when i update galaxy gt_ i9000 with odin 1.83 it stay in setup connection or by odin 1.7 stay on leave cs and stay at that up to 2 hour
Is the phone in Download Mode?
make sure kies is off and your drivers are injstalled
Yea i have the same problem... i can flash with heimdall but odin is just stuck at setup connection -.-' don't know why but i reinstalled the drivers i again downloaded a new odin but no luck
1. Try to restart The phone and the PC
2. Try to change the USB slot
I had the same problem, and I did those things. After that, it worked
tried that... no luck...i really know how to flash as i am on this forum for a while now and i have never had any problem... a have literally tried everything... will try on another computer
Related
I've read and searched as much as I can but haven't seen anyone else have this problem.
I flashed Froyo XWJP6 using Kies and changing the registry entries and I am generally happy with the rom but I've seen others posted I wanted to try out. My problem is that I have so far been unsuccessful getting odin to connect when I go into the rom download screen (down+home+power). Odin and kies both connect when on the home screen.
I understand that since its Froyo with e3 recovery that update.zip files need to be signed so odin is needed to either install a new rom, install clockworkmod or install a kernel that has e2 recovery.
Is there any way I can get odin to connect or downgrade to e2 recovery without going through odin? Or any other solution to downgrade to 2.1 and start again?
It feels like i'm missing something but I don't have the experience to figure out what it is.
Any help would be much appreciated.
Pete
This happens to me every now and then as well.What I would do is to re-install the samsung usb driver in my laptop. After that, odin sees my phone again in DL mode.
Sent from my GT-I9000 using XDA App
Make sure you're connecting in the right sequence for odin.
- start odin with phone unplugged
- boot phone into d/l mode
- connect phone to pc via usb
thanks very much for replying. I tried a different computer and it seems to be a dodgy usb port/driver problem on my works computer I had tried originally.
Hi guys,
i have my I9000 upgraded to froyo and rooted without any problem. it had vodoo lagfix also with no problem
today, i installed (( galaxy s tweaker )) app and i dont remember waht i did but the device then shut down and reboot but it stuck to the boot screen that contains galaxy and samsung logo and it keeps restarting the same screen many times and nothing further happens.
i tried the recovery mood ( factory reset, restore, format ) but nothing works.
i tried to connect it to my pc and reinstall the rom from odin but odin is not recognizing my device even in downloading mode and i got this notification from windows that usb device was not recognized ..
please please please, help me
thank you in advance
life art said:
Hi guys,
i have my I9000 upgraded to froyo and rooted without any problem. it had vodoo lagfix also with no problem
today, i installed (( galaxy s tweaker )) app and i dont remember waht i did but the device then shut down and reboot but it stuck to the boot screen that contains galaxy and samsung logo and it keeps restarting the same screen many times and nothing further happens.
i tried the recovery mood ( factory reset, restore, format ) but nothing works.
i tried to connect it to my pc and reinstall the rom from odin but odin is not recognizing my device even in downloading mode and i got this notification from windows that usb device was not recognized ..
please please please, help me
thank you in advance
Click to expand...
Click to collapse
Im guessing kies does'nt kies reconize phone? maybe uninstall then reinstall kies which will reinstall drivers. Have you tried pulling out the battery for 10mins and then retrying?
hi tragusman
unfortunately, both kies and odin dont recognize my phone though i tried to reinstall kies .
i tried to remove the battery for hours but it didn't work also
life art said:
hi tragusman
unfortunately, both kies and odin dont recognize my phone though i tried to reinstall kies .
i tried to remove the battery for hours but it didn't work also
Click to expand...
Click to collapse
If you can get into download mode then Heimdall will be able to detect your phone using either Windows or Linux. Heimdall works on OS X also however a fixed bootloader is required.
update:
i installed the driver on my pc from softpedia
i restarted my pc and odin can recognize my phone now
i flashed froyo rom and its not working . i will try another rom and see what will happen
i installed 2.1 rom followed by 2.2 rom and its working like a charm
problem solved
thanx
Hi all
I stupidly upgraded to 2.2.1 the other night and for the last 2 days I have been trying to connect to the phone via Odin so I can apply the 2e Recovery and put Darky 8.0 on.
The problem I am having is that every time I try to apply the PDA file (from xda-devs), it just gets stuck on SetupConnection (I have booted the phone into Recovery mode). I have tried it on my Win7 x64 PC and I have tried it on my WinXP x86 laptop, same result. I have tried Odin 1.0, 1.3 and 1.7. I have uninstalled the Kies drivers, installed older ones, installed newer ones...nothing. I have tried removing the SD card, nothing.
Odin sees the phone when I plug it in, it show me the COM port and it says "Added!".
I'm at my wits end! 2.2.1 has fixed nothing for what I use, GPS is still rubbish, OneClickLagFix doesn't work on this version and they've put in this ridiculous 3e Recovery. So basically Samsung will not only not give us (in the UK) a decent version of their ridiculous firmware, but they have taken away our ability to fix up their garbage firmwares!
If anyone could help me get around this Odin problem, I would be most grateful! Thanks
If not, I'm going to get shut of this pile of pants and get a proper Android phone (which I don't want, because I really can see the potential)
Cheers!
You could try Heimdall instead of Odin its on the forum .
Odin sees the phone when I plug it in, it show me the COM port and it says "Added!"
Sounds like a duff file maybe .
I have flashed CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
at least twenty times in the last month without a problem .
jje
JJEgan said:
You could try Heimdall instead of Odin its on the forum .
Odin sees the phone when I plug it in, it show me the COM port and it says "Added!"
Sounds like a duff file maybe .
I have flashed CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
at least twenty times in the last month without a problem .
jje
Click to expand...
Click to collapse
Hi
I have Heimdall, but I don't see which box to put the tar file in... There are several options under PDA/Code
Thanks for your reply
Edit: OK so my best guess is to put it under zImage. Done that, connected phone in Recovery for BML and the Start button stays greyed out.
Edit2: Do I need a .pit file? The instructions for CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1 don't mention one...
Edit3: Still with Heimdall, I unzipped the .tar so I have zImage unpacked, the Start button lit up, I click it:"Failed to detect a compatible device"
Edit4: Tried to downgrade to 2.1 Eclair using samfirmwares. Odin goes through md5 checks, they all pass and then....SetupConnection... What's going on?
Solved!
I used the Down Volume instead of Up Volume.
Yes! I solved too with this board. Thanks!
Not sure if this has been answered before, I have been trying to flash back to stock firmware after using cm7. However odin doesnt seem to be working as it doesnt recognise my phone. (also tried installing nexus s drivers but that doesnt seem to help.) Can anyone offer some advce? Thanks ahead.
Are you sure you have all neccesary windows drivers ?
Start Kies connect phone shrink Kies then start Odin see if your phone is found .
Turn Kies of before flashing if it does find the phone .
jje
Odin + Tick repartition with Stock firmware
taken from original thread:
http://forum.cyanogenmod.com/topic/15278-gt-i9000-cyanogenmod-7-faq-user-discussion/
EDIT: Sorry didnt read whole post!!
Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.
Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T
Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App
if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium
I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.
picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?