computer) to flash MIUI or CM7.
I bricked it by trying to flash the AT&T bootloaders.
Then look through development and pick a stock package. Flash that, then try to apply whatever custom ROM you want. But, if you want GB bootloaders, flash those before flashing MIUI/cm7.
Is there anything I can use to flash stock packages without using Odin? I have a new build number and Oneclick will only brick it again.
How do you feel about Heimdall?
Thank you for your quick responses, I really appreciate it.
I will use this guide to try Heimdall: http://forum.xda-developers.com/showthread.php?t=1113195
Would you have a suggestion on what particular stock ROM I should revert back to? I don't really care for any particular bootloaders at this point in time.
icedd said:
Thank you for your quick responses, I really appreciate it.
I will use this guide to try Heimdall: http://forum.xda-developers.com/showthread.php?t=1113195
Would you have a suggestion on what particular stock ROM I should revert back to? I don't really care for any particular bootloaders at this point in time.
Click to expand...
Click to collapse
depends what kind of custom rom u want to flash later...
If u want to flash CM7/MIUI, then flash to any stock eclair/froyo or Att GB bootloader...
if u want to flash ATT GB roms, then pick any stock GB bootloader from the sticky thread in development section..I personally used Adam outler's one click heimdell stock to KH3
if u want to flash i9000 based GB roms, then flash i9000 GB bootloaders....
Can I use this: http://forum.xda-developers.com/showthread.php?t=1266172 to revert back to stock FROYO?
Actually I should try using Heimdall's One-Click Unbrick first..
edit: Heimdall's One-Click does not recognize my phone in Download mode (after plugging in Jig and then plugging it into computer) or in soft-brick screen.
Will proceed to use Heimdall's One-Click Total Stock
edit: seems like Heimdall's One-Click Total Stock doesn't work either. Computer cannot recognize phone. Help please?
edit: Did Total Stock again on a Windows computer, successful flashing!
Heimdall uses different drivers did you install those?
Sent from my I897 using XDA App
Yup it is all good now. I am now on FROYO now. Going to proceed to try and flash CM7 on it for the first time. Thanks guys!

[Q] Need help to clear some questions

Hi guys, I'm new here and have been scouring the forums on how to do things but I keep getting caught with uncertainties.
I have an i896 Samsung Galaxy S Captivate with a Rogers 2.3.3 Gingerbread installed.
I have rooted it with no issues and its also unlocked.
What I want to do:
1. CyanogenMod 7
2. Overclock the CPU
But what I don't know is...
1. Since i'm running a Rogers ROM, do I have to flash to an AT&T ROM then to any custom ROM?
2. I read the instructions on how to update to the CM7 ROM but every instruction I read says I must have Froyo/Eclair to goto CM7. So do I downgrade and if so, how can I do that? I tried and what ends up happening is the phone's reception bars have an X and data doesn't work either. In the phone About properties, states that the baseband is "unknown". I suspect I need something more than a stock Rogers ROM without bootloaders. I couldn't find a 2.1 or 2.2 stock Rogers ROM with bootloders.
3. For overclocking, I installed Voltage Control and Control Freak and neither let me overclock, the max CPU is 1000Mhz. I assume I need a custom Kernal to do this but haven't been able to find how to do this during the CM7 upgrade.
I just need someone to point me in the right direction on what order to do all this and whether me having a Rogers stock 2.3.3 ROM causes an issue. I've done a lot of reading on these forums so its not like I just signed up and wanted to know the easy way out. I simply want the proper way to do things so I don't repeat the same mistakes many people may have done in the past.
I have used Odin, Heimdall, Odin One Click, Super One Click for rooting.
Hopefully someone can guide me in the right direction and help me achieve these goals!
You dont need to go back to Froyo, as GB bootloader is compatible. but you need CWM to flash CM7. you can use Rom Manager app to flash the CWM.
Just download CM7 zip file, wipe data, system and cache and install it using CWM. It comes with custom kernel so you can overclock it using those apps you mentioned. You can also flash Glitch kernel....
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
BadBoiSinZ said:
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
Click to expand...
Click to collapse
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Wdustin1 said:
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Click to expand...
Click to collapse
Ya that's what I don't know either...I read tons of threads where people with i896 Rogers roms tried to flash with AT&T based roms or i897 roms and either bricked their phones or made a mess that took much more to get them back to stock...problem is the people that have i896 roms here I can't contact until I hit 10 posts...so I'm here stuck until then...
Just flash a custom I897 kernel with cwm, once complete, yank battery, replace and button combo boot into recovery and flash the ROM. Whichever kernel you choose doesn't really matter as zip will flash a compatible kernel, the I896 and I897 are identical other than cosmetic branding.
I was on stock rogers 2.3.3.
Installed Sumari kernel. Booted into the sumari recovery, installed CM7 zip, the phone rebooted into cwm recovery, and continued installing.
It worked pretty smoothly.
okay so i flashed my phone with a stock 2.3.5 rom with CWM, but how do I update to CM7? When i boot into recovery the only option I have is reinstall package. Do i rename the CM7 zip file to update.zip and that should work? I'm so lost...
In CWM recovery you need to choose install zip from sdcard, make sure you are in fact in cwm recovery
Before you do that....you need to flash a kernel with Odin that has cwm in it...
Woo! that worked like a charm haha yea baby yea!! Thank you soo much!! i was so scared to flash my cappy going from Rogers to AT&T that it would brick the phone. Got CM7 with Glitch Kernel and overclocked to 1.4 sawweeeeet!!
Now time to fiddle around and customize!
Thanks everyone!!

