[Q] My w8 is not starting only showing sony ericsson startup screen. - XPERIA X8 Q&A, Help & Troubleshooting

I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
You will need a computer,download flash tool,download official w8 rom(original)
You can Thank me Now .

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
do u see sonyericsson white logo on startup?
try using SEUS http://sony-ericsson-update-service.en.uptodown.com/
or try this
http://forum.xda-developers.com/showthread.php?t=1011071
gudluck

dont worry. everything will be alright. This is a chance for you to gain knowledges.
No fail no success.

Bricked phone
I also face the same problem when i use Xperia X8. Here is the solution for to recover it.
Please search for Xperia x8/w8 Update Service setup in google and install the software in your PC then do the below steps.
1) switch off your phone
2) Press the back button continuously and connect the USB cable from your system to phone.
3) Then run the updated service. It will take nearly 30 minutes to complete the software updated process.

Bricked phone?
I had the same problems the first time, i even had to take it back to where I purchased it since it had warranty, after they handed the phone again I stayed with the feeling that there was something I had to try I did it again and it stayed on the sonyericsson logo and didn`t enter the Xrecovery by pressing back button guess what I tried pressin the other buttons the menu and the home button and it enter the Xrecovery from there try doing a restore if you backedup your info if not you have to use flashtool and flash the rom
try going to Xperiax8(todo para este movil) and search Reparar Sony Ericcson Xperia X8 despues de Briqueo (repair phone after brick)
Recommended if you download a clean stock rom I used 1.6 donut and then installed the stock baseband 06 am pretty sure that flashtool has it if not follow this
download the stock firmware to your device and you are back in business

you may use flashtool to flash stock fw.now cwm may not works as it was on fw,

but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast

rishinhr said:
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
Click to expand...
Click to collapse
try flashtool then

thanks i am out of danger............finaly

I Think My phone is HARD BRICKED help needed pls
rishinhr said:
thanks i am out of danger............finaly
Click to expand...
Click to collapse
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...

arunvlnd8 said:
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
Click to expand...
Click to collapse
Restore with PCC
Sent from my E15i using xda premium

Or dl stock rom and flashtool. Flash stock using flashtool.
Sent from my rooted tomato using xda app

plz help me
i have same problem what can i do to backup rom ?

Related

X8 not booting

Hello,
I just broke my SE X8 after attempt of installing MiniCM7.
Basically, after removing battery to make my phone shut down, then starting it, all I get is "Sony Erricson" logo and nothing further, everything stops at "Sony Erricson" logo, I tried pressing "Back" to enter xRecovery and do system restore to fix everything, but I can't even get into xRecovery.
Please assist!
Did you ...
a) ... even read the 1st post in the MiniCM7 dev thread?
b) ... unlock your bootloader (WARNING! You may hard brick your phone when it's in a certain manufacturing date range) and install the required kernel?
From the symptoms you describe it doesn't seem that way.
Also (it's just being posted several hundred times) ...
XRECOVERY DOES NOT WORK ON CUSTOM KERNELS!
EDIT: I already posted how to resolve the problem HERE
Options for fixing?
toksiks said:
Options for fixing?
Click to expand...
Click to collapse
See the edit in the 2nd post.
Thanks for answer!
How do I enable USB connetion if I can't get till it?
You don't need to enable "USB-Debugging"
Depending on which way you choose you ...
EDIT
a) ... need to unlock the boot loader through the required tools with the phone being in Flash-Mode
b) ... need to Flash the Kernel through Flashtool with the phone being in Flash-Mode
c) ... need to restore Stock 2.1.1 through Flashtool with the phone being in Flash-Mode
"Flash Mode" means:
- Turn the phone OFF!
- DISCONNECT the USB cable FROM your computer
- Launch Flashtool
- Select the file you want to flash
- Once Flashtool requests you to you press the Back button and KEEP IT PRESSED while you plug the USB cable into the computer.
This has nothing to do with "USB-Debugging".
Perfect!
Managed everything trough
"c) ... need to restore Stock 2.1.1 through Flashtool with the phone being in Flash-Mode"
Thank you very much!
I'm stuck at SE logo after doing a restore of gingerdx backup...led isnt working when connected to pc..is this fixable?
bore1989 said:
I'm stuck at SE logo after doing a restore of gingerdx backup...led isnt working when connected to pc..is this fixable?
Click to expand...
Click to collapse
Yes. Use pcc or flash back to stock using flashtool. Lots of threads here to help you out. Search.
Sent from my rooted tomato using xda app
you need to flash kernal and then flash rom.i suggest you download sony ericsson x8 stock kernal and stock rom first.then download sony ericsson flashing tool.open flash tool directory and open firmwares folder and paste stock kernal and stock firmware(.ftf).now open flashtool and select flash and select kernal,now a dialog will appear saying to press back button of ur xd,press back button and connect ur usb to phone(dont stop pressing back unless percentage is shown),done.now do it again with firmware

