Related
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
alxpowa said:
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
Click to expand...
Click to collapse
Without download mode (VOL Down, Home, Pwr) then your only options is to either send it in for repair or try to get download mode working with a homemade Jig.
More on that Here.
I heard story's of people of forcing it to go into download mode using heat as well from say a hair dryer. But I do not recommend that.
"I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device"
Click to expand...
Click to collapse
Also I'm just curious as how you used odin without even having download mode? I'm having my doubts that when you said I know this question has been asked many times but you have not found a good answer is true. Next time do a bit more reading before just flashing your device. If you have even 1 thing your not sure about when flashing your phone that's 1 to many.
Puzzled also .
First question has to be can you actually get the phone into download mode .
Thats the big yellow download sign .
That has to be your first step get download mode on your phone .
Odin does not work without download mode so if no download mode who knows what you where trying to achieve or did achieve .
jje
No, I could get it in download mode BEFORE attempting to flash. Then I started Odin.
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
alxpowa said:
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
Click to expand...
Click to collapse
Remove Kies and reinstall that will make sure the drivers are OK .
Get into download mode if 3 buttons fail then you need the jig as posted.
Could try removing battery go to three button download mode and as you are holding down the buttons stick the battery back in to see if it enters download mode .
jje
Thanks guys for all the tips...! But nothing seems to work. It's just stuck at the connect error icon (?) and when I try to go in download mode either way, it just loops. (Icon appears and dissappears)
Two more questions:
1) If i have to get it repaired, do I contact Samsung or my provider ? (Bell in this case)
2) I'm at ease with electronics and stuff, so the jig should't be too hard to do for me, but is it guaranteed to work ? I mean, is it software-independant. Is there a problem that I can have that would prevent it to work ?
Thanks again!
Will work. Had the same issue as yours were I could not get into download mode and the phone would not boot either. The jig saved my phone. You can make your own or you can buy it on ebay. Good luck.
Good, should have all that at my job. Will try it.
Finally, it turns out that I called Bell and they told me that this was a common problem with these devices and they are sending me a new one!
Well.. whatever it was! haha
Thanks again for the help though!
EDIT:
odin crashed while going back to stock then
my phone will get to download mode buuuuut.. my computer doesnt recognize my phone...
i re-downloaded drivers and the phone is recognized however odin failed the 2 times i got it in dl mode(took about an hour to get it each time)... so i have a jig ordered but with odin not working im not feeling optimistic
nothing seems to happen when its plugged into the wall no battery icon. i reinstalled drivers hoping that would help with no luck.. i just got it back in dl mode after like an hour of it not turning on for me but it doesnt do anything once i get it there.
Get odin3 one click and use it in dl mode. It will brg ur phone back to stock
Sent from my SAMSUNG-SGH-I897 using XDA App
definately problem of bad USB..either cable or port....try using different USB cable or different computer....Use full odin by iCezar...its with minimum risk....specially very beneficial in cases like yours....
my pc doesnt see my phone. thats the issue i cant use odin. and the only thing my phone will do is glow black or go to download mode, idk if its charging but its getting hard to get it in dl mode, multiple tries atm no luck
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
donks232 said:
my pc doesnt see my phone. thats the issue i can use odin
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
Click to expand...
Click to collapse
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
viny2cool said:
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
Click to expand...
Click to collapse
nope this only happened AFTER my crash on odin. my pc has always seen the phone.
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
bigbyte.me said:
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
Click to expand...
Click to collapse
i tried that once of twice
need help
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
jvmiralles said:
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
Click to expand...
Click to collapse
thats not a big deal, just get it in download mode, and flash it with odin.
EDIT: might as well us this post to say what my computer says with usb since i got in in dl mode again...
USB device not recognized
one of the usb devices attached to this computer has
malfunctioned, and windows does not recognize it.
then something about for assistance in solving this issue click here
this has happened to me acouple times, the first was my fault I pull the usb before odin finished. I could get back into Download mode but Odin would not see the phone and computer would not recognize the phone either, device not recognized.
I tried rebooting, re-installing drivers etc. did not work.
but after an hour or so I finally got it to recognize and odin'd back to stock and back to flashing I was.
this is what I did hope it works for you.
1. disconnect all usb devices
2. un-install captivate drivers
3. reboot computer
4. goto device manager and verify that there is no USB device errors, if there is delete them and reboot again verify again in device manager.
5. install captivate drivers
6. reboot computer
7. start ODIN (DG or iCezars, iCezars is safer)
8. plug USB cable into the computer first (the one that came with the phone not an after market one)
9. hold both up and down volume buttons on the phone
10. plug the usb cable into the phone quickly to get into download mode (if I plugged the phone is slowly ODIN did not recognize the phone no COM, once I did it quick and it picked it up)
11. push START as soon as ODIN shows the COM1, COM2, COM3, COM4 etc (this had to be done quickly too, If i waited ODIN would show the COM but still would not start flashing back to stock)
this worked for me more than once I hope it helps you good luck
oh ok thanks, ill give that a try when i get off of work. i hope my battery doesnt die idk if its charging or not
well no luck even getting back to download mode. i bought a jig so i guess im waiting and trying while i wait.
i keep reading its possible to completely brick if odin fails... did i perma brick?
well a bump of sorts, the jig should come in the mail tomorrow. i miss my phone
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
donks232 said:
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
Click to expand...
