Does anyone else have issues with their headphones staying in the headphone jack? I have tried with my beat tours, sennheiser ie8's and even the rca in-line converter in the car/ rack system. The slightest bump, and the headphones jack pops out, losing my music.. Does anyone else have this issue? i thought it just needed to be broken in, but it is consistently pushing the plug out. Att seems to be a b*tch about exchanging the phone..
http://forum.xda-developers.com/showthread.php?t=1336595
Related
PPC Techs XDA/SX56 2.5mm/3.5mm Audio Headset Adaptor
This adaptor converts the proprietary 4 conductor Pocket PC phone jack found on the XDA to a STD 2.5mm headset jack and 3.5mm stereo headphone Jack, and includes a PPCPE compatible answer/mute button. The adaptor cable is approximately 5" long.
Click to expand...
Click to collapse
http://www.expansys.com/product.asp?code=PPCPADPT01
What are your thoughts. Seems like a good product. Be able to use some decent headphones for listening to those mp3z . . .
Anybody used one of these?
is the answer/mute button only for those 2 functions or is that module also acting as a microphone (don't think so)? looks good to me but i use the headset adaptor i bought from this internet site based in hong kong. check out:
http://pc-mobile.net/pxdaa.jpg (the website is http://pc-mobile.net)
it comes with a standard 2.5 mm jack for the xda. the wire is on a retractable mechanism to avoid tangling. at the other end is the stereo phone jack which serves as an answer/end button and as a microphone as well. there's a single headphone jack connected which uses a 3.5mm plug. when you want to listen to the toons using your 2-headphone set; you simply unplug the jack and insert any 3.5mm plug-based headset. in effect you can use any 3.5 headset as handsfree.
costs 26usd but services are 5-stars for me.
cheers
Anyone tried this adaptor from pc-moblie.net? The sound quality is good or bad?
i doubt that it could damage the quality so you can hear it unless you connect it to a stereo's lineIn and play it out using real speakers
those headsets are too limited imho to take much damage from a few connectors
However, all these things are not suitable for xdaII.
I bought one from pc-mobile and the quality is good. However, since the new xdaII got 2 buttons in its handsfree design, this product from pc-mobile is not fully compatible. You can hear from it but you can't pick up or end call from it as compared to xda1 you can.
I hope they can produce another product which is fully compatible with xda2. Otherwise, I may have to go for bluetooth but really worry about the battery.
Also, can I or is there anyone using the bluetooth handsfree for mp3 playing????? I doubt that very much.
I do really like the pc-mobile handsfree which is retractable and handy.
Any alternative in the market?? You got the adaptor but I think its only good for audio MP3 listening. If you attach another headsfree to the adaptor for business use (don't know whether we can...), you will have 2 buttons (one for the adaptor and one for the handsfree) which is quite funny !
Does somebody else have this problem and find a solution?
Do most people use bluetooth?
*Damn* !
Been creating a cable myself, tried it yesterdaynight late....
The damn thing didn't answer the phone when i pressed te button.
I cut the audio-out cord and trew the cable away, because i tought the mic didn't work....
Now i read this.... Guess the mic did work, but the answerbutton didn't.
Now i hope i can rewire the audio-out cabels again, so i haven't been soldering for nothing last night
Headphone adapter for HTC magic
Hello.
On the HTC magic, there isnt a 2.5 or a 3.5 headphone jack! there is only a mini USB jack. Does anyone know where i could get a mini USB jack adapter to turn it into a regular headphone jack?
Even if anybody knows what kind of mini USB jack comes on the HTC then that would be lots of help! because ive already purchased one that fit, but didnt work so it must have been a different type.
Thanks in advance!
http://www.google.dk/search?hl=da&q=extusb+to+minijack&btnG=Søg&meta=&aq=f&oq=
I hate making new threads but I can't seem to find an answer. Maybe I'm using the wrong keywords.
I use my N1 in my car alot. It's my main source for my music and hand's free calling while driving. I use the aux jack on my stereo to the N1 for music.
When I get a call it would ring though the speakers and I would touch the slider to accept the call. The caller would hear me crystal clear and I would hear them though the speakers just fine.
Now when I get a call, they can't hear me. They say I sound like I'm far far away. I can hear them just fine. But I look like a madman in my car screaming and yelling just to be heard.
So what I have to do now, is answer the call, and touch speaker, which only plays the voice though the speaker phone. They hear me crystal clear but sound is no longer going to the car speakers.
Anybody have this problem or know what's causing it or even a push in the right direction?
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
Hope this helps.
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
xiophyte said:
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
I was thinking on buying the Belkin one with the mic right at the aux jack.
Hope this helps.
Click to expand...
Click to collapse
RogerPodacter said:
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
Click to expand...
