Database Develop

[Q] Yet another HELP IM BRICKED thread

Yeah i know, another jackass that is stupid and creates another thread for this. I have had experiance with my phone going with odin and all that good stuff, so i thought i could do the same to my co-workers phone. But he didnt have the 3 button combo working so i just used adb. I got into download started odin got stuck on file anyalisis so i unplugged it... jackass mistake. even after reading all the people that say dont. so now when i power it on its just phone ! computer. NO ATT screen. so are the bootloaders fried? i doubt that cause it still powers on. No button combo will work with usb. (vol up/down -usb, vol up/down/power/ -usb) none. i have tried everything. just goes to phone ! comp. Do i really have to tell him to wait for a jig? And will a jig fix it??? Thats what i am mostly worried about. i dont wanna pay for JTAG. Thanks guys

yup a jig will work. as long as it lights up its not completely fuxxored. could also build a ghetto rigged jig from radioshack and a microUSB end too if ya'll dont wanna wait

Haas360 said:
Yeah i know, another jackass that is stupid and creates another thread for this. I have had experiance with my phone going with odin and all that good stuff, so i thought i could do the same to my co-workers phone. But he didnt have the 3 button combo working so i just used adb. I got into download started odin got stuck on file anyalisis so i unplugged it... jackass mistake. even after reading all the people that say dont. so now when i power it on its just phone ! computer. NO ATT screen. so are the bootloaders fried? i doubt that cause it still powers on. No button combo will work with usb. (vol up/down -usb, vol up/down/power/ -usb) none. i have tried everything. just goes to phone ! comp. Do i really have to tell him to wait for a jig? And will a jig fix it??? Thats what i am mostly worried about. i dont wanna pay for JTAG. Thanks guys
Click to expand...
Click to collapse
You could also try the one click unbrick I have not used it but it may work for you. The phone is not hard bricked which would need to then be jtagged, it is only soft bricked

One click unbrick? Where? Do you mean one click Odin to go to stock? Cause that wont work unless in download mode
Sent from my SGH-I897 using XDA App

Yeah i tried heimdal and one click ubrick it gives me. It doesnt recognize the phone is in download or phone!computer mode

i dunno if it will work but try this: take the battery out, put it back in, plug the phone into ur pc, when the phone /!\ comp screen comes up, hold vol down + vol up + power, wait till the second time the /!\ disappears then release only the power button, you should now be in download mode

Haas360 said:
Yeah i tried heimdal and one click ubrick it gives me. It doesnt recognize the phone is in download or phone!computer mode
Click to expand...
Click to collapse
I would post in the one click unbrick thread that is still very new and should fix your situation. Adam is working pretty hard to make that compatable, and universal. Make sure you give as much info as possible about the OS platform you are trying to run it on.
Sent from my SAMSUNG-SGH-I897

As mentioned, a JIG will save you or possible the one click unbrick tool. It sounds like you don't have the Heimdall driver installed correctly as well. Good luck!

Alright so a jig will work. But I don't want to drive into town if one click will work. When I try the resolution center to install drivers Samsung composite device isn't listed so I can't. I have my captivate can I just use that to install the drivers then switch em? I thought I already had the drivers installed cause I connect mine all the time.
Sent from my SGH-I897 using XDA App

Alright so I got a jig and its bow in download mode. But Odin just sits at "set pit file" "do not turn off target " no status bar on the cappy either ...... now what? Its on 2.2 I want it back to stock and so I can put root and cyanogen on it.
Sent from my SGH-I897 using XDA App

this has happened to me quite a few times, try opening odin BEFORE you plug in your cappy in download mode

Hahahaha oh my gosh after I got it into download mode I couldn't get Odin to recognize. But that's because even though adb cmd was exited. It was still in the background process. Therefore blocking Odin. I did it! With your guys help. Thanks guys. Oh and Josh I bought one of your jigs from mobile tech videos. just to help out.
Sent from my SGH-I897 using XDA App

[Q] Download Mode Gone?? WTF

So I recently made a thread how adb wasn't working and that evolved into not being able to get into download mode. Now after not being able to get into download mode for days, I'm still stuck on cm7 with no way of getting back to stock. 3-button recovery won't work, the only way to get into recovery is adb reboot recovery. No button and cable methods work to get phone into download mode as well as adb reboot download. I even recently tried http://www.youtube.com/watch?v=lojU5bvGz3c which is a makeshift usb jig. I successfully made it but it would only turn the phone on. WTF. I'm afraid to buy a real usb jig from online because it most likely will cause the same thing. What is there to do? I'm completely lost. The phone works, the rom is okay I just cannot get back to stock and get rid of cm7. There are lots of issues I need to fix and cannot because of this. Any ideas?????
EDIT: Now I'm completely f'ed. I tried flashing cm7 instead of MIUI again to try once more if I would have better luck on just cm7, but during flash in cwm the phone turned off because the battery compartment was loose and now the phone boots up and goes into recovery shows some code then turns off again