Click to collapse
I have not had to do this but I know some others had issues with Odin and had to right click on Odin and run as administrator for it to work. Also the Odin 1 click should work in almost any situation to get you back to stock. The only worry (again never had the problem) is that depending on the build version of the phone you could lose the three button recovery. Look for the Odin that DG posted.
Sent from My KickAss Captivated CM7 OC'd 1.4Ghz/Undervolted
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Toddyn said:
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Click to expand...
Click to collapse
Did you try a jig?
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
Hello everybody!
I've tried to find a solution, but without success.
Today I tried to install CWM on a french Galaxy S.
I've rooted the phone with z4root and after I started on download mod with adb.
Then with Odin3 I installed this file "Root-XX_OXA_JVK-v2.7-CWM3RFS.tar".
After that the phone rebooted automatically, unfortunately it's rebooting eachtime on the galaxy s logo.
The problem are that I can't boot on download mod or on CWM.
When the phone is off and I plug it on charger, it doesn't charge!
I think my phone is bricked.
Do you think you can help me or it's dead?
Is there a hard reboot procedure or something like that?
Thanks
I have exactly the same problem!
Are you sure you can't enter recovery? Volume up+home+power.
Sent from my GT-I9001 using xda premium
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Keep Trying
I know this is weird but keep hard resetting it. Try like 20 more times before you give up. Worked for me in the past I know it is weird. I had just flashed a new factory ROM.
I swear i have tried to enter the Recovery 20-30 times!!
It's fine
Hello,
I've bought an USB JIG for my SGS GT i9100 and I've been able to install ICS SLIM using Odin v3 1.7.
Very easy...
I advise this solution..
Thanks for your help.
Italia99 said:
I swear i have tried to enter the Recovery 20-30 times!!
Click to expand...
Click to collapse
did u try vol down + home + power button to go to download mode? if it can do that, the problem is just find some driver to make odin recognize your phone. search for "usb driver for samsung galaxy s" in google
then you can bring back your phone to live by downloading any rom you want and flash it via odin
ps. but if you cannot go to download mode, JIG USB with 301 K ohm will help you look at http://www.youtube.com/watch?v=Rdn5GoRjhn0
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Tical84 said:
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Click to expand...
Click to collapse
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
USB Connection
Italia99 said:
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Click to expand...
Click to collapse
Did you checked usb drivers, if not try to connect another samsung android device to your pc first. if another phone connected properly then problem in your phone only.
i suggest check this thread, if you think you completely lost your device - http://forum.xda-developers.com/showthread.php?t=819551
coepeq said:
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
Click to expand...
Click to collapse
Sorry, I should have been more specific. When I reinstalled the drivers I had actually uninstalled KIES and installed just the drivers.
I do have an update though but still can't get it to boot completely. Late last night I decided to try to get download mode to work one last time before passing out and pressing Vol-, Home and Power actually brought me to the recovery screen for the first time in my phone's life! "F YA!" was the only thing I could think at the time so I first went through and formatted/wiped every option I could find then installed the CM9 that I knew worked and now I get to the alien with the matrix-esque background and it stops there. I plugged it in and left it on that screen all night and that guy was still staring at me this morning. I tried download mode again but my computer still doesn't recognize it.
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Maxxd01 said:
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Click to expand...
Click to collapse
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
xsenman said:
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
Click to expand...
Click to collapse
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Maxxd01 said:
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Click to expand...
Click to collapse
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
xsenman said:
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
Click to expand...
Click to collapse
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Maxxd01 said:
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Click to expand...
Click to collapse
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Maxxd01 said:
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Click to expand...
Click to collapse
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I'm wondering if my Google Nexus S drivers didn't not conflicted with the drivers I installed. I don't know.
Well, I'll try with another laptop, if that don't work, is it advisable to use a jig connector from a "trusted" seller? I'm asking because I already saw a comment or two along the about blewed (is this a word?) up phones.
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Latrop said:
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Do I risk blowing up the phone using JIG?
No the jig basicly makes it so a certain voltage signal is sent to the CPU triggering download mode no risk at all
Sent via that ninja standing right behind you
I tried with another laptop with very well configured drivers, and didn't worked. Still didn't detected by odin. When I tried with another galaxy it works, after entering download mode...
I'm not admired, because before the brick, I was not able to enter the download mode with como keys, I shouldnt be surprised that does not happen now..
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
xmavrickx2005 said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
Click to expand...
Click to collapse
That would be a good suggestion if could get into download mode Tried everything, including some other solutions that I found around the Web. Looks like the bootloader was corrupted since the beginning, and now that I need it more than ever (because the black screen of death phone-!-pc), I stucked until (hopefully) i get a JIG... Already bought one, have to wait a few days to receive it. Until then, I'm going to use a old nokia.
Jig is only option then install a stock gingerbread that will fix 3 button combos
Sent via that ninja standing right behind you
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
bakatenchu said:
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
Click to expand...
Click to collapse
eBay.
Maxxd01 said:
eBay.
Click to expand...
Click to collapse
Thanks a lot. Managed to get one that revived my phone well.