First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Maxxd01 said:
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Click to expand...
Click to collapse
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
xsenman said:
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
Click to expand...
Click to collapse
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Maxxd01 said:
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Click to expand...
Click to collapse
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
xsenman said:
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
Click to expand...
Click to collapse
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Maxxd01 said:
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Click to expand...
Click to collapse
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Maxxd01 said:
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Click to expand...
Click to collapse
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I'm wondering if my Google Nexus S drivers didn't not conflicted with the drivers I installed. I don't know.
Well, I'll try with another laptop, if that don't work, is it advisable to use a jig connector from a "trusted" seller? I'm asking because I already saw a comment or two along the about blewed (is this a word?) up phones.
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Latrop said:
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Do I risk blowing up the phone using JIG?
No the jig basicly makes it so a certain voltage signal is sent to the CPU triggering download mode no risk at all
Sent via that ninja standing right behind you
I tried with another laptop with very well configured drivers, and didn't worked. Still didn't detected by odin. When I tried with another galaxy it works, after entering download mode...
I'm not admired, because before the brick, I was not able to enter the download mode with como keys, I shouldnt be surprised that does not happen now..
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
xmavrickx2005 said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
Click to expand...
Click to collapse
That would be a good suggestion if could get into download mode Tried everything, including some other solutions that I found around the Web. Looks like the bootloader was corrupted since the beginning, and now that I need it more than ever (because the black screen of death phone-!-pc), I stucked until (hopefully) i get a JIG... Already bought one, have to wait a few days to receive it. Until then, I'm going to use a old nokia.
Jig is only option then install a stock gingerbread that will fix 3 button combos
Sent via that ninja standing right behind you
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
bakatenchu said:
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
Click to expand...
Click to collapse
eBay.
Maxxd01 said:
eBay.
Click to expand...
Click to collapse
Thanks a lot. Managed to get one that revived my phone well.
Related
Tried flashing an I9000 rom over a previous I9000 rom and now the phone doesn't boot up all the way. It gets past the AT&T World phone and Samsung splash screens but then goes to a blank screen in which the capacitive buttons are responsive and the phone will vibrate once, accompanied by 2 faster vibrations.
I've tried all the different button holds to get into download mode but none of them seem to work. ADB doesn't work either so Odin3 isn't an option atm.
Is my only option to buy a dongle to force download mode?
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Read the sticky and try the other method before getting a jig... might work
Sent from my SAMSUNG-SGH-I897 using XDA App
If all else fails you can make a cheap jig with 3 resistors and no soldering for under $1 from radio shack... search the captivate forum for 3 resistor jig
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
slifer315 said:
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Click to expand...
Click to collapse
Yah, forgot about the whole flashing back to stock thing since I hadn't used the thing for a couple weeks now. I'd only been using an Incredible for different roms. I think I'll just make a jig later.
dq13 said:
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
Click to expand...
Click to collapse
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
paperclips said:
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
Click to expand...
Click to collapse
Yes because you have no 3button combo. Your only bet would be to use a jig to get into download mode. And no I would not even try to do a nandroid backup because those can cause the same issue unless you are running the same Kernel as the backup.
Ok, have made the jig and am now in download mode. One problem though, even though I have the drivers installed for Windows X64, it is being read as an unknown device. So still no luck with Odin.
Any ideas?
Anyone help?
paperclips said:
Anyone help?
Click to expand...
Click to collapse
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
mcord11758 said:
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I got the computer to recognize the drivers after messing around with some stuff but now Odin3 is stuck at file analysis.
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
+ 1 make sure odin us fully booted prior to plugging phone in. you are almost there
Sent from my SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That's what I did and still nothing. I'll just keep trying it and let you know if I vet it working.
I had the same issue and still no luck. In download mode and even pointing it to drivers doesnt work. Like its not recognizing it as a android device even though its in download mode
I have videos for ODIN...Check my sig...
Ok, after about 1000 tries and getting ready to lose hope, I got it to work by holding it a different way. I think it was just a USB cord problem in the end. Thanks everyone for your help. Unfortunately, my other phone, Samsung Focus, took an unfortunate fall preceeding this fix making this win feel kind of insignificant.
So I got my jig and got into download... Now what. When I connect to AIO it says I need to enable usb, really how! Odin - start... Nothing. Odin - Master Clear... Nothing
Start odin first, then connect your phone. If nothing happens, try connecting it to a different usb port (one on the motherboard, at the back of your computer). If still nothing happens, chances are you don't have the proper drivers installed.
ok slow down, first off with AIO you DONT need download mode, you use it with your phone turned on normally and USB DEBUGGING on. the instructions are in AIO. read instructions, thats what they are there for.
also you dont need a jig unless the phone is bricked, there is the button method AND AIO uses ADB commands to AUTOMATICALLY put your phone into donwload when needed. and its only needed when using ODIN, some people need to open odin first, some not, but odin is the only time you use download mode.
modest_mandroid said:
If still nothing happens, chances are you don't have the proper drivers installed.
Click to expand...
Click to collapse
Wish this were the case. I've been using this LAPTOP for several months. Just flashed a new rom to my sons Cappy. No this systems all go, its my Cappy that's no show
When you plug the phone in and download mode starts, does the COM show up on Odin? If it does, you're good to go otherwise you need to get different drivers or maybe try using a different USB port or restart the laptop.
