hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers
EranTerran said:
hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers
Click to expand...
Click to collapse
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....
Sami Kabir said:
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....
Click to expand...
Click to collapse
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.
EranTerran said:
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.
Click to expand...
Click to collapse
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.
shut_down said:
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.
Click to expand...
Click to collapse
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?
EranTerran said:
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?
Click to expand...
Click to collapse
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?
shut_down said:
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?
Click to expand...
Click to collapse
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG
EranTerran said:
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG
Click to expand...
Click to collapse
Actually you lost your download mode interface..
Just go to download mode.. If at you see black screen.. Still try flashing your phone with Odin..
Hope it may help you
Sent from my GT-S5830i using xda app-developers app
Related
Hi, i had one phone i9000 that was not going into recovery or download mode. SO, i tried flashing Aries_P-SBL.tar.md5 as PDA to enable recovery mode. I then got failed message and now phone is stuck on "PC ! Phone" logo. It wont go into recovery or download mode. Help
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
lcgmadeira said:
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
Click to expand...
Click to collapse
I think i need jig cable. DO you know how to make it or where to buy it from online?
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
lcgmadeira said:
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
Click to expand...
Click to collapse
Ok, will try again thanks
Hi, im off to making my own jig cable. Just need some advice after getting download mode should i first try repairing recovery mode by flashing Aries_P-SBL.tar.md5 or should i direct try flashing XXJPU via ODIN?
How did you resolve this i have the same here with my girlfriends samsung galaxy s. I can't come in download and recovery moe anymore. Pls have same one a solution?
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
cgingermany said:
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
Click to expand...
Click to collapse
This worked for me as well. I never thought to try the download anyway with that screen showing.
Thanks for the tip.
my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...
Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium
rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??
Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus
nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,
mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge
Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again
mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.
The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium
Any details about this 2 methods???
JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7
My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium
Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,
me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App
Hello guys.
I flashed the galaxy S on Odin with no files attached.
Now the phone will not respond at all. I have tried everything but, there is no lights or reaction as ever. Is this fixable?
I have ordered a JIG but i doent have to much expectations.
Regards Morten
It doesn't even turn on? Try taking the battery out for a few minutes.
Yes thats correct. It happend after flash.
Starting to think if the battery stopped working.
There is no sign of life at all.
The battery was fully charged.
Have tried your suggestion. With no luck.
Edit: Hmm, i have tested the battery now and it shows 4 volt between + and -.
So that shouldnt be the problem.
Is your phone can get into Download Mode? if can then can be safe
ayong chia said:
Is your phone can get into Download Mode? if can then can be safe
Click to expand...
Click to collapse
Phone will not even start
I'm having the same problem. Phone is completely unresponsive and I cannot get into stock recovery or D/L mode
Quada said:
I'm having the same problem. Phone is completely unresponsive and I cannot get into stock recovery or D/L mode
Click to expand...
Click to collapse
I am sorry to hear.
This is my friends phone. So i am sending the phone for fix at this place:
http://www.youtube.com/user/MobileTechVideos?feature=mhee
I hope they will fix it for me.
Morten
kalinkamaen said:
Hello guys.
I flashed the galaxy S on Odin with no files attached.
Now the phone will not respond at all. I have tried everything but, there is no lights or reaction as ever. Is this fixable?
I have ordered a JIG but i doent have to much expectations.
Regards Morten
Click to expand...
Click to collapse
Dear God. Why did you do that in the first place? I didn't even know such a thing is possible
Knowledge is Power. Guard it well.
snapper.fishes said:
Dear God. Why did you do that in the first place? I didn't even know such a thing is possible
Knowledge is Power. Guard it well.
Click to expand...
Click to collapse
Yes I know it was stupid. I had a PIT file connected.
And didnt know what i was doing. I couldnt dream of
the program would flash over bootloader.
But i learned and have to pay the price for it.
You can fix it with usb Jig or there is a tutorial for Captive that you can use on your phone and put it in download mode. I think for that you jave to install linux, hemindail and java. Also, you will need to install android sdk for adb reboot recovery command Search the forum, the fix is already there
Sent from my GT-I9000 using XDA App
Take out battery and hold 3 button combo for download mode. Than insert battery and it should throw u to downloading.
How is it possible to flash nothing? Doesn't odin warn you if you got "nothing"?
Should be fixed in next ver.
Download Mode "bricked"
Hi,
My Download Mode is working (3 buttons function), but the Win7 isn`t recognizing as Odin...(I`ve already tried to resolve USB drivers troubles but I think that is not the right option...other Samsung Androids are working weel)
So I am not able to flash anything trough Odin...and the CWM 3.0 show me many "E: unknown moun/ storage"...it`s impossible to restore or install an update.zip for example.
What can I do?
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
You put questions on 100 places, I asked you something one one of them and told that I9070 firmware will brick I9070P phone, or I9070P firmware will brick I9070 phone.
srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
Yeah, u should be remove this thread first. Back to the thread where your issue that has been discussed before.
yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!
Droids king said:
yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!
Click to expand...
Click to collapse
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??
srikanth_gadde said:
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??
Click to expand...
Click to collapse
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1
Droids king said:
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1
Click to expand...
Click to collapse
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
Pull out battery - put it back in, and retry to go in download mod.
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:
Droids king said:
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:
Click to expand...
Click to collapse
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down
srikanth_gadde said:
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down
Click to expand...
Click to collapse
have u tried to flash firmware ?
Droids king said:
have u tried to flash firmware ?
Click to expand...
Click to collapse
how can i flash ?? without download mode
and odin is not detecting my phone when i try the three key combination with usb to my pc
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
then what is this?
if u r unable to do so then get it repaired it would cost u about 1000-1500 inr