Anybody got auto connect working with a Tunelink Auto? - Nexus S Accessories

Just dropped $100 on a bluetooth accessory for my car called a Tunelink auto (I'm new so I can't post links--just google it.) Of course the thing doesn't work as advertised...when I step out of range of it and then come back into range it connects to my phone but the music doesn't play through the speakers of my car. I've noticed various results with different ROMs, but none work completely 100% right. Anybody have this working? Forums are dead for the Tunelink website and tech support was useless.

I signed up for the Tunelink BETA a while back but didn't get in. However, they gave me 50% off the cost of the device for signing up. Here are my notes:
1. You HAVE to have Bluetooth on before starting your car. The Tunelink will attempt to connect to your phone only once. After that, you have to manually go into BT settings to pair it with the Tunelink.
2. If you are in ACC mode in your car and connected to Tunelink, once you start your engine, the Tunelink will lose its connection and you will have to manually set it again. I believe this is due to the stop and start of the Tunelink being faster than the stop and start of your bluetooth connection.
3. (in response to your question) It looks like from what i've stated above, Tunelink only attempts to pair once, when the engine is started. If you go out of range and come back, you'll have to manually pair it yourself. (i just gave this a second thought. in what situation would you get that far away from your car while it is running? in my city, that is an invitation for someone to drive away with it.)
4. Support has been great for me. I had an issue with my 1st gen Tunelink and they sent me a prepaid shipping label to send it in so they could update the firmware.
Conclusion: The TuneLink is definitely not worth 100 bucks since you can't even make calls through it. Even at the 50 i paid, it was quite a stretch. The nice thing about it, though, is that any phone with a bluetooth connection can play music through it. It may be possible to set up a Tasker event to force pair with the TuneLink once it is in range, but i have not been able to figure it out.

Return it and get the micus blueridge check amazon for the best price on it. You have to connect it but it sounds awesome and works very well
Sent from my Nexus S 4G using XDA App

Related

Sending phone book to Bluetooth car stereo

I have a new car stereo (JVC) that has bluetooth. How do I send my Vivid's phone book to the stereo? The stereo manual says it is possible, but is the Vivid set up to do the send?
Initiate it from the car... Thats easiest. Most of the time it'll ask automatically when you first connect them up. A screen will popup on the vivid asking for permission.
Sent from my HTC PH39100 using xda premium
I followed the instructions in my vehicle manual (BT came with the car) to pair and connect to my Vivid's BT. The car system downloaded the contacts list from my phone. It took a few minutes. But I didn't have to do anything special.
I have done the initialization of the stereo three times now and when I pair for the first time, it never asks me about the phone book.
Still no success
So I had previously been using only google contacts in my people list. I exported to SD, then imported them directly to phone. Then, in people, I selected only viewing from phone. (Can't see an option to bulk copy to SIM) On the stereo, I deleted the Vivid, then reconnected/paired. I did see the phone book share prompt on the Vivid, and checked always. Pair was success, but the phone book import is still not available. JVC suggests reattempting the pair until successful, or until the onset of insanity (almost there!).
Can anyone with success give me details such as brand of stereo, where your contacts were, if there was any delay in the importation, did it require a reboot, did it require a re-pair.
All other bluetoothing operations are fine, except for direct dialing from the Stereo's number pad, but that isn't as critical as the phone book. I almost never direct dial anymore.
I recently installed a bt jvc unit into my wifes car. I know I was able to get the phone book to transfer from her sprint evo. I will look into it to see how I did it and post. I'm 99% sure her contacts are only google and not phone. I'll double check that too.
Keep in mind that some stereos just don't like some phones, I have a sony head-deck with bt/a2dp that is supposed to do the address book thing and I tried for weeks with mine, all different roms and applications and pairing methods and eventually I just gave up, but the same phone pairs and shares the address book almost instantly with the BT stereos that come standard in the toyota yaris and toyota camry's at work...
JVC says it might be because the parking brake wire isn't connected properly. This faulty connection also inhibits the Mic. Since that isn't working either, it has to be the solution. Update coming after the fix.
You can't know your limits until you exceed them.
It was the parking brake ground wire. I had assumed that the ground wire was only to keep video from playing on the display while driving (park brake off).
You can't know your limits until you exceed them.