Kernel flashing problem.

Okay, just got a captivate. I rooted it no problem. I couldn't flash cwm to flash cm7 without a custom kernel that has cwm on it. So I got odin3 1.7 got my phone into download mode and flashed first the cornkernel, once the phone booted up it had a crazy screen with all kinds of colors. Okay, wrong kernel, then I did boog Kernel, same thing. Can someone point me to a kernel for the stock 2.2 rom that has cwm so I can get cm7? Sorry to post, but there is so much info and I've already spent hours trying to find it.
Found one here. So, anyone coming from stock and you want CWM, use the kernel. http://forum.xda-developers.com/showthread.php?t=893880 Boy I tell you, took forever to find.
actorman46 said:
Okay, just got a captivate. I rooted it no problem. I couldn't flash cwm to flash cm7 without a custom kernel that has cwm on it. So I got odin3 1.7 got my phone into download mode and flashed first the cornkernel, once the phone booted up it had a crazy screen with all kinds of colors. Okay, wrong kernel, then I did boog Kernel, same thing. Can someone point me to a kernel for the stock 2.2 rom that has cwm so I can get cm7? Sorry to post, but there is so much info and I've already spent hours trying to find it.
Click to expand...
Click to collapse
You need GB bootloaders to use a GB kernel I believe.
RTFM
prbassplayer said:
You need GB bootloaders to use a GB kernel I believe.
Click to expand...
Click to collapse
That is correct. Corn is based on the KK4 source (Gingerbread). You must have the gingerbread bootloaders to use Corn. You (OP) might want to double check the directions for CM7 before you attempt any more flashing. Reading the instructions first can help prevent you from turning your device into an expensive paperweight. The instructions include how to go from 2.2 to CM7. They are HERE
Once I got the right kernel I was able to flash the newest nightly with no trouble. I'll have to start with the wikki next time, thanks for the link. It just turned into a mess going through these forums and Google, because this devices has been out a while and there were so many ways to do things, and a lot of them no longer supported.
I always like to include a link rather than just say go search. I've tried searching for certain keywords before and you get just about every thread in the dev section returned.
I found that issue moving to a ROM the other night. The developer suggested flashing to KJ3 stock then flashing Boog to get CWM. I figured I would just flash KK4 stock, then flash Corn, get CWM with that, and then flash the ROM (which included corn anyway). There are so many ways to do most things on the Captivate these days.

[Q] Captivate 2.2 Froyo to X-Bean

Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app

Categories

Resources