[Q] phone not turning on - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????

srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
You put questions on 100 places, I asked you something one one of them and told that I9070 firmware will brick I9070P phone, or I9070P firmware will brick I9070 phone.

srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
Yeah, u should be remove this thread first. Back to the thread where your issue that has been discussed before.

yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!

Droids king said:
yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!
Click to expand...
Click to collapse
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??

srikanth_gadde said:
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??
Click to expand...
Click to collapse
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1

Droids king said:
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1
Click to expand...
Click to collapse
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that

srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
Pull out battery - put it back in, and retry to go in download mod.

srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:

Droids king said:
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:
Click to expand...
Click to collapse
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down

srikanth_gadde said:
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down
Click to expand...
Click to collapse
have u tried to flash firmware ?

Droids king said:
have u tried to flash firmware ?
Click to expand...
Click to collapse
how can i flash ?? without download mode
and odin is not detecting my phone when i try the three key combination with usb to my pc

srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
then what is this?
if u r unable to do so then get it repaired it would cost u about 1000-1500 inr

Related

struck on logo with blinking screen

Hello.. Please solve my problem my galaxy mini didn't start it remains blinking on the logo, even i can't enter into the recovery the same thing happens but I can enter into download mode and ramdump mode.. I ve flashed 2.3.6 indian version.
cv022 said:
Hello.. Please solve my problem my galaxy mini didn't start it remains blinking on the logo, even i can't enter into the recovery the same thing happens but I can enter into download mode and ramdump mode.. I ve flashed 2.3.6 indian version.
Click to expand...
Click to collapse
flash stock rom with odin
Lol ultimate fix, flash stock with odin :d
yackovsky said:
Lol ultimate fix, flash stock with odin :d
Click to expand...
Click to collapse
I have tried many times but after completing the flashing process, while the phone rebooting remains blinking without starting up..
cv022 said:
Hello.. Please solve my problem my galaxy mini didn't start it remains blinking on the logo, even i can't enter into the recovery the same thing happens but I can enter into download mode and ramdump mode.. I ve flashed 2.3.6 indian version.
Click to expand...
Click to collapse
Flash froyo and then try to upgrade to gingerbread
Sent from my GT-S5570 using xda premium
did you tried to upgrade to gingerbread with non bootloader firmware
then just upgrade with bootloader firmware
dheeraj (dhlalit11) said:
did you tried to upgrade to gingerbread with non bootloader firmware
then just upgrade with bootloader firmware
Click to expand...
Click to collapse
tried but the same result.....
i got the same problem.
now do as i tell
flash stock rom using odin
it will show same problem ,now move into normal recovery mode.[not CWM]
wipe data
Again flash stock rom using odin. IT Works
I did same worked for me......TRY it WORKS......
Shank73 said:
i got the same problem.
now do as i tell
flash stock rom using odin
it will show same problem ,now move into normal recovery mode.[not CWM]
wipe data
Again flash stock rom using odin. IT Works
I did same worked for me......TRY it WORKS......
Click to expand...
Click to collapse
After flashing also I can't enter into recovery... the phone blinks with showing samsung logo when i press the combination..
did you released the keys when you see the Samsung screen
cv022 said:
After flashing also I can't enter into recovery... the phone blinks with showing samsung logo when i press the combination..
Click to expand...
Click to collapse
yaa u need to realese buttons when it shows samsung
dheeraj (dhlalit11) said:
did you released the keys when you see the Samsung screen
Click to expand...
Click to collapse
Ya I did but the same result..
cv022 said:
Ya I did but the same result..
Click to expand...
Click to collapse
ur doing something wrong
becoz i also had same problem......
This worked for me...it should move in recovery mod
Shank73 said:
ur doing something wrong
becoz i also had same problem......
This worked for me...it should move in recovery mod
Click to expand...
Click to collapse
sorry yaar I have tried but now no samsung logo. I can only enter into download mode only. And after flashing while rebooting the phone starts blinking. Can anyone tell me wether its a brick problem or mother board failure or any other type of problem. The warranty has been expired and I have taken it out to samsung care and they told me that the mother board failure and it costs rs 4000 for the replacement. Shall I show it to outside samsung care or what?????? Please solve my problem please............
cv022 said:
sorry yaar I have tried but now no samsung logo. I can only enter into download mode only. And after flashing while rebooting the phone starts blinking. Can anyone tell me wether its a brick problem or mother board failure or any other type of problem. The warranty has been expired and I have taken it out to samsung care and they told me that the mother board failure and it costs rs 4000 for the replacement. Shall I show it to outside samsung care or what?????? Please solve my problem please............
Click to expand...
Click to collapse
no its not just keep trying the methods
meanwhile try to flash a four package file
dheeraj (dhlalit11) said:
no its not just keep trying the methods
meanwhile try to flash a four package file
Click to expand...
Click to collapse
ya i have tried it too.. Can any one tell wether it is a case of mother board failure???
Once again I will clarify my problem to u that I can enter only into download mode and PC detects the phone and the mobile does not start instead it starts blinking....
cv022 said:
ya i have tried it too.. Can any one tell wether it is a case of mother board failure???
Once again I will clarify my problem to u that I can enter only into download mode and PC detects the phone and the mobile does not start instead it starts blinking....
Click to expand...
Click to collapse
it isnt brick
i had exactly the same problem that u r telling..
now my phone is working fine
dheeraj (dhlalit11) said:
no its not just keep trying the methods
meanwhile try to flash a four package file
Click to expand...
Click to collapse
Shank73 said:
it isnt brick
i had exactly the same problem that u r telling..
now my phone is working fine
Click to expand...
Click to collapse
then its very good, can u tell me exactly wat was ur problem and how u managed to overcome that...
cv022 said:
then its very good, can u tell me exactly wat was ur problem and how u managed to overcome that...
Click to expand...
Click to collapse
frst i flashed some rom used for a day
then again flashed stock rom...i got same problem told (screen struck & samsung logo blinking)
i ws trying for a 3 hrs & finally
then i did as told in earlier post & it worked......
Shank73 said:
frst i flashed some rom used for a day
then again flashed stock rom...i got same problem told (screen struck & samsung logo blinking)
i ws trying for a 3 hrs & finally
then i did as told in earlier post & it worked......
Click to expand...
Click to collapse
now the phone won't start, whenever I connect it to PC the screen starts blinking...

