Database Develop

[Q] My w8 is not starting only showing sony ericsson startup screen.

I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
You will need a computer,download flash tool,download official w8 rom(original)
You can Thank me Now .

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
do u see sonyericsson white logo on startup?
try using SEUS http://sony-ericsson-update-service.en.uptodown.com/
or try this
http://forum.xda-developers.com/showthread.php?t=1011071
gudluck

dont worry. everything will be alright. This is a chance for you to gain knowledges.
No fail no success.

Bricked phone
I also face the same problem when i use Xperia X8. Here is the solution for to recover it.
Please search for Xperia x8/w8 Update Service setup in google and install the software in your PC then do the below steps.
1) switch off your phone
2) Press the back button continuously and connect the USB cable from your system to phone.
3) Then run the updated service. It will take nearly 30 minutes to complete the software updated process.

Bricked phone?
I had the same problems the first time, i even had to take it back to where I purchased it since it had warranty, after they handed the phone again I stayed with the feeling that there was something I had to try I did it again and it stayed on the sonyericsson logo and didn`t enter the Xrecovery by pressing back button guess what I tried pressin the other buttons the menu and the home button and it enter the Xrecovery from there try doing a restore if you backedup your info if not you have to use flashtool and flash the rom
try going to Xperiax8(todo para este movil) and search Reparar Sony Ericcson Xperia X8 despues de Briqueo (repair phone after brick)
Recommended if you download a clean stock rom I used 1.6 donut and then installed the stock baseband 06 am pretty sure that flashtool has it if not follow this
download the stock firmware to your device and you are back in business

you may use flashtool to flash stock fw.now cwm may not works as it was on fw,

but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast

rishinhr said:
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
Click to expand...
Click to collapse
try flashtool then

thanks i am out of danger............finaly

I Think My phone is HARD BRICKED help needed pls
rishinhr said:
thanks i am out of danger............finaly
Click to expand...
Click to collapse
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...

arunvlnd8 said:
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
Click to expand...
Click to collapse
Restore with PCC
Sent from my E15i using xda premium

Or dl stock rom and flashtool. Flash stock using flashtool.
Sent from my rooted tomato using xda app

plz help me
i have same problem what can i do to backup rom ?

[Q] stuck on SE log after rooting new rom and flashing new rom

stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks

You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA

Use the search button buddy, please!
Btw, what costum rom do you trying to install? Are you on stock kernel?
Sent from my X8 using xda premium

mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
here check this http://forum.xda-developers.com/showthread.php?t=1011071
always do a fullwipe from the recovery menu before flashing a custom rom

mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
u got two options :-
1) flash .ftf files using flashtool!
2) use wotan client !
if u want details on this... m ready to help !

anashiva said:
You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA
Click to expand...
Click to collapse
thanks alot.. i done that and its working great now ... i was tired so i flashed x10mini rom and not the x8 lol my bad ...
thanks everyone for your fast support . you all are the best

[Q] Sony Ericsson text won't disappear

hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!

Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
repair it with PCC

Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool

BlackRabbit1703 said:
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
Click to expand...
Click to collapse
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8

Xaverek said:
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Click to expand...
Click to collapse
download
driver x8
gordon gates
install driver from C:\Flashtool\Driver

thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all

Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
It's just soft brick so you should have flashtool and some ftf files for your device maybe stock firmware and baseband update so you can unbrick your soft bricked device for any time. Just enter the flash mode and flash it! That's it! Just some advice for you
PS. Don't say thanks. Click "Thanks"

Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
well done dude! :good:

HAlf dead??LOL phone don't boot after custom rom installed

Hi there all,
I think my phone is half dead??
i installed KA06 Xperia Z Revolution custom rom before( it ran great ) and today when i downloaded
this rom ---> [ROM][CM10.1][AOKP][PA with HALO & PIE][OVERCLOCK 1944 MHz] PAC v23.0.0 - 0611
1) I put the zip into sd card then use the CWM v6.X to install from sdcard
2) booted the phone and it does show up PAC start up screen, i notice the CWM has changed??
3) I read the rom has a boot problem which cause the screen to black out for a moment but so far i've been sitting here waiting for it to boot for hours ( i have reset it time to time and went into CWM and clear devik caache, cache etc)
SO now i have my phone stuck on the black screen, can anyone please help me?? i need some step to step guidance as my pc can't access my SD card now i can't put my KA06 back on to reflash.
please don't tell me i bricked my phone =[
many thanks