[Q] Unbricking problem

So I was stupid enough to reinstall busybox and bricked my xrecovery and ROM (FroyoBread v23b) but the problem is i can't unbrick it. Tried PCC which just says "there is no new software yet", SEUS just freezes on phone check and FlashTool seems to do it's job but after flashing my phone is still stuck on the Sony Ericsson logo. I'm currently out of ideas so any help would be much appreciated.
hey
i bricked my phone yesterday, this is how i unbricked it:
PCC>support zone>and pick the first one.
when it says no phone is connected press ''repair phone''
and follow the instructions.
leave thanks if helped
Milito2 said:
i bricked my phone yesterday, this is how i unbricked it:
PCC>support zone>and pick the first one.
when it says no phone is connected press ''repair phone''
and follow the instructions.
leave thanks if helped
Click to expand...
Click to collapse
Yeah i tried that but it said "no new software for your phone" or something. I got a 1.6 ftf for FlashTool and that worked for me. Thanks anyway
Cyanogenmod 9 Bricked my X8
Today i flashed CM9 through xRecovery ..& the installation was quite slick.!! but after i rebooted it ..the SE logo come n then the GOOGLE ICS boot animation starts ..i get stuck agter 2 03 animation..always....moreover i can't get into Xrecovery now by pressing back Button...plzz help me....ultimately my phone is brickedd...
Flash a stock eclair rom.
You can find it here : http://www.mediafire.com/?8bce4dx39e4vp
You'll find too a .txt wich explain step by step how to manage.
techshaQ said:
Today i flashed CM9 through xRecovery ..& the installation was quite slick.!! but after i rebooted it ..the SE logo come n then the GOOGLE ICS boot animation starts ..i get stuck agter 2 03 animation..always....moreover i can't get into Xrecovery now by pressing back Button...plzz help me....ultimately my phone is brickedd...
Click to expand...
Click to collapse
use SEUS (sony ericsson update service) for repair
Thanks man
Using pcc helped me unbrick my phone.
Now I'm trying to brick it again

Turning on the phone with "update" SEUS or flashing original ROM

Hello I have a problem ... I uploaded the ROM from XDA xRecovery over. Installation was fine. But after installation, you get to the menu moves xRecovery just boot the Sony Ericsson disappears and then appears on screen boot ROM installed, and there it freezes and I can wait as long as I want. When I want to fix it via SEUS phone by itself turns the same even FlashTools. I have Xperia X8. Please advise .. thanks
Wipe data, cache and try reinstall it!
.
damir87 said:
Wipe data, cache and try reinstall it!
Click to expand...
Click to collapse
How? One could get into the menu xRecover: (... sorry my bad english
I guess you are upgrading from stock 2.1 and that you know get into recovery by pressing back button few times when SE logo shows on boot! If you can't enter recovery I'm afraid that your rom is not installed properly!
.
damir87 said:
I guess you are upgrading from stock 2.1 and that you know get into recovery by pressing back button few times when SE logo shows on boot! If you can't enter recovery I'm afraid that your rom is not installed properly!
Click to expand...
Click to collapse
is not correctly installed. So is any solution? If it does not work xRecovery menu .. Some "hard delete"?
Seus, pcc, flashtool try something its just soft brick and you can repair by yourself!
.
damir87 said:
Seus, pcc, flashtool try something its just soft brick and you can repair by yourself!
Click to expand...
Click to collapse
When I connect my phone off the SEUS. So self starts. Also, it makes even the flashtools
Try reinstall Gordons gate! Restart computer connect phone while you holding back button and flash stock rom! That's procedure for flashtool! If don't work try PC Companion and repair button
.
Resolved. Ultimately helped PC Companion

[Q] stuck on SE log after rooting new rom and flashing new rom

stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA
Use the search button buddy, please!
Btw, what costum rom do you trying to install? Are you on stock kernel?
Sent from my X8 using xda premium
mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
here check this http://forum.xda-developers.com/showthread.php?t=1011071
always do a fullwipe from the recovery menu before flashing a custom rom
mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
u got two options :-
1) flash .ftf files using flashtool!
2) use wotan client !
if u want details on this... m ready to help !
anashiva said:
You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA
Click to expand...
Click to collapse
thanks alot.. i done that and its working great now ... i was tired so i flashed x10mini rom and not the x8 lol my bad ...
thanks everyone for your fast support . you all are the best

[Q] How to Rectify Bootloop Problem using Flash Tool

I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
Did you unlocked your bootloader ? And which CM rom are you using exactly ?
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
s3nbon5akura said:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
Click to expand...
Click to collapse
You should flash using flash tool to solve it
praveenkumarkm8 said:
You should flash using flash tool to solve it
Click to expand...
Click to collapse
how do i do that? sorry about this
s3nbon5akura said:
how do i do that? sorry about this
Click to expand...
Click to collapse
Here read these..
http://forum.xda-developers.com/showthread.php?t=1755215
Hit thanx if it helped..
Sent from my LEWA using xda premium
And here's the .ftf file of stock rom...
Sent by the walking walkman..
BlackRabbit1703 said:
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
Click to expand...
Click to collapse
Thanks for ur information, I tried all those steps mentioned above. Now my phone is working fine. Now I installed GingerDX 028b

Categories

Resources