Click to collapse
Exactly, it DID work. I can't pin point when it happened for me. I was thinking maybe it was when I went from Eclair to Froyo?
I'm almost positive that using the phone over Aux out broken with the update to Froyo. Has anyone tried this yet with Gingerbread on the N1 or with an NS? I'm hoping they fixed this, it's a really, really frustrating problem.
My fear is that everyone at Google got free car docks so they won't ever fix it because it's never a problem for them.
I also have the exact same problem. Thought it never worked for me, I only recently sets up my car mount with aux. Anybody found a solution?
Hello everybody,
I own the bose on-ear, and I love them.
http://www.bose.co.uk/GB/en/home-an...bose-audio-headphones/bose-on-ear-headphones/
I would like to use them with my htc hd2 while calling.
Since the audio cable from the device to the headphones is removable, is it possible to have a 3.5mm female/male cable with a mic and audio controls in it?
I mean something like this:
http://www.amazon.co.uk/StarTech-co...1_1?ie=UTF8&s=computers&qid=1288395589&sr=8-1
with mic and controls attached
thx
http://cgi.ebay.co.uk/1-6m-Earphone...uting_CablesConnectors_RL&hash=item5d2b73c739
I've just found this.. but it's really ugly..
anyone?
EDIT:
found also on bose.co.uk.. but £40 for a cable! pure madness!!
http://www.bose.co.uk/GB/en/home-an...-on-ear-headphones-mobile-communications-kit/
Anyone??????
please I really need it!!!
Quote from here
forum.xda-developers.com/showthread.php?t=613732
quote
I've done a slightly different take on this, I snipped the lead between the control module and the headphones and soldered a inline 3.5mm jack socket. This enables me to plug my Sennheiser HD-25 headphones in without having to damage the lead and in fact plug any standard set of headphones in whilst keeping the full functionality of the remote module...
unquote [/code]
Is there anyone else here who uses a BOSE in-ear headphones?
I've got one and I read a few reviews AFTER I bought it that it's not loud enough. I'm not sure if this is something to do with the phone or the product is just like this.
I've had Klipsch Speakers for my PC before but unsure if their earphones are also very good compared to BOSE.
Hey all, I've got an issue. I can listen to music just great on my N6 via 3.5mm standard non-mic or mic earbuds. I went to plug the N6 into my stereo today and the music kept playing out of the speaker when I put the jack in, but when I take it out it pauses the music. AudioFX also knows when the jack is in because the EQ switches to headphones. It's not just music that does this either, YouTube keeps playing through the speakers as well. I've tried 2 different jacks, both are just 3.5mm to RCA stereo plugs. However, I had an old pair of broken Apple headphones with a mic that I cut up and attached a 3.5mm female onto the end instead of earbuds. The setup is N6 -> modified Apple earbuds -> 3.5mm to RCA -> Stereo. This actually worked, god knows why. I want to know if anyone else had this issue, and what to do about it because I'd rather not return the phone to T-Mobile for a replacement.
I've got a strange problem with my M7, currently running CM12.1. I use a cassette to AUX adapter on my old cars radio to play music through the speakers. When I start playing the music when it's plugged in, it seems to skip the songs indefinitely, as though you're holding the skip button, this happens on both the spotify application and the 'music' application. My guess is the phone thinks the cassette adapter is sending it commands or something like those in-line controls on earphones. This only happens when using the adapter, works fine using my sennheiser earphones. I doubt it's the adapter itself, because I've bought two of them and the same problem arose. It used to work about a year ago, could damage to the phones 3.5mm jack cause this? Remember, my earphones work perfectly.
Cheers.
bump
jkownz said:
I've got a strange problem with my M7, currently running CM12.1. I use a cassette to AUX adapter on my old cars radio to play music through the speakers. When I start playing the music when it's plugged in, it seems to skip the songs indefinitely, as though you're holding the skip button, this happens on both the spotify application and the 'music' application. My guess is the phone thinks the cassette adapter is sending it commands or something like those in-line controls on earphones. This only happens when using the adapter, works fine using my sennheiser earphones. I doubt it's the adapter itself, because I've bought two of them and the same problem arose. It used to work about a year ago, could damage to the phones 3.5mm jack cause this? Remember, my earphones work perfectly.
Cheers.
Click to expand...
Click to collapse
Probably the cassette adapter, I don't think they designed those to be used with smartphones back in the days. I would insert the cassette adapter in the radio and take some voltage and resistance readings on the jack. There shouldn't be any voltage, if there is, that could damage your phone. Compares the resistance of each contacts on the aux jack with a set of earbuds that are equipped with a "next" button (and press it), you'll maybe found the same resistance value... Might also only be caused by the audio jack not having the same connections than a standard audio jack.