No sir you didnt brick your phone.....
Just reflash your stock sony rom.... And then flash the paranoid android.....
Had the same problem with me too.....
Reflash the stock sony rom via flash mode.... On flashtool.... Boot it up.... Then once it boots up.... Poweroff and flash the paranoid android kernel....
To enter flashmode poweroff the phone.... Press the volume down key and then attach the usb cable
Sent from my C6603 using xda premium

rohit25 said:
No sir you didnt brick your phone.....
Just reflash your stock sony rom.... And then flash the paranoid android.....
Had the same problem with me too.....
Reflash the stock sony rom via flash mode.... On flashtool.... Boot it up.... Then once it boots up.... Poweroff and flash the paranoid android kernel....
To enter flashmode poweroff the phone.... Press the volume down key and then attach the usb cable
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thank you, you make it all sound too easy!!
I just foudn out stock rom is 700mb , can i not just flash the KA06 rom with flash tool?

yoro35i said:
Thank you, you make it all sound too easy!!
I just foudn out stock rom is 700mb , can i not just flash the KA06 rom with flash tool?
Click to expand...
Click to collapse
No. And it is easy, so long as you can read.

XperienceD said:
No. And it is easy, so long as you can read.
Click to expand...
Click to collapse
Hi, i got my phone working now, thank you very much.
I am now clueless on how to flash the kernal?
I unzip the pac rom, extracted the boot.img ,on Flashtool i selected fastboot and 'select kernal to flash'' but i am receiving
''ERROR - This action can only be done in fastboot mode''
please tell me what am i doing wrong?
Do i need to re-do the fastboot thing from andriod SDK? DO i try to flash from Terminal( i'm using mac)?
cheers

yoro35i said:
I unzip the pac rom, extracted the boot.img ,on Flashtool i selected fastboot and 'select kernal to flash'' but i am receiving
''ERROR - This action can only be done in fastboot mode''
Click to expand...
Click to collapse
You need to connect in fastboot mode, power off and reconnect the cable while holding Vol+ button until your led turns blue.

[Q] Xperia z not booting after flashing kernel ;(

I am extremely new to root n stuff, i successfully rooted using happy, doomlord binary and was preety happy . flashed few patchs and was happy.
Finally thought i flashing Pure X audio for xperia z and my mistake i saved DoomLord kernal on the same place. i mis selected Doomslord kernel instaed of PureXaudio ;( and finnally when i try hit reboot - it is not booting up
PLZ help !!! what do i need to do to get in to recovery tried power volume up and down , it vibrate but screen doesn't turn on or no progress ;(

Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool

doing it
Bairei said:
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
Click to expand...
Click to collapse
IT is not at all switching on , blank screen ;(
i tried to enter TWRP recovery , holding power on and tapping voume up - no go ;(
is there any other way to get in to revcovery ? i am preety new .. yes i am installing flashtool now and should i try tft ROM or can i flash by back up ?? i am not sure

http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium

Trying it .. small query , pl help
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks a lot, i am doing it right now, downloading kernel
But my doubt is phone seem completely dead - when i hold power button it vibrates and red LED blinks, is this normal behavior ??.

no loader found for this device ;(
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Now i am stuck at teh screen where it says 'no loader found for this device flashtool' can't go any further.
My bootloader is locked, should it be unlocked to get this done
please help !!

No you don't need to unlock the boot loader to flash via flash tool'you need the drivers
http://developer.sonymobile.com/services/flash-tool/
you will need to unlock if you want to flash a custom kernel ..
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Sent from my Nexus 7 using Tapatalk 2

Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance

vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium

fish droid said:
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.

Xperia z bricked after doom Lord kernel! Help pls
QualQuek said:
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Click to expand...
Click to collapse
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.

Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603

hOtsacE22 said:
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
Click to expand...
Click to collapse
You can't flash unsigned kernels on locked bootloaders!! Just stock kernel.sin from identical FW!
Sent from my C6603 using XDA Premium 4 mobile app

PLEASE HELP i flash DooMKernel via cwm after reboot mobile not turn on push power button, the phone vibrates but does not awake
then i flash ftf via flashtool its turn on but again cant use any of the kenerl ..i have unlocked boot loader i tried to clean cash dalvik etc but always get soft bricked >PLEASE HELP
---------- Post added at 04:04 PM ---------- Previous post was at 03:06 PM ----------
Ronco87 said:
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Click to expand...
Click to collapse
same with me .........i try to flash it via cwm but after reboot mobile not turn on then i flash its original stock 2.67 kernel via flashtool my mobile turn on but wifi didnt works ..
then i flash
eXistenZ v4.3.5 ultra edition wifi now working but again : but cant install any of the kernels from doom kernel and others please help

my xperia Z cant turn on
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance

raveldom said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk

kingvortex said:
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
yes it is unlocked,i try to look everywhere on the internet and finally resolved d issues with d phone

problem!!
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?

salujapulkit said:
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
Click to expand...
Click to collapse
Flash the img file from fastboot

Xperia Z not booting up after flashing
Hello guys, I badly need help in fixing my Xperia z c6603 device. I flashed the device using the ftf file from xperifirm and now my device does not boot up and stuck in blank screen.
Kindly assist.