[Q] I9000 dead since flash - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I made a mistake in flashing PDA file of my i9000. The flash stopped after 19 seconds, it was too fast.
About my Galaxy S:
Power button : nothing happen
Download mode : nothing happen
Battery removed/inserted : nothing happen
To resume, whatever I do, screen keep staying black. Nothing display.
Is there anything I can do?
1. USB Jig with a 300K resistor : useless or not?
2. Send it to someone with a RIFF box : useless or not?
Thank you

Weird, usually the SGS is practically un-brickable. I've personally done it tons of flashing to it sometimes with catastrophic results but it always bounced back.
Try sticking ur charger in and let it sit like that for a while. Then try to start the phone. I really doubt bad flashing can fry it. If you get a boot-loop while the screen is blinking release the power button from the starting 3 button combo ( power+down+home) and it should enter download mode.

1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??

prembox said:
1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??
Click to expand...
Click to collapse
1. No way to charge phone
2. I choosed same file for PDA/Phone with i9000XXJVT rom
3. Re-partition/Auto Reboot/F.Reset time checked
Flash lock/Bootloader unchecked
4. FW was Android 2.1, basic one.
Screen stay empty whatever I do, no reaction from the phone.

Get a USB jig. It does wonders most of the time when you think your device is bricked.

USB JIG works fine every time

alyen2 said:
1. No way to charge phone
2. I choosed same file for PDA/Phone with i9000XXJVT rom
3. Re-partition/Auto Reboot/F.Reset time checked
Flash lock/Bootloader unchecked
4. FW was Android 2.1, basic one.
Screen stay empty whatever I do, no reaction from the phone.
Click to expand...
Click to collapse
Re-partition was checked, but did you select a pit file?
If not, that's likely the issue.
USB jigs work great. I bought a couple pre-built ones from Hong Kong just in case I bugger something up.

Huh, was not aware of these USB jigs till this thread. Will definitely be buying one as I flash a new ROM each 3 or 4 days (addiction).

usb jig not working
prembox said:
1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??
usb jig don't work for me. any help
Click to expand...
Click to collapse

same thing happen to me
grrrrr.. after flashing using odin my phone totally dead .. . i have usb jig which is working fine before it happen .. but now not working anymore .
can somebody tell me what happen and what to do .. ?
i charge the phone overnight ..
connect to computer .. not detected
. usb jig .. not going to download mo ..
3 button combo .. grr not working ..
hammer ? hardbrick ? hehehehe .. i hate this ..

yrick27 said:
grrrrr.. after flashing using odin my phone totally dead .. . i have usb jig which is working fine before it happen .. but now not working anymore .
can somebody tell me what happen and what to do .. ?
i charge the phone overnight ..
connect to computer .. not detected
. usb jig .. not going to download mo ..
3 button combo .. grr not working ..
hammer ? hardbrick ? hehehehe .. i hate this ..
Click to expand...
Click to collapse
i m sorry to ask again, is it really i9000? as far as i know, other than i9000 (i9003/i9001 etc) will full brick if u flash i9000 firmware thru odin (as i got one i9003 totally brick when i try to flash i9000 firmware)
sorry if its lame question
Sent from my GT-I9000 using xda premium

compacity said:
i m sorry to ask again, is it really i9000? as far as i know, other than i9000 (i9003/i9001 etc) will full brick if u flash i9000 firmware thru odin (as i got one i9003 totally brick when i try to flash i9000 firmware)
sorry if its lame question
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yeah its really i9000 ... so sad ... please help

yrick27 said:
yeah its really i9000 ... so sad ... please help
Click to expand...
Click to collapse
if thats the case, it shouldnt fail, even in odin flash fail, fone should boot up, n will occur da pc to fone symbol, hav u tried charging ur fone battery (its also a lame question but please try it)
Sent from my GT-I9000 using xda premium

Related

Samsung Galaxy S HARD BRICKED

Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance
Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,
the thing is that the phone is not under any warranty or something and the store i got it is far away now !!
JTAG service if you're in the UK: http://www.fonefunshop.co.uk/
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.
immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!
let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.
in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!
Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..

