Related
DID I JUST BRICK MY PHONE??
tried flashing the i9000 rom... got messed up sometime after flashing csc and pda.... now i can boot to recovery menu and get odin to recognize but im getting an error
copy_multi_carrier from: ATT
multicsc : can not acces to /system/csc/ATT/system/
copy_common_data
then it stalls.. my power button doesnt work to reboot system now...
Even though odin recognizes i hit start and nothing happens..
can anyone help.. i will donate and make it worth your time..
No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App
can you clear something up is Android System Recovery the same as download mode??
ok this thread can be deleted.. im a noob.. kjpdx throw me a link to donate.. i figured it out by myself but atleast you replied..
Two different modes. Download mode shows an Android holding a shovel and Recovery mode is where you would install update.zips.
Needs to be in Download mode when installing roms and kernels with Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dont worry about it, glad i could help.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.
uehsgerg said:
Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.
Click to expand...
Click to collapse
You can't have Kies and Odin running at the same time =P
^lol that solved my problem too! thanks!
Zilch25 said:
You can't have Kies and Odin running at the same time =P
Click to expand...
Click to collapse
Will try it later. Thanks
It is fixed. Thank you for the help. I just need to lauch Odin first prior to plug-in my phone. Now, I don't have bricked Galaxy anymore. Thanks
KJPDX said:
No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)
cliffgardner said:
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)
Click to expand...
Click to collapse
That reason is that voodoo doesn't work with 2.2
For the sake of your wallet, I would read the threads more carefully before flashing new roms if I were you. I'm not trying to be a ****, but this issue was addressed many times in the cognition thread. I'm all for learning from others on this forum after they make the mistakes
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.
I updated my rooted Captivate from Froyo (official build) to Gingerbread 2.3.5 (official build) today, and the process seemed to go smoothly until the phone needed to reboot at the end of the update. I found that my phone was showing the At&t animation and then going to the Galaxy S animation and then repeating the process instead of booting properly. I do not know why because I unrooted my phone using Super One Click before I updated. I am freaking out, what should I do now?
how did you update? what method? official stock? or official plus a CWM kernel?
there was no point of un-rooting. flashing stock will un-root a captivate. flashing a custom rom, it will be rooted already...
when in doubt, flash to stock again. but make sure its correct stock.. once again what method and where did you get it?
TRusselo said:
how did you update? what method? official stock? or official plus a CWM kernel?
there was no point of un-rooting. flashing stock will un-root a captivate. flashing a custom rom, it will be rooted already...
when in doubt, flash to stock again. but make sure its correct stock.. once again what method and where did you get it?
Click to expand...
Click to collapse
I updated (from official Froyo stock) using Kies Mini to the Samsung official stock (Gingerbread 2.3.5). I have never flashed before. How can I do this and how can I find the correct stock to flash to?
As a note to anyone who might find themselves stuck in the same predicament as I was in, the Odin3 One Click Downloader program by "designgears" is very useful. Using the button combinations I found here: http://forum.xda-developers.com/showthread.php?t=1351224 I was able to get my phone into Download Mode. I then used the Odin3 program (http://forum.xda-developers.com/showthread.php?t=731989) to painlessly flash my phone to the stock 2.1 rom. This was just a matter of connecting my phone to my computer, running Odin3, and clicking "start". After my phone rebooted, using Kies Mini, I updated to 2.2 Froyo. I waited for my phone to reboot, disconnected it from the computer, reconnected it to the computer and then (using Kies Mini again) updated my phone to Gingerbread 2.3.5 (which, so far, I am very happy with).
WARNING: Make sure you wait before Odin3 is completely done running!! When I was running the program I thought it was finished and almost unplugged my phone prematurely (I am fairly sure this would have ruined my phone, but do not quote me on this). If in doubt, just wait a few minutes.
captivateman111 said:
Will this Odin3 One Click Downloader by Designgears fix my problem?
Link: http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
Just flash a KK4 rom or leaked KK4 in dev section. Should fix it. BTW never use kies....its ebil....
I'm having a similar problem, with my Captivate stuck in a loop at the AT&T splash screen. However, I can't access Recovery mode or get to download mode - I've tried every 3-button combo variant I've found on the forums, as well as taking out the battery, holding the volume +/- keys, plugging into USB & re-inserting the battery.
Would it be safe to assume that the only way I'm going to be able to get into download mode now is with a USB jig?
EDIT: Prior to this, I was running Froyo 2.2 - went to flash the ICS for Captivate ROM - it didn't work, but I could still get into recovery mode. So I simply booted into recovery, did a factory reset and clicked the "reboot" option on CWM. That's when it started boot looping.
Okay, so I got a USB jig and put it into download mode. Plugged it into a free rear USB port and Vista started automatically installing drivers for it, so I ran the Heimdall One-Click Stock. It saw my device as connected so I went ahead and clicked "flash", and I got an error msg saying the device wasn't found. Prompted me to install drivers, so I followed the prompts and attempted to install the drivers from the zadig program.
The first time, the install timed out after 5 minutes. Rebooted my PC and ran the Heimdall One-Click utility again, and this time after a few seconds I got a prompt saying that the drivers have been successfully installed. However, in the taskbar I got a pop-up saying that driver installation failed.
Now, every time I plug into a USB port I get an error of "USB device not recognized", and when I run the Heimdall One-Click util it says my device isn't connected. I've tried it on two seperate PCs (both running Vista), on multiple USB ports and still get the same error.
Should I just uninstall all the Samsung drivers and reinstall?