Trusselo said:
ok slow down, first off with AIO you DONT need download mode, you use it with your phone turned on normally and USB DEBUGGING on. the instructions are in AIO. read instructions, thats what they are there for.
also you dont need a jig unless the phone is bricked, there is the button method AND AIO uses ADB commands to AUTOMATICALLY put your phone into donwload when needed. and its only needed when using ODIN, some people need to open odin first, some not, but odin is the only time you use download mode.
Click to expand...
Click to collapse
Well thanks for the input. I am aware of all of this. STILL STUCK
with the info you have provided, and the questions you asked, thats about all the help anyone can give.
got into download... Now what. When I connect to AIO it says I need to enable usb, really how!
Click to expand...
Click to collapse
doesnt sound like you knew. sorry for not understanding.
Trusselo said:
doesnt sound like you knew. sorry for not understanding.
Click to expand...
Click to collapse
No problem. I did finally get it to flash back to stock
tomween1 said:
No problem. I did finally get it to flash back to stock
Click to expand...
Click to collapse
What was the problem?
modest_mandroid said:
What was the problem?
Click to expand...
Click to collapse
Truly I don't know. It finally went through the motions and flashed me back to stock.
tomween1 said:
Truly I don't know. It finally went through the motions and flashed me back to stock.
Click to expand...
Click to collapse
Wild.. wonder if you just have a bad cable or failing usb port or something..
I had this happened last night. Just finally worked about about 5 or more times. Just took some patience and constantly trying multiple ways with different ports. Although I have never had this problem before. Usually only took a maximum 2 tries.
Sent from my SAMSUNG-SGH-I897 using XDA App
Remember that ODIN is made by Samsung, so it's buggy as all hell
Hello everybody!
I've tried to find a solution, but without success.
Today I tried to install CWM on a french Galaxy S.
I've rooted the phone with z4root and after I started on download mod with adb.
Then with Odin3 I installed this file "Root-XX_OXA_JVK-v2.7-CWM3RFS.tar".
After that the phone rebooted automatically, unfortunately it's rebooting eachtime on the galaxy s logo.
The problem are that I can't boot on download mod or on CWM.
When the phone is off and I plug it on charger, it doesn't charge!
I think my phone is bricked.
Do you think you can help me or it's dead?
Is there a hard reboot procedure or something like that?
Thanks
I have exactly the same problem!
Are you sure you can't enter recovery? Volume up+home+power.
Sent from my GT-I9001 using xda premium
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Keep Trying
I know this is weird but keep hard resetting it. Try like 20 more times before you give up. Worked for me in the past I know it is weird. I had just flashed a new factory ROM.
I swear i have tried to enter the Recovery 20-30 times!!
It's fine
Hello,
I've bought an USB JIG for my SGS GT i9100 and I've been able to install ICS SLIM using Odin v3 1.7.
Very easy...
I advise this solution..
Thanks for your help.
Italia99 said:
I swear i have tried to enter the Recovery 20-30 times!!
Click to expand...
Click to collapse
did u try vol down + home + power button to go to download mode? if it can do that, the problem is just find some driver to make odin recognize your phone. search for "usb driver for samsung galaxy s" in google
then you can bring back your phone to live by downloading any rom you want and flash it via odin
ps. but if you cannot go to download mode, JIG USB with 301 K ohm will help you look at http://www.youtube.com/watch?v=Rdn5GoRjhn0
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Tical84 said:
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Click to expand...
Click to collapse
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
USB Connection
Italia99 said:
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Click to expand...
Click to collapse
Did you checked usb drivers, if not try to connect another samsung android device to your pc first. if another phone connected properly then problem in your phone only.
i suggest check this thread, if you think you completely lost your device - http://forum.xda-developers.com/showthread.php?t=819551
coepeq said:
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
Click to expand...
Click to collapse
Sorry, I should have been more specific. When I reinstalled the drivers I had actually uninstalled KIES and installed just the drivers.
I do have an update though but still can't get it to boot completely. Late last night I decided to try to get download mode to work one last time before passing out and pressing Vol-, Home and Power actually brought me to the recovery screen for the first time in my phone's life! "F YA!" was the only thing I could think at the time so I first went through and formatted/wiped every option I could find then installed the CM9 that I knew worked and now I get to the alien with the matrix-esque background and it stops there. I plugged it in and left it on that screen all night and that guy was still staring at me this morning. I tried download mode again but my computer still doesn't recognize it.
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
pankajs37 said:
but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
yeah....using adb is the only possibility i would take into consideration too
xsenman said:
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
Click to expand...
Click to collapse
thanks
pankajs37 said:
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
I accidentally Flashed a vibrant rom on my i9000. When I finally did get it into download mode with the JIG, I flashed back to stock firmware with ODIN and It totally ruined my phone.... The screen went all crazy and it kept rebooting faster than odin could do anything to it.
Just be careful. Im really not sure what happened But its pooched now for sure. JTAG is my only option on that one
if u dont own JIG or u dont know how to use ADB . the other way is
remove battery from phone /sim card / sd card
take the USB connect with ur Laptop or PC ( dont use it with charger it will not work)
connect with ur phone , then u will see the black screen being lil bit lighter
pres the 3 combos button to enter download mode and then flash ur ROM
this always worked for me , i hard bricked 4 times already my phone :/
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....