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

Galaxy s advance broke

hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers
EranTerran said:
hey guys, i tried installing JB on my advance, but some thing went wrong and its not booting or going to download mode or recovery , just a black screen. its sound like its hard brick, but when im connecting it to my PC, the PC beeps like theres some thing connecting. i didn't used JIG and i dont think it will work. is there some thing i can do before i need to send it to JTAG repair?
sorry for my english and thank you for your answers
Click to expand...
Click to collapse
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....
Sami Kabir said:
Can you tell me exactly how this happened? Like how you were installing JB? And is your phone i9070 or i9070P - because they have different firmwares, if you flash the wrong one then it will most probably hard brick your phone....
Click to expand...
Click to collapse
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.
EranTerran said:
i installed JB from odin,i probably disconnect the cable to early, i have i9070 and the guide i used didn't mention what model i need.
Click to expand...
Click to collapse
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.
shut_down said:
Odin said PASS before you disconnected? Phone rebooted to recovery before disconnecting? Or when did you unplug it? What FW did you use? You have its name on file, copy/paste it here.
More informations.
Click to expand...
Click to collapse
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?
EranTerran said:
no, its said rebooting and i guess thats what cause the brick, it took half hour so unplug it. i used I9070DXAMD1_I9070OLBAME1_HOME.TAR file. so i guess i need a jtag repair?
Click to expand...
Click to collapse
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?
shut_down said:
If you pull out cable when it said rebooting, then I think that didn't cause the problem. Now no download mode at all? Tried to pull out battery and put back, than to go to download mode?
Click to expand...
Click to collapse
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG
EranTerran said:
i tried every thing, but i still cant get into download mode. the only thing i didn't use is JIG
Click to expand...
Click to collapse
Actually you lost your download mode interface..
Just go to download mode.. If at you see black screen.. Still try flashing your phone with Odin..
Hope it may help you
Sent from my GT-S5830i using xda app-developers app

[Q] Why doesnt my phone turn on????

I just tried to install new android version for my samsung galaxy s advance, i installed it with odin and it was offical firmware AND NOW MY PHONE WONT TURN ON!!!!!! what do i have to do????? please answer quickly!!! please !!!!
Can you access download mode? Of you can't I fear you'll have to take it to a Samsung assistence center
Sent from my iPad using Tapatalk
okey
no i cant access download mode...but what could happen to my phone>?????
promart said:
no i cant access download mode...but what could happen to my phone>?????
Click to expand...
Click to collapse
If you flashed I9070 firmware on I9070P phone you hardbricked it.
When I go to the store I bought it will they fix it?for how much?
promart2 said:
When I go to the store I bought it will they fix it?for how much?
Click to expand...
Click to collapse
They need to change motherboard, I am not sure how much but it is not little.
You did that? Flashed wrong firmware?
promart said:
I just tried to install new android version for my samsung galaxy s advance, i installed it with odin and it was offical firmware AND NOW MY PHONE WONT TURN ON!!!!!! what do i have to do????? please answer quickly!!! please !!!!
Click to expand...
Click to collapse
Does it still power on and wont i continu with boot ????
or does nothing happen at all ?
i had faillure with booting once but when i connected to pc and start up odin , it still recognized the phone and was able to flash back to stock and download other rom which is now on my phone ..

I bricked my Ace

Hello, today when i tried to install http://forum.xda-developers.com/showthread.php?p=48806481#post48806481 (CWM Recovery), i bricked my phone .
I have bootloop with samsung logo . I cant boot phone to normal mode or recovery . The "ARM9" and download modes are working.
I tried to install stock rom with odin, but its stucked on "setupConnection" step.
Is there any way how to fix & bring my phone to life again?
Thanks.
Please, help me . My battery will be soon dead :crying:
Do you have an older version of cwm on ur phone?
Switch off ur phone and try to boot into recovery..
Sent from my Micromax A110 using XDA Free mobile app
I cant .:laugh: boot into recovery ...
Minnimous said:
I cant .:laugh: boot into recovery ...
Click to expand...
Click to collapse
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
JanniekM00 said:
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
Click to expand...
Click to collapse
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Minnimous said:
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Click to expand...
Click to collapse
Use a another usb cable or use another computer
JanniekM00 said:
Use a another usb cable or use another computer
Click to expand...
Click to collapse
I tried it on Windows 8 , but it was not recognized (unknown device) and it wasnt in Odin, on windows 7 it was recognized bud stucked ... i dont have more computers. I tried 2 different cables , but none was original (i dont have original, so i tried cables from sony and prestigio.
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
If you can't fix your device via odin you need JTAG
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
Have you got the Samsung's drivers installed on your computer? I assume you are using the corret Odin version, so let's go you can try it
Prepare you computer to use Odin and flash a new rom, remove battery and connect your galaxy ace to your computer. Then insert the battery holding VOLUME DOWN + POWER + HOME BUTTONS. Odin should detect your device, (Yellow rectangle) so you are ready ro START the process

Categories

Resources