[Q] my GALAXY S plus dont wont turn on, is it Bricked,Please help....

my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...
Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium
rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??
Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus
nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,
mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge
Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again
mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.
The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium
Any details about this 2 methods???
JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7
My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium
Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,
me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App

Get back to stock rom

Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Did you go into the downloading mode? (Vol down + middle button + power)
Sent from my GT-S5570 using XDA
Download
Yes Im in download mod and I get this message samsung_bml_format FAIL: 90220000
ONW UPDATE FAIL!!!
tauriuxx said:
Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Click to expand...
Click to collapse
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
mr.faridcom said:
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
Click to expand...
Click to collapse
be careful on flashing the bootloader buddy.. it can hard brick your phone.. DO IT AT YOUR OWN RISK..
Brick
Hehe. Now I bricked my phone. When I turn it on it just shows blank screen. But I talked with my Dad and we decided to make a jig usb. Well tomorow Im going to buy a 300k resistor and micro usb. I will try to make a jig usb with my dad so then I can put my phone into download mode and flash it. I hope this gonna work http://www.youtube.com/watch?v=eOxtYSdEy-o
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
chemicalrage said:
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
Click to expand...
Click to collapse
yeah... lmfao
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
tauriuxx said:
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
Buddy i dont know if i am right or not but always remember after u flash a custom rom and u want to return to gingerbread ,,
flash all 4 files i.e boot , phone,pda ,csc files.. never use md5 tar files a single flash files ..if u do that 100% u gonna brick ur phone,,
always remember 4 flash files...
Samsung Galaxy Mini S5570 will not turn on
Samsung Galaxy Mini S5570 device does not respond at all I crashed this ekllenti'i arraza was .Cyanus kernel v1.9 changelog, I would like to be the yarddımc from friends who knew I had to install.
Phone Opening Download Mode but not late

I believe HARD Brick

Please don't tell me it I am an idiot and it is found else where
I was upgrading my fiance S5570 so I installed CWM using the odin method.
then it didn't work so I did an idiot thing where I downloaded ROM manager and installed a wrong version of CWM.
I Had BLACK SCREEN DEAD mobile
but now
when I pres vol up + Home +power
odin reads the mobile but whenever I try to flash anything it stops at setup connection forever
Please help and if you can give me step by step guid
afasseeh said:
Please don't tell me it I am an idiot and it is found else where
I was upgrading my fiance S5570 so I installed CWM using the odin method.
then it didn't work so I did an idiot thing where I downloaded ROM manager and installed a wrong version of CWM.
I Had BLACK SCREEN DEAD mobile
but now
when I pres vol up + Home +power
odin reads the mobile but whenever I try to flash anything it stops at setup connection forever
Please help and if you can give me step by step guid
Click to expand...
Click to collapse
are u able to go in normal recovery mode....from there flash cwm again n install any custom rom
There nothing to do. Rom manager hard bricked your phone.
Sent from my GT-S5570 using xda premium
lightstar3103 said:
There nothing to do. Rom manager hard bricked your phone.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
why you de-motivate other person, when you don't know anything
rom manager forced the mobile to go to recovery mode and when you have wrong recovery it will not boot
take out battery for sometime put it again then press volume down home power you will be in download mode then just flash the firmware
First of all thanks for help everyone..
but i cant go to download mode..
however when i press vol up+home+power odin can read the phone.
i tried to pres download mode combo the insert battery
tried it when usb is connected and not
even one time connected from both sides and once from one side only
do you have a USB jig
and what combo you tried to go into download mode
dheeraj (dhlalit11) said:
do you have a USB jig
and what combo you tried to go into download mode
Click to expand...
Click to collapse
I use vol down+home+power
and i dont have a usb jig but I am going to buy the resistors and try to make one
afasseeh said:
I use vol down+home+power
and i dont have a usb jig but I am going to buy the resistors and try to make one
Click to expand...
Click to collapse
Not trying to be pessimistic, but if the jig does't work, ur only option will be service centre. Gud luck bro.
kirakun said:
Not trying to be pessimistic, but if the jig does't work, ur only option will be service centre. Gud luck bro.
Click to expand...
Click to collapse
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee
afasseeh said:
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee
Click to expand...
Click to collapse
Sounds good to me. They will probably say they will look at it and u will get it in 2 weeks...
afasseeh said:
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee
Click to expand...
Click to collapse
say: i was upgrading to 2.3.6 gingerbread via kies when suddenly my pc ( or laptop ) shutdown
Messi10 said:
say: i was upgrading to 2.3.6 gingerbread via kies when suddenly my pc ( or laptop ) shutdown
Click to expand...
Click to collapse
thanks.. i will do so.. but what do u expect they would say..
1 we will repair
2 it is not our fault
3 u can exchange it for something in same price category
4 pay 20% of price and get one new..
what do u expect the scenario would be
afasseeh said:
thanks.. i will do so.. but what do u expect they would say..
1 we will repair
2 it is not our fault
3 u can exchange it for something in same price category
4 pay 20% of price and get one new..
what do u expect the scenario would be
Click to expand...
Click to collapse
1

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

Categories

Resources