Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance
Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,
the thing is that the phone is not under any warranty or something and the store i got it is far away now !!
JTAG service if you're in the UK: http://www.fonefunshop.co.uk/
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.
immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!
let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.
in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!
Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..
Related
I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul
Hey guys need a little help here.
today i was trying to flash apex and fail, then i flash back to stock 2.1
after its flashing the phone does not turn on. nothing showing up.
can't go to the download mode. also tried to connect to the computer.
the screen just complete black.
will a jig work?
How did you try to flash 2.1
Sent from my GT-I9000 using XDA Premium App
i was in download mode and odin it with pit file
chaolanren said:
i was in download mode and odin it with pit file
Click to expand...
Click to collapse
Flashback to 2.1 completed successfully? Which ODIN did u use? What keycombo are you trying
A jig might work but more likely you'll need JTAG. Same thing happened to my phone a week ago and I ended up shipping it off to connexion2005. This is a high risk when changing bootloaders (2.3 -> 2.2/2.1).
watsaa said:
Flashback to 2.1 completed successfully? Which ODIN did u use? What keycombo are y trying
Click to expand...
Click to collapse
It did show blue sign saying it is finished. then the phone shut off itself and never come back on.
I used odin3 v1.0 the old one I always use.
I tried keycombo
Pull battery, put in battery, vol down+power---no work
Pull battery, put in battery, vol down and up+power----no work
Pull battery, put in battery, vol down and up and power then plug usb---no work
Pull battery, put in battery, vol down and up+usb cable no work
Are you sure the battery isnt dead?
ntdb said:
A jig might work but more likely you'll need JTAG. Same thing happened to my phone a week ago and I ended up shipping it off to connexion2005. This is a high risk when changing bootloaders (2.3 -> 2.2/2.1).
Click to expand...
Click to collapse
I repaired your phone and sent it back today also...
mrhaley30705 said:
Are you sure the battery isnt dead?
Click to expand...
Click to collapse
i did test the battery and it is not dead
How far did you get before you f+4'd on your Apex attempt?
I'm guessing bootloaders the key role here. Also did you master clear before you flashed back to eclair, or just straight to odin?
Sent from I'm sure glad Danger went under, else I'd still be on a Mr.Cartoon SK2.
melbourne408 said:
How far did you get before you f+4'd on your Apex attempt?
I'm guessing bootloaders the key role here. Also did you master clear before you flashed back to eclair, or just straight to odin?
Sent from I'm sure glad Danger went under, else I'd still be on a Mr.Cartoon SK2.
Click to expand...
Click to collapse
I didn't master clear just odin flashed
What .tar did you use to flash 2.1? Was it the one with the 3 button fix?
studacris said:
What .tar did you use to flash 2.1? Was it the one with the 3 button fix?
Click to expand...
Click to collapse
it was the one that can solve 3 botton fix problem and if the system flash goes bad, it will save it back
Ok there's where the problem happened. That .tar only contains the sbl.bin (secondary bootloader) with no primary. So now you have a gingerbread primary and a froyo secondary resulting in a hard brick, you're only option now is jtag. Connexion2005 has already posted in this thread, pm him and he'll get you fixed up.
chaolanren said:
it was the one that can solve 3 botton fix problem and if the system flash goes bad, it will save it back
Click to expand...
Click to collapse
You might need Jtag service. BUT before you do that try making/buying a jig since that will be cheaper to check than just sending for Jtag
Don't think a jig can help
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
One thing I found after bricking my phone a few times is you might want to try download mode again. Have Odin running with a full stock rom loaded. Try the battery trick again. Plug your phone into the usb cable, making sure the battery is removed. Hold both volume buttons and insert your battery. Wait a minute while holding the volume buttons. While holding the volume buttons, keep pulling the battery out and putting it back in. Even though nothing shows up on the phone screen, once Odin did pick up the phone on com and I was able to flash it.
worth a shot. I was ready to send my my phone in for jtag, but persisted and got lucky.
If you flashed Gingerbread bootloaders, then flashed 3 button fix, you hard bricked it. Only way to revive it is with jtag.
anybody know anyone has jtag service in Los Angeles?
The captivate is one if the most difficult phones to jtag, and flute that reason, The only place I know of that can jtag a captivate is
mobiletechvideos.com.
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Phenom2 said:
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
USB jig
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
ichson said:
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Click to expand...
