Database Develop

Samsung Galaxy S HARD BRICKED

Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance

Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.

if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!

evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,

the thing is that the phone is not under any warranty or something and the store i got it is far away now !!

JTAG service if you're in the UK: http://www.fonefunshop.co.uk/

The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...

I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd

immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.

immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!

let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not

immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium

dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.

in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again

There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.

Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!

Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..

[Q] I Need help, GT N7000 Bricked.

Hey Everybody..
I think my Note is totally bricked.
It cant go in Downloadmode.
What can i do? Plz. Help me. Im looost..
Thanks

but or make USB jig

Hmm, does the usb jig help in totally dead situation?

Perhaps this will help you get to Download Mode with USB jig:
http://forum.xda-developers.com/showthread.php?t=1402286
I sincerely hope it helps.

I've bricked my galaxy note too, I was trying to flash siyah kernel. Now it just shows Samsung logo in the beginning then bunch of colored lines fade into white screen and turns off. Please help needed

emre1903 said:
I've bricked my galaxy note too, I was trying to flash siyah kernel. Now it just shows Samsung logo in the beginning then bunch of colored lines fade into white screen and turns off. Please help needed
Click to expand...
Click to collapse
Did you try the below solution? Buy a JIG on eBay, it's a must have for flash-o-philes!
Sramie said:
but or make USB jig
Click to expand...
Click to collapse

How do i check my phone, is it hardbricked or softbricked?

Hi there.
From what I've met with my G.N, when you got other message than the yellow triangle, you may flash your G.N with a custom rom with no problems within Download Mode.
If you got the yellow triangle, you may could go to download mode, too and flash a custom rom.
if no way to go to download mode, then I think the only answer is JIG.
B.R

I have tried the 3-bottom method, and no reaction! Keep turned off! (Dead)

Snoopyass said:
I have tried the 3-bottom method, and no reaction! Keep turned off! (Dead)
Click to expand...
Click to collapse
Maybe the USB jig will help you to boot into the download mode.
Can you enter CWM?
How did you "bricked" your Note?
What have you flashed?

I would flash my Note with odin.
But it fails, i think it was the wrong PIT file.
And after that, it turns off, and now i cant turn it on again.
Usb Jig is only for 2.3.4 and earlier use?
Mine is 2.3.6

Snoopyass said:
I would flash my Note with odin.
But it fails, i think it was the wrong PIT file.
And after that, it turns off, and now i cant turn it on again.
Usb Jig is only for 2.3.4 and earlier use?
Mine is 2.3.6
Click to expand...
Click to collapse
Their is nothing to do with version. JIG used for Put your device in Download mode and Clear your Custom binary Counter.
Before flashing ROM please read all instructions carefully.
As they said while flashing ROM using PC Odin you should not use Pit file and Not to Tick "Re-Partition".

Yes.. MY BAD..! Now im stuck here with a dead phone. But the Usb jig can wake it alive again??

Snoopyass said:
Yes.. MY BAD..! Now im stuck here with a dead phone. But the Usb jig can wake it alive again??
Click to expand...
Click to collapse
The USB jig can boot your phone into the download mode, but only if the phone does response in any other way, I think. For example showing the battery icon, when plugged in for charging.
But you can try it anyways.

The download mode will work!
the only exception is a hardware defect.
you can't get an hardware defect by flashing.
the bootloader (3 button or jig) will work.
there is no way to kill the hardware during flashing or something else.
buy a jig and it will work.
you wrote you see the samsung logo - that means, that the bootloader is OK.
happy flashing ;-)

schokibaerchen said:
The download mode will work!
the only exception is a hardware defect.
you can't get an hardware defect by flashing.
the bootloader (3 button or jig) will work.
there is no way to kill the hardware during flashing or something else.
buy a jig and it will work.
you wrote you see the samsung logo - that means, that the bootloader is OK.
happy flashing ;-)
Click to expand...
Click to collapse
Yes. But if your phone totally does not response, it might be a dead bootloader too. thats what i meant.
Sent from my Galaxy Note using xda premium

My N7000 is totally dead, it wont start up, the screen keep turned off. No response.

Snoopyass said:
My N7000 is totally dead, it wont start up, the screen keep turned off. No response.
Click to expand...
Click to collapse
Well you can try the usb jig anyways, but if there is still no response there is no way out and you have to bring it to your local service partner or samsung, I think.
But one fact is good for you:
It doesn't response on anything you do. So that means it can't be read out and they'll not see that you've flashed it. They'll just change the mainboard and resend it to you. This happened to me with my samsung galaxy s.
I totally destroyed the bootloader and it won't response. I directly send it to samsung and they just change the mainboard, as I said.
For sure you doesn't have to pay anything, assumed you are in warranty.