(This post just in case anyone missed the reason in the edit)
Reason: EDIT: FIXED! Don't know what happened. Rearranged resistors and tried again and finally got it
Click to expand...
Click to collapse

I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?

mikel.canovas said:
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
Click to expand...
Click to collapse
What's your process to get CM7/Miui installed?
On a side note, ADB won't connect to your device unless you have the Nexus S drivers installed on you computer when CM7/Miui is installed

When I was last on cm7 adb reboot download doesn't work.
Drivers installed
Just sayin
Sent from my unbrickable cappy *bam*

yeah, i distinctly remember the first CM7 build threads that came up here saying that adb reboot download DOES NOT work, and you DO need working 3 buttons or a jig
not sure why that was removed from the threads

A jig should work
You might be coming into contact with the resistors (I can't watch that youtube video from work--firewalled--so I don't know what the setup looks like). Any contact with the them will make it not work. Try insulating them more with some heavy packing tape.
I cut up my mini-usb plug from my car charger (didn't need it), and peeled off all the plastic so I could easily touch the correct two pins with the jig when the hacked up mini-usb is plugged in. Works like a charm. Sometimes if you aren't touching them just right, or if one end of the pin is touching the wrong point the power will come on.
Try harder with the jig, I guarantee you it will work (and you shouldn't have to buy one--it's too easy to do yourself for less than $2 and about 5 minutes).
Good luck!

Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case

kangi26 said:
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
Click to expand...
Click to collapse
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium

b-eock said:
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, I know, but without all of the details. I figure it doesn't hurt to ask
Sent from a autonomous device

Thanks a ton for the info on GB i've been beating my head trying to get my Mesmerize flashed to a rooted EH09. The vol down button was teh trick i needed.

No download Mode after I897 GB Bootloaders on CM7
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore

If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.

So is there hope?
4-2ndtwin said:
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
Click to expand...
Click to collapse
So if i open the phone and do the unbrickable mod is there a chance to solve the problem? thank you in advance

Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.

4-2ndtwin said:
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
Click to expand...
Click to collapse
Thank you man i'm going to talk with Adam to see if i can solve the problem.

guilleglad said:
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
Click to expand...
Click to collapse
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good luck.

0gravity1 said:
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good look.
Click to expand...
Click to collapse
If the phone doesn't show any signs of life (wich it wont if he failed on sbl) Jtag or Unbrickable Mod would be your 2 best bet. (Id use Unbrickable mode since it will protect you from future issues.)

Sorry haven't checked this thread in a while. My process for going to cm7/miui is flashing stock eclair through odin one click, then rooting and installing cwm. From there I just flash the latest nightly or whatever it is. Nothing I'm doing seems to be wrong

The problem is that I should be able to get into download mode without having to use a jig every single time. 3 button combo should work, but it doesn't when using cm7/miui for some reason

Can't boot, getting a yellow triangle...

First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)

Maxxd01 said:
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Click to expand...
Click to collapse
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location

xsenman said:
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
Click to expand...
Click to collapse
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...

Maxxd01 said:
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Click to expand...
Click to collapse
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode

xsenman said:
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
Click to expand...
Click to collapse
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success

Maxxd01 said:
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Click to expand...
Click to collapse
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app

rajamahbub said:
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.

Maxxd01 said:
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Click to expand...
Click to collapse
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app

rajamahbub said:
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I'm wondering if my Google Nexus S drivers didn't not conflicted with the drivers I installed. I don't know.
Well, I'll try with another laptop, if that don't work, is it advisable to use a jig connector from a "trusted" seller? I'm asking because I already saw a comment or two along the about blewed (is this a word?) up phones.

Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you

Latrop said:
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Do I risk blowing up the phone using JIG?

No the jig basicly makes it so a certain voltage signal is sent to the CPU triggering download mode no risk at all
Sent via that ninja standing right behind you

I tried with another laptop with very well configured drivers, and didn't worked. Still didn't detected by odin. When I tried with another galaxy it works, after entering download mode...
I'm not admired, because before the brick, I was not able to enter the download mode with como keys, I shouldnt be surprised that does not happen now..

Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!

xmavrickx2005 said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
Click to expand...
Click to collapse
That would be a good suggestion if could get into download mode Tried everything, including some other solutions that I found around the Web. Looks like the bootloader was corrupted since the beginning, and now that I need it more than ever (because the black screen of death phone-!-pc), I stucked until (hopefully) i get a JIG... Already bought one, have to wait a few days to receive it. Until then, I'm going to use a old nokia.

Jig is only option then install a stock gingerbread that will fix 3 button combos
Sent via that ninja standing right behind you

Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.

Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.

bakatenchu said:
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
Click to expand...
Click to collapse
eBay.

Maxxd01 said:
eBay.
Click to expand...
Click to collapse
Thanks a lot. Managed to get one that revived my phone well.

[Q] Think I have bricked my i9000

A couple of days I bought an i9000 off ebay, it came running eclare 2.1
I followed a guide to rooting it by installing a tar via heimdall, however this soft bricked it and when I turned it on it would just get stuck on the samsung logo. My phone seemed to suffer from the 3 button bug and therefore I had to get a jig for it which I received this morning.
I then tried to fix it by using this guide: http://forum.cyanogenmod.org/topic/...ot-cwm-and-cyanogen-install-help/#entry356900
Bassically I used odin to install the EU samsung firmware, odin said everything went fine and it all passed, however I can no longer turn my phone on.
Screen stays blank, I tried putting batery in, jig in and connecting it to my pc to see if it was just the screen that wasnt responding but still nothing in odin.
Someone please tell me I havent bricked my phone 2 days after getting it.

First of all, can you ask enter download mode?
Secondly, are you are that it is a I9000 and not one of the variants?

have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

snapper.fishes said:
First of all, can you ask enter download mode?
Secondly, are you are that it is a I9000 and not one of the variants?
Click to expand...
Click to collapse
Cant seem to enter download mode, and it is a GT-i9000

Wait, are you saying that you can't enter download mode even with the jig?

Richy19 said:
Cant seem to enter download mode, and it is a GT-i9000
Click to expand...
Click to collapse
If you can't enter download mode then you should get a USB jig.
If my posts helped, don't mind hitting the THANKS button.

snapper.fishes said:
Wait, are you saying that you can't enter download mode even with the jig?
Click to expand...
Click to collapse
Yea, nothing happens when I press the power button/use the jig.
And this is 100% a software/firmware issue as it happened after flashing.
I have a feeling I disconnected it too soon, basically odin said it had passed and so i unplugged it but it just stayed on the download screen so I thought it might have gotten stuck and took the battery out. However i might have took the battery out while it was updating something, I dont know.

if you have completely bricked the phone you may have to do this http://forum.xda-developers.com/showthread.php?t=1330491&highlight=usb+jig

slow--welder59 said:
if you have completely bricked the phone you may have to do this http://forum.xda-developers.com/showthread.php?t=1330491&highlight=usb+jig
Click to expand...
Click to collapse
Do you know if th bootloader/firmware is stored on the motherboard? Im thinking of just looking for a cheap one on ebay with like a broken screen or something and swapping the MoBo over

Richy19 said:
Do you know if th bootloader/firmware is stored on the motherboard? Im thinking of just looking for a cheap one on ebay with like a broken screen or something and swapping the MoBo over
Click to expand...
Click to collapse
Everything is stored on the mobo. However, I am not sure if it will be cheap.

you can pick them up for about £30 if you wait

I have a problem with my SGS 9000 too after I mistakely install firmware for Galaxy Tab. Now it's bricked and it lost download mode. On all actions (power button, entering download mode) I just feel very short and almost insensible vibration impulse. May be somebody had same problem?
P.S. Sorry for English, I'm russian))

Galaxy s advance broke

hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers

EranTerran said:
hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers
Click to expand...
Click to collapse
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....

Sami Kabir said:
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....
Click to expand...
Click to collapse
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.

EranTerran said:
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.
Click to expand...
Click to collapse
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.

shut_down said:
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.
Click to expand...
Click to collapse
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?

EranTerran said:
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?
Click to expand...
Click to collapse
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?

shut_down said:
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?
Click to expand...
Click to collapse
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG

EranTerran said:
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG
Click to expand...
Click to collapse
Actually you lost your download mode interface..
Just go to download mode.. If at you see black screen.. Still try flashing your phone with Odin..
Hope it may help you
Sent from my GT-S5830i using xda app-developers app