Click to collapse
Already tried... Odin doesn't show me anything... neither adb nor windows..
chasmodo said:
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
Click to expand...
Click to collapse
I have unbricked all my brickeds phones, I think there's always a solution for unbricking it, but if I can't I will take it to SSC
Archangel919 said:
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
Click to expand...
Click to collapse
I don't think that the problem is battery, It was 55% yesterday evening, but I haven't friend with a Gnote
I haven't a JIG but I will try to make one if I can find a 300K resistor
Can I find a 300K resistor into a old none working device ? (Like a old radio, tv, telecommand ?)
Phenom2 said:
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
similar type of brick....and the suggestion given by the SSC is better to buy a new mobile since they have to replace the main board....(without warranty)..and cost will be around (Dhs.1150) that is almost half the price of new mobile....
btw i have tried jig also but no luck...
I have the same problem with my galaxy note.
i treid everything no reaction
pls has somebody an idea for me ?
Same problem with me.
Weird, I had a I91000 for a year, flashed everything and never had any problems. Never got close to bricking it.
I did this:
Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719 - OK
Ran again CWM.
I put the latest nightly from CM9. When I started flashing it, it hung. I turned off my cell (no other option, it was stuck), now it won't turn on.
Whoa... What did I do wrong? I admit I was anxious and didn't take the proper care I should've, I was very anxious, but, wow... I wasn't expecting it to be so easily brickable.
Do I have any hope left?
A couple of days I bought an i9000 off ebay, it came running eclare 2.1
I followed a guide to rooting it by installing a tar via heimdall, however this soft bricked it and when I turned it on it would just get stuck on the samsung logo. My phone seemed to suffer from the 3 button bug and therefore I had to get a jig for it which I received this morning.
I then tried to fix it by using this guide: http://forum.cyanogenmod.org/topic/...ot-cwm-and-cyanogen-install-help/#entry356900
Bassically I used odin to install the EU samsung firmware, odin said everything went fine and it all passed, however I can no longer turn my phone on.
Screen stays blank, I tried putting batery in, jig in and connecting it to my pc to see if it was just the screen that wasnt responding but still nothing in odin.
Someone please tell me I havent bricked my phone 2 days after getting it.
First of all, can you ask enter download mode?
Secondly, are you are that it is a I9000 and not one of the variants?
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
snapper.fishes said:
First of all, can you ask enter download mode?
Secondly, are you are that it is a I9000 and not one of the variants?
Click to expand...
Click to collapse
Cant seem to enter download mode, and it is a GT-i9000
Wait, are you saying that you can't enter download mode even with the jig?
Richy19 said:
Cant seem to enter download mode, and it is a GT-i9000
Click to expand...
Click to collapse
If you can't enter download mode then you should get a USB jig.
If my posts helped, don't mind hitting the THANKS button.
snapper.fishes said:
Wait, are you saying that you can't enter download mode even with the jig?
Click to expand...
Click to collapse
Yea, nothing happens when I press the power button/use the jig.
And this is 100% a software/firmware issue as it happened after flashing.
I have a feeling I disconnected it too soon, basically odin said it had passed and so i unplugged it but it just stayed on the download screen so I thought it might have gotten stuck and took the battery out. However i might have took the battery out while it was updating something, I dont know.
if you have completely bricked the phone you may have to do this http://forum.xda-developers.com/showthread.php?t=1330491&highlight=usb+jig
slow--welder59 said:
if you have completely bricked the phone you may have to do this http://forum.xda-developers.com/showthread.php?t=1330491&highlight=usb+jig
Click to expand...
Click to collapse
Do you know if th bootloader/firmware is stored on the motherboard? Im thinking of just looking for a cheap one on ebay with like a broken screen or something and swapping the MoBo over
Richy19 said:
Do you know if th bootloader/firmware is stored on the motherboard? Im thinking of just looking for a cheap one on ebay with like a broken screen or something and swapping the MoBo over
Click to expand...
Click to collapse
Everything is stored on the mobo. However, I am not sure if it will be cheap.
you can pick them up for about £30 if you wait
I have a problem with my SGS 9000 too after I mistakely install firmware for Galaxy Tab. Now it's bricked and it lost download mode. On all actions (power button, entering download mode) I just feel very short and almost insensible vibration impulse. May be somebody had same problem?
P.S. Sorry for English, I'm russian))