I'm gonna buy a jig immediately, however all of them are indicated as for Galaxy S2. Will it work with galaxy note too, or should I keep looking something specific for Galaxy Note ?

It will work for you SGNote, too. Just go get one, and let us know what happened.

Samsung Galaxy bricked?

Hello guys.
I flashed the galaxy S on Odin with no files attached.
Now the phone will not respond at all. I have tried everything but, there is no lights or reaction as ever. Is this fixable?
I have ordered a JIG but i doent have to much expectations.
Regards Morten

It doesn't even turn on? Try taking the battery out for a few minutes.

Yes thats correct. It happend after flash.
Starting to think if the battery stopped working.
There is no sign of life at all.
The battery was fully charged.
Have tried your suggestion. With no luck.
Edit: Hmm, i have tested the battery now and it shows 4 volt between + and -.
So that shouldnt be the problem.

Is your phone can get into Download Mode? if can then can be safe

ayong chia said:
Is your phone can get into Download Mode? if can then can be safe
Click to expand...
Click to collapse
Phone will not even start

I'm having the same problem. Phone is completely unresponsive and I cannot get into stock recovery or D/L mode

Quada said:
I'm having the same problem. Phone is completely unresponsive and I cannot get into stock recovery or D/L mode
Click to expand...
Click to collapse
I am sorry to hear.
This is my friends phone. So i am sending the phone for fix at this place:
http://www.youtube.com/user/MobileTechVideos?feature=mhee
I hope they will fix it for me.
Morten

kalinkamaen said:
Hello guys.
I flashed the galaxy S on Odin with no files attached.
Now the phone will not respond at all. I have tried everything but, there is no lights or reaction as ever. Is this fixable?
I have ordered a JIG but i doent have to much expectations.
Regards Morten
Click to expand...
Click to collapse
Dear God. Why did you do that in the first place? I didn't even know such a thing is possible
Knowledge is Power. Guard it well.

snapper.fishes said:
Dear God. Why did you do that in the first place? I didn't even know such a thing is possible
Knowledge is Power. Guard it well.
Click to expand...
Click to collapse
Yes I know it was stupid. I had a PIT file connected.
And didnt know what i was doing. I couldnt dream of
the program would flash over bootloader.
But i learned and have to pay the price for it.

You can fix it with usb Jig or there is a tutorial for Captive that you can use on your phone and put it in download mode. I think for that you jave to install linux, hemindail and java. Also, you will need to install android sdk for adb reboot recovery command Search the forum, the fix is already there
Sent from my GT-I9000 using XDA App

Take out battery and hold 3 button combo for download mode. Than insert battery and it should throw u to downloading.
How is it possible to flash nothing? Doesn't odin warn you if you got "nothing"?
Should be fixed in next ver.

Download Mode "bricked"
Hi,
My Download Mode is working (3 buttons function), but the Win7 isn`t recognizing as Odin...(I`ve already tried to resolve USB drivers troubles but I think that is not the right option...other Samsung Androids are working weel)
So I am not able to flash anything trough Odin...and the CWM 3.0 show me many "E: unknown moun/ storage"...it`s impossible to restore or install an update.zip for example.
What can I do?

[BRICKED AGAIN !] Black screen, no bootscreen, no detection

Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated

Phenom2 said:
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file

Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.

USB jig
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !

ichson said:
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Click to expand...
Click to collapse
Already tried... Odin doesn't show me anything... neither adb nor windows..
chasmodo said:
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
Click to expand...
Click to collapse
I have unbricked all my brickeds phones, I think there's always a solution for unbricking it, but if I can't I will take it to SSC
Archangel919 said:
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
Click to expand...
Click to collapse
I don't think that the problem is battery, It was 55% yesterday evening, but I haven't friend with a Gnote
I haven't a JIG but I will try to make one if I can find a 300K resistor
Can I find a 300K resistor into a old none working device ? (Like a old radio, tv, telecommand ?)

Phenom2 said:
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
similar type of brick....and the suggestion given by the SSC is better to buy a new mobile since they have to replace the main board....(without warranty)..and cost will be around (Dhs.1150) that is almost half the price of new mobile....
btw i have tried jig also but no luck...

I have the same problem with my galaxy note.
i treid everything no reaction
pls has somebody an idea for me ?

Same problem with me.
Weird, I had a I91000 for a year, flashed everything and never had any problems. Never got close to bricking it.
I did this:
Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719 - OK
Ran again CWM.
I put the latest nightly from CM9. When I started flashing it, it hung. I turned off my cell (no other option, it was stuck), now it won't turn on.
Whoa... What did I do wrong? I admit I was anxious and didn't take the proper care I should've, I was very anxious, but, wow... I wasn't expecting it to be so easily brickable.
Do I have any hope left?