Nexus 7, Note Phone, Tablet Talk, Copilot Navigation, Ford Sync, Griffin car charger

I just took a small trip and used the Tablet Talk linked via bluetooth to my Note phone with the Note synced via bluetooth to Ford SYNC. Purchased a Griffin car charger allegedly rated for 2 amps.
The good news. It worked, mostly. The charger does charge but no way in heck it puts out enough to run the tablet - didn't keep up with the battery so I will have to replace it.
Got a call - it showed on the nexus and I talked via SYNC. When I received the call the Copilot paused and Tablet Talk popped up, showing the name of the caller. I hung up the call from the Nexus. Everything worked great except I had no audio out of the Nexus 7. Gonna have to try to troubleshoot this.
I miss my Fusion
Sounds like quite the setup there...
If it's any consolation, in the brief time I've had when playing with Tablet Talk, I don't have audio-out either. I can control whether it goes to speakerphone or answer/hangup, amongst other things, but it's just acting like a remote and and audio sent or received is handled by the phone, rather than the tablet. I'm thinking it's a limitation of the app at this stage and that it may be fully functional in future versions. There was a message that came up when enabling the option to show incoming calls but I can't remember what it said now..
refx said:
If it's any consolation, in the brief time I've had when playing with Tablet Talk, I don't have audio-out either. I can control whether it goes to speakerphone or answer/hangup, amongst other things, but it's just acting like a remote and and audio sent or received is handled by the phone, rather than the tablet. I'm thinking it's a limitation of the app at this stage and that it may be fully functional in future versions. There was a message that came up when enabling the option to show incoming calls but I can't remember what it said now..
Click to expand...
Click to collapse
Thanks for the reply.
It appears at this point that enabling Tablet Talk ALSO cuts audio from Co-pilot. I still haven't had time to really attempt any troubleshooting though; could be some type of setting is wrong or it could be Tablet Talk does need to work on their software. I do like (not in car) the ability to send and receive texts but do wish the interface was a bit different.
Now to find a car charger that actually works.
If you want to use the phone part of TabletTalk, you must go in and enable it. It will make your tablet act like the phone when incoming calls comes in.
I just talked to dev a short bit ago, and there is a newer version about to be put up on Play Store..
i love that app, along with theming it to change the look and feel of it. it works flawlessly.

The Bluetooth thread.