EDIT FOR FUTURE REFERENCE: Hi! If you're reading this, you may've had the same problem. What worked for me was uninstalling Samsung Kies, uninstalling the Samsung mobile phone drivers, going into regedit and deleting all SAMSUNG registry keys. After that, reboot, put your device into download mode, plug into your USB Port, run the Heimdall One-Click package of your choice and just wait!
Malheurit said:
Okay, so I got a USB jig and put it into download mode. Plugged it into a free rear USB port and Vista started automatically installing drivers for it, so I ran the Heimdall One-Click Stock. It saw my device as connected so I went ahead and clicked "flash", and I got an error msg saying the device wasn't found. Prompted me to install drivers, so I followed the prompts and attempted to install the drivers from the zadig program.
The first time, the install timed out after 5 minutes. Rebooted my PC and ran the Heimdall One-Click utility again, and this time after a few seconds I got a prompt saying that the drivers have been successfully installed. However, in the taskbar I got a pop-up saying that driver installation failed.
Now, every time I plug into a USB port I get an error of "USB device not recognized", and when I run the Heimdall One-Click util it says my device isn't connected. I've tried it on two seperate PCs (both running Vista), on multiple USB ports and still get the same error.
Should I just uninstall all the Samsung drivers and reinstall?
Click to expand...
Click to collapse
You can't go wrong by uninstalling both sets of drivers (Samsung and Heimdall), rebooting, and reinstalling just the Heimdall Drivers. Heimdall also only installs drivers for one USB port, so trying different ports is key (I know you already did, and you're on the right track).
Here's a good Heimdall thread if you need it: http://forum.xda-developers.com/showthread.php?t=1113195
Download jig will save you
Sent from my SPH-D710 using XDA App
I had the exact same problem....Kies info said to wait til I got to idle screen before unplugging usb. No dice. Infinte loop. Got into recovery and did a factory reset and BINGO...Gingerbread...yum!
ok so i used kies to upgrade to gb then used odin to flash a rom problem os i guess it was t mobile rom so when booting up i see a att screen then gets stuck on galaxys 4g t mobile screen still have cmw in red but cannot read anything or mount tried flashing from cmw no luck there tried one click to stock no luck so any help would be awesome thanks
noobin said:
ok so i used kies to upgrade to gb then used odin to flash a rom problem os i guess it was t mobile rom so when booting up i see a att screen then gets stuck on galaxys 4g t mobile screen still have cmw in red but cannot read anything or mount tried flashing from cmw no luck there tried one click to stock no luck so any help would be awesome thanks
Click to expand...
Click to collapse
Wait you have a Captivate running a Tmo 4g variant rom?
Sent from my ICS powered Captivate using Tapatalk
How?
russhayden said:
I had the exact same problem....Kies info said to wait til I got to idle screen before unplugging usb. No dice. Infinte loop. Got into recovery and did a factory reset and BINGO...Gingerbread...yum!
Click to expand...
Click to collapse
I'm in the boot loop too. How did you get into recovery?
^
Hold volume + & - and power button until phone boots and u see the at&t screen Then release buttons.
Sent from my SAMSUNG-SGH-I777 using xda premium
Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.
Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T
Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App
if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium
I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.
picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?
I am now having a SGS with a S3 recovery kernel and a missing modem.
Hence I cannot connect USB and use odin/kies/adb.
I can get files onto the SDCARD(Using Airdroid) but flashing any update.zip are rejected by the 3e recovery signature verification.
The phone currently is working but no PHONE functionality.
Firmware: 2.3.3
Baseband: Unknown
Kernel: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.ZSJV6
How can I flash a ROM to revive the phone.
I tried rooting with z4root without success hence no way to bring it to 2e recovery
Is there a signed ROM or Modem zip that can be used to flash the phone?
Any help would be much appreciated!
If you can get to download mode Odin is your best bet. Have you tried different usb cords or different ports on your computer. Did you at one time have your phone connected with kies if so you should have drivers on your computer. Oh one other thing when using Odin make sure kies is not running in the background. I would flash a Darkyrom RE version. It roots and puts a 2e recovery on your phone and you should be able to go anywhere from there. One other trick to get your phone recognized by Odin is to have Odin running do 3 button combo for download mode and plug USB cable in before releasing 3 buttons. Oh also try different versions of Odin 1.3 or 1.7 some phones seem to like one better than others. There are some good guides on darkyrom site as well.
Sent from my GT-I9000M using XDA
Shooper said:
If you can get to download mode Odin is your best bet. Have you tried different usb cords or different ports on your computer. Did you at one time have your phone connected with kies if so you should have drivers on your computer. Oh one other thing when using Odin make sure kies is not running in the background. I would flash a Darkyrom RE version. It roots and puts a 2e recovery on your phone and you should be able to go anywhere from there. One other trick to get your phone recognized by Odin is to have Odin running do 3 button combo for download mode and plug USB cable in before releasing 3 buttons. Oh also try different versions of Odin 1.3 or 1.7 some phones seem to like one better than others. There are some good guides on darkyrom site as well.
Sent from my GT-I9000M using XDA
Click to expand...
Click to collapse
Thanks for the suggestion.
Had done almost everything I know of on it in the way u had described.
SGS is functioning in all ways(Recovery + Download mode) except it does not get recognized vis USB and Phone/BT is not working.
Most recovery relies on getting ODIN to work but without USB recognized on PC(tried 3 PCs) it's pretty much a dead end I'm in.
I had been flashing Hero, SGS and SGS2 and this time I'm pretty stump.