[Q] Galaxy Pop/Mini half hard bricked (can go into a strange mode) Experts Neede

Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???

llsiddhantll said:
Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???
Click to expand...
Click to collapse
reinstall windows and try again. also try a different computer or laptop.

michal383 said:
reinstall windows and try again. also try a different computer or laptop.
Click to expand...
Click to collapse
I did, I am on a different PC right now, installed all drivers etc. But I just realized... I think I might have flashed the Pop Plus kernel...
Since it is ultimately the low level OS, maybe that is preventing it from starting? Is there a way to forcefully flash a different kernel? :'(
Also, the strange mode that it used to go into is gone now.. I cannot make the PC recognize the phone at all now, and the phone does not power up. So I'm kinda in a doomed position right now..:crying:

The mistake was the kernel flashing. If something is not booiting you need to wipe data/cache. This works with stock ROM too.

ast00 said:
The mistake was the kernel flashing. If something is not booiting you need to wipe data/cache. This works with stock ROM too.
Click to expand...
Click to collapse
I know, but the problem is, I cannot go into Download Mode or Recovery Mode. The battery is charged, but even after pressing the Power button or any of its combinations, the phone just doesn't turn on! No response what-so-ever.
Any suggestions?

Then no idea. I thought maybe you don't know where was the mistake so that's why I wrote it.

SSC. Simple right ?

F4uzan said:
SSC. Simple right ?
Click to expand...
Click to collapse
What is SSC? I have no idea about this.. Can you please explain what to do? :fingers-crossed:

llsiddhantll said:
Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???
Click to expand...
Click to collapse
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !

llsiddhantll said:
What is SSC? I have no idea about this.. Can you please explain what to do? :fingers-crossed:
Click to expand...
Click to collapse
Samsung Service Center
-------------------------------------
Your Mini life was in this place.

F4uzan said:
Samsung Service Center
-------------------------------------
Your Mini life was in this place.
Click to expand...
Click to collapse
Oh yes..I guess I'll have to go there.. BTW, what should I say? My phone is still in warranty, but I don't have the papers etc right no, since I'm in college.
I read somewhere that they will change your motherboard for free if in warranty, but how much would it cost? I was thinking of telling them that Kies did this

Zafar7777 said:
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !
Click to expand...
Click to collapse
As I asked someone else too, how much do you think it would cost if I don't have the warranty papers right now? It still is in warranty though..
And what did you tell them that convinced them that you were innocent?

I also had a problem where i had to get my motherboard changed when i asked the samsung people they said it'll cost Rs. 4000 for changing the motherboard so it'll be better if you find your warranty papers and don't worry just tell them that the phone's not working don't tell them about the rom flash stuff they'll repair it for free if you have your warranty papers..
Sent from my GT-S5570 using xda premium

arjunraina7 said:
I also had a problem where i had to get my motherboard changed when i asked the samsung people they said it'll cost Rs. 4000 for changing the motherboard so it'll be better if you find your warranty papers and don't worry just tell them that the phone's not working don't tell them about the rom flash stuff they'll repair it for free if you have your warranty papers..
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
That's the thing, I can't have the warranty papers because I am in college (far from home ), but I'll see what they do, I am going to the repair center today!

Yeah but its gonna cost you a lot of money.. :sly:
Sent from my GT-S5570 using xda premium

arjunraina7 said:
Yeah but its gonna cost you a lot of money.. :sly:
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yep, they asked me for 4,000.. That's almost half the price I bought the phone! I think I'm going to wait till December.. I'll be home then!
Thanks everyone for replying and helping!

llsiddhantll said:
Yep, they asked me for 4,000.. That's almost half the price I bought the phone! I think I'm going to wait till December.. I'll be home then!
Thanks everyone for replying and helping!
Click to expand...
Click to collapse
Yeah... I told ya you should get your warranty papers....:thumbup:
Sent from my GT-S5570 using xda premium

can u please explain???
Zafar7777 said:
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !
Click to expand...
Click to collapse
the same thing happened to me too..
the fun part is that this WAS my brother's phone(i mentioned WAS for the phone's been dead for a week )
can u please explain what did the SSC guy told you in detail???

unbricking mini/pop
try deleting all ur data on ur phone - ur android, data, etc....just factory reset it and then try flashing using odin!!!! if that also not works then use clockwork mod and restore backed up firmware on ur phone.

-_- he said he can't enter recovery or any other mode
Sent from my GT-S5570 using xda app-developers app