As the title states, let's get some interesting Bluetooth accessories in here.
headphones, ear buds, a2dp adaptors, keyboards, earpieces etc.
I know there are individual topics for some of these, but let's get them and more, all right here, condensed, for ease and quality.
PM me and I'll add it to the second post, as long as it has a review/post link attached.
Sent from my t0lteCAN [SGH-i317M] using Tapatalk 4 Beta
reserved.
Sent from my t0lteCAN [SGH-i317M] using Tapatalk 4 Beta
You can go ahead and check out my review summary thread (link in my sig) to pick out bt headphones/earphones and keyboard links. There is also a thread about Pebble smart watch which supposed to be an awesome bt accessory to bring out remote notification display from N2 in your pocket to your wrist. Plus, someone mentioned MOGA Pro in another thread which is a really cool bt game controller. Then, you also have Jawbone Jambox to bring sound of N2 externally through bt connection. It could have been mentioned in the forum, but I don't remember when/where. At least those I mentioned are the most essential bt accessories.
My best bluetooth accessory is my Ford Edge.
There is really cool one on Kickstarter right now
Vertus - Spread the Music Without Wires
https://www.kickstarter.com/projects/119477083/vertus-same-bluetooth-audio-on-two-different-speak
TabGuy said:
My best bluetooth accessory is my Ford Edge.
Click to expand...
Click to collapse
do you have that issue with SYNC where when you leave the car and come back, you have to go back to bluetooth audio because it doesnt stay on bluetooth by default but goes to line in instead?
mottyengel said:
do you have that issue with SYNC where when you leave the car and come back, you have to go back to bluetooth audio because it doesnt stay on bluetooth by default but goes to line in instead?
Click to expand...
Click to collapse
No, the bluetooth always connects when I come back to the car. I never see line in unless I turn the phone's bluetooth off.
For the most part it starts playing also. Unfortunately, when it starts playing it always starts playing BeyondPod podcasting app. Even if I was playing Pandora when I got out of the car it starts up BeyondPod when I get back in the car. I'm not sure why this happens. I'd like it to continue playing using the app that was running when I got out of the car.
It's not terribly annoying, though. I have an NFC tag in my car that will start Pandora. I just tap that and BeyondPod yields to Pandora.
I've got the Motorola motoactv gps watch. Best watch out there and works great with the N2.
Sent from my SCH-I605 using xda app-developers app
TabGuy said:
No, the bluetooth always connects when I come back to the car. I never see line in unless I turn the phone's bluetooth off.
For the most part it starts playing also. Unfortunately, when it starts playing it always starts playing BeyondPod podcasting app. Even if I was playing Pandora when I got out of the car it starts up BeyondPod when I get back in the car. I'm not sure why this happens. I'd like it to continue playing using the app that was running when I got out of the car.
It's not terribly annoying, though. I have an NFC tag in my car that will start Pandora. I just tap that and BeyondPod yields to Pandora.
Click to expand...
Click to collapse
Thank your lucky stars that you and i are having this conversation then. I'm guessing you havent ever updated sync? They put out an update a while back, (before i bought my car, so i didnt have the option) that took that away. Any SYNC system that is up to date brings you back to line in EVERY time you turn off the car. imagine that for a second. The reason they did that, was because some people complained that they would get into their car and music would just start playing, so instead of spending time to recode it system to let you choose a default, they just force line in on you. and nothing is being done to change this.
So, to sum up, if you ever get the urge to update the system, dont.
http://boards.synccommunity.com/n/pfx/forum.aspx?tsn=1&nav=messages&webtag=fordsyncmb&tid=4822
mottyengel said:
Thank your lucky stars that you and i are having this conversation then. I'm guessing you havent ever updated sync? They put out an update a while back, (before i bought my car, so i didnt have the option) that took that away. Any SYNC system that is up to date brings you back to line in EVERY time you turn off the car. imagine that for a second. The reason they did that, was because some people complained that they would get into their car and music would just start playing, so instead of spending time to recode it system to let you choose a default, they just force line in on you. and nothing is being done to change this.
So, to sum up, if you ever get the urge to update the system, dont.
http://boards.synccommunity.com/n/pfx/forum.aspx?tsn=1&nav=messages&webtag=fordsyncmb&tid=4822
Click to expand...
Click to collapse
Thanks for the heads up. Mine is a 2009 Edge and I did an update back in 2009 but haven't done once since. I guess if it ain't broke, don't fix it, eh?
VitaliyUvakin said:
There is really cool one on Kickstarter right now
Vertus - Spread the Music Without Wires
https://www.kickstarter.com/projects/119477083/vertus-same-bluetooth-audio-on-two-different-speak
Click to expand...
Click to collapse
I backed that just the other day. My car has bluetooth, but only streams calls and not audio. Planning on plugging it in to my AUX port to stream audio. The female-female adapter is pretty nifty.
I got an Avantree Roxa http://www.avantree.com/Product-Blu...-roxa-aptx-decoding-technology-added_677.html
Great BT receiver, Bluetooth 4, aptX, USB charging socket 1A, mulipoint 8 devices, great sound quality due to aptX
best a2dp with noise cancellation over the ear
as the title says, I'm looking to improve my audio experience via bt over the ear. I has to be a2dp (streaming audio) and good noise cancellation. My current Moto Elite Silver is great but noise cancellation is so-so, some people hear some whistle at times. I spend a lot of time driving and need to use bt over the ear.
What are you experiences/suggestions/advise? Appreciate...
I have a jawbone era and I'm impressed. I owned the moto Sliver for a yeat amd while it was way more comfortable, it didn't offer that dio quality that the jawbone has. I initially bought Bose new bt headset but I wasn't impressed at all, except that it was comfortable.
I do have some problems with my jawbone that are all user error (i think), but once I get the sorted I'll be happy.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[Q] Issues with Moto X and two Bluetooth devices

I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.
gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.
fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.
Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....
I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.
640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.
I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse

[Q] Bluetooth Connection Issue (Redux)

Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john
I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.
I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app
jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john
A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.
My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.
Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john